RESUMO
A novel kind of protective apparel for handicapped persons has been created with bio-based electrospun nanofibrous (NFs) membranes. Hydrophobic membranes with fine polylactic acid (PLA) NFs had a smooth, bead-less structure with an average diameter of 950 nm. The hydrophilic layer has a similar pattern but a smaller fiber diameter dispersion and an average diameter of 750 nm. The silica nanoparticle-modified super-hydrophobic top layer (contact angle, ~153°) repels water and keeps the user dry. Super-hydrophilic silver nanoparticles in the fabric's bottom layer react with perspiration to kill microorganisms. The fabric's porosity (avg. 1.2-1.5 µm) allows for breathability, while silica nanoparticles boost infrared radiation reflection, keeping users cool on hot days. The dual-layer textile has 4.9 MPa ultimate tensile strength and 68 % elongation compared to the membrane's super-hydrophobic and super-hydrophilic layers. Wearing protective clothes reduced hand temperature by 25 % in direct sunlight and 13 % in a sun simulator with 1 Sun. This fabric will work well for adult diapers, outdoor clothing, and disability accessories. Overall, the protective textiles may improve the quality of life for disabled and elderly people by providing usable textile items adapted to their needs.
Assuntos
Pessoas com Deficiência , Interações Hidrofóbicas e Hidrofílicas , Nanofibras , Poliésteres , Nanofibras/química , Humanos , Poliésteres/química , Membranas Artificiais , Roupa de Proteção , Prata/química , Têxteis , Dióxido de Silício/química , Nanopartículas Metálicas/química , Resistência à TraçãoRESUMO
Hydrogen storage in solid-state materials represents a promising avenue for advancing hydrogen storage technologies, driven by their potential for high efficiency, reduced risk, and cost-effectiveness. Among the employed materials, magnesium borohydride (Mg(BH4)2) stands out for its exceptional characteristics, with a gravimetric capacity of 14.9â wt% and a volumetric hydrogen density capacity of 146â kg/m3. However, the practical application of Mg(BH4)2 is impeded by challenges such as high desorption temperatures (≥ 270 °C), sluggish kinetics, poor reversibility, and the formation of unexpected byproducts like diborane. To address these limitations, extensive research efforts have been directed towards enhancing the hydrogen storage properties of Mg(BH4)2. Various strategies have been explored, including incorporating catalysts or additives, nanoconfinement of Mg(BH4)2 within porous supports, and modifications involving metal alloys and compositional adjustments. These approaches are actively under investigation for improving the performance of Mg(BH4)2-based hydrogen storage systems. This review provides a comprehensive survey of recent advancements in Mg(BH4)2 research, focusing on experimental findings related to nanoconfined Mg(BH4)2 and modified thermodynamic processes aimed at enabling hydrogen release at lower temperatures by mitigating sluggish kinetics. Precisely, nanostructuring techniques, catalyst-mediated nanoconfinement methodologies, and alloy/compositional modifications will be elucidated, highlighting their potential to enhance hydrogen storage properties and overcome existing limitations. Furthermore, this review also discusses the challenges encountered in utilizing Mg(BH4)2 for hydrogen storage applications and offers insights into the prospects of this material. By synthesizing the latest research findings and identifying areas for further exploration, this review aims to contribute to the ongoing efforts toward realizing the full potential of Mg(BH4)2 as a viable solution for hydrogen storage in diverse applications.
RESUMO
This study aims to enhance the post-training evaluation of the annual performance agreement (APA) training organized by the Bangladesh Public Administration Training Centre (BPATC), the apex training institute for civil servants. Utilizing fuzzy-set qualitative comparative analysis (fsQCA) and artificial neural network (ANN) techniques within Kirkpatrick's four-stage model framework, data were collected from a self-administered questionnaire survey of 71 in-service civil servants who participated in the APA training program. This study employs an asymmetric, non-linear model analyzed through a configurational approach and ANN to explore interrelationships among the four Kirkpatrick levels namely, reaction, learning, behavior, and results. Findings indicate that trainees were satisfied across all levels, identifying a non-linear relationship among these levels in post-training evaluation process. The research highlights that "learning skills" are most significant in the APA post-training evaluation, followed by behavior, results, and reaction. Theoretically, this research advances Kirkpatrick's model and adds to the literature on public service post-training evaluation. Practically, it recommends prioritizing strategies that address cognitive barriers to enhance training effectiveness. This study's innovative approach lies in its concurrent use of fsQCA and ANN methods to analyze the success or failure of APA-related trainees, offering alternative pathways to desired outcomes and contrasting traditional quantitative methods that provide a single solution. The findings have practical implications for public service training institutions and bureaucratic policymakers involved in capacity development, guiding the creation of more effective in-service training courses for public officials. The methodology and analysis can be applied in other contexts, allowing bureaucratic policymakers to replicate these findings in their learning institutes to identify unique configurations that lead to successful or unsuccessful training outcomes, adopt effective strategies, and avoid detrimental ones.
Assuntos
Redes Neurais de Computação , Humanos , Bangladesh , Inquéritos e Questionários , Masculino , Feminino , Adulto , AprendizagemRESUMO
Electrocatalytic water splitting is a promising alternative to produce high purity hydrogen gas as the green substitute for renewable energy. Thus, development of electrocatalysts for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are vital to improve the efficiency of the water splitting process particularly based on transition metals which has been explored extensively to replace the highly active electrocatalytic activity of the iridium and ruthenium metals-based electrocatalysts. In situ growth of the material on a conductive substrate has also been proven to have the capability to lower down the overpotential value significantly. On top of that, the presence of substrate has given a massive impact on the morphology of the electrocatalyst. Among the conductive substrates that have been widely explored in the field of electrochemistry are the copper based substrates mainly copper foam, copper foil and copper mesh. Copper-based substrates possess unique properties such as low in cost, high tensile strength, excellent conductor of heat and electricity, ultraporous with well-integrated hierarchical structure and non-corrosive in nature. In this review, the recent advancements of HER and OER electrocatalysts grown on copper-based substrates has been critically discussed, focusing on their morphology, design, and preparation methods of the nanoarrays.
RESUMO
Several leaks appeared in a mild steel (MS) pipe jet nozzle installed in a direct impact test rig after a few months of operation in erosive flow at the Centre for Erosion-Corrosion Research. The locations of perforation leaks were primarily upstream, but severe wall thinning was also noticed adjacent to the exit section. In this paper, a failure analysis was carried out on the leaking of a pipe jet nozzle, and the results are discussed in detail. The investigation carried out includes visual observation, scanning electron microscopy, 3D scanning, energy-dispersive spectroscopy, and laser profilometry measurements. In addition, numerical simulations based on computational fluid dynamics (CFD) and the discrete phase model (DPM) were conducted to investigate the root cause of the failure of leaks in the pipe jet nozzle. Further CFD-DPM simulations were performed on three different pipe jet designs for liquid-solid flow conditions, and were compared to find an alternative design to prevent the failure of the pipe jet nozzles. It was found that the increase in turbulence along with multiple impacts of particles on the wall generate leaks and cracks in the pipe jet nozzle. Moreover, the CFD-DPM showed a five-fold reduction in the maximum erosion rate; this was observed in the replacement of failed pipes with the proposed alternative nozzle pipe design featuring a chamfer reducer section. The CFD-DPM analysis of all geometric configurations showed that alteration of reducer section design has the greatest impact on erosive wear mitigation.
RESUMO
A perfect protective fabric for handicapped individuals must be lightweight, waterproof, breathable, and able to absorb water. We present a multifunctional protective fabric in which one side is hydrophobic based on the intrinsic hydrophobic biopolymer polylactic acid (PLA) to keep the disabled person from getting wet, while the other side is super-hydrophilic due to embedded silica nanoparticles (NPs) to keep the disabled person safe from a sudden spill of water or other beverage on their skin or clothes. The porosity of the electrospun nanofibrous structure allows the fabric to be breathable, and the silica NPs play an important role as a perfect infrared reflector to keep the person's clothing cool on warm days. Adding white NPs, such as silicon dioxide, onto or into the textile fibers is an effective method for producing thermally insulated materials. Due to their ability to efficiently block UV light, NPs in a network keep the body cool. Such a multifunctional fabric might be ideal for adult bibs and aprons, outdoor clothing, and other amenities for individuals with disabilities.
RESUMO
The problem of industrial wastewater containing heavy metals is always a big concern, especially Cu2+, which interprets the soil activity in farmland and leaves a negative impact on the environment by damaging the health of animals. Various methods have been proposed as countermeasures against heavy-metal contaminations, and, as a part of this, an electrospun nanofibrous adsorption method for wastewater treatment is presented as an alternative. Poly(lactic acid) (PLA) is a biopolymer with an intrinsic hydrophobic property that has been considered one of the sustainable nanofibrous adsorbents for carrying adsorbate. Due to the hydrophobic nature of PLA, it is difficult to adsorb Cu2+ contained in wastewater. In this study, the hydrophilic PLA/poly(ethylene glycol)-poly(propylene glycol)-poly(ethylene glycol) (PEG-PPG-PEG) nanofibrous adsorbents with different silicon dioxide (SiO2) concentrations were successfully prepared by electrospinning. A hydrophilic group of PEG-PPG-PEG was imparted in PLA by the blending method. The prepared PLA/PEG-PPG-PEG/SiO2 nanofibrous adsorbents were analyzed with their morphological, contact angle analysis, and chemical structure. The Cu2+ adsorption capacities of the different PLA/PEG-PPG-PEG/SiO2 nanofibrous adsorbents were also investigated. The adsorption results indicated that the Cu2+ removal capacity of PLA/PEG-PPG-PEG/SiO2 nanofibrous adsorbents was higher than that of pure ones. Additionally, as an affinity nanofibrous adsorbent, its adsorption capacity was maintained after multiple recycling processes (desorption and re-adsorption). It is expected to be a promising nanofibrous adsorbents that will adsorb Cu2+ for wastewater treatment.
RESUMO
Novel poly(vinyl alcohol) (PVA)/poly(vinyl butyral-vinyl alcohol) (P(VB-VA)) films with improved hydrophobicity were prepared from poly(vinyl acetate) (PVAc)/poly(vinyl butyral) (PVB) blend films with various mass ratios by saponification in a heterogeneous medium. The successful conversion of PVAc to PVA and PVAc/PVB to PVA/P(VB-VA) films was confirmed by Fourier transform infrared spectrometry, X-ray diffraction, and proton nuclear magnetic resonance analysis. This study also shows that the degree of saponification (DS) depends on the saponification time. The maximum DS of 99.99% was obtained at 96 h of saponification for all films, and the presence of PVB did not affect the DS at saponification times of 48-96 h. The effects of the PVAc/PVB blend ratio before and after saponification were determined by contact angle measurement, and the hydrophobicity was found to increase in both cases with increasing PVB content. Additionally, all the films exhibited improved mechanical properties after saponification, and the treated films possessed an unusual porous and uneven surface, in contrast with the untreated films. The prepared films with improved hydrophobicity can be used for various applications, such as biomaterials, filters, and medical devices.
RESUMO
Carbon nanodots (CNDs)-embedded pullulan (PUL) nanofibers were developed and successfully applied for sulfathiazole (STZ) removal from wastewater streams for the first time. The CNDs were incorporated into PUL at 0.0%, 1.0%, 2.0%, and 3.0% (w/w) to produce M1, M2, M3, and M4 nanofibers (PUL-NFs), respectively. The produced PUL-NFs were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction analysis (XRD), thermal gravimetric analysis (TGA) and Differential scanning calorimetry (DSC) and applied for STZ removal from aqueous solutions through pH, kinetics, and equilibrium batch sorption trials. A pH range of 4.0-6.0 was observed to be optimal for maximum STZ removal. Pseudo-second order, intraparticle diffusion, and Elovich models were suitably fitted to kinetics adsorption data (R2 = 0.82-0.99), whereas Dubinin-Radushkevich, Freundlich, and Langmuir isotherms were fitted to equilibrium adsorption data (R2= 0.88-0.99). STZ adsorption capacity of PUL-NFs improved as the amount of embedded CNDs increased. Maximum STZ adsorption capacities of the synthesized PUL-NFs were in the order of: M4 > M3 > M2 > M1 (133.68, 124.27, 93.09, and 35.04 mg g-1, respectively). Lewis acid-base reaction and π-π electron donor-acceptor interactions were the key STZ removal mechanisms under an acidic environment, whereas H-bonding and diffusion were key under a basic environment. Therefore, CNDs-embedded PUL-NFs could be employed as an environmentally friendly, efficient, and non-toxic adsorbent to remove STZ from wastewater streams.
RESUMO
Fog is a resource with great potential to capture fresh water from the atmosphere, regardless of the geographical and hydrological conditions. Micro-sized fog collection requires materials with hydrophilic/phobic patterns. In this study, we prepared hydrophilic poly(lactic acid) (PLA)/poly(ethylene glycol)-poly(propyl glycol)-poly(ethylene glycol) (PEG-PPG-PEG) blended nanofiber membranes with various PEG-PPG-PEG concentrations by electrospinning. Changes in the morphological and chemical properties, surface wettability, and thermal stability of the PLA/PEG-PPG-PEG composite nanofiber membranes were confirmed using field-emission scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction, contact angle testing, and thermogravimetric analysis. As the PEG-PPG-PEG content of the nanofiber membranes increased, their hydrophilicity increased. Water stability, membrane porosity, and water transport rate tests were also conducted to observe the behavior of the hydrophilic PLA nanocomposite membranes in aqueous media. Finally, we applied the PLA-based membranes as fog collectors. As the PEG-PPG-PEG content of the nanofiber membranes increased, their ability to collect fog increased by over 40% compared with that collected by a pure PLA membrane. The prepared membranes not only improve the ability of fog collectors to harvest water but also broaden the use of PLA-based membranes in multiple applications, including tissue engineering, drug delivery, scaffolds, and pharmaceuticals.
RESUMO
Silver has become a potent agent that can be effectively applied in nanostructured nanomaterials with various shapes and sizes against antibacterial applications. Silver nanoparticle (Ag NP) based-antimicrobial agents play a major role in different applications, including biomedical applications, as surface treatment and coatings, in chemical and food industries, and for agricultural productivity. Due to advancements in nanoscience and nanotechnology, different methods have been used to prepare Ag NPs with sizes and shapes reducing toxicity for antibacterial applications. Studies have shown that Ag NPs are largely dependent on basic structural parameters, such as size, shape, and chemical composition, which play a significant role in preparing the appropriate formulation for the desired applications. Therefore, this review focuses on the important parameters that affect the surface interaction/state of Ag NPs and their influence on antimicrobial activities, which are essential for designing future applications. The mode of action of Ag NPs as antibacterial agents will also be discussed.
RESUMO
BACKGROUND: Phosphate (Pi) deficiency severely affects crop growth and productivity, including wheat, therefore it is necessary to develop cultivars with enhanced Pi-deficiency tolerance. However, the underlying mechanism of Pi-deficiency tolerance in wheat is still elusive. Two contrasting wheat cultivars, low-Pi tolerant Kenong199 (KN199) and low-Pi sensitive Chinese Spring (CS) were used to reveal adaptations in response to Pi deficiency at the morphological, physiological, metabolic, and molecular levels. RESULTS: KN199 was more tolerant to Pi deficiency than CS with significantly increased root biomass and R/S ratio. Root traits, the total root length, total root surface area, and total root volume, were remarkably enhanced by Pi deficiency in KN199. The shoot total P and soluble Pi concentrations of KN199 were significantly higher than those of CS, but not in roots. In KN199, high Pi level in shoots is a higher priority than that in roots under Pi deficiency. It was probably due to differentially regulation in the miR399-mediated signaling network between the shoots of the two cultivars. The Pi deficiency-induced root architecture adaptation in KN199 was attributed to the regulation of the hormone-mediated signaling (ethylene, gibberellin, and jasmonates). The expression of genes associated with root development and Pi uptake was enhanced in KN199. Some primary metabolites (amino acids and organic acids) were significantly accumulated in roots of KN199 under Pi deficiency. CONCLUSIONS: The low-Pi tolerant wheat cultivar KN199 possessed greater morphological and primary metabolic adaptations in roots than CS under Pi deficiency. The adaption and the underlying molecular mechanisms in wheat provide a better understanding of the Pi-deficiency tolerance and the strategies for improving Pi efficiency in wheat.
Assuntos
Adaptação Fisiológica/genética , Adaptação Fisiológica/fisiologia , Fosfatos/deficiência , Fosfatos/metabolismo , Raízes de Plantas/metabolismo , Brotos de Planta/metabolismo , Triticum/genética , Triticum/metabolismo , Produtos Agrícolas/genética , Produtos Agrícolas/metabolismo , Variação Genética , Genótipo , Melhoramento Vegetal , Plântula/metabolismoRESUMO
Quantum dot-sensitized solar cells (QDSSCs) are significant energy-producing devices due to their remarkable capability to growing sunshine and produce many electrons/holes pairs, easy manufacturing, and low cost. However, their power conversion efficiency (4%) is usually worse than that of dye-sensitized solar cells (≤12%); this is mainly due to their narrow absorption areas and the charge recombination happening at the quantum dot/electrolyte and Ti O 2 /electrolyte interfaces. Thus, to raise the power conversion efficiency of QDSSC, new counter electrodes, working electrodes, sensitizers, and electrolytes are required. CdSe thin films have shown great potential for use in photodetectors, solar cells, biosensors, light-emitting diodes, and biomedical imaging systems. This article reviews the CdSe nanomaterials that have been recently used in QDSSCs as sensitizers. Their size, design, morphology, and density all noticeably influence the electron injection efficiency and light-harvesting capacity of these devices. A detailed overview of the development of QDSSCs is presented, including their basic principles, the synthesis methods for their CdSe quantum dots, and the device fabrication processes. Finally, the challenges and opportunities of realizing high-performance CdSe QDSSCs are discussed and some future directions are suggested.
RESUMO
In this study, a magnetic/polyetherimide-acrylonitrile composite nanofiber membrane with effective adsorption of nickel ions in an aqueous solution was created using a simple electrospinning method. Iron oxide nanoparticles (NPs) were stirred and ultrasonically dispersed into a polyetherimide-acrylonitrile solution to create a homogenous NPs suspension, which was placed in an electrospinning machine to produce a uniform and smooth nanofiber composite membrane. Nanoparticle incorporation into this membrane was confirmed using scanning electron microscope, energy dispersive X-ray spectroscopy (EDX), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and NPs aqueous stability from a leaching test. The high adsorption capability of the membrane on nickel ions was attributed to the combination of magnetic NPs, polyetherimide-acrylonitrile matrix, and the nanostructure of the membrane. A membrane containing magnetic NPs demonstrated the maximum adsorption capabilities (102 mg/g) of nickel ions in an aqueous solution. Various kinetic and isotherm models were applied to understand the adsorption behavior, such as pseudo-second-order kinetic and Langmuir isotherm models. A polyetherimide-acrylonitrile composite nanofiber membrane containing magnetic NPs could be used as an environmentally friendly and nontoxic adsorbent for the removal of nickel ions in an aqueous medium due to its ease of preparation and use and stability in aqueous mediums.
RESUMO
Migrant workers play a significant role in the economy of Bangladesh, pumping approximately USD15 billion into the economy that directly contributes to the socio-economic development of Bangladesh every year. These workers and their dependents are in a socially vulnerable and economically difficult situation due to the dire impacts of the COVID-19. Migrant workers from Bangladesh in other countries are facing adverse impacts such as unemployment, short working hours, isolation, poor quality of living, social discrimination and mental pressure while their dependents at home are facing financial crisis due to the limited or reduced cash flow from their working relatives. A significant number of migrant workers have been sent back to Bangladesh and many are in constant fear of being sent back due to the impacts of COVID-19 in their host countries. Thus, COVID-19 intensifies numerous socio-economic crises such as joblessness, consumption of reserve funds by family members, and shrinking of the country's remittance inflow. In this situation, the most urgent and important need is to give financial security and social safety to the workers abroad and those who have returned to Bangladesh. Apart from diplomatic endeavors to maintain the status quo of policy, the government of Bangladesh may take initiatives to provide financial support to these workers as a short-term strategy to overcome hardships during the pandemic and design a comprehensive plan with a detailed database of all migrant workers to create a need-based and skilled workforce as a long-term solution. These strategies can mitigate the impacts of COVID-19 at present and address migration related problems in future.
RESUMO
Nitrogen deficiency usually occurs along with aluminum toxicity in acidic soil, which is one of the major constraints for wheat production worldwide. In order to compare adaptive processes to N deficiency with different Al-tolerant wheat cultivars, we chose Atlas 66 and Scout 66 to comprehensively analyze the physiological responses to N deficiency, coupled with label-free mass spectrometry-based proteomics analysis. Results showed that both cultivars were comparable in most physiological indexes under N deficient conditions. However, the chlorophyll content in Scout 66 was higher than that of Atlas 66 under N deficiency. Further proteomic analysis identified 5592 and 5496 proteins in the leaves of Atlas 66 and Scout 66, respectively, of which 658 and 734 proteins were shown to significantly change in abundance upon N deficiency, respectively. The majority of the differentially expressed proteins were involved in cellular N compound metabolic process, photosynthesis, etc. Moreover, tetrapyrrole synthesis and sulfate assimilation were particularly enriched in Scout 66. Our findings provide evidence towards a better understanding of genotype-dependent responses under N deficiency which could help us to develop N efficient cultivars to various soil types.
Assuntos
Nitrogênio/metabolismo , Proteínas de Plantas/metabolismo , Proteoma/metabolismo , Proteômica/métodos , Triticum/metabolismo , Adaptação Fisiológica/genética , Clorofila/metabolismo , Regulação da Expressão Gênica de Plantas , Genótipo , Fotossíntese/genética , Folhas de Planta/genética , Folhas de Planta/metabolismo , Proteínas de Plantas/genética , Proteoma/genética , Especificidade da Espécie , Triticum/classificação , Triticum/genéticaRESUMO
Quantum dots (QDs) are semiconducting inorganic nanoparticles, tiny molecules of 2-10 nm sizes to strength the quantum confinements of electrons. The QDs are good enough to emit light onto electrons for exciting and returning to the ground state. Here, CdSe/ZnS core/shell QDs have been prepared and applied for electrochemical sensor development in this approach. Flat glassy carbon electrode (GCE) was coated with CdSe/ZnS QDs as very thin uniform layer to result of the selective and efficient sensor of 3-CP (3-chlorophenol). The significant analytical parameters were calculated from the calibration plot such as sensitivity (3.6392 µA µM-1 cm-2) and detection limit (26.09 ± 1.30 pM) with CdSe/ZnS/GCE sensor probe by electrochemical approach. The calibration curve was fitted with the regression co-efficient r2 = 0.9906 in the range of 0.1 nM â¼ 0.1 mM concentration, which denoted as linear dynamic range (LDR). Besides these, it was performed the reproducibility in short response time and successfully validated the fabricated sensor for 3-CP in the real environmental and extracted samples. It is introduced as a noble route to detect the environmental phenolic contaminants using CdSe/ZnS QDs modified sensor by electrochemical method for the safety of healthcare and environmental fields at broad scales.
RESUMO
Poly(ethylene terephthalate)/graphite (PET/G) micro-composites were fabricated by the melt compounding method using a minilab extruder. The carbon fillers were found to act as nucleating agents for the PET matrix and hence accelerated crystallization and increased the degree of crystallinity. TGA showed that carbon fillers improved the resistance to thermal and thermo-oxidative degradation under both air and nitrogen atmospheres. However, a poor agreement was observed at higher loadings of the filler where the composites displayed reduced reinforcement efficiency. The results demonstrate that the addition of graphite at loading >14.5 wt.% made electrically conductive composites. It was calculated that the electric conductivities of PET/graphite micro-composites were enhanced, above the percolation threshold values by two orders of magnitudes compared to the PET matrix. The minimum value of conductivity required to avoid electrostatic charge application of an insulating polymer was achieved, just above the threshold values. The addition of graphite also improved thermal stability of PET, accelerated its crystallization process and increased the degree of crystallinity. Microscopic results exhibit no indication of aggregations at 2 wt.% graphite, whereas more agglomeration and rolling up could be seen as the graphite content was increased in the PET matrix (in particular, above the percolation threshold value). Furthermore, based on the mechanical experimental characterization of the PET/graphite micro-composites, a large deformation-based mathematical model is proposed for material behavior predictions. The model fits well the experimental data and predicts other mechanical data that are not included in the parameter identification.
RESUMO
PURPOSE: Cancer treatment is limited by inaccurate predictors of patient-specific therapeutic response. Therefore, some patients are exposed to unnecessary side effects and delays in starting effective therapy. A clinical tool that predicts treatment sensitivity for individual patients is needed. EXPERIMENTAL DESIGN: Patient-derived cancer organoids were derived across multiple histologies. The histologic characteristics, mutation profile, clonal structure, and response to chemotherapy and radiation were assessed using bright-field and optical metabolic imaging on spheroid and single-cell levels, respectively. RESULTS: We demonstrate that patient-derived cancer organoids represent the cancers from which they were derived, including key histologic and molecular features. These cultures were generated from numerous cancers, various biopsy sample types, and in different clinical settings. Next-generation sequencing reveals the presence of subclonal populations within the organoid cultures. These cultures allow for the detection of clonal heterogeneity with a greater sensitivity than bulk tumor sequencing. Optical metabolic imaging of these organoids provides cell-level quantification of treatment response and tumor heterogeneity allowing for resolution of therapeutic differences between patient samples. Using this technology, we prospectively predict treatment response for a patient with metastatic colorectal cancer. CONCLUSIONS: These studies add to the literature demonstrating feasibility to grow clinical patient-derived organotypic cultures for treatment effectiveness testing. Together, these culture methods and response assessment techniques hold great promise to predict treatment sensitivity for patients with cancer undergoing chemotherapy and/or radiation.
Assuntos
Ensaios de Seleção de Medicamentos Antitumorais/métodos , Neoplasias/tratamento farmacológico , Neoplasias/radioterapia , Organoides/efeitos dos fármacos , Organoides/efeitos da radiação , Humanos , Microscopia de Fluorescência por Excitação Multifotônica/instrumentação , Neoplasias/metabolismo , Neoplasias/patologia , Organoides/metabolismo , Organoides/patologia , Medicina de Precisão/métodos , Esferoides Celulares/efeitos dos fármacos , Esferoides Celulares/metabolismo , Esferoides Celulares/efeitos da radiaçãoRESUMO
The nanofibers membranes were fabricated by poly(vinyl alcohol)/chitosan (PVA/Chi) using an electro-spun technique for selective and high adsorption of lead (Pb(II)) and cadmium (Cd(II)) ions based on the solution acidity. The PVA/Chi NFs membranes were characterized systematically using several instrumentations. In addition, several experimental parameters such as initial metal ions concentration, interaction time, adsorbent dosage, solution pH and the effects of competing ions on Pb(II) and Cd(II) adsorption were evaluated. The adsorption data were also clarified that the PVA/Chi NFs membranes were exhibited high kinetic performances towards the both toxic ions at the optimum conditions. The adsorption data were manipulated using different kinetics models, and it was confirmed that only pseudo-second-order model obeyed the adsorption kinetics for Pb(II) and Cd(II) ions. Similarly, the equilibrium data were well fitted with the Langmuir adsorption isotherms model, and the maximum adsorption capacity was 266.12 and 148.79â¯mg/g for Pb(II) and Cd(II) ions, respectively. The Pb(II) and Cd(II) ions adsorptions were also measured to know the selectivity with simulated environmental solution, and the data were confirmed the high selectivity to Pb(II) and Cd(II) ions at the optimum condition and the nanofibers membrane shown the potentiality for possible use in efficient removal of the selected toxic ions from waste samples. Thus, the PVA/Chi NFs are considered to be effective and promising materials for Pb(II) and Cd(II) ions from wastewaters with high efficiency.