Is Orthognathic Correction with TMJ Preservation A Stable Treatment Option for Patients with Juvenile Idiopathic Arthritis?

Purpose: The purpose of this study was to evaluate the long-term skeletal stability of orthognathic correction of dentofacial deformities secondary to juvenile idiopathic arthritis (JIA) in individuals without total alloplastic joint reconstruction. Materials and Methods: The investigators designed and implemented a retrospective case series of patients diagnosed with JIA who underwent bimaxillary orthognathic surgery. To evaluate the long-term skeletal changes, the maxillary palatal plane to mandibular plane angle, anterior facial height, and posterior facial height measurements were evaluated through cephalograms. Results: Six patients met inclusion criteria. All subjects were female (mean 16.2 years). Four patients demonstrated < 1° of change of the palatal plane to mandibular plane angle, and all patients had < 2° of change. Three patients had < 1% change in the anterior to posterior facial height ratio. Three patients demonstrated relative posterior facial shortening compared to anterior facial height (< 4%). No patients developed postoperative anterior open-bite malocclusion. Conclusion: Orthognathic correction of the JIA DFD deformity with TMJ preservation is a viable modality to improve facial esthetics, occlusion, upper airway and speech swallowing and chewing mechanisms in select patients. The measured skeletal relapse did not affect the clinical outcome.

Comparison of dental arch forms created from assessment of teeth, alveolar bone, and the overlying soft tissue.

OBJECTIVE: The objective of this study was to determine whether there are differences among the arch forms created from assessments of tooth surfaces, alveolar bone, and overlying soft tissue. MATERIALS AND METHODS: This study included 18 individuals who presented with a class I malocclusion, mild crowding, and a cone beam computed tomography (CBCT) image of good diagnostic quality. The facial axis point was chosen to create the arch form from teeth, the Bowman-Kau (BK) point was used to establish the arch form from alveolar bone, and the WALA ridge was used to calculate the soft tissue arch form. A predetermined algorithm was then used to create five separate arch forms per patient. These arch forms were categorized according to shape and were superimposed. The distances between the tooth-, bone-, and soft tissue-derived arch forms were calculated. RESULTS: The calculated distances between all arch forms were significantly different. The distances between the tooth- and bone-derived arch forms were larger for the mandible compared to the maxilla (mean 3.30 vs. 2.48 mm, respectively). The larger distances seemed to be located more posteriorly in the arch than anteriorly. The distance between tooth- and soft tissue-derived arch forms was largest for the second premolar (2.35 ± 1.59 mm), first molar (2.86 ± 0.63 mm), and second molar (3.25 ± 0.87 mm). There were no significant differences in the distance between the tooth- and either bone- or soft tissue-derived arch forms with regard to sex. CONCLUSIONS: The arch form shapes obtained from the teeth, alveolar bone, and soft tissue are correlated and show the same general shape. Although future large-scale studies are needed for confirmation, our results suggest that evaluating the easily visualized external features, including the WALA ridge, can adequately predict the underlying bone shape, and thus the desired arch form. Nevertheless, the shapes vary significantly between patients, so the final treatment plan should be individualized rather than relying on over-simplified general wire shapes.

Quantifying changes in incisor inclination before and after orthodontic treatment in class I, II, and III malocclusions.

BACKGROUND: This study was designed to determine if orthodontic treatment significantly changes the upper incisor position in Class I, II, and III dental and skeletal malocclusions. METHODS: Ninety nonextraction-treated patients were included in this retrospective cohort study and divided into three groups: Class I, Class II, and Class III. All cephalometric measurements (ANB, Wits, U1-PP, U1-SN, U1-NA, U1 perpendicular to FH and U1-L1) were taken using the Dolphin Management and Imaging Software, Version 05.05.5070.221436 (United States and Canada). RESULTS: The posttreatment values of ANB, Wits appraisal, U1-NA mm, U1-FH mm, IMPA and U1-L1° are statistically significant (P < 0.05) among the Class I, II, and III when compared with the normal values. Also ANB° changes after orthodontic treatment in Class I, II, and III were statistically significant with the greater changes in Class III malocclusion. CONCLUSIONS: There is a significant amount of dento-alveolar compensation for the maxillary incisors not only in patients with Class II and III but also in Class I malocclusions that underwent nonextraction treatments.

A combined orthodontic / orthognathic approach in the management of obstructive sleep apnoea: Balancing treatment efficacy and facial aesthetics.

Obstructive sleep apnoea (OSA) is a prevalent condition and has been extensively managed with orthognathic surgery using a variety of surgical techniques. This case report describes the successful management of a 56-year-old Caucasian woman with a bimaxillary retrusive profile and macroglossia complicated by OSA and the combined use of orthodontics and orthognathic surgery to improve Apnoea-Hypopnoea Index while maintaining facial aesthetics. The non-extraction treatment plan included: (1) pre-surgical orthodontic treatment to maximise aesthetics and functional occlusion after surgery; (2) maxillomandibular advancement using down fracture of the maxilla (Le Fort 1 osteotomy) with counter-clockwise rotation as well as bilateral sagittal split osteotomy with septoplasty to aid increase in airway function; and (3) post-surgical orthodontic finishing and alignment with self-ligating fixed appliances. Optimum aesthetic and functional results as well as an increase in the airway volume were achieved, without compromising facial aesthetics, with the cooperation of two specialties and the use of state-of-the-art technology during the surgical planning stages.

Team approach in the management of revision surgery to correct bilateral temporomandibular joint replacements.

This case report describes the successful second surgical treatment of a 26-year-old white female patient with a retrognathic mandible and previous bilateral total joint prostheses placement. The patient had previously presented with bilateral idiopathic condylar resorption (ICR) which caused clockwise mandibular rotation and resulted in anterior open bite and a retrognathic mandible. The patient had undergone definitive corrective for the ICR where condylectomies were performed bilaterally. In addition, total joint prostheses using 'stock joints' were used to restore the condyle and glenoid fossa on both sides. Although the previous surgery corrected the anterior open bite and restored the condyles, the patient was still suffering from joint symptoms (significant pain), restricted mandibular movements, increased overjet (12 mm) and a retrognathic mandible. The treatment plan included a combined orthodontic surgical approach: (1) bimaxillary orthognathic surgery: a surgical procedure on the mandible to reposition the prosthetic joints and correct the mandible position, and a segmental LeFort I to expand the maxilla; and (2) post-surgical orthodontics treatment to detail the occlusion. At the end of the treatment, good aesthetic and functional results were obtained with the cooperation of two specialties. This case emphasises the importance of three-dimensional planning and multidisciplinary treatment when addressing complex jaw movements. It also emphasises the importance orthodontic planning and collaboration with the orthodontist.

Evaluation of temporomandibular joint function after orthognathic surgery using a jaw tracker.

OBJECTIVE: It has been reported that temporomandibular joint (TMJ) function after orthognathic surgery differs from normal patients. Dysfunction of the joints occurs often even in the general public, with an incidence in the range of 20%-25%. Population-based studies among adults report that approximately 10%-15% have symptoms of pain and 5% of them had a perceived need for treatment. To date, no studies have reported on the evaluation of TMJ function after orthognathic surgery through the use of four-dimensional jaw tracking. DESIGN AND SETTING: This study evaluated TMJ function using such a device and information from a TMJ questionnaire. Sixteen orthognathic surgery patients and 17 controls were included in this study. Four-dimensional jaw tracking information was obtained using the SiCAT JMT device. Clinical signs and jaw function were evaluated. RESULTS: Within the limitations of the study, the following results were seen using the SICAT JMT+ jaw tracking device: (1) no significant differences were found in any of the millimetric measurements between the surgery patients and controls; (2) no significant difference was found in subjective reported symptoms of pain, clicking, crepitation, locking, stiffness, headaches and migraines between the groups; and (3)there was a significant difference in the popping of the joints for surgery and non-surgery groups. CONCLUSION: Jaw tracking did not detect significant differences in jaw function, but some clinical symptoms were present.

A Comparison of 3D Facial Features in a Population from Zimbabwe and United States.

OBJECTIVES: The purpose of this study was to determine the differences in three-dimensional (3D) facial features in a population from Zimbabwe and the United States. In addition, this study seeks to establish an average facial template of each population allowing clinicians to treat patients according to their cultural esthetic perceptions. MATERIALS AND METHODS: Three hundred one subjects from Zimbabwe and the United States were carefully selected and recruited for the study. Each subject presented with a normal facial profile, no asymmetries, and normal body mass index. The 3D images were captured using the 3dMD cameras. All images were further separated into male and female groups of the respective populations and imported to a dedicated software for analysis. STATISTICAL ANALYSIS: The 3D facial images were constructed using Rapidform 6 software to recreate a composite facial average for each group representing a male and female average 3D face of Zimbabwean (Zim) and United States origin. RESULTS: The linear measurements showed that the maximum average distance between the Zim-M and Zim-F was 1.24 mm and the minimum distance between the African American (AA)-M and AA-F was 0.24 mm. This was the absolute distance. When the signed linear measurements were taken into consideration, the maximum average distance between Zim-F and AA-M was 1.22 mm and the least average distance between the Zim-M and AA-M was 0.22 mm. The absolute color histograms showed greatest similarity between the Zim-M and AA-M at 58% and the Zim-F had a 25 and 27% similarity with the AA-F and Zim-M, respectively. CONCLUSION: The Zim-F showed the most variable features with a broader face, prominent forehead, and retruded alar base compared with their male counterparts and the Zim-M showed a wider prominent malar/zygomatic region, and prominent lateral supraorbital regions. There was a high similarity of 58% between the Zim-M and the AA-M, with the Zim-M showing a more protrusive superciliary arches, and a lateral zygomatic region tapering to the root of the nose.

Orthodontic-Orthognathic Management of a patient with skeletal class II with bimaxillary protrusion, complicated by vertical maxillary excess: A multi-faceted case report of difficult treatment management issues.

This case reports the unsuccessful first treatment and the subsequent retreatment of a 35-year old Asian female with a skeletal class II with bimaxillary protrusion, complicated by a deep bite and vertical maxillary excess. This case report highlights the multiple facets of a challenging treatment plan and discusses the ramifications of treatment when treatment does not go as planned. The initial treatment plan consisted of a surgical approach with a maxillary Le Fort I surgery to correct the malocclusion as per the patient's requests without mandibular surgery due to the inherent risk of paraesthesia. The second treatment plan consisted of a bimaxillary surgery with genioplasty. The surgical treatment utilized virtual surgical planning (VSP). The orthodontic treatment was concluded with a corrected overjet and overbite achieving optimum function and balancing the facial profile aesthetically. This case report highlights the need for clear communication of the treatment plan and also the unpredictability of certain treatment outcomes especially when the literature does not provide for definitive conclusions. In addition, it sheds light on the challenge of unpredictable response of soft tissue after surgical treatment and the importance of patient expectations of outcomes. It is hoped that the paper provides a platform for future discussions of difficult malocclusions.

Virtual surgical planning: Balancing esthetics, practicality, and anticipated stability in a complex Class III patient.

The treatment of skeletal Class III malocclusion with anterior open bite is a complex and challenging aspect of orthodontics. Facial esthetic factors, practicality and the anticipated stability of a provisional surgical plan must all be factored into the final decision of the actual orthodontic-orthognathic treatment. This case report presents the multidisciplinary treatment of a 39-year-old female patient with skeletal Class III, severe open bite with first dental contact being on the second molars, lateral crossbite, and crowding in both arches. The nonextraction treatment started with aligning and leveling of the teeth in both arches followed by an initial surgical plan based on the clinical evaluation of the smile esthetics. Precise surgical planning information was imported into the Virtual Surgica (VSP Orthognathics) workflow to visualize the direction and amount of movement necessary. The final plan was adjusted because of anticipated practical limitations of the surgery as well as to insure the stability. LeFort I, bilateral sagittal split osteotomies, and setback genioplasty were thus performed. After the surgery, the treatment concluded with the fine adjustment of the occlusion. In the end, good esthetic and functional outcomes with long-term stability were achieved as a result of this delicate multidisciplinary approach.

A 3D Follow-Up Study of Cranial Asymmetry from Early Infancy to Toddler Age after Preterm versus Term Birth.

Preterm infants are at higher risk for both symmetrical and asymmetrical head molding. This study involved 3D stereophotogrammetry to assess the cranial growth, molding, and incidence of deformational plagiocephaly (DP) in preterm children compared to term born children. Thirty-four preterm infants and 34 term born controls were enrolled in this study from Oulu University Hospital, Finland. Three-dimensional head images were obtained at the age of 2-4 months (T1), 5-7 months (T2), 11-13 months (T3), and 2.5-3 years (T4) from the term equivalent age (TEA). There was no statistically significant difference in oblique cranial length ratio (OCLR), cephalic index (CI), or weighted asymmetry score (wAS) between the two groups. Occipital flattening, defined by flatness score (FS) was statistically significantly greater in the preterm group than in the term group at T1-T4 (p < 0.05). In both groups, OCLR improved gradually over time. There were no instances, in either group, of severe DP and no moderate DP after T2. Results indicate that DP affects preterm and full-term children almost equally during the first three years of life, and cranial asymmetry resolves at a similar rate in both preterm and term groups after three months of corrected age. Preterm infants present with more occipital flattening than full-term children.

Comprehensive treatment approach for bilateral idiopathic condylar resorption and anterior open bite with customized lingual braces and total joint prostheses.

This case report describes the successful treatment of a 14-year-old girl with severe bilateral idiopathic condylar resorption and resultant mandibular retrusion, increased overjet, and anterior open bite. The nonextraction treatment plan included (1) aligning and leveling the teeth in both arches, (2) performing Le Fort I maxillary osteotomy, bilateral condylectomy, and mandibular joint replacement, and (3) postsurgical correction of the malocclusion. The orthodontic treatment was initiated with the use of custom lingual appliances followed by orthognathic surgery planned with virtual surgical planning. Patient-fitted and customized temporomandibular joint implants were designed and manufactured based on the patient's stereolithic bone anatomic model. Treatment was concluded with detailed orthodontic finishing. Optimum esthetic and functional results were achieved with the cooperation of 2 specialties and the use of state-of-the-art technology.

Bone Reconstruction Planning Using Computer Technology for Surgical Management of Severe Maxillomandibular Atrophy.

Digital imaging technology and refined software programs have significantly improved a clinician's ability to assess and evaluate anatomic structures and quantify both defect size and required graft volume. This article summarizes the computed tomography-based technology used in these applications to illustrate their current use as exemplified by computer-assisted planning and treatment of severe maxillofacial atrophy treated using both interpositional and mesh-onlay grafting methodology.

Effect of fluoride dentifrices on white spot lesions during orthodontic treatment: A randomized trial.

OBJECTIVES: To determine the effect of Clinpro 5000, Clinpro Tooth Crème, and MI-Paste Plus on the formation of white spot lesions in patients undergoing orthodontic treatment. MATERIALS AND METHODS: Three prospective groups with 40 patients undergoing orthodontic treatment in each group were evaluated (total recruitment = 120 subjects). The selected product was brushed on for 2 minutes twice daily for 4 months. Subjects were reviewed for 4 months on a monthly basis. The Enamel Decalcification Index (EDI) was used to determine the number of white spot lesions per surface at each visit. RESULTS: 100 subjects (35 using Clinpro 5000, 32 using Clinpro Tooth Crème, and 33 using MI Paste Plus) completed the study. The data lend strong support for Clinpro 5000 providing superior protection against enamel decalcification when compared to Clinpro Crème, and mixed support when compared to MI Paste Plus. CONCLUSIONS: The use of Clinpro 5000, Clinpro Crème, and MI paste Plus all have a reduction effect on white spot lesions when compared to studies reported previously. Clinpro 5000 has a marginally better effect than the two other test pastes. The results of this study can be used by clinicians when deciding the effectiveness of using fluoride dentifrice products to prevent white spot lesions in their orthodontic practice (ClinicalTrials.gov ID: NCT03440996).

A Cross-Sectional Study to Understand 3D Facial Differences in a Population of African Americans and Caucasians.

OBJECTIVE: The purpose of this cross-sectional retrospective study was to use three-dimensional surface imaging to determine gender dimorphism and facial morphological changes from adolescence to adulthood in African American and Caucasian populations. MATERIALS AND METHODS: Three-dimensional images were captured and the total sample size included 371 subjects. Images were combined using Rapidform 2006 Plus Pack 2 software to produce a male and female facial average for each population. Comparisons were conducted within the following categories: (1) gender comparison within each race, (2) adult and adolescent comparison within each race, and (3) adult and adolescent comparison between the races. RESULTS: Adolescent gender comparisons within each race showed high percentages of similarity. However, adult females in both races showed more prominent periorbital, malar, and nasolabial regions and less prominent lower forehead, nose, and lower face compared with adult males of the same race. African American adult females showed increase in length and width of the face, increased nasal tip projection, and decreased periorbital regions compared with African American adolescent females. Welsh adult females had an increase in the nose and chin projection compared with Welsh adolescent females. Adult males of both races had increase in nose and chin projection, increase in length and width of the face, and decreased periorbital, malar, and nasolabial regions compared with adolescent males of the same race. African American adolescents had a wider alar base, more protrusive lips, and periorbital regions, and less prominent nose and chin compared with the Welsh adolescents. African American adults also had a wider alar base; more protrusive lips and periorbital regions; a broader face; and more retrusive chin, nose, nasolabial region; and lower forehead compared with Welsh adults. CONCLUSIONS: Few differences were noted between genders within the same racial groups during adolescence. However, changes became more distinct in adulthood. From adolescence to adulthood, facial morphologies were similarly matched within the gender for females; however, there were significant changes for males. Lastly, facial morphology patterns tend to be established early in life.

Temporomandibular joint arthritis in juvenile idiopathic arthritis, now what?

BACKGROUND: Arthritis involving the temporomandibular joint (TMJ) complicates 40 - 96% of cases of juvenile idiopathic arthritis (JIA), potentially leading to devastating changes to form and function. Optimal evaluation and management of this joint remains a matter of ongoing discussion. METHODS: We performed a PubMed search for all articles with keywords "temporomandibular" and "arthritis", covering the dates 2002 through February 28, 2018. A separate PubMed search was performed for all articles with keywords "temporomandibular joint", "arthritis", and "treatment" covering the same dates. FINDINGS: The TMJ is a particularly challenging joint to assess, both clinically and with imaging studies. Clinical assessment of the TMJ is hampered by the low sensitivity of joint pain as well as the absence of physical exam findings early in the disease process. As with all joints, plain radiography and computed tomography only detect arthritic sequelae. Additionally, there is mixed data on the sensitivity of ultrasound, leaving magnetic resonance imaging (MRI) as the optimal diagnostic modality. However, several recent studies have shown that non-arthritic children can have subtle findings on MRI consistent with TMJ arthritis, such as joint effusion and contrast enhancement. Consequently, there has been an intense effort to identify features that can be used to differentiate mild TMJ arthritis from normal TMJs, such as the ratio of the enhancement within the TMJ itself compared to the enhancement in surrounding musculature. With respect to treatment of TMJ arthritis, there is minimal prospective data on medical therapy of this complicated joint. Retrospective studies have suggested that the response to medical therapy of the TMJ may lag behind that of other joints, prompting use of intraarticular (IA) therapy. Although most studies have shown short-term effectiveness of corticosteroids, the long-term safety of this therapy on local growth as well as on the development of IA heterotopic bone have prompted recommendations to limit use of IA corticosteroids. Severe TMJ disease from JIA can also be managed non-operatively with splints in a growing child, as well as with surgery. CONCLUSION: In this review, we summarize literature on the diagnosis and management of TMJ arthritis in JIA and suggest a diagnostic and therapeutic algorithm for children with refractory TMJ arthritis.

Short Root Anomaly - A Potential "Landmine" for Orthodontic and Orthognathic Surgery Treatment of Patients.

Short root anomaly (SRA) is a poorly understood developmental disorder and can significantly compromise the patient's dental treatment. This case report describes the treatment of a 15-year-old girl with SRA and discusses the implication of this disorder on orthodontic and orthognathic treatment of patients.

Comprehensive treatment approach for condylar hyperplasia and mandibular crowding with custom lingual braces and 2-jaw surgery.

We report on the successful treatment of a 32-year-old woman with condylar hyperplasia and severe mandibular crowding. In addition, her maxilla was canted to the right, her mandibular midline and chin point deviated to the left, and her maxillary canines were missing. The treatment plan included (1) aligning and leveling the teeth in both arches, (2) correcting overbite and overjet, (3) performing LeFort I osteotomy and bilateral split osteotomies, and (4) correcting the malocclusion postsurgically. The orthodontic treatment was performed with custom lingual braces and clear brackets, and virtual surgical planning techniques were used to plan the orthognathic surgery. The condylar hyperplasia and the mandibular crowding were corrected. At the end of treatment, the patient's face appeared symmetrical. The results suggest that esthetic and functional results can be achieved with the cooperation of 2 specialties and the use of state-of-the-art technology.

Three-dimensional Analysis of Normal Facial Morphologies of Asians and Whites: A Novel Method of Quantitative Analysis.

The purpose of this study is to compare 3-dimensional facial averages of Asians (Koreans and Chinese) and Houstonian white faces using a (3-dimensional) surface imaging system. METHODS: Three-dimensional images of Korean adults (Seoul, Korea) with class I malocclusion captured using the 3dMDface. The images of 138 Koreans were processed to generate average male and female facial shells using Rapidform 2006 plus pack 2 software and then superimposed and compared with the average shells of Chinese adults (Xi' An, China) and white adults (Houston, Tex.). RESULTS: The average Korean male and female faces were wider with prominent malar and zygomatic areas when compared with the white faces. The average white male and female faces showed more protrusion in the glabella, nasion, rhinion, and the soft-tissue pogonion than the Korean faces. The average Korean male face was retrusive at masseteric region while having more prominent lips, nasal tip, and supraglabella than the Chinese counterpart. The average Korean female face was narrower than the average Chinese female face, but there was more protrusion in the periorbital, nasal tip, and malar region seen in the Korean female face. CONCLUSIONS: Although the average faces of Chinese and Korean populations in this study showed remarkable similarities, there were distinct differences seen in the facial morphology of the 2 Asian groups. Three-dimensional imaging can be effectively used to establish population facial norms and to quantify the variations seen between different ethnicities. This information may be used in the clinical environment for plastic, oral, and maxillofacial surgery and orthodontics.