Risk assessment of external apical root resorption associated with orthodontic treatment using computed tomography texture analysis.

OBJECTIVES: This study aimed to quantitatively assess maxillary central incisor roots using pre-orthodontics computed tomography (CT) texture analysis as part of a radiomics quantitative analysis. METHODS: This retrospective case-control study included 16 patients with external apical root resorption (EARR) and 16 age- and sex-matched patients without EARR, after orthodontic treatment who underwent pre-orthodontics CT for jaw deformities. All patients were treated with a fixed orthodontic appliance before and after surgical orthodontic treatment. EARR was defined as root resorption ≥ 2 mm of the left and right maxillary central incisors on CT images more than 2 years after the start of orthodontic treatment. Texture features of the maxillary central incisor with and without EARR after orthodontic treatment were analyzed using the open-access software, MaZda Ver. 3.3. Ten texture features were selected using the Fisher method in MaZda from 279 original parameters, which were calculated for each of the maxillary central incisors with and without EARR. The results were tested using the Student's t test, Welch's t test, or Mann-Whitney U test. RESULTS: Four gray-level run length matrix features and six gray-level co-occurrence matrix features displayed significant differences between both the groups (p < 0.01). CONCLUSIONS: CT texture analysis was able to quantitatively assess maxillary central incisor roots and distinguish between maxillary central incisor roots with and without EARR. CT texture analysis may be a useful method for predicting EARR after orthodontic treatment.

Genetic contribution to palatal morphology variation using three-dimensional analysis in Australian twins.

OBJECTIVE: This study aimed to provide insight into the relative contributions of genetic and environmental factors to palatal morphology variation in a cohort of Australian twins. METHODS: Healthy Australian twins, aged 12-15 years (45 monozygotic, 46 same sex dizygotic, and 32 opposite-sex dizygotic) were included in the study groups. A scanner was used to obtain three-dimensional data of the maxillary arch. Palatal depth was defined by a line to the deepest point measured from the reference plane at the mid-point of the inter-pre-molar or inter-molar line. This line was then divided into 10 equal sections in order to created 10 different depths for each palatal width. Each palatal width was divided into anterior and posterior areas. Univariate genetic analysis, using the OpenMx structural equation modelling package in R, was carried out on the quantitative data using the normal assumptions of a twin model. RESULTS: Heritability estimates for anterior palatal width ranged from 0.75 to 0.80, and from 0.78 to 0.86 for posterior palatal width. Estimates for anterior and posterior palatal depth were 0.72 and 0.86, respectively. CONCLUSIONS: Palatal morphology tends to have a moderate to relatively high genetic contribution overall. Palate height has a higher genetic contribution posteriorly than anteriorly. The width of the deep palate is under marginally less stringent genetic regulation than the width of the shallow palate.

Relation of dietary preference to masticatory movement and masticatory exercises in Japanese children.

OBJECTIVE: Modern Japanese children have decreased masticatory function, which can be explained by the dietary change to soft foods. In earlier studies involving children with mixed dentition, masticatory exercises were shown to improve masticatory function and modify dental arch growth. Grinding type of mastication with a wide path reportedly increases lateral growth of the dental arch. This study aimed to assess the relationship between masticatory movements and dietary preference, and how masticatory exercises affected masticatory movement during Hellman's dental stages IIA to IIC (period of first molar eruption). DESIGN: In 64 Japanese pre-school children, we measured masticatory movements with foods of five different levels of hardness and investigated the dietary preference for hard foods through a questionnaire. Participants were also required to perform masticatory exercises. Masticatory movements and dietary preference for hard foods were assessed at the start (T1), conclusion (T2), and after six months of exercises (T3). Participants were allocated to Wide and Narrow groups at T1 based on their masticatory path width. RESULTS: Baguettes and bananas resulted in the widest and narrowest masticatory paths, respectively, at T1. Results of questionnaire indicated that those eating hard foods had a broad grinding type of masticatory path. Masticatory exercises significantly widened the masticatory path in the Narrow group demonstrating that masticatory exercises help children learn to chew with grinding strokes. Moreover, the masticatory path remained stable on assessment at T3 (six-month follow-up). CONCLUSIONS: Masticatory exercises are effective in children who are unable to grind hard foods, affecting their dietary preferences.

Morphological variation in the anterior cranial fossa.

The anterior cranial fossa is an important anatomical landmark in clinical orthodontics consisting of the frontal, ethmoid, and sphenoid bones. The relationships between these bones remain poorly understood. The purposes of the present study were to describe the morphological relationships among the three bones and to discuss the factors contributing to individual variations in adult skulls based on postnatal development. Skulls of 100 Indian adults and 18 Japanese juveniles were observed both macroscopically and using computed tomography images in the median sagittal plane. Three types of relationship were seen among the three bones in adult skulls: (a) a triangular border between ethmoid and sphenoid bones (ethmoid spine), (b) a straight or concave border between ethmoid and sphenoid bones, and (c) frontal bone lying between the ethmoid and sphenoid bones. In the juvenile skull, structures corresponding to those in adults were observed. These three bones comprise the anterior cranial base, each with differing developmental processes, and slight differences in these processes seem to be reflected in the morphological variations seen among adults.

Micro-osteoperforations accelerate orthodontic tooth movement by stimulating periodontal ligament cell cycles.

INTRODUCTION: The aim of this study was to investigate the mechanism of how micro-osteoperforations (MOPs) accelerate tooth movement. We focused on inflammation, cell proliferation, and apoptosis of periodontal ligament cells and performed immunostaining of MOPs exposed to tumor necrosis factor-alpha (TNF-α), proliferating cell nuclear antigen (PCNA), and terminal deoxynucleotidyl transferase dUTP nick end labeling (TUNEL) during experimental tooth movement. METHODS: Eleven-week-old male Wistar rats were divided into 2 groups: (1) 10 g of orthodontic force applied to the maxillary first molar (TM) and (2) force application plus 3 small perforations of the cortical plate (TM + MOPs). On days 1, 4, 7, 10, and 14 after force application, we investigated tooth movement and alveolar bone microstructure using microcomputed tomography (n = 5). We also determined the expression of TNF-α and PCNA in the pressure sides of periodontal ligaments via an immunohistochemical analysis. The expression of apoptotic cells was also determined by the TUNEL method. RESULTS: The tooth movement in the TM + MOPs group was significantly greater on days 4 to 14 than in the TM group. The TM + MOPs group showed statistically significant decreases in bone volume/tissue volume ratio and bone mineral density compared with the TM group. The ratios of TNF-α positive cells in the TM + MOPs group were increased on days 1, 4. 7, and 10 compared with the TM group. The ratios of PCNA positive cells in the TM + MOPs group were increased on days 1, 4, and 7 compared with the TM group, and the ratios of TUNEL positive cells in the TM + MOPs group were increased on days 1 and 7 compared with the TM group. CONCLUSIONS: These results suggest that MOPs may accelerate tooth movement through activation of cell proliferation and apoptosis of periodontal ligament cells.

Effect of caspases and RANKL induced by heavy force in orthodontic root resorption.

OBJECTIVE: Orthodontic root resorption (ORR) due to orthodontic tooth movement is a difficult treatment-related adverse event. Caspases are important effector molecules for apoptosis. At present, little is known about the mechanisms underlying ORR and apoptosis in the cementum. The aim of the present in vivo study was to investigate the expression of tartrate-resistant acid phosphatase (TRAP), caspase 3, caspase 8, and receptor activator of nuclear factor kappa-B ligand (RANKL) in the cementum in response to a heavy or an optimum orthodontic force. METHODS: The maxillary molars of male Wistar rats were subjected to an orthodontic force of 10 g or 50 g using a closed coil spring. The rats were sacrificed each experimental period on days 1, 3, 5, and 7 after orthodontic force application. And the rats were subjected to histopathological and immunohistochemical analyses. RESULTS: On day 7 for the 50-g group, hematoxylin and eosin staining revealed numerous root resorption lacunae with odontoclasts on the root, while immunohistochemistry showed increased TRAP- and RANKL-positive cells. Caspase 3- and caspase 8-positive cells were increased on the cementum surfaces in the 50-g group on days 3 and 5. Moreover, the number of caspase 3- and caspase 8-positive cells and RANKL-positive cells was significantly higher in the 50-g group than in the 10-g group. CONCLUSIONS: In our rat model, ORR occurred after apoptosis was induced in the cementum by a heavy orthodontic force. These findings suggest that apoptosis of cementoblasts is involved in ORR.

Relationship between root resorption and individual variation in the calcium/phosphorous ratio of cementum.

INTRODUCTION: The purpose of this study was to investigate whether individual variation in the hardness and chemical composition of the cementum in the root apex affects the degree of root resorption. METHODS: In a previous study, we evaluated the Vickers hardness scale of 50 extracted teeth. For this study, we classified the 50 extracted teeth into soft, moderate, and hard groups according to the Vickers hardness scale. Then, we randomly selected 7 teeth from each group and measured the resorbed areas of the apical cementum in vitro using human osteoclast precursor cells. We also investigated the calcium/phosphorous (Ca/P) and magnesium/calcium ratios of these 21 extracted teeth using energy-dispersive x-ray microanalysis studies to determine the chemical composition of the cementum in the root apex. RESULTS: In the pit formation assay, the resorbed area in the soft group showed a greater extent than it did in the moderate and hard groups (P < 0.01). A correlation was noted between the Vickers hardness and the resorbed area of the cementum in the root apex (r = -0.714; P < 0.01). The Ca/P ratios in the soft and moderate groups were lower than the ratio in the hard group (P < 0.01 and P < 0.05, respectively). A correlation was noted between the Vickers hardness and the Ca/P ratio of the cementum in the root apex (r = 0.741; P < 0.01). CONCLUSIONS: These results suggest that the hardness and Ca/P ratio of the cementum may be involved in root resorption caused by orthodontic forces.

Relationship between molar occlusion and masticatory movement in lateral deviation of the mandible.

INTRODUCTION: The relationship between molar occlusion and chewing patterns was examined in subjects with laterally deviated mandibles. METHODS: Twenty-three patients with mandibular deviation from the midline (4 mm or more) and skeletal Class I (0° ≤ANB ≤4°) were divided into 2 groups: normal bite and crossbite. The chewing pattern was classified as normal, reversed, or crossover. RESULTS: The normal bite group had a normal chewing pattern on the affected side 100% of the time and a reversed chewing pattern on the affected and unaffected sides 0% and 7.2% of the time, respectively. Additionally, the normal bite group showed no evidence of a crossover chewing pattern and also had significantly less axial inclination of the mandibular teeth on the affected side compared with the crossbite group; lingual inclination was also evident. The crossbite group had a normal chewing pattern on the affected and unaffected sides 0% and 55.6% of the time, respectively, and reversed and crossover chewing patterns on the affected side 55.6% and 44.4% of the time, respectively. CONCLUSIONS: A normal chewing pattern tends to result in lingual axial inclination of the mandibular molars on the affected side, as well as a more consistent chewing pattern.

Comparisons of orthodontic root resorption under heavy and jiggling reciprocating forces during experimental tooth movement in a rat model.

OBJECTIVE: Root mobility due to reciprocating movement of the tooth (jiggling) may exacerbate orthodontic root resorption (ORR). "Jiggling" describes mesiodistal or buccolingual movement of the roots of the teeth during orthodontic treatment. In the present study, buccolingual movement is described as "jiggling." We aimed to investigate the relationship between ORR and jiggling and to test for positive cell expression in odontoclasts in resorbed roots during experimental tooth movement (jiggling) in vivo. METHODS: Male Wistar rats were divided into control, heavy force (HF), optimal force (OF), and jiggling force (JF) groups. The expression levels of cathepsin K, matrix metalloproteinase (MMP)-9 protein, interleukin (IL)-6, cytokine-induced neutrophil chemoattractant 1 (CINC-1; an IL-8-related protein in rodents), receptor activator of nuclear factor κB ligand (RANKL), and osteoprotegerin protein in the dental root were determined using immunohistochemistry. RESULTS: On day 21, a greater number of root resorption lacunae, which contained multinucleated odontoclasts, were observed in the palatal roots of rats in the JF group than in rats from other groups. Furthermore, there was a significant increase in the numbers of cathepsin K-positive and MMP-9-positive odontoclasts in the JF group on day 21. Immunoreactivities for IL-6, CINC-1, and RANKL were stronger in resorbed roots exposed to jiggling than in the other groups on day 21. Negative reactivity was observed in the controls. CONCLUSIONS: These results suggest that jiggling may induce ORR via inflammatory cytokine production during orthodontic tooth movement, and that jiggling may be a risk factor for ORR.

Surface topography, hardness, and frictional properties of GFRP for esthetic orthodontic wires.

In our previous study, glass-fiber-reinforced plastics (GFRPs) made from polycarbonate and glass fiber for esthetic orthodontic wires were prepared by using pultrusion. The purpose of the present study was to investigate the surface topography, hardness, and frictional properties of GFRPs. To investigate how fiber diameter affects surface properties, GFRP round wires with a diameter of 0.45 mm (0.018 in.) were prepared incorporating either 13 µm (GFRP-13) or 7 µm (GFRP-7) glass fibers. As controls, stainless steel (SS), cobalt-chromium-nickel alloy, ß-titanium (ß-Ti) alloy, and nickel-titanium (Ni-Ti) alloy were also evaluated. Under scanning electron microscopy and scanning probe microscopy, the ß-Ti samples exhibited greater surface roughness than the other metallic wires and the GFRP wires. The dynamic hardness and elastic modulus of GFRP wires obtained by the dynamic micro-indentation method were much lower than those of metallic wires (p < 0.05). Frictional forces against the polymeric composite brackets of GFRP-13 and GFRP-7 were 3.45 ± 0.49 and 3.60 ± 0.38 N, respectively; frictional forces against the ceramic brackets of GFRP-13 and GFRP-7 were 3.39 ± 0.58 and 3.87 ± 0.48 N, respectively. For both bracket types, frictional forces of GFRP wires and Ni-Ti wire were nearly half as low as those of SS, Co-Cr, and ß-Ti wires. In conclusion, there was no significant difference in surface properties between GFRP-13 and GFRP-7; presumably because both share the same polycarbonate matrix. We expect that GFRP wires will deliver superior sliding mechanics with low frictional resistance between the wire and bracket during orthodontic treatment.

Interleukin-17 is involved in orthodontically induced inflammatory root resorption in dental pulp cells.

INTRODUCTION: The objectives of this study were (1) to investigate the expressions of interleukin (IL)-17, RANKL (the receptor activator of NF-kappaB ligand), and osteoprotegerin (OPG) in root resorption areas during experimental tooth movement in rats, and (2) to determine the effect of IL-17 on the expressions of RANKL and OPG mRNA from human dental pulp cells. METHODS: Twelve male 6-week-old Wistar rats were subjected to an orthodontic force of 50 g to induce a mesially tipping movement of the maxillary first molars for 7 days. The expression levels of tartrate resistant acid phosphatase (TRAP), interleukin (IL)-17, IL-17 receptor (IL-17R), receptor activator of nuclear factor-kappa B ligand (RANKL), and OPG proteins were determined in dental pulp by immunohistochemical analysis. Furthermore, the effects of IL-17 on the expressions of RANKL and OPG mRNA were investigated using human dental pulp cells in vitro. RESULTS: In the experimental tooth movements in vivo, resorption lacunae with multinucleated cells were observed in the 50-g group. The immunoreactivities for IL-17, IL-17R, and RANKL were detected in dental pulp tissues subjected to the orthodontic force on day 7. Moreover, IL-17 increased the mRNA expression of RANKL from human dental pulp cells in vitro. CONCLUSIONS: The results of this study suggest that IL-17 and RANKL may be involved in the process of orthodontically induced inflammatory root resorption in dental pulp cells.

Color stability of laboratory glass-fiber-reinforced plastics for esthetic orthodontic wires.

OBJECTIVE: In our previous study, glass-fiber-reinforced plastics (GFRPs) made from polycarbonate and glass fibers were prepared for esthetic orthodontic wires using pultrusion. These laboratory GFRP wires are more transparent than the commercially available nickel-titanium wire; however, an investigation of the color stability of GFRP during orthodontic treatment is needed. Accordingly, in the present study, the color stability of GFRP was assessed using colorimetry. METHODS: Preparation of GFRP esthetic round wires (diameter: 0.45 mm [0.018 inch]) using pultrusion was described previously. Here, to investigate how the diameter of fiber reinforcement affects color stability, GFRPs were prepared by incorporating either 13-µm (GFRP-13) or 7-µm glass (GFRP-7) fibers. The color changes of GFRPs after 24 h, and following 1, 2, and 4 weeks of coffee immersion at 37℃, were measured by colorimetry. We evaluated the color stability of GFRPs by two evaluating units: the color difference (ΔE(*)) and National Bureau of Standards (NBS). RESULTS: After immersion, both GFRPs showed almost no visible color change. According to the colorimetry measurements, the ΔE(*) values of GFRP-13 and GFRP-7 were 0.73-1.16, and 0.62-1.10, respectively. In accordance with NBS units, both GFRPs showed "slight" color changes. As a result, there were no significant differences in the ΔE(*) values or NBS units for GFRP-13 or GFRP-7. Moreover, for both GFRPs, no significant differences were observed in any of the immersion periods. CONCLUSIONS: Our findings suggest that the GFRPs will maintain high color stability during orthodontic treatment, and are an attractive prospect as esthetic orthodontic wires.

Preparation, mechanical, and in vitro properties of glass fiber-reinforced polycarbonate composites for orthodontic application.

Generally, orthodontic treatment uses metallic wires made from stainless steel, cobalt-chromium-nickel alloy, ß-titanium alloy, and nickel-titanium (Ni-Ti) alloy. However, these wires are not esthetically pleasing and may induce allergic or toxic reactions. To correct these issues, in the present study we developed glass-fiber-reinforced plastic (GFRP) orthodontic wires made from polycarbonate and E-glass fiber by using pultrusion. After fabricating these GFRP round wires with a diameter of 0.45 mm (0.018 inch), we examined their mechanical and in vitro properties. To investigate how the glass-fiber diameter affected their physical properties, we prepared GFRP wires of varying diameters (7 and 13 µm). Both the GFRP with 13-µm fibers (GFRP-13) and GFRP with 7 µm fibers (GFRP-7) were more transparent than the metallic orthodontic wires. Flexural strengths of GFRP-13 and GFRP-7 were 690.3 ± 99.2 and 938.1 ± 95.0 MPa, respectively; flexural moduli of GFRP-13 and GFRP-7 were 25.4 ± 4.9 and 34.7 ± 7.7 GPa, respectively. These flexural properties of the GFRP wires were nearly equivalent to those of available Ni-Ti wires. GFRP-7 had better flexural properties than GFRP-13, indicating that the flexural properties of GFRP increase with decreasing fiber diameter. Using thermocycling, we found no significant change in the flexural properties of the GFRPs after 600 or 1,200 cycles. Using a cytotoxicity detection kit, we found that the glass fiber and polycarbonate components comprising the GFRP were not cytotoxic within the limitations of this study. We expect this metal-free GFRP wire composed of polycarbonate and glass fiber to be useful as an esthetically pleasing alternative to current metallic orthodontic wire.

Interleukin-17/T-helper 17 cells in an atopic dermatitis mouse model aggravate orthodontic root resorption in dental pulp.

Interleukin (IL)-17 is an important mediator of orthodontically induced inflammatory root resorption (OIIRR). However, its role in the dental pulp (DP) has not been studied. The aim of this study was to investigate, using an atopic dermatitis (AD) model, how IL-17 contributes to OIIRR in DP. Atopic dermatitis is the most common IL-17-associated allergic disease. Atopic dermatitis model mice (AD group) and wild-type mice (control group) were subjected to an excessive orthodontic force. The localization of T-helper (Th)17 cells, IL-17, IL-6, and keratinocyte chemoattractant (KC; an IL-8-related protein in rodents) were determined in DP. In addition, CD4+ T cells, including IL-17 production cells, were obtained from patients with AD and from healthy donors, and the effects of IL-17 on the production of IL-6 and IL-8 were investigated using a co-culture of CD4+ T cells with human dental pulp (hDP) cells stimulated with substance P (SP). Immunoreactivity for Th17 cells, IL-17, IL-6, and KC was increased in DP tissue subjected to orthodontic force in the AD group compared with DP tissue subjected to orthodontic force in the control group. The cells obtained from the AD patients displayed increased IL-6 and IL-8 production. These results suggest that IL-17 may aggravate OIIRR in DP.

Role of interleukin-6 in orthodontically induced inflammatory root resorption in humans.

OBJECTIVE: To determine the interleukin (IL)-6 levels in gingival crevicular fluid (GCF) of patients with severe root resorption after orthodontic treatment and investigate the effects of different static compressive forces (CFs) on IL-6 production by human periodontal ligament (hPDL) cells and the influence of IL-6 on osteoclastic activation from human osteoclastic precursor (hOCP) cells in vitro. METHODS: IL-6 levels in GCF samples collected from 20 patients (15 and 5 subjects without and with radiographic evidence of severe root resorption, respectively) who had undergone orthodontic treatment were measured by ELISA. The levels of IL-6 mRNA in hPDL cells and IL-6 protein in conditioned medium after the application of different uniform CFs (0, 1.0, 2.0, or 4.0 g/cm(2) for up to 72 h) were measured by real-time PCR and ELISA, respectively. Finally, the influence of IL-6 on mature osteoclasts was investigated by using hOCP cells on dentin slices in a pit-formation assay. RESULTS: Clinically, the IL-6 levels were significantly higher in the resorption group than in the control group. In vitro, IL-6 mRNA expression significantly increased with increasing CF. IL-6 protein secretion also increased in a time- and magnitude-dependent manner. Resorbed areas on dentin slices were significantly greater in the recombinant human IL-6-treated group and group cultured in hPDL cell-conditioned medium with CF application (4.0 g/cm(2)) than in the group cultured in hPDL cell-conditioned medium without CF application. CONCLUSIONS: IL-6 may play an important role in inducing or facilitating orthodontically induced inflammatory root resorption.

Mini-implants in the anchorage armamentarium: new paradigms in the orthodontics.

Paradigms have started to shift in the orthodontic world since the introduction of mini-implants in the anchorage armamentarium. Various forms of skeletal anchorage, including miniscrews and miniplates, have been reported in the literature. Recently, great emphasis has been placed on the miniscrew type of temporary anchorage device (TAD). These devices are small, are implanted with a relatively simple surgical procedure, and increase the potential for better orthodontic results. Therefore, miniscrews not only free orthodontists from anchorage-demanding cases, but they also enable clinicians to have good control over tooth movement in 3 dimensions. The miniplate type also produces significant improvements in treatment outcomes and has widened the spectrum of orthodontics. The purpose of this paper is to update clinicians on the current concepts and versatile uses and clinical applications of skeletal anchorage in orthodontics.

Effects of relaxin on relapse and periodontal tissue remodeling after experimental tooth movement in rats.

The relapse of teeth that have moved during orthodontic treatment is a major clinical issue with respect to the goals of successful treatment. Relaxin has an influence on many physiologic processes, such as collagen turnover. In this study, we determined the effects of relaxin on the relapse and remodeling of periodontal tissue after experimental tooth movement in rats, and we explored the molecular mechanism underlying these processes. To induce experimental tooth movement in rats, 10 g of orthodontic force was applied to the molars. After 14 days, the spring was removed, and then animals began receiving relaxin at a dose of 500 ng/ml for 1 week. The results were evaluated by micro-computed tomography and immunofluorescence staining. In addition, the effects of matrix metalloproteinase (MMP)-1 and MMP-8 production were investigated in human periodontal ligament (hPDL) cells in vitro. The expression of MMP-1 and MMP-8 was analyzed by real-time polymerase chain reaction and enzyme-linked immunosorbent assay. Furthermore, we demonstrated the signaling pathways involved in relaxin-regulated MMPs expression. The relapse distances and percentages were significantly decreased in the experimental group compared with the controls in vivo. A double-immunofluorescence analysis for Col-I/MMP-1 and Col-I/MMP-8 detected the expression of relaxin in the PDL. Relaxin significantly increased the MMP-1 and MMP-8 expression in a time-dependent manner in hPDL cells in vitro. Furthermore, a p38 inhibitor (SB203580) significantly inhibited the MMP-1 and MMP-8 expression. Our results indicated that relaxin modulates the collagen metabolism, and this hormone may therefore be useful to prevent orthodontic relapse following orthodontic treatment.

Effects of HSP70 on the compression force-induced TNF-α and RANKL expression in human periodontal ligament cells.

OBJECTIVE AND DESIGN: The aim of this study was to investigate the effect of heat shock protein 70 (HSP70) on the mRNA expression of tumor necrosis factor-alpha (TNF-α) and receptor activator of nuclear factor-kappa B ligand (RANKL) induced by compressive forces (CF) in human periodontal ligament (hPDL) cells. MATERIAL AND TREATMENT: hPDL cells were subjected to 1.0, 2.0, or 4.0 g/cm(2) of CF for 24 h, and were treated with recombinant human inducible HSP70 for 12 h. METHODS: The mRNA expression of HSP27, HSP70, HSP90, TNF-α, RANKL and OPG from hPDL cells subjected to CF was determined by real-time PCR. The protein production of HSP70 was determined by Western blot analysis and ELISA. RESULTS: The mRNA expression of HSP70, TNF-α and RANKL were found to be increased in a time- and magnitude-dependent manner, detectable at 12, 9, and 9 h, respectively. TNF-α and RANKL expression gradually decreased at 12 h with increasing HSP70 levels, and further decreased thereafter. Furthermore, exogenous HSP70 partially inhibited the CF-induced TNF-α and RANKL expression in a dose-dependent manner at 6 and 12 h. CONCLUSIONS: These results indicate that HSP70 may modulate the mRNA expression of TNF-α and RANKL in hPDL cells in response to CF.

Expressions of RANKL/RANK and M-CSF/c-fms in root resorption lacunae in rat molar by heavy orthodontic force.

The differentiation and functions of osteoclasts are regulated by receptor activator of nuclear factor-κB (RANK)/receptor activator of nuclear factor-κB ligand (RANKL) system that stimulates osteoclasts formation. Macrophage colony-stimulating factor (M-CSF) is also essential for osteoclastogenesis. A recent immunocytochemical study reported that RANKL/RANK and M-CSF/c-fms were localized in the periodontal ligament of rat molars during experimental orthodontic tooth movement. The present study focused on the expressions of RANKL/RANK and M-CSF/c-fms in root resorption area during experimental tooth movement in rats. Forty 6-week-old male Wistar rats were subjected to an orthodontic force of 10 or 50 g with a closed coil spring (wire size: 0.005 inch, diameter: 1/12 inch) ligated to the maxillary first molar cleat by a 0.008 inch stainless steel ligature wire to induce a mesial tipping movement of the upper first molars. Experimental tooth movement was undertaken for 10 days. Each sample was sliced into 6 µm continuous sections in a horizontal direction and prepared for haematoxylin and eosin (H and E) and immunohistochemistry staining for tartrate-resistant acid phosphatase (TRAP), RANK, RANKL M-CSF, and c-fms in root resorption area. Statistical analysis was carried out using a Mann-Whitney U-test with a significance level of P<0.01. On days 7 and 10, immunoreactivity for RANKL/RANK and M-CSF/c-fms was detected in odontoclasts with an orthodontic force of 50 g, but not 10 g. Therefore, RANKL/RANK and M-CSF/c-fms systems may be involved in the process of root resorption by heavy orthodontic force.

Low-energy laser irradiation facilitates the velocity of tooth movement and the expressions of matrix metalloproteinase-9, cathepsin K, and alpha(v) beta(3) integrin in rats.

It has previously been reported that low-energy laser irradiation stimulated the velocity of tooth movement via the receptor activator of nuclear factor kappa B (RANK)/RANK ligand and the macrophage colony-stimulating factor/its receptor (c-Fms) systems. Matrix metalloproteinase (MMP)-9, cathepsin K, and alpha(v) beta(3) [alpha(v)beta3] integrin are essential for osteoclastogenesis; therefore, the present study was designed to examine the effects of low-energy laser irradiation on the expression of MMP-9, cathepsin K, and alpha(v)beta3 integrin during experimental tooth movement. Fifty male, 6-week-old Wistar strain rats were used in the experiment. A total force of 10g was applied to the rat molars to induce tooth movement. A Ga-Al-As diode laser was used to irradiate the area around the moving tooth and, after 7 days, the amount of tooth movement was measured. To determine the amount of tooth movement, plaster models of the maxillae were made using a silicone impression material before (day 0) and after tooth movement (days 1, 2, 3, 4, and 7). The models were scanned using a contact-type three-dimensional (3-D) measurement apparatus. Immunohistochemical staining for MMP-9, cathepsin K, and integrin subunits of alpha(v)beta3 was performed. Intergroup comparisons of the average values were conducted with a Mann-Whitney U-test for tooth movement and the number of tartrate-resistant acid phosphatase (TRAP), MMP-9, cathepsin K, and integrin subunits of alpha(v)beta3-positive cells. In the laser-irradiated group, the amount of tooth movement was significantly greater than that in the non-irradiated group at the end of the experiment (P < 0.05). Cells positively stained with TRAP, MMP-9, cathepsin K, and integrin subunits of alpha(v)beta3 were found to be significantly increased in the irradiated group on days 2-7 compared with those in the non-irradiated group (P < 0.05). These findings suggest that low-energy laser irradiation facilitates the velocity of tooth movement and MMP-9, cathepsin K, and integrin subunits of alpha(v)beta3 expression in rats.