Molecularly imprinted nanoparticles with recognition properties towards diphtheria toxin for ELISA applications.

Plastic antibodies can be used for in vitro neutralization of biomacromolecules with different fragments due to their potential in separation, purification, chemical sensor, catalysis and drug production studies. These polymer nanoparticles with binding affinity and selectivity comparable to natural antibodies were prepared using functional monomer synthesis and copolymerization of acrylic monomers via miniemulsion polymerization. As a result, the in vitro cytotoxic effect from diphtheria toxin was reduced by MIPs. In vitro imaging experiments of polymer nanoparticles (plastic antibodies) were performed to examine the interaction of diphtheria toxin with actin filaments, and MIPs inhibited diphtheria toxin damage on actin filaments. The enzyme-linked immunosorbent assay (ELISA) was performed with plastic antibodies labeled with biotin, and it was determined that plastic antibodies could also be used for diagnostic purposes. We report that molecularly imprinted polymers (MIPs), which are biocompatible polymer nanoparticles, can capture and reduce the effect of diphtheria toxic and its fragment A.

Macromolecules can be imprinted by using their fragments as template molecules.MIPs gain an affinity for the template molecule by covalent binding, non-covalent interactions or ligand interactions, as well as the ability to bind, release and recognize the template molecule.The viability of cells treated with DT, NIPs and MIPs was determined by MTT assay.Immunofluorescence staining studies examined structural changes in actin filaments in HUVEC treated with DT, NIPs and MIPs.FA imprinted polymer has the ability to bind whole diphtheria toxin.FA-MIP gave significant results in terms of specificity in ELISA using diphtheria toxin.

Stimuli-responsive poly(hydroxyethyl methacrylate) hydrogels from carboxylic acid-functionalized crosslinkers.

Tailoring hydrogel properties by modifications of the crosslinker structure is a good method for the design of hydrogels with a wide range of properties. In this study, two novel carboxylic acid-functionalized dimethacrylate crosslinkers (1a and 2a) are synthesized by the reaction of poly(ethylene glycol) or 2-hydroxyethyl disulfide with tert-butyl α-bromomethacrylate followed by cleavage of tert-butyl groups using trifluoroacetic acid. Their copolymerization reactivity with 2-hydroxyethyl methacrylate (HEMA) investigated by photopolymerization studies performed on photo-differential scanning calorimetry shows higher reactivity of 2a compared to 1a. These crosslinkers are then used at different ratios for fabrication of pH- and redox-responsive poly(2-hydroxyethyl methacrylate)-based hydrogels. The swelling behavior of the hydrogels is found to be dependent on the structure of the crosslinker, degree of crosslinking, pH, and CaCl2 concentration. The redox-responsive behavior is demonstrated by degradation of the hydrogel upon exposure to 1,4-dithiothreitol. The dye Rhodamine 6G and the drug resorcinol are used as models to demonstrate the pH and redox dependent release of loaded compounds from the hydrogels. The electrostatic interactions between the carboxylate groups and the positively charged R6G are found to govern the release profile in DTT and counteract the diffusion of dye molecules and significant amount of release (79% in 120 hr) occurs only at highly acidic conditions. The degradation mediated release in DTT is observed better in case of resorcinol (around 88% in 5 hr). Overall, these hydrogels can be regarded as good candidates for several applications, such as matrices for controlled release, tissue repair, and regeneration.

Zwitterionic phosphorylcholine grafted chitosan nanofiber: Preparation, characterization and in-vitro cell adhesion behavior.

In this study, zwitterionic phosphorylcholine grafted electrospun chitosan fiber was accomplished in three steps: (1) Azide groups on the chitosan were regioselectively replaced with hydroxyl side group and then the product was electrospun. (2) Chitosan based macroinitiator was prepared using an azide-alkyne click reaction from azide-functionalized electrospun chitosan fiber. (3) Poly(2-methacryloyloxyethyl phosphorylcholine) (MPC) was grafted onto the electrospun chitosan fiber by atom transfer radical polymerization (ATRP) in order to enhance cellular viability and proliferation of 3T3, ECV and Saos. The structure of surface modified chitosan was characterized by Fourier transform infrared spectrometer (FT-IR) and 1H nuclear magnetic resonance (1H NMR). The surface morphology of the nanofibers was investigated by scanning electron microscope (SEM). In-vitro cellular attachment and spreading experiments of 3T3, ECV304 and Saos were performed on electrospun chitosan fibers in the presence and the absence of MPC grafting. Poly(MPC) grafted electrospun fiber showed an excellent performance due to phosphorylcholine groups mimicking the natural phospholipid.

Immobilization of α-amylase onto poly(glycidyl methacrylate) grafted electrospun fibers by ATRP.

In this study, novel α-amylase immobilized poly(vinyl alcohol) (PVA) nanofibers were prepared. The PVA nanofiber surfaces were functionalized with 2-bromoisobutyryl bromide (BiBBr) and followed by surface initiated atom transfer radical polymerization (SI-ATRP) of glycidyl methacrylate (GMA). The morphology of the poly(glycidyl methacrylate) (PGMA) grafted PVA nanofibers was characterized by scanning electron microscopy (SEM). Also PGMA brushes were confirmed by X-ray photo electron microscopy (XPS). α-Amylase was immobilized in a one step process onto the PGMA grafted PVA nanofiber. The characteristic properties of the immobilized and free enzymes were examined. The thermal stability of the enzyme was improved and showed maximum activity at 37 °C by immobilization. pH values of the maximum activity of the free and immobilized enzymes were also found at 6.0 and 6.5, respectively. Free enzyme lost its activity completely within 15 days. The immobilized enzyme lost only 23.8% of its activity within 30 days.

Cell growth on in situ photo-cross-linked electrospun acrylated cellulose acetate butyrate.

In this study, electrospinning was combined with UV curing technology for producing in situ photo cross-linked fibers from methacrylated cellulose acetate butyrate (CABIEM). ECV304 and 3T3 cells were seeded on electrospun fibrous scaffolds. Collagen modified CABIEM fibers were also prepared for improving cell adhesion and proliferation. Cross-linking and the morphology of the fibers were characterized by ATR-FTIR spectrometry and environmental scanning electron microscopy (ESEM). The cytotoxicity of the fibers was examined using the MTT cytotoxicity assay. According to the results, electrospun fibrous scaffolds are non-toxic and cell viability depends on the amount of collagen. It was found that cell adhesion and cell growth were enhanced as the collagen percentage was increased.

Preparation of biocompatible, UV-cured fumarated poly(ether-ester)-based tissue-engineering hydrogels.

The aim of this study was to develop biodegradable, photo-polymerizable in situ gel-forming systems prepared from a fumaric acid monoethyl ester (FAME) modified poly(lactide-co-glycolide) (PLGA) co-polymer. By reacting lactide and glycolide in the presence of stannous octoate as a catalyst and 2-ethyl,2-hydroxymethyl 1,3-propanediol as an initiator, hydroxyl terminated branched PLGA was synthesized. Afterwards, at room temperature hydroxyl terminated branched PLGA was reacted with fumaric acid monoethyl ester (FAME). N,N'-dicyclohexylcarbodiimide and triethylamine were used as a coupling agent and catalyst, respectively. The gel percentage, equilibrium mass swelling, degradation profile and polymerization kinetics of the hydrogels were investigated. All of the results were influenced by the amount of FAME modified PLGA co-polymer. Biocompatibility of the hydrogels was examined by using MTT cytotoxicity assay. According to the results, hydrogels are biocompatible and cell viability percentage depends on the amount of PLGA co-polymer. While the amount was 15% in hydrogel composition, cell viability was 100%, but after increasing the PLGA co-polymer amount to 30% the viability reduced to 78%.

Preparation of collagen modified photopolymers: a new type of biodegradable gel for cell growth.

In this study a new branched methacrylated poly(propylene glycol-co-lactic acid) (PPG-PLA-IEM) and methacrylated cellulose acetate butyrate resin (CAB-IEM) were synthesized. Hydrogels with various amounts of PPG-PLA-IEM and CAB-IEM (25, 50 and 75 wt% IEM modified) were prepared by photopolymerization. Collagen tethered PEG-monoacrylate (PEGMA-collagen) was prepared and introduced as a bioactive moiety to modify the hydrogel in order to enhance cell affinity. In vitro attachment and growth of 3T3 mouse fibroblasts and human umbilical vein endothelial cells (HUVEC) on the hydrogels with and without collagen were also investigated. It was observed that, the collagen improves the cell adhesion onto the hydrogel surface. With the increasing amount of collagen, cell viability increased by 28% for ECV304 (P < 0.05) and 30% for 3T3 (P < 0.05).

Photopolymerized injectable RGD-modified fumarated poly(ethylene glycol) diglycidyl ether hydrogels for cell growth.

In this study, photopolymerized hydrogels of fumarated poly(ethylene glycol) diglycidyl-co- poly(ethylene glycol) diacrylate have been synthesized and modified with cell adhesion peptide, Arg-Gly-Asp (RGD). The structural and mechanical properties of the hydrogels are found to be poly(ethylene glycol) diacrylate (PEGDA) dependent. The percentage of gelation is increased from 72 to 89 wt.-% when the amount of the crosslinker co-monomer (PEGDA) in the hydrogel formulation is increased from 20 to 40 wt.-%. In the present case, the equilibrium mass swelling is decreased from 216 to 93%. The viscosities of the uncured formulations have also been measured and likewise, the results were influenced by the increasing amount of PEGDA that reduced the value from 83 to 36 cP. The compressive modulus of the prepared hydrogels was improved with the addition of the PEGDA. Cell growth experiments have been performed by comparing the properties of the hydrogels with and without RGD units. The results show that RGD units enhance the adhesion of cells to the surface of the hydrogels. SEM-EDS studies reveal that nitrogen and calcium are produced on the osteoblast-seeded surface of the scaffold within the culture time period. [Figure: see text].

Synthesis and characterization of poly(L-lactic acid-co-ethylene oxide-co-aspartic acid) and its interaction with cells.

Multiblock terpolymer of poly(L-lactic acid)/poly(ethylene oxide)/poly(L-aspartic acid), (PLLA/PEO/PAsp) was synthesized by ring opening polymerization of beta -benzyl L-aspartate N-carboxyanhydride, Asp(OBzl)-NCA with alpha-omega -hydroxy terminated triblock PLLA/PEO/PLLA copolymer. The resulting multiblock terpolymer was characterized by several techniques including Fourier transform infrared spectroscopy and differential scanning calorimetry.(1)H nuclear magnetic resonance spectra indicated the molar ratio of PLLA/PEO/PAsp (OBzl) to be 86/10/4. Thermal gravimetric analysis and environmental scanning electron microscopy data showed that PLLA/PEO/PAsp had crystalline and brittle structure. In order to improve its mechanical and physical properties, the terpolymer was blended with high molecular weight poly(L-lactic-co-glycolic acid) copolymer, PLGA(85/15) (M(w): 95000 gmol(-1)) in 25/75 and 50/50 mole ratios. The hydrolytical degradation properties of these polymers were studied. Degradation experiments were performed during a 48-day period in pH:7.4 phosphate-buffered saline (PBS) at 37 degrees C. The observed molecular weight losses were 91% and 67% for the 25/75 and 50/50 mixtures, respectively. In vitro attachment and growth of L929 mouse fibroblasts on these biopolymers were also investigated. Cell growth experiments indicated that the copolymer blend allowed the attachment and growth of cells.

Preparation of poly(N-isopropylacrylamide/itaconic acid) copolymeric hydrogels and their drug release behavior.

N-isopropylacrylamide/itaconic acid copolymeric hydrogels were prepared by irradiation of the ternary mixtures of N-isopropylacrylamide/itaconic acid/water by gamma-rays at ambient temperature. The effect of comonomer concentration, irradiation dose and pH on the swelling equilibria were studied. Lidocaine was used as a model drug for the investigation of drug release behaviour of hydrogels. Lidocaine adsorption capacity of the hydrogels were found to increase from 3.6 to 862.1 (mg lidocaine/g dry gel) with increasing amount of itaconic acid in the gel structure. Adsorption and release processes were followed at 4 and 37 degrees C, respectively. The release studies showed that the basic parameters affecting the drug release behaviour of the hydrogels were pH and temperature of the solution and cross-link density of the gels.

Synthesis and characterization of glycolide, L-lactide, and PDMS-based terpolymers as a support for cell cultures.

Poly(lactic acid)/poly(glycolic acid)/poly(dimethylsiloxane) (PLGA/TEGOMER) terpolymers have been synthesized by the ring-opening polymerization of L-lactide and glycolide with alpha,omega-amine-terminated poly(dimethylsiloxane) prepolymer, using stannous octoate as a catalyst. The resulting terpolymers were characterized by various analytical techniques including size exclusion chromatography, 1H-nuclear magnetic resonance (1H-NMR), Fourier transform infrared spectroscopy, and differential scanning calorimetry. The data showed that the terpolymers presented an amorphous structure. The glass transition temperature decreased with increasing TEGOMER unit content. For in vitro degradation studies, porous films were fabricated using a solvent-casting, particulate leaching technique. Degradation of the PLGA/TEGOMER terpolymer was studied in phosphate-buffered saline at pH 7.4 and 37 degrees C. The degradation was followed by intrinsic viscosity, mass loss, and molecular weight measurements, and 1H-NMR spectroscopy. The mass loss after 55 days was 76% for the PLGA/TEGOMER (71/24/5) sample. Cell growth experiments using Swiss 3T3 fibroblasts demonstrated that PLGA/TEGOMER terpolymer matrices allow the attachment and growth of cells.