Leptin attenuates the osteogenic induction potential of BMP9 by increasing ß-catenin malonylation modification via Sirt5 down-regulation.

BMP9 has demonstrated significant osteogenic potential. In this study, we investigated the effect of Leptin on BMP9-induced osteogenic differentiation. Firstly, we found Leptin was decreased during BMP9-induced osteogenic differentiation and serum Leptin concentrations were increased in the ovariectomized (OVX) rats. Both in vitro and in vivo, exogenous expression of Leptin inhibited the process of osteogenic differentiation, whereas silencing Leptin enhanced. Exogenous Leptin could increase the malonylation of ß-catenin. However, BMP9 could increase the level of Sirt5 and subsequently decrease the malonylation of ß-catenin; the BMP9-induced osteogenic differentiation was inhibited by silencing Sirt5. These data suggested that Leptin can inhibit the BMP9-induced osteogenic differentiation, which may be mediated through reducing the activity of Wnt/ß-catenin signalling via down-regulating Sirt5 to increase the malonylation level of ß-catenin partly.

Optimization of the Thermally Conductive Low-k Polymer Dielectrics Based on Multisource Free-Volume Effects.

Polymers/polymer matrix composites possessing low dielectric constants (low-k polymer dielectrics) contribute to the advance of electronics, for instance, microprocessor chips, mobile phone antennas, and data communication terminals. However, the intrinsic long-chain structural characteristic results in poor thermal conductivities, which draw heat accumulation and undermine the outstanding low-k performance of polymers. Herein, multisource free-volume effects that combine two novel kinds of extra free volume with the known in-cage free volume of polyhedral oligomeric silsesquioxanes (POSSs) are discussed to reduce the capacity for dielectric constant reduction. The multisource free-volume effects of POSSs are associated with the thermal conductive network formed by the hexagonal boron nitride (BN) in the polymer matrix. The results show a decent balance between low-k performance (dielectric constant is 2.08 at 1 MHz and 1.98 at 10 GHz) and thermal conductivity (0.555 W m-1 K-1, 4.91 times the matrix). The results provide a new idea to maximize the free-volume effects of POSSs to optimize dielectric properties together with other desired performances for the dielectrics.

Achieving a Wide-Range Linear Piezoresistive Response in Electrowritten Soft-Hard Polymer Blends via Salami-Inspired Heterostructure Design.

Flexible electronics capable of acquiring high-precision signals are in great demand for the development of the internet of things and intelligent artificial. However, it is currently a challenge to simultaneously achieve high signal linearity and sensitivity for stretchable resistive sensors over a wide strain range toward advanced application scenarios requiring high signal accuracy, e.g., sophisticated physiological signal discrimination and displacement measurement. Herein, a film strain sensor, which has an electrical and mechanical dual heterostructure, was fabricated via a direct near-field electrowriting and molecule-guided in situ growth of silver nanoparticles with different concentrations on high-modulus polystyrene domains and low-modulus styrene-butadiene copolymers with a salami-like morphology. Mechanism analyses from both theoretical and experimental investigations reveal that the salami-like heteromodulus microstructure regulates microcrack propagation routes, while the heteroconductivity changes the electron transport paths and amplifies the resistance increase during crack propagation. Therefore, the as-designed strain sensor shows a linear resistive response within ca. 70% strain with a gauge factor of 25, unveiling a simple and scalable strategy for trading off signal linearity and sensitivity over a wide strain range for the fabrication of high-performance linear strain sensors.

Corrigendum: Study on the pathogenesis of MiR-6324 regulating diarrheal irritable bowel syndrome and bioinformatics analysis.

[This corrects the article DOI: 10.3389/fphar.2023.1044330.].

Polypyrrole@CNT@PU Conductive Sponge-Based Triboelectric Nanogenerators for Human Motion Monitoring and Self-Powered Ammonia Sensing.

Elastic sponges are ideal materials for triboelectric nanogenerators (TENGs) to harvest irregular and random mechanical energy from the environment. However, the conductive design of the elastic materials in TENGs often limits its applications. In this work, we have demonstrated that an elastic conductive sponge can be used as the triboelectric layer and electrode for TENGs. Such an elastic conductive sponge is prepared by a simple way of adsorbing multiwalled carbon nanotubes and monomers of pyrrole to grow conductive polypyrroles on the surface of an elastic polyurethane (PU) sponge. Due to the porous structure of the PU sponge and the conductive multiwalled carbon nanotubes (MWCNTs), PPy on the surface of PU could provide a large contact area to improve the output performance of TENGs, and the conductive sponge-based TENG could generate an output of open-circuit voltage of 110 V or a short-circuit current of 12 µA, respectively. The good flexibility of the conductive PU sponge makes the TENG harvest the kinetic energy of disordered motion with different amplitudes, allowing for human motion monitoring. Furthermore, the porous structure of PU and the synergistic effects of PPy and MWCNTs enable the conductive sponge to sense NH3 as a self-powered NH3 sensor. This work offers a simple way to construct a flexible TENG system for random mechanical energy harvesting, human motion monitoring, and self-powered NH3 sensing.

Linear Strain Sensors via a Spatial Heteromodulus Tricontinuous Structure Design for High-Resolution Recording of Snoring Breath.

Porous conductive elastomer composites are very attractive for designing flexible and air-permeable mechanical sensors for healthcare, while it is challenging to achieve a linear and sensitive electromechanical response over a wide strain range for high-resolution recording of physiological activities and body motions. Here, a scalable strategy is developed to construct porous elastomer composites with a bamboo-shaped heteromodulus microstructure in the pores for the fabrication of linear stretchable strain sensors. Such a spatial heteromodulus microstructure is fabricated via phase separation and selective location of high-modulus phase during melt compounding of elastomers and thermoplastics, together with green etching of the water-soluble plastic in the tricontinuous elastomer composites. The bamboo-shaped heteromodulus microstructure is constructed on the pore struts via the fracture of a high-modulus polymer self-assembled on the pore surface and relaxation recovery of the elastomer matrix after prestretching, which blocks the propagation of cut-through microcracks upon stretching. The composites with super low resistance after in situ growth of silver nanoparticles sustain up to 110% tensile strain with a linear and sensitive electromechanical response, demonstrating potential applications in discriminating respiration status and monitoring snoring breath. This work unveils a new approach to fabricate high-performance air-permeable strain sensors in a simple and scalable way.

Metal-Organic Framework Based Triboelectric Nanogenerator for a Self-Powered Methanol Sensor with High Sensitivity and Selectivity.

Triboelectric nanogenerators have shown great potential in the area of self-powered gas sensors in the past decade. In this paper, we developed a triboelectric nanogenerator (TENG) based on spiky structured ZIF-8@ZnO, which can harvest energy with high efficiency and act as a self-powered methanol sensor. The open-circuit voltage and short-circuit current generated by a ZIF-8@ZnO-based TENG is 58 V and 10 µA, achieving 2.4 times and 3.3 times enhancement compared to ZnO-based TENGs. The TENG can charge capacitors fast and light up at least 40 LEDs. ZIF-8@ZnO-based TENGs show good sensitivity and selectivity to methanol gas at room temperature due to the porous structure provided by ZIF-8 and the heterostructure of ZIF-8@ZnO. The response of ZIF-8@ZnO-based TENG to methanol reaches 30.35% at 100 ppm with excellent response (∼5.9 s) and recovery time (∼2.2 s). This work demonstrates the application of MOF-modified metal oxide semiconductors based on a self-powered gas sensor and proposes a promising solution to enhance the output performance and sensing properties of TENGs based on metal oxide semiconductors.

Study on the pathogenesis of MiR-6324 regulating diarrheal irritable bowel syndrome and bioinformatics analysis.

Objective: To investigate the pathogenesis of IBS-D by bioinformatics analysis of the differential microRNAs in rat colon tissue and to analyze and predict the function of their target genes. Methods: Twenty male Wistar rats of SPF class were randomly divided into two groups, the model group was manipulated using the colorectal dilatation method + chronic restraint stress method to establish the IBS-D model; while the blank group stroked the perineum at the same frequency. Screening of differential miRNAs after High-throughput sequencing of rat colon tissue. GO and KEGG analysis of target genes using the DAVID website, further mapping using RStudio software; the STRING database and the Cytoscape software were used to obtain the protein interaction network (PPI) of the target genes as well as the core genes. Finally, qPCR was used to detect the expression of target genes in the colon tissue of two groups of rats. Results: After the screening, miR-6324 was obtained as the key of this study. The GO analysis of target genes of miR-6324 is mainly involved in protein phosphorylation, positive regulation of cell proliferation, and intracellular signal transduction; it affects a variety of cellular components such as cytoplasm, nucleus, and organelles on the intracellular surface; it is also involved in molecular functions such as protein binding, ATP binding, and DNA binding. KEGG analysis showed that the intersecting target genes were mainly enriched in cancer pathways, proteoglycans in cancer, neurotrophic signaling pathway, etc. The protein-protein interaction network screened out the core genes mainly Ube2k, Rnf41, Cblb, Nek2, Nde1, Cep131, Tgfb2, Qsox1, and Tmsb4x. The qPCR results showed that the expression of miR-6324 decreased in the model group, but the decrease was not significant. Conclusion: miR-6324 may be involved in the pathogenesis of IBS-D as a potential biological target and provide further ideas for research on the pathogenesis of the disease or treatment options.

LCN2 Inhibits the BMP9-induced Osteogenic Differentiation through Reducing Wnt/ß-catenin Signaling via Interacting with LRP6 in Mouse Embryonic Fibroblasts.

BACKGROUND: Due to its effective osteogenic ability, BMP9 is a promising candidate for bone regeneration medicine. Whereas, BMP9 can also induce adipogenesis simultaneously. LCN2 is a cytokine associated with osteogenesis and adipogenesis. Reducing the adipogenic potential may be a feasible measure to enhance the osteogenic capability of BMP9. OBJECTIVE: The objective of the study was to explore the role of LCN2 in regulating the BMP9-initialized osteogenic and adipogenic differentiation in mouse embryonic fibroblasts (MEFs), and clarify the possible underlying mechanism. METHODS: Histochemical stain, western blot, real-time PCR, laser confocal, immunoprecipitation, cranial defect repair, and fetal limb culture assays were used to evaluate the effects of LCN2 on BMP9-induced osteogenic and adipogenic differentiation, as well as Wnt/ß-catenin signaling. RESULTS: LCN2 was down-regulated by BMP9. The BMP9-induced osteogenic markers were inhibited by LCN2 overexpression, but the adipogenic markers were increased; LCN2 knockdown exhibited opposite effects. Similar results were found in bone defect repair and fetal limb culture tests. The level of ß-catenin nucleus translocation was found to be reduced by LCN2 overexpression, but increased by LCN2 knockdown. The inhibitory effect of LCN2 overexpression on the osteogenic capability of BMP9 was reversed by ß-catenin overexpression; whereas, the effect of LCN2 knockdown on promoting BMP9 osteogenic potential was almost eliminated by ß-catenin knockdown. LCN2 could bind with LRP6 specifically, and the inhibitory effect of LCN2 on the osteogenic potential of BMP9 could not be enhanced by LRP6 knockdown. CONCLUSION: LCN2 inhibits the BMP9-induced osteogenic differentiation but promotes its adipogenic potential in MEFs, which may be partially mediated by reducing Wnt/ß-catenin signaling via binding with LRP6.

Interleukin 6 promotes BMP9-induced osteoblastic differentiation through Stat3/mTORC1 in mouse embryonic fibroblasts.

Interleukin 6 (IL-6) plays a dual role in regulating bone metabolism, although the concrete mechanism is unclear. Bone morphogenetic protein 9 (BMP9) is one of the most potent osteogenic inducers, and a promising alternative for bone tissue engineering. The relationship between IL-6 and BMP9 in osteogenic differentiation remains to be elucidated, and the osteoblastic potential of BMP9 needs to be enhanced to overcome certain shortcomings of BMP9. In this study, we used real-time PCR, western blot, immunofluorescent stain, fetal limb culture and cranial defects repair model to explore the IL-6 role in BMP9-induced osteogenic differentiation in mouse embryonic fibroblasts (MEFs). We found that the rat serum level of IL-6 was increased in the dexamethasone-induced osteoporosis model, and IL-6 expression was detectable in several progenitor cells and MEFs. BMP9 upregulated IL-6 in MEFs, and the BMP9-induced osteoblastic markers were elevated by IL-6, but reduced by IL-6 knockdown. BMP9 and/or IL-6 both activated mTOR, and the IL-6 effect on BMP9-induced osteoblastic markers and bone formation were reduced greatly by mTOR inhibition. Raptor was up-regulated by IL-6 and/or BMP9 specifically, and the osteoblastic markers induced by IL-6 and/or BMP9 were reduced by Raptor knockdown. Meanwhile, Stat-3 was activated by IL-6 and/or BMP9, and the increase of Raptor or osteoblastic markers by IL-6 and/or BMP9 were reduced by Stat-3 inhibition. The Raptor promoter activity was regulated by p-Stat-3. Our finding suggested that IL-6 can promote the BMP9 osteoblastic potential, which may be mediated through activating Stat-3/mTORC1 pathway.

Configurational Entropy Regulation in Polyolefin Elastomer/Paraffin Wax Vitrimers by Thermally Responsive Liquid-Solid Transition for Force Storage.

The work output of shape memory polymers during shape shifting is desired for practical application as actuators. Herein, a polyolefin elastomer (POE) and paraffin wax (PW) are co-cross-linked by dynamic boronic ester bonds to enhance the network elasticity and the stress transfer between the two phases, endowing high force storage capacity to the prepared vitrimers. Depending on the phase of PW, one-way force storage is realized by programming at a low temperature (25 °C), owing to which solid PW can promote the locking of POE chains in a low-entropy state, while reversible force storage can be realized by programming at a high temperature (75 °C), owing to which the relaxation of chains facilitated by liquid PW can promote the construction of a stable structure. Based on one-way force storage, a weight-lifting machine with a weight of 20 mg prestrained at 25 °C can lift a 100 g weight, showing a lifting ratio of no less than 5000, with a high work output of 0.98 J/g. A high-temperature alarm can be triggered at varied temperatures (43-56 °C) through controlled force release by adjusting the PW content and programmed prestrains. Based on the reversible force storage, crawling robots and artificial muscles with a work output of 0.025 J/g are demonstrated. The dynamic cross-linking network also confers mold-free self-healing capability to POE/PW vitrimers, and the repair efficiency is enhanced compared with the POE vitrimer due to the improved POE chain motion by liquid PW. The realized one-way and reversible force storage and self-healing by POE/PW vitrimers pave the way for the application of SMPs in the fields of soft robotic actuators.

Hierarchical network relaxation of a dynamic cross-linked polyolefin elastomer for advanced reversible shape memory effect.

Reversible shape-memory polymers (RSMPs) are highly desired for soft actuators due to the repeatability of deformation. Herein, a polyolefin elastomer vitrimer (POEV) was prepared by constructing a dynamic cross-linked network based on boronic ester bonds. POEV showed varied network relaxation in a wide temperature range due to hierarchical network relaxation, and then the entropy decreased and the relaxation of POEV chains was facilely controlled by temperature. The controllable relaxation of POEV by programming the temperature enabled the actuation domain with a reduction in entropy and the skeleton domain with a relatively high entropy can be built in POEV, greatly affecting the reversible shape memory effects (RSMEs). The topological rearrangement resulted from the activated exchange of dynamic covalent bonds, which enables POEV with good shape reconfigurability, and allows for complicated 3D shapes and shape-shifting on demand. More interestingly, combining the decreasing entropy of POEV chains and fully topological rearrangement tailored by temperature, hybrid aligned carbon nanotubes (CNTs) can be constructed in POEV via a two-stage training. Then, the aligned CNTs can enhance the elasticity and act as a hybrid skeleton for RSMEs, avoiding the negative impact of CNTs on the reversible actuation strain. The hierarchical network relaxation facilitates combining all these unusual properties in one shape memory network synergistically, paving new avenues for realizing smart materials with advanced RSME.

Electro-microenvironment modulated inhibition of endogenous biofilms by piezo implants for ultrasound-localized intestinal perforation disinfection.

Endogenous bacterial infections from damaged gastrointestinal (GI) organs have high potential to cause systemic inflammatory responses and life-threatening sepsis. Current treatments, including systemic antibiotic administration and surgical suturing, are difficult in preventing bacterial translocation and further infection. Here, we report a wireless localized stimulator composed of a piezo implant with high piezoelectric output serving as an anti-infective therapy patch, which aims at modulating the electro-microenvironment of biofilm around GI wounds for effective inhibition of bacterial infection if combined with ultrasound (US) treatment from outside the body. The pulsed charges generated by the piezo implant in response to US stimulation transfer into bacterial biofilms, effectively destroying their macromolecular components (e.g., membrane proteins), disrupting the electron transport chain of biofilms, and inhibiting bacterial proliferation, as proven by experimental studies and theoretical calculations. The piezo implant, in combination with US stimulation, also exhibits successful in vivo anti-infection efficacy in a rat cecal ligation and puncture (CLP) model. The proposed strategy, combining piezo implants with controllable US activation, creates a promising pathway for inhibiting endogenous bacterial infection caused by GI perforation.

Matricellular Protein SMOC2 Potentiates BMP9-Induced Osteogenic Differentiation in Mesenchymal Stem Cells through the Enhancement of FAK/PI3K/AKT Signaling.

Mesenchymal stem cells (MSCs) can self-renew and differentiate into multiple lineages, making MSC transplantation a promising option for bone regeneration. Both matricellular proteins and growth factors play an important role in regulating stem cell fate. In this study, we investigated the effects of matricellular protein SMOC2 (secreted modular calcium-binding protein 2) on bone morphogenetic protein 9 (BMP9) in mouse embryonic fibroblasts (MEFs) and revealed a possible molecular mechanism underlying this process. We found that SMOC2 was detectable in MEFs and that exogenous SMOC2 expression potentiated BMP9-induced osteogenic markers, matrix mineralization, and ectopic bone formation, whereas SMOC2 knockdown inhibited these effects. BMP9 increased the levels of p-FAK and p-AKT, which were either enhanced or reduced by SMOC2 and FAK silencing, respectively. BMP9-induced osteogenic markers were increased by SMOC2, and this increase was partially abolished by silencing FAK or LY290042. Furthermore, we found that general transcription factor 2I (GTF2I) was enriched at the promoter region of SMOC2 and that integrin ß1 interacted with SMOC2 in BMP9-treated MEFs. Our findings demonstrate that SMOC2 can promote BMP9-induced osteogenic differentiation by enhancing the FAK/PI3K/AKT pathway, which may be triggered by facilitating the interaction between SMOC2 and integrin ß1.

Neuroprotective effects of insulin-like growth factor-2 in 6-hydroxydopamine-induced cellular and mouse models of Parkinson's disease.

Skin-derived precursor Schwann cells have been reported to play a protective role in the central nervous system. The neuroprotective effects of skin-derived precursor Schwann cells may be attributable to the release of growth factors that nourish host cells. In this study, we first established a cellular model of Parkinson's disease using 6-hydroxydopamine. When SH-SY5Y cells were pretreated with conditioned medium from skin-derived precursor Schwann cells, their activity was greatly increased. The addition of insulin-like growth factor-2 neutralizing antibody markedly attenuated the neuroprotective effects of skin-derived precursor Schwann cells. We also found that insulin-like growth factor-2 levels in the peripheral blood were greatly increased in patients with Parkinson's disease and in a mouse model of Parkinson's disease. Next, we pretreated cell models of Parkinson's disease with insulin-like growth factor-2 and administered insulin-like growth factor-2 intranasally to a mouse model of Parkinson's disease induced by 6-hydroxydopamine and found that the level of tyrosine hydroxylase, a marker of dopamine neurons, was markedly restored, α-synuclein aggregation decreased, and insulin-like growth factor-2 receptor down-regulation was alleviated. Finally, in vitro experiments showed that insulin-like growth factor-2 activated the phosphatidylinositol 3 kinase (PI3K)/AKT pathway. These findings suggest that the neuroprotective effects of skin-derived precursor Schwann cells on the central nervous system were achieved through insulin-like growth factor-2, and that insulin-like growth factor-2 may play a neuroprotective role through the insulin-like growth factor-2 receptor/PI3K/AKT pathway. Therefore, insulin-like growth factor-2 may be an useful target for Parkinson's disease treatment.

Scale-Mark-Based Gauge Reading for Gauge Sensors in Real Environments with Light and Perspective Distortions.

Nowadays, many old analog gauges still require the use of manual gauge reading. It is a time-consuming, expensive, and error-prone process. A cost-effective solution for automatic gauge reading has become a very important research topic. Traditionally, different types of gauges have their own specific methods for gauge reading. This paper presents a systematized solution called SGR (Scale-mark-based Gauge Reading) to automatically read gauge values from different types of gauges. Since most gauges have scale marks (circular or in an arc), our SGR algorithm utilizes PCA (principal components analysis) to find the primary eigenvector of each scale mark. The intersection of these eigenvectors is extracted as the gauge center to ascertain the scale marks. Then, the endpoint of the gauge pointer is found to calculate the corresponding angles to the gauge's center. Using OCR (optical character recognition), the corresponding dial values can be extracted to match with their scale marks. Finally, the gauge reading value is obtained by using the linear interpolation of these angles. Our experiments use four videos in real environments with light and perspective distortions. The gauges in the video are first detected by YOLOv4 and the detected regions are clipped as the input images. The obtained results show that SGR can automatically and successfully read gauge values. The average error of SGR is nearly 0.1% for the normal environment. When the environment becomes abnormal with respect to light and perspective distortions, the average error of SGR is still less than 0.5%.

Janus and Heteromodulus Elastomeric Fiber Mats Feature Regulable Stress Redistribution for Boosted Strain Sensing Performance.

Wearable strain sensors have huge potential for applications in healthcare, human-machine interfacing, and augmented reality systems. However, the nonlinear response of the resistance signal to strain has caused considerable difficulty and complexity in data processing and signal transformation, thus impeding their practical applications severely. Herein, we propose a simple way to achieve linear and reproducible resistive signals responding to strain in a relatively wide strain range for flexible strain sensors, which is achieved via the fabrication of Janus and heteromodulus elastomeric fiber mats with micropatterns using microimprinting second processing technology. In detail, both isotropic and anisotropic fiber mats can turn into Janus fiber mats with periodical and heteromodulus micropatterns via controlling the fiber fusion and the diffusion of local macromolecular chains of thermoplastic elastomers. The Janus heterogeneous microstructure allows for stress redistribution upon stretching, thus leading to lower strain hysteresis and improved linearity of resistive signal. Moreover, tunable sensing performance can be achieved by tailoring the size of the micropatterns on the fiber mat surface and the fiber anisotropy. The Janus mat strain sensors with high signal linearity and good reproducibility have a very low strain detection limit, enabling potential applications in human-machine interfacing and intelligent control fields if combined with a wireless communication module.

Self-Sensing Actuators Based on a Stiffness Variable Reversible Shape Memory Polymer Enabled by a Phase Change Material.

Soft actuators with integrated mechanical and actuation properties and self-sensing ability are still a challenge. Herein, a stiffness variable polyolefin elastomer (POE) with a reversible shape memory effect is prepared by introducing a typical phase change material, i.e., paraffin wax (PW). It is found that the variable stiffness of POE induced by PW can balance the reversible strain and load-bearing capability of actuators. Especially, carbon nanotubes (CNTs) are concentrated in a thin surface layer by spraying and hot pressing in the soft state of POE/PW blends, providing signal transductions for the strain and temperature perception for actuators. Taking advantage of tunable reversible deformation and mechanical transformation of the POE/PW actuator, different biomimetic robotics, including grippers with high load-bearing capability (weight-lifting ratio > 146), walking robots that can sense angles of joints, and high-temperature warning robots are demonstrated. A scheme combining the variable stiffness and electrical properties provides a versatile strategy to integrate actuation performance and self-sensing ability, inspiring the development of multifunctional composite designs for soft robotics.

Macromolecule Relaxation Directed 3D Nanofiber Architecture in Stretchable Fibrous Mats for Wearable Multifunctional Sensors.

Elastomer fiber mat sensors, which are capable of perceiving mechanical stimuli, temperature, and vapor of chemicals, are highly desirable for designing wearable electronics and human-robot interfacing devices due to good wearability, skin affinity, and durability, and so on. However, it is still challenging to fabricate multiresponsive flexible wearable sensors with three-dimensional (3D) architecture using simple material and structure design. Herein, we report an all-in-one multiresponsive thermoplastic polyurethane (TPU) nanofiber mat sensors composed of crimped elastomer fibers with deposited platinum nanoparticles (PtNPs) on the fiber surface. The 1D TPU nanofibers could be transferred to nanofibers with different 3D nanofiber architectures by controllable macromolecular chain relaxation of aligned elastomer polymers upon poor solvent annealing. The conductive networks of PtNPs on wavy TPU fibers enable the sensor susceptible to multiple stimuli like strain/pressure, humidity, and organic vapors. Besides, the 3D nanofiber architectures allow the strain sensor to detect wider tensile strain and pressure with higher sensitivity due to delicate fiber morphology and structure control. Therefore, this work provides new insights into the fabrication of multifunctional flexible sensors with 3D architecture in an easy way, advancing the establishment of a multiple signal monitoring platform for the health care and human-machine interfacing.

Schwann cells differentiated from skin-derived precursors provide neuroprotection via autophagy inhibition in a cellular model of Parkinson's disease.

Autophagy has been shown to play an important role in Parkinson's disease. We hypothesized that skin-derived precursor cells exhibit neuroprotective effects in Parkinson's disease through affecting autophagy. In this study, 6-hydroxydopamine-damaged SH-SY5Y cells were pretreated with a culture medium containing skin-derived precursors differentiated into Schwann cells (SKP-SCs). The results showed that the SKP-SC culture medium remarkably enhanced the activity of SH-SY5Y cells damaged by 6-hydroxydopamine, reduced excessive autophagy, increased tyrosine hydroxylase expression, reduced α-synuclein expression, reduced the autophagosome number, and activated the PI3K/AKT/mTOR pathway. Autophagy activator rapamycin inhibited the effects of SKP-SCs, and autophagy inhibitor 3-methyladenine had the opposite effect. These findings confirm that SKP-SCs modulate the PI3K/AKT/mTOR pathway to inhibit autophagy, thereby exhibiting a neuroprotective effect in a cellular model of Parkinson's disease. This study was approved by the Animal Ethics Committee of Laboratory Animal Center of Nantong University (approval No. S20181009-205) on October 9, 2018.