RESUMO
Metabolic dysfunction-associated steatohepatitis (MASH) poses challenges for targeted delivery and retention of therapeutic proteins due to excess extracellular matrix (ECM). Here we present a new approach to treat MASH, termed "Fibrosis overexpression and retention (FORT)". In this strategy, we design (1) retinoid-derivative lipid nanoparticle (LNP) to enable enhanced mRNA overexpression in fibrotic regions, and (2) mRNA modifications which facilitate anchoring of therapeutic proteins in ECM. LNPs containing carboxyl-retinoids, rather than alcohol- or ester-retinoids, effectively deliver mRNA with over 10-fold enhancement of protein expression in fibrotic livers. The carboxyl-retinoid rearrangement on the LNP surface improves protein binding and membrane fusion. Therapeutic proteins are then engineered with an endogenous collagen-binding domain. These fusion proteins exhibit increased retention in fibrotic lesions and reduced systemic toxicity. In vivo, fibrosis-targeting LNPs encoding fusion proteins demonstrate superior therapeutic efficacy in three clinically relevant male-animal MASH models. This approach holds promise in fibrotic diseases unsuited for protein injection.
Assuntos
Nanopartículas , RNA Mensageiro , Animais , Masculino , Nanopartículas/química , Humanos , Camundongos , RNA Mensageiro/genética , RNA Mensageiro/metabolismo , Cirrose Hepática/genética , Cirrose Hepática/patologia , Cirrose Hepática/terapia , Modelos Animais de Doenças , Fígado/metabolismo , Fígado/patologia , Matriz Extracelular/metabolismo , Camundongos Endogâmicos C57BL , Lipídeos/química , Fígado Gorduroso/genética , Fígado Gorduroso/metabolismo , Fígado Gorduroso/patologia , Fibrose , Proteínas Recombinantes de Fusão/genética , Proteínas Recombinantes de Fusão/metabolismo , LipossomosRESUMO
Polyamorphic transition (PT) is a compelling and pivotal physical phenomenon in the field of glass and materials science. Understanding this transition is of scientific and technological significance, as it offers an important pathway for effectively tuning the structure and property of glasses. In contrast to the PT observed in conventional metallic glasses (MGs), which typically exhibit a pronounced first-order nature, herein we report a continuous PT (CPT) without first-order characteristics in high-entropy MGs (HEMGs) upon heating. This CPT behavior is featured by the continuous structural evolution at the atomic level and an increasing chemical concentration gradient with temperature, but no abrupt reduction in volume and energy. The continuous transformation is associated with the absence of local favorable structures and chemical heterogeneity caused by the high configurational entropy, which limits the distance and frequency of atomic diffusion. As a result of the CPT, numerous glass states can be generated, which provides an opportunity to understand the nature, atomic packing, formability, and properties of MGs. Moreover, this discovery highlights the implication of configurational entropy in exploring polyamorphic glasses with an identical composition but highly tunable structures and properties.
RESUMO
The submarine-confined bubble swarm is considered an important constraining environment for the early evolution of living matter due to the abundant gas/water interfaces it provides. Similarly, the spatiotemporal characteristics of the confinement effect in this particular scenario may also impact the origin, transfer, and amplification of chirality in organisms. Here, we explore the confinement effect on the chiral hierarchical assembly of the amphiphiles in the confined bubble array stabilized by the micropillar templates. Compared with the other confinement conditions, the assembly in the bubble scenario yields a fractal morphology and exhibits a unique level of the chiral degree, ordering, and orientation consistency, which can be attributed to the characteristic interfacial effects of the rapidly formed gas/water interfaces. Thus, molecules with a balanced amphiphilicity can be more favorable for the promotion. Not limited to the pure enantiomers, chiral amplification of the enantiomer-mixed assembly is observed only in the bubble scenario. Beyond the interfacial mechanism, the fast formation kinetics of the confined liquid bridges in the bubble scenario endows the assembly with the tunable hierarchical morphology when regulating the amphiphilicity, aggregates, and confined spaces. Furthermore, the chiral-induced spin selectivity (CISS) effect of the fractal hierarchical assembly was systematically investigated, and a strategy based on photoisomerization was developed to efficiently modulate the CISS effect. This work provides insights into the robustness of confined bubble swarms in promoting a chiral hierarchical assembly and the potential applications of the resulting chiral hierarchical patterns in solid-state spintronic and optical devices.
RESUMO
Conversion of plastic wastes to valuable carbon resources without using noble metal catalysts or external hydrogen remains a challenging task. Here we report a layered self-pillared zeolite that enables the conversion of polyethylene to gasoline with a remarkable selectivity of 99% and yields of >80% in 4 h at 240 °C. The liquid product is primarily composed of branched alkanes (selectivity of 72%), affording a high research octane number of 88.0 that is comparable to commercial gasoline (86.6). In situ inelastic neutron scattering, small-angle neutron scattering, solid-state nuclear magnetic resonance, X-ray absorption spectroscopy and isotope-labelling experiments reveal that the activation of polyethylene is promoted by the open framework tri-coordinated Al sites of the zeolite, followed by ß-scission and isomerization on Brönsted acids sites, accompanied by hydride transfer over open framework tri-coordinated Al sites through a self-supplied hydrogen pathway to yield selectivity to branched alkanes. This study shows the potential of layered zeolite materials in enabling the upcycling of plastic wastes.
RESUMO
An organic photovoltaic bulk heterojunction comprises of a mixture of donor and acceptor materials, forming a semi-crystalline thin film with both crystalline and amorphous domains. Domain sizes critically impact the device performance; however, conventional X-ray scattering techniques cannot detect the contrast between donor and acceptor materials within the amorphous intermixing regions. In this study, we employ neutron scattering and targeted deuteration of acceptor materials to enhance the scattering contrast by nearly one order of magnitude. Remarkably, the PM6:deuterated Y6 system reveals a new length scale, indicating short-range aggregation of Y6 molecules in the amorphous intermixing regions. All-atom molecular dynamics simulations confirm that this short-range aggregation is an inherent morphological advantage of Y6 which effectively assists charge extraction and suppresses charge recombination as shown by capacitance spectroscopy. Our findings uncover the amorphous nanomorphology of organic photovoltaic thin films, providing crucial insights into the morphology-driven device performance.
RESUMO
The controlled peptide self-assembly and disassembly are not only implicated in many cellular processes but also possess huge application potential in a wide range of biotechnology and biomedicine. ß-sheet peptide assemblies possess high kinetic stability, so it is usually hard to disassemble them rapidly. Here, we reported that both the self-assembly and disassembly of a designed short ß-sheet peptide IIIGGHK could be well harnessed through the variations of concentration, pH, and mechanical stirring. Microscopic imaging, neutron scattering, and infrared spectroscopy were used to track the assembly and disassembly processes upon these stimuli, especially the interconversion between thin, left-handed protofibrils and higher-order nanotubes with superstructural right-handedness. The underlying rationale for these controlled disassembly processes mainly lies in the fact that the specific His-His interactions between protofibrils were responsive to these stimuli. By taking advantage of the peptide self-assembly and disassembly, the encapsulation of the hydrophobic drug curcumin and its rapid release upon stimuli were achieved. Additionally, the peptide hydrogels facilitated the differentiation of neural cells while maintaining low cell cytotoxicity. We believe that such dynamic and reversible structural transformation in this work provides a distinctive paradigm for controlling the peptide self-assembly and disassembly, thus laying a foundation for practical applications of peptide assemblies.
Assuntos
Nanotubos de Peptídeos , Nanotubos , Nanotubos de Peptídeos/química , Peptídeos/farmacologia , Peptídeos/química , Conformação Proteica em Folha betaRESUMO
Polypeptides, as natural polyelectrolytes, are assembled into tailored proteins to integrate chromophores and catalytic sites for photosynthesis. Mimicking nature to create the water-soluble nanoassemblies from synthetic polyelectrolytes and photocatalytic molecular species for artificial photosynthesis is still rare. Here, we report the enhancement of the full-spectrum solar-light-driven H2 production within a supramolecular system built by the co-assembly of anionic metalloporphyrins with cationic polyelectrolytes in water. This supramolecular photocatalytic system achieves a H2 production rate of 793 and 685â µmol h-1 g-1 over 24â h with a combination of Mg or Zn porphyrin as photosensitizers and Cu porphyrin as a catalyst, which is more than 23â times higher than that of free molecular controls. With a photosensitizer to catalyst ratio of 10000 : 1, the highest H2 production rate of >51,700â µmol h-1 g-1 with a turnover number (TON) of >1,290 per molecular catalyst was achieved over 24â h irradiation. The hierarchical self-assembly not only enhances photostability through forming ordered stackings of the metalloporphyrins but also facilitates both energy and electron transfer from antenna molecules to catalysts, and therefore promotes the photocatalysis. This study provides structural and mechanistic insights into the self-assembly enhanced photostability and catalytic performance of supramolecular photocatalytic systems.
RESUMO
In this work, the nanostructure of oxide dispersion-strengthened steels was studied by small-angle neutron scattering (SANS), transmission electron microscopy (TEM), and atom probe tomography (APT). The steels under study have different alloying systems differing in their contents of Cr, V, Ti, Al, and Zr. The methods of local analysis of TEM and APT revealed a significant number of nanosized oxide particles and clusters. Their sizes, number densities, and compositions were determined. A calculation of hardness from SANS data collected without an external magnetic field, or under a 1.1 T field, showed good agreement with the microhardness of the materials. The importance of taking into account two types of inclusions (oxides and clusters) and both nuclear and magnetic scattering was shown by the analysis of the scattering data.
RESUMO
The topological Hall effect (THE) is the transport response of chiral spin textures and thus can serve as a powerful probe for detecting and understanding these unconventional magnetic orders. So far, the THE is only observed in either noncentrosymmetric systems where spin chirality is stabilized by Dzyaloshinskii-Moriya interactions, or triangular-lattice magnets with Ruderman-Kittel-Kasuya-Yosida-type interactions. Here, a pronounced THE is observed in a Fe-Co-Ni-Mn chemically complex alloy with a simple face-centered cubic (fcc) structure across a wide range of temperatures and magnetic fields. The alloy is shown to have a strong magnetic frustration owing to the random occupation of magnetic atoms on the close-packed fcc lattice and the direct Heisenberg exchange interaction among atoms, as evidenced by the appearance of a reentrant spin glass state in the low-temperature regime and the first principles calculations. Consequently, THE is attributed to the nonvanishing spin chirality created by strong spin frustration under the external magnetic field, which is distinct from the mechanism responsible for the skyrmion systems, as well as geometrically frustrated magnets.
RESUMO
Fluorescent materials with high brightness play a crucial role in the advancement of various technologies such as bioimaging, photonics, and OLEDs. While significant efforts are dedicated to designing new organic dyes with improved performance, enhancing the brightness of existing dyes holds equal importance. In this study, we present a simple supramolecular strategy to develop ultrabright cyanine-based fluorescent materials by addressing long-standing challenges associated with cyanine dyes, including undesired cis-trans photoisomerization and aggregation-caused quenching. Supra-cyanines are obtained by incorporating cyanine moieties in a cyclic peptide-based supramolecular scaffold, and exhibit high fluorescence quantum yields (up to 50 %) in both solution and in the solid state. These findings offer a versatile approach for constructing highly emissive cyanine-based supramolecular materials.
RESUMO
Considerable efforts have been made to develop nanoparticle-based magnetic resonance contrast agents (CAs) with high relaxivity. The prolonged rotational correlation time (τR) induced relaxivity enhancement is commonly recognized, while the effect of the water coordination numbers (q) on the relaxivity of nanoparticle-based CAs gets less attention. Herein, we first investigated the relationship between T1 relaxivity (r1) and q in manganese-based hybrid micellar CAs and proposed a strategy to enhance the relaxivity by increasing q. Hybrid micelles with different ratios of amphiphilic manganese complex (MnL) and DSPE-PEG2000 were prepared, whose q values were evaluated by Oxygen-17-NMR spectroscopy. Micelles with lower manganese doping density exhibit increased q and enhanced relaxivity, corroborating the conception. In vivo sentinel lymph node (SLN) imaging demonstrates that DSPE-PEG/MnL micelles could differentiate metastatic SLN from inflammatory LN. Our strategy makes it feasible for relaxivity enhancement by modulating q, providing new approaches for the structural design of high-performance hybrid micellar CAs.
Assuntos
Micelas , Água , Manganês/química , Linfografia , Imageamento por Ressonância Magnética/métodos , Espectroscopia de Ressonância Magnética , Meios de Contraste/químicaRESUMO
Aiming at the creation of polymers with attractive dynamic properties, herein, rotaxane-branched dendronized polymers (DPs) with rotaxane-branched dendrons attached onto the polymer chains are proposed. Starting from macromonomers with both rotaxane-branched dendrons and polymerization site, targeted rotaxane-branched DPs are successfully synthesized through ring-opening metathesis polymerization (ROMP). Interestingly, due to the existence of multiple switchable [2]rotaxane branches within the attached dendrons, anion-induced reversible thickness modulation of the resultant rotaxane-branched DPs is achieved, which further lead to tunable thermal and rheological properties, making them attractive platform for the construction of smart polymeric materials.
RESUMO
Surfactant-like short peptides are a kind of ideal model for the study of chiral self-assembly. At present, there are few studies on the chiral self-assembly of multicharged surfactant-like peptides. In this study, we adopted a series of short peptides of Ac-I4KGK-NH2 with different combinations of L-lysine and D-lysine residues as the model molecules. TEM, AFM and SANS results showed that Ac-I4LKGLK-NH2, Ac-I4LKGDK-NH2, and Ac-I4DKGLK-NH2 formed the morphologies of nanofibers, and Ac-I4DKGDK-NH2 formed nanoribbons. All the self-assembled nanofibers, including the intermediate nanofibers of Ac-I4DKGDK-NH2 nanoribbons, showed the chirality of left handedness. Based on the molecular simulation results, it has been demonstrated that the supramolecular chirality was directly dictated by the orientation of single ß strand. The insertion of glycine residue demolished the effect of lysine residues on the single strand conformation due to its high conformational flexibility. The replacement of L-isoleucine with Da-isoleucine also confirmed that the isoleucine residues involved in the ß-sheet determined the supramolecular handedness. This study provides a profound mechanism of the chiral self-assembly of short peptides. We hope that it will improve the regulation of chiral molecular self-assembly with achiral glycine, as well.
Assuntos
Nanofibras , Nanotubos de Carbono , Surfactantes Pulmonares , Nanofibras/química , Glicina , Tensoativos/química , Lisina/química , Isoleucina , Lateralidade Funcional , Peptídeos/química , LipoproteínasRESUMO
The black-to-yellow phase transition in perovskite quantum dots (QDs) is more complex than in bulk perovskites, regarding the role of surface energy. Here, with the assistance of in situ grazing-incidence wide-angle and small-angle X-ray scattering (GIWAXS/GISAXS), distinct phase behaviors of cesium lead iodide (CsPbI3 ) QD films under two different temperature profiles-instant heating-up (IHU) and slow heating-up (SHU) is investigated. The IHU process can cause the phase transition from black phase to yellow phase, while under the SHU process, the majority remains in black phase. Detailed studies and structural refinement analysis reveal that the phase transition is triggered by the removal of surface ligands, which switches the energy landscape. The lattice symmetry determines the transition rate and the coexistence black-to-yellow phase ratio. The SHU process allows longer relaxation time for a more ordered QD packing, which helps sustain the lattice symmetry and stabilizes the black phase. Therefore, one can use the lattice symmetry as a general index to monitor the CsPbI3 QD phase transition and finetune the coexistence black-to-yellow phase ratio for niche applications.
RESUMO
A small-angle neutron scattering (SANS) instrument at the China Spallation Neutron Source (CSNS) is an operating instrument for studying structures and inhomogeneities with dimensions ranging from 1 to 100 nm. Preparing multiple samples at once and measuring them sequentially is a common approach in SANS experiments to reduce neutron beamline wastes and increase experimental efficiency. We present the development of an automatic sample changer for the SANS instrument, including system design, thermal simulation, optimization analysis, structure design details, and temperature control test results. It features a two-row construction that can hold 18 samples on each row. The controllable temperature range is -30 to 300 °C. Furthermore, neutron scattering experiments on SANS at CSNS proved that this instrument has good temperature control performance and low background. This automatic sample changer is optimized for usage at SANS and will be offered to other researchers through the user program.
Assuntos
Nêutrons , Síncrotrons , Temperatura , Espalhamento a Baixo Ângulo , Simulação por Computador , Difração de NêutronsRESUMO
HYPOTHESIS: Worm-like micelles are susceptible to heating owing to the fast dynamic exchange of molecules between micelles. Inhibition of such exchange could afford robust worm-like micelles, which is expected to largely improve rheology properties at high temperatures. EXPERIMENTS: A cationic surfactant docosyl(trimethyl)azanium chloride (DCTAC) and a strongly hydrophobic organic counterion 3-hydroxy naphthalene-2-carboxylate (SHNC) were used for the worm-like micelles fabrication. The microstructure was characterized using cryogenic transmission electron microscopy and small-angle neutron scattering, and the interactions between DCTAC and SHNC were characterized using nuclear magnetic resonance spectroscopy. Rheometer was employed to measure the rheological properties of the solution. FINDINGS: SHNC/DCTAC at the molar ration of 1:2 forms ultra-stable worm-like micelles, whose viscosity remain stable at temperature up to 130 °C. SHNC is found to strongly adsorbs on DCTAC micelle with the orientation on the surface of micelle, keeping the naphthalene backbone entire penetration into the palisade layer while both carboxylic and hydroxyl groups protrude out of the micelle. With temperature increasing, this adsorption further strengthens, resulting in the growth contour length and accompanying the enhancement of rheological properties. One SHNC molecule and two DCTAC molecules are speculated to form a stable complex via multiple interactions including hydrophobic, cationic-π, and π-π interactions, which decreases the dynamic exchange of them between micelles. These findings are helpful to understand surfactant aggregates stability and assist the development of novel stable supramolecular nanostructures. Additionally, the excellent thermal stability of this worm-like micellar fluid makes it a potential high-temperature resistant clean fracturing fluid for deep oil reservoirs.
RESUMO
Patterning is attractive for nanofabrication, electron devices, and bioengineering. However, achieving the molecular-scale patterns to meet the demands of these fields is challenging. Here, we propose a bubble-template molecular printing concept by introducing the ultrathin liquid film of bubble walls to confine the self-assembly of molecules and achieve ultrahigh-precision assembly up to 12 nanometers corresponding to the critical point toward the Newton black film limit. The disjoining pressure describing the intermolecular interaction could predict the highest precision effectively. The symmetric molecules exhibit better reconfiguration capacity and smaller preaggregates than the asymmetric ones, which are helpful in stabilizing the drainage of foam films and construct high-precision patterns. Our results confirm the robustness of the bubble template to prepare molecular-scale patterns, verify the criticality of molecular symmetry to obtain the ultimate precision, and predict the application potential of high-precision organic patterns in hierarchical self-assembly and high-sensitivity sensors.
RESUMO
Cellulose nanocrystal (CNC) materials grant abundant possibilities for insulation, however, their extensive application is hindered by the intrinsic tradeoff between their thermal insulating performance and mechanical properties. Here, we show that CNC aerogels with balanced thermal and mechanical performance can be fabricated via a 1 nm metal oxide cluster (phosphotungstic acid, PTA)-assisted unidirectional freeze-drying processing. The as-prepared hybrid aerogels with hierarchical porous structures consisting of layer-by-layer CNC nanosheets enable the decoupling of the strengthening of mechanical properties and the enhancement of thermal insulating capabilities. Within layered structures, the surface-doped nanosized PTA clusters with negative charges behave as dynamic physical cross-linking points, and continuous networks of PTA-doped CNC can be formed via multiple supramolecular interactions (e.g., electrostatic attractions and hydrogen bonds). The afforded stable three-dimensional network structures are able to withstand externally applied forces and large deformations, endowing the aerogels with excellent mechanical performance. Moreover, the inter-layer gap is dominated by nanopores, endowing much lower thermal conductivities along the radial direction in comparison to the axial direction. The addition of PTA clusters also contributes to the obvious enhancements of the fire-retardant properties. Our discoveries provide a facile approach for the design and scalable production of CNC-based insulation materials with optimized mechanical properties and additional fire-retardant properties.
RESUMO
Corneal transplantation is impeded by donor shortages, immune rejection, and ethical reservations. Pre-made cornea prostheses (keratoprostheses) offer a proven option to alleviate these issues. Ideal keratoprostheses must possess optical clarity and mechanical robustness, but also high permeability, processability, and recyclability. Here, it is shown that rationally controlling the extent of arrested phase separation can lead to optimized multiscale structure that reconciles permeability and transparency, a previously conflicting goal by common pore-forming strategies. The process is simply accomplished by hydrothermally treating a dense and transparent hydrophobic association hydrogel. The examination of multiscale structure evolution during hydrothermal treatment reveals that the phase separation with upper miscibility gap evolves to confer time-dependent pore growth due to slow dynamics of polymer-rich phase which is close to vitrification. Such a process can render a combination of multiple desired properties that equal or surpass those of the state-of-the-art keratoprostheses. In vivo tests confirm that the keratoprosthesis can effectively repair corneal perforation and restore a transparent cornea with treatment outcomes akin to that of allo-keratoplasty. The keratoprosthesis is easy to access and convenient to carry, and thus would be an effective temporary substitute for a corneal allograft in emergency conditions.
Assuntos
Córnea , Doenças da Córnea , Humanos , Córnea/cirurgia , Próteses e Implantes , Doenças da Córnea/cirurgia , Hidrogéis/química , Resultado do TratamentoRESUMO
HYPOTHESIS: Self-assembly of peptides is influenced by both molecular structure and external conditions, which dictate the delicate balance of different non-covalent interactions that driving the self-assembling process. The shifting of terminal charge residue is expected to influence the non-covalent interactions and their interplay, thereby affecting the morphologies of self-assemblies. Therefore, the morphology transition can be realized by shifting the position of the terminal charge residue. EXPERIMENTS: The structure transition from thin nanofibers to giant nanotubes is realized by simply shifting the C-terminal lysine of ultrashort Ac-I3K-NH2 to its N-terminus. The morphologies and detailed structure information of the self-assemblies formed by these two peptides are investigated systemically by a combination of different experimental techniques. The effect of terminal residue on the morphologies of the self-assemblies is well presented and the underlying mechanism is revealed. FINDINGS: Giant nanotubes with a bilayer shell structure can be self-assembled by the ultrashort peptide Ac-KI3-NH2 with the lysine residue close to the N-terminal. The Ac-KI3-NH2 dimerization through intermolecular C-terminal H-bonding promotes the formation of a bola-form geometry, which is responsible for the wide nanotube assembly formation. The evolution process of Ac-KI3-NH2 nanotubes follows the "growing width" model. Such a morphological transformation with the terminal lysine shift is applicable to other analogues and thus provides a facile approach for the self-assembly of wide peptide nanotubes, which can expand the library of good template structures for the prediction of peptide nanostructures.