RESUMO
A MM-loaded sub-THz on-chip antenna with a narrow beamwidth, 9 dB gain and a simulated peak efficiency of 76% at the center frequency of 300 GHz is presented. By surrounding the antenna with a single MM-cell ring defined solely on the top metal of the back-end of line, an efficient suppression of the surface waves is obtained. The on-chip antenna has been designed using IHPs 130 nm SiGe BiCMOS technology with a 7-layer metallization stack, combined with the local backside etching process aimed to creating an air cavity which is then terminated by a reflective plane. By comparing the measured MM-loaded antenna performances to its non-MM-loaded counterpart, an enhanced integrity of the main lobe due to the MM-cells shielding effect can be observed. An excellent agreement between the simulated and measured performances has been found, which makes the MM-loaded antennas a valid alternative for the upcoming next-generation sub-THz transceivers.
RESUMO
The investigation of the thermal properties of an array of microbolometers has been carried out by mean of two independent numerical analysis, respectively the Direct-Simulation Monte Carlo (DSMC) and the classic diffusive approach of the Fourier's equation. In particular, the thermal dissipation of a hot membrane placed in a low-pressure cavity has been studied for different values of the temperature of the hot body and for different values of the pressure of the environment. The results for the heat flux derived from the two approaches have then been compared and discussed.
