Preparation of cellulose/polyvinyl alcohol biocomposite films using 1-n-butyl-3-methylimidazolium chloride.

This study has been focused on developing cellulose/polyvinyl alcohol (PVA), a biocomposite film, pretreated with 1-n-butyl-3-methylimidazolium chloride ([bmim]Cl). The dissolved polymers were blended and their biocomposite films including cellulose and cellulose/PVA were prepared. The effect of PVA composition with cellulose was evaluated by comparing the physical, mechanical, chemical and thermal characteristics of produced films with neat cellulosic film. The results showed that the ionic liquid had a great capability in dissolving the polymers. Furthermore, in composition of the raw cellulose some chemical bonds were incorporated between the two components. Water uptake, thickness swelling and water vapor permeability of blend films were increased comparing to cellulosic film. Mechanical strength and Young's modulus of the films made of cellulose/PVA were decreased while the strain at break was increased. The optical transparency and thermal properties of the blend films were almost the same as neat cellulosic film. This work demonstrated a promising route for the preparation of biodegradable green composites. In addition, this biocomposite film is composed of sustainable biodegradable resources, which is suitable for release to the environment. The biocomposite films showed good optical transparency, thermal stabilities properties.

WITHDRAWN: Elucidation of structural condensation in lignin of eastern cottonwood.

This article has been withdrawn at the request of the author(s) and/or editor. The Publisher apologizes for any inconvenience this may cause. The full Elsevier Policy on Article Withdrawal can be found at http://www.elsevier.com/locate/withdrawalpolicy.

Effects of dissolution of some lignocellulosic materials with ionic liquids as green solvents on mechanical and physical properties of composite films.

In this study two imidazole-based ionic liquids (ILs), namely 1-butyl-3-methyl-1-imidazolium chloride ([BMIM]Cl) and 1,3-methyl imidazolium dimethyl sulfate ([DiMIM][MeSO4]), were used to dissolve ball-milled poplar wood (PW), chemi-mechanical pulp (CMP), and cotton linter (CEL). A set of comparative experiments was carried out, and physical and mechanical properties of the composite films from three different raw materials were determined by means of optical transparency (OT), scanning electron microscopy (SEM), water absorption (WA), thickness swelling (TS), water vapor permeability (WVP), and tensile strength (σb). The overall evaluation indicates the inability of [DiMIM][MeSO4] in complete dissolution of lignocellulosic materials, and sample treatment with this solvent did not lead to water soluble degradation products. However, dissolution trials using [BMIM]Cl were able to dissolve all used lignocellulosic materials by destroying inter and intramolecular hydrogen bonds between lignocelluloses. The OT, WA, TS, and σb of regenerated CEL films were much higher than those of CMP and PW composites. In addition, CEL film showed the lowest WVP compared to WF and CMP composite films. This work demonstrated a promising route for the preparation of biodegradable green cellulose composite films.