The Mechanism of Markovnikov-Selective Epoxide Hydrogenolysis Catalyzed by Ruthenium PNN and PNP Pincer Complexes.

The homogeneous catalysis of epoxide hydrogenolysis to give alcohols has recently received significant attention. Catalyst systems have been developed for the selective formation of either the Markovnikov (branched) or anti-Markovnikov (linear) alcohol product. Thus far, the reported catalysts exhibiting Markovnikov selectivity all feature the potential for Noyori/Shvo-type bifunctional catalysis, with either a RuH/NH or FeH/OH core structure. The proposed mechanisms of epoxide ring-opening have involved cooperative C-O bond hydrogenolysis involving the metal hydride and the acidic pendant group on the ligand, in analogy to the well-documented mechanism of polar double-bond hydrogenation exhibited by catalysts of this type. In this work, we present a combined computational/experimental study of the mechanism of epoxide hydrogenolysis catalyzed by Noyori-type PNP and PNN complexes of ruthenium. We find that, at least for these ruthenium systems, the previously proposed bifunctional pathway for epoxide ring-opening is energetically inaccessible; instead, the ring-opening proceeds through opposite-side nucleophilic attack of the ruthenium hydride on the epoxide carbon, without the involvement of the ligand N-H group. For both catalyst systems, the rate law and overall barrier predicted by density functional theory (DFT) are consistent with the results from kinetic studies.

Quantifying Variations in Metal-Ligand Cooperative Binding Strength with Cyclic Voltammetry and Redox-Active Ligands.

Metal-ligand cooperativity (MLC), a phenomenon that leverages reactive ligands to promote synergistic reactions with metals, has proven to be a powerful approach to achieving new and unprecedented chemical transformations with metal complexes. While many examples of MLC are known with a wide range of substrates, experimentally quantifying how ligand modifications affect MLC binding strength remains a challenge. Here we describe how cyclic voltammetry (CV) was used to quantify differences in MLC binding strength in a series of square-pyramidal Ru complexes. This method relies on using multifunctional ligands (those capable of both MLC and ligand-centered redox activity) as electrochemical reporters of MLC binding strength. The synthesis and characterization of Ru complexes with three different redox-active tetradentate ligands and two different ancillary phosphines (PPh3 and PCy3) are described. Titration CV studies conducted using BH3·THF with BH3 as a model MLC substrate allowed ΔGMLC to be quantified for each complex. Compared to our base triaryl ligand, increasing π conjugation in the backbone of the redox-active ligand enhanced MLC binding, whereas increasing π conjugation in the flanking groups decreased the MLC binding strength. Structures and spectroscopic data collected for the isolated MLC complexes are also described along with supporting DFT calculations that were used to illuminate electronic factors that likely account for the observed differences in the MLC binding strength. These results demonstrate how redox-active ligands and CV can be used to quantify subtle differences in the MLC binding strength across a series of structurally related complexes with different ligand modifications.

The key role of the latent N-H group in Milstein's catalyst for ester hydrogenation.

We previously demonstrated that Milstein's seminal diethylamino-substituted PNN-pincer-ruthenium catalyst for ester hydrogenation is activated by dehydroalkylation of the pincer ligand, releasing ethane and eventually forming an NHEt-substituted derivative that we proposed is the active catalyst. In this paper, we present a computational and experimental mechanistic study supporting this hypothesis. Our DFT analysis shows that the minimum-energy pathways for hydrogen activation, ester hydrogenolysis, and aldehyde hydrogenation rely on the key involvement of the nascent N-H group. We have isolated and crystallographically characterized two catalytic intermediates, a ruthenium dihydride and a ruthenium hydridoalkoxide, the latter of which is the catalyst resting state. A detailed kinetic study shows that catalytic ester hydrogenation is first-order in ruthenium and hydrogen, shows saturation behavior in ester, and is inhibited by the product alcohol. A global fit of the kinetic data to a simplified model incorporating the hydridoalkoxide and dihydride intermediates and three kinetically relevant transition states showed excellent agreement with the results from DFT.

Influence of Multisite Metal-Ligand Cooperativity on the Redox Activity of Noninnocent N2S2 Ligands.

Metal-ligand cooperativity (MLC) relies on chemically reactive ligands to assist metals with small-molecule binding and activation, and it has facilitated unprecedented examples of catalysis with metal complexes. Despite growing interest in combining ligand-centered chemical and redox reactions for chemical transformations, there are few studies demonstrating how chemically engaging redox active ligands in MLC affects their electrochemical properties when bound to metals. Here we report stepwise changes in the redox activity of model Ru complexes as zero, one, and two BH3 molecules undergo MLC binding with a triaryl noninnocent N2S2 ligand derived from o-phenylenediamine (L1). A similar series of Ru complexes with a diaryl N2S2 ligand with ethylene substituted in place of phenylene (L2) is also described to evaluate the influence of the o-phenylenediamine subunit on redox activity and MLC. Cyclic voltammetry (CV) studies and density functional theory (DFT) calculations show that MLC attenuates ligand-centered redox activity in both series of complexes, but electron transfer is still achieved when only one of the two redox-active sites on the ligands is chemically engaged. The results demonstrate how incorporating more than one multifunctional reactive site could be an effective strategy for maintaining redox noninnocence in ligands that are also chemically reactive and competent for MLC.

The duality of electron localization and covalency in lanthanide and actinide metallocenes.

Previous magnetic, spectroscopic, and theoretical studies of cerocene, Ce(C8H8)2, have provided evidence for non-negligible 4f-electron density on Ce and implied that charge transfer from the ligands occurs as a result of covalent bonding. Strong correlations of the localized 4f-electrons to the delocalized ligand π-system result in emergence of Kondo-like behavior and other quantum chemical phenomena that are rarely observed in molecular systems. In this study, Ce(C8H8)2 is analyzed experimentally using carbon K-edge and cerium M5,4-edge X-ray absorption spectroscopies (XAS), and computationally using configuration interaction (CI) calculations and density functional theory (DFT) as well as time-dependent DFT (TDDFT). Both spectroscopic approaches provide strong evidence for ligand → metal electron transfer as a result of Ce 4f and 5d mixing with the occupied C 2p orbitals of the C8H8 2- ligands. Specifically, the Ce M5,4-edge XAS and CI calculations show that the contribution of the 4f1, or Ce3+, configuration to the ground state of Ce(C8H8)2 is similar to strongly correlated materials such as CeRh3 and significantly larger than observed for other formally Ce4+ compounds including CeO2 and CeCl6 2-. Pre-edge features in the experimental and TDDFT-simulated C K-edge XAS provide unequivocal evidence for C 2p and Ce 4f covalent orbital mixing in the δ-antibonding orbitals of e2u symmetry, which are the unoccupied counterparts to the occupied, ligand-based δ-bonding e2u orbitals. The C K-edge peak intensities, which can be compared directly to the C 2p and Ce 4f orbital mixing coefficients determined by DFT, show that covalency in Ce(C8H8)2 is comparable in magnitude to values reported previously for U(C8H8)2. An intuitive model is presented to show how similar covalent contributions to the ground state can have different impacts on the overall stability of f-element metallocenes.

Dehydroalkylative Activation of CNN- and PNN-Pincer Ruthenium Catalysts for Ester Hydrogenation.

Ruthenium-pincer complexes bearing CNN- and PNN-pincer ligands with diethyl- or diisopropylamino side groups, which have previously been reported to be active precatalysts for ester hydrogenation, undergo dehydroalkylation on heating in the presence of tricyclohexylphosphine to release ethane or propane, giving five-coordinate ruthenium(0) complexes containing a nascent imine functional group. Ethane or propane is also released under the conditions of catalytic ester hydrogenation, and time-course studies show that this release is concomitant with the onset of catalysis. A new PNN-pincer ruthenium(0)-imine complex is a highly active catalyst for ester hydrogenation at room temperature, giving up to 15 500 turnovers with no added base. This complex was shown to react reversibly at room temperature with two equivalents of hydrogen to give a ruthenium(II)-dihydride complex, where the imine functionality has been hydrogenated to give a protic amine side group. These observations have potentially broad implications for the identities of catalytic intermediates in ester hydrogenation and related transformations.

Validating the Biphilic Hypothesis of Nontrigonal Phosphorus(III) Compounds.

Constraining σ3 -P compounds in nontrigonal, entatic geometries has proven to be an effective strategy for promoting biphilic oxidative addition reactions more typical of transition metals. Although qualitative descriptions of the impact of structure and symmetry on σ3 -P complexes have been proposed, electronic structure variations responsible for biphilic reactivity have yet to be elucidated experimentally. Reported here are P K-edge XANES data and complementary TDDFT calculations for a series of structurally modified P(N)3 complexes that both validate and quantify electronic structure variations proposed to give rise to biphilic reactions at phosphorus. These data are presented alongside experimentally referenced electronic structure calculations that reveal nontrigonal structures predicted to further enhance biphilic reactivity in σ3 -P ligands and catalysts.

Energy-Degeneracy-Driven Covalency in Actinide Bonding.

Evaluating the nature of chemical bonding for actinide elements represents one of the most important and long-standing problems in actinide science. We directly address this challenge and contribute a Cl K-edge X-ray absorption spectroscopy and relativistic density functional theory study that quantitatively evaluates An-Cl covalency in AnCl62- (AnIV = Th, U, Np, Pu). The results showed significant mixing between Cl 3p- and AnIV 5f- and 6d-orbitals (t1u*/t2u* and t2 g*/eg *), with the 6d-orbitals showing more pronounced covalent bonding than the 5f-orbitals. Moving from Th to U, Np, and Pu markedly changed the amount of M-Cl orbital mixing, such that AnIV 6d - and Cl 3p-mixing decreased and metal 5f - and Cl 3p-orbital mixing increased across this series.

Plutonium coordination and redox chemistry with the CyMe4-BTPhen polydentate N-donor extractant ligand.

Complexation of Pu(iv) with the actinide extractant CyMe4-BTPhen (2,9-bis(5,5,8,8-tetramethyl-5,6,7,8-tetrahydro-1,2,4-benzotriazin-3-yl)-1,10-phenanthroline) was followed by vis-NIR spectroscopy in acetonitrile solution. The solid-state structure of the crystallized product suggests that Pu(iv) is reduced to Pu(iii) upon complexation. Analysis by DFT modeling is consistent with metal-based rather than ligand-based reduction.

Measurement of Diphosphine σ-Donor and π-Acceptor Properties in d0 Titanium Complexes Using Ligand K-Edge XAS and TDDFT.

Diphosphines are highly versatile ancillary ligands in coordination chemistry and catalysis because their structures and donor-acceptor properties can vary widely depending on the substituents attached to phosphorus. Experimental and theoretical methods have been developed to quantify differences in phosphine and diphosphine ligand field strength, but experimentally measuring individual σ-donor and π-acceptor contributions to metal-phosphorus bonding remains a formidable challenge. Here we report P and Cl K-edge X-ray absorption spectroscopy (XAS), density functional theory (DFT), and time-dependent density functional theory (TDDFT) studies of a series of [Ph2P(CH2) nPPh2]TiCl4 complexes, where n = 1, 2, or 3. The d0 metal complexes (Ti4+) revealed both P 1s → Ti-P π and P 1s → Ti-P σ* transitions in the P K-edge XAS spectra, which allowed spectral changes associated with Ti-P σ-bonding and π-backbonding to be evaluated as a function of diphosphine alkane length. DFT and TDDFT calculations were used to assign and quantify changes in Ti-P σ-bonding and π-backbonding. The calculated results for [Ph2P(CH2)2PPh2]TiCl4 were subsequently compared to electronic structure calculations and simulated spectra for [R2P(CH2)2PR2]TiCl4, where R = cyclohexyl or CF3, to evaluate spectral changes as a function of diphosphine ligand field strength. Collectively, our results demonstrate how P K-edge XAS can be used to experimentally measure M-P π-backbonding with a d0 metal and corroborate earlier studies showing that relative changes in covalent M-P σ bonding do not depend solely on changes in diphosphine bite angle.

Solid energy calibration standards for P K-edge XANES: electronic structure analysis of PPh4Br.

P K-edge X-ray absorption near-edge structure (XANES) spectroscopy is a powerful method for analyzing the electronic structure of organic and inorganic phosphorus compounds. Like all XANES experiments, P K-edge XANES requires well defined and readily accessible calibration standards for energy referencing so that spectra collected at different beamlines or under different conditions can be compared. This is especially true for ligand K-edge X-ray absorption spectroscopy, which has well established energy calibration standards for Cl (Cs2CuCl4) and S (Na2S2O3·5H2O), but not neighboring P. This paper presents a review of common P K-edge XANES energy calibration standards and analysis of PPh4Br as a potential alternative. The P K-edge XANES region of commercially available PPh4Br revealed a single, highly resolved pre-edge feature with a maximum at 2146.96 eV. PPh4Br also showed no evidence of photodecomposition when repeatedly scanned over the course of several days. In contrast, we found that PPh3 rapidly decomposes under identical conditions. Density functional theory calculations performed on PPh3 and PPh4+ revealed large differences in the molecular orbital energies that were ascribed to differences in the phosphorus oxidation state (III versus V) and molecular charge (neutral versus +1). Time-dependent density functional theory calculations corroborated the experimental data and allowed the spectral features to be assigned. The first pre-edge feature in the P K-edge XANES spectrum of PPh4Br was assigned to P 1s → P-C π* transitions, whereas those at higher energy were P 1s → P-C σ*. Overall, the analysis suggests that PPh4Br is an excellent alternative to other solid energy calibration standards commonly used in P K-edge XANES experiments.

Sinter-Resistant and Highly Active Sub-5 nm Bimetallic Au-Cu Nanoparticle Catalysts Encapsulated in Silica for High-Temperature Carbon Monoxide Oxidation.

A novel gold-copper-based silica-encapsulated mixed metal oxide (MMO) core-shell catalyst-with sub-5 nm MMO particles-was successfully synthesized via a reverse micelle process. The SiO2-encapsulated MMO catalyst was reduced under hydrogen flow to produce an Au-Cu@SiO2 catalyst. X-ray diffraction and X-ray photoelectron spectroscopy characterization confirmed the presence of Au-Cu nanocomposites in the catalyst, while transmission electron microscopy characterization revealed the core-shell structure of the catalyst with the presence of sub-5 nm Au-Cu nanoparticle cores inside SiO2 shells. Brunauer-Emmett-Teller surface characterization identified that the catalyst is porous and bimodal in nature. The effects of promoter metal ion, catalyst pretreatment (calcination), and the presence of CO2 in the feed stream on carbon monoxide (CO) oxidation over the Au-Cu@SiO2 catalyst were examined in the temperature range of 50-400 °C. A catalyst stability test was performed at 300 °C by conducting a CO oxidation reaction for 116 h on stream. The catalyst exhibited excellent efficacy for CO oxidation, with ∼100% conversion to CO2 achieved at 400 °C. While the presence of Cu enhanced the CO conversion at low to intermediate temperatures (50-300 °C), silica encapsulation of the Au-Cu nanocomposites facilitated remarkable stability of the catalyst. The activity of the Au-Cu@SiO2 catalyst is suitable for its application in automotive after-treatment devices, especially in low-temperature combustion engine exhausts.

Quantitative Evidence for Lanthanide-Oxygen Orbital Mixing in CeO2, PrO2, and TbO2.

Understanding the nature of covalent (band-like) vs ionic (atomic-like) electrons in metal oxides continues to be at the forefront of research in the physical sciences. In particular, the development of a coherent and quantitative model of bonding and electronic structure for the lanthanide dioxides, LnO2 (Ln = Ce, Pr, and Tb), has remained a considerable challenge for both experiment and theory. Herein, relative changes in mixing between the O 2p orbitals and the Ln 4f and 5d orbitals in LnO2 are evaluated quantitatively using O K-edge X-ray absorption spectroscopy (XAS) obtained with a scanning transmission X-ray microscope and density functional theory (DFT) calculations. For each LnO2, the results reveal significant amounts of Ln 5d and O 2p mixing in the orbitals of t2g (σ-bonding) and eg (π-bonding) symmetry. The remarkable agreement between experiment and theory also shows that significant mixing with the O 2p orbitals occurs in a band derived from the 4f orbitals of a2u symmetry (σ-bonding) for each compound. However, a large increase in orbital mixing is observed for PrO2 that is ascribed to a unique interaction derived from the 4f orbitals of t1u symmetry (σ- and π-bonding). O K-edge XAS and DFT results are compared with complementary L3-edge and M5,4-edge XAS measurements and configuration interaction calculations, which shows that each spectroscopic approach provides evidence for ground state O 2p and Ln 4f orbital mixing despite inducing very different core-hole potentials in the final state.

Mechanistic examination of aerobic Pt oxidation: insertion of molecular oxygen into Pt-H bonds through a radical chain mechanism.

DFT calculations were performed in an effort to evaluate the mechanism of O2 insertion into the Pt-H bond of Tp(Me2)Pt(IV)Me2H catalyzed by AIBN or light. Results are consistent with a radical chain mechanism involving H˙ loss to form a Pt(III)˙ species followed by addition of O2 to form Pt(III)OO˙. Subsequent radical propagation involving this Pt(III)OO˙ species and an additional equivalent of the Pt(IV) starting material result in the formation of the observed Pt(IV)OOH and regeneration of the Pt(III)˙. In addition examination of the reaction between AIBN and the Pt(IV) hydroperoxo product demonstrates that radical initiation reactions involving the product occur with a lower barrier than with the initial starting material supporting the idea of autoacceleration in this reaction. Other possible mechanisms were examined in an effort to understand the limited reactivity reported in the absence of light or radical initiators. TDDFT calculations were performed in an effort to understand the reported parallel photo-induced reaction. These calculations found the reactant to be transparent in the relevant light range. An experimental UV-Vis spectrum was obtained and is in agreement with the calculations.

Correction: Ligand K-edge XAS, DFT, and TDDFT analysis of pincer linker variations in Rh(i) PNP complexes: reactivity insights from electronic structure.

Correction for 'Ligand K-edge XAS, DFT, and TDDFT analysis of pincer linker variations in Rh(i) PNP complexes: reactivity insights from electronic structure' by Jason M. Keith, Scott R. Daly, et al., Dalton Trans., 2016, 45, 9774-9785.

Ligand K-edge XAS, DFT, and TDDFT analysis of pincer linker variations in Rh(i) PNP complexes: reactivity insights from electronic structure.

Here we report P K-edge, Cl K-edge, and Rh L3-edge X-ray absorption spectroscopy (XAS) data for Rh[C5H3N-2,6-(XP(t)Bu2)2]Cl, where X = O ((tBu)PONOP; ) or CH2 ((tBu)PNP; ). Solid-state XAS data for and were compared to density functional theory (DFT) and time-dependent density functional theory (TDDFT) calculations to identify how changing the PNP pincer linker from O to CH2 affected electronic structure and bonding at Rh(i). Pronounced differences in XAS peak intensities and energies were observed. The P K-edge XAS data revealed a large increase in Rh 4dx(2)-y(2) and P 3p orbital-mixing (Rh-P σ*) in compared to , and pronounced transition energy variations reflected marked differences in orbital energies and compositions. By comparison, the Cl K-edge XAS data revealed only subtle differences in Rh-Cl covalency, although larger splitting between the Rh-Cl π* and σ* transitions was observed in . Analysis of the occupied MOs from DFT (HOMO, HOMO-1, HOMO-2, and HOMO-3) and comparison to the unoccupied MOs involved in XAS revealed a relatively uniform energy increase (ca. 0.3-0.5 eV) for all five 4d-derived molecular orbitals in Rh((tBu)PNP)Cl () compared to Rh((tBu)PONOP)Cl (). The energy shift was relatively invariant with respect to differences in orbital symmetry, bonding type (σ or π), and orbital mixing, which suggested that the increase could be attributed to electrostatic effects. The change in d-orbital energies are consistent with known reactivity differences of Rh((tBu)PONOP)(+) and Rh((tBu)PNP)(+) towards CO, H2, and CH2Cl2, and are explained here by considering how d-orbital energies affect covalent L → M σ bonding and M → L π backbonding.

Impact of Coordination Geometry, Bite Angle, and Trans Influence on Metal-Ligand Covalency in Phenyl-Substituted Phosphine Complexes of Ni and Pd.

Despite the long-standing use of phosphine and diphosphine ligands in coordination chemistry and catalysis, questions remain as to their effects on metal-ligand bonding in transition metal complexes. Here we report ligand K-edge XAS, DFT, and TDDFT studies aimed at quantifying the impact of coordination geometry, diphosphine bite angle, and phosphine trans influence on covalency in M-P and M-Cl bonds. A series of four-coordinate NiCl2 and PdCl2 complexes containing PPh3 or Ph2P(CH2)nPPh2, where n = 1 (dppm), 2 (dppe), 3 (dppp), and 4 (dppb), was analyzed. The XAS data revealed that changing the coordination geometry from tetrahedral in Ni(PPh3)2Cl2 (1) to square planar in Ni(dppe)Cl2 (2) more than doubles the intensity of pre-edge features assigned to Ni-P and Ni-Cl 1s → σ* transitions. By way of comparison, varying the diphosphine in Pd(dppm)Cl2 (4), Pd(dppp)Cl2 (6), and Pd(dppb)Cl2 (7) yielded Pd-P 1s → σ* transitions with identical intensities, but a 10% increase was observed in the P K-edge XAS spectrum of Pd(dppe)Cl2 (5). A similar observation was made when comparing Ni(dppe)Cl2 (2) to Ni(dppp)Cl2 (3), and DFT and TDDFT calculations corroborated XAS results obtained for both series. Comparison of the spectroscopic and theoretical results to the diphosphine structures revealed that changes in M-P covalency were not correlated to changes in bite angles or coordination geometry. As a final measure, P and Cl K-edge XAS data were collected on trans-Pd(PPh3)2Cl2 (8) for comparison to the cis diphosphine complex Pd(dppe)Cl2 (5). Consistent with phosphine's stronger trans influence compared to chloride, a 35% decrease in the intensity of the Pd-P 1s → σ* pre-edge feature and a complementary 34% increase in Pd-Cl 1s → σ* feature was observed for 8 (trans) compared to 5 (cis). Overall, the results reveal how coordination geometry, ligand arrangement, and diphosphine structure affect covalent metal-phosphorus and metal-chloride bonding in these late transition metal complexes.

Covalency in lanthanides. An X-ray absorption spectroscopy and density functional theory study of LnCl6(x-) (x = 3, 2).

Covalency in Ln-Cl bonds of Oh-LnCl6(x-) (x = 3 for Ln = Ce(III), Nd(III), Sm(III), Eu(III), Gd(III); x = 2 for Ln = Ce(IV)) anions has been investigated, primarily using Cl K-edge X-ray absorption spectroscopy (XAS) and time-dependent density functional theory (TDDFT); however, Ce L3,2-edge and M5,4-edge XAS were also used to characterize CeCl6(x-) (x = 2, 3). The M5,4-edge XAS spectra were modeled using configuration interaction calculations. The results were evaluated as a function of (1) the lanthanide (Ln) metal identity, which was varied across the series from Ce to Gd, and (2) the Ln oxidation state (when practical, i.e., formally Ce(III) and Ce(IV)). Pronounced mixing between the Cl 3p- and Ln 5d-orbitals (t2g* and eg*) was observed. Experimental results indicated that Ln 5d-orbital mixing decreased when moving across the lanthanide series. In contrast, oxidizing Ce(III) to Ce(IV) had little effect on Cl 3p and Ce 5d-orbital mixing. For LnCl6(3-) (formally Ln(III)), the 4f-orbitals participated only marginally in covalent bonding, which was consistent with historical descriptions. Surprisingly, there was a marked increase in Cl 3p- and Ce(IV) 4f-orbital mixing (t1u* + t2u*) in CeCl6(2-). This unexpected 4f- and 5d-orbital participation in covalent bonding is presented in the context of recent studies on both tetravalent transition metal and actinide hexahalides, MCl6(2-) (M = Ti, Zr, Hf, U).

Using solution- and solid-state S K-edge X-ray absorption spectroscopy with density functional theory to evaluate M-S bonding for MS4(2-) (M = Cr, Mo, W) dianions.

Herein, we have evaluated relative changes in M-S electronic structure and orbital mixing in Group 6 MS4(2-) dianions using solid- and solution-phase S K-edge X-ray absorption spectroscopy (XAS; M = Mo, W), as well as density functional theory (DFT; M = Cr, Mo, W) and time-dependent density functional theory (TDDFT) calculations. To facilitate comparison with solution measurements (conducted in acetonitrile), theoretical models included gas-phase calculations as well as those that incorporated an acetonitrile dielectric, the latter of which provided better agreement with experiment. Two pre-edge features arising from S 1s → e* and t electron excitations were observed in the S K-edge XAS spectra and were reasonably assigned as (1)A1 → (1)T2 transitions. For MoS4(2-), both solution-phase pre-edge peak intensities were consistent with results from the solid-state spectra. For WS4(2-), solution- and solid-state pre-edge peak intensities for transitions involving e* were equivalent, while transitions involving the t orbitals were less intense in solution. Experimental and computational results have been presented in comparison to recent analyses of MO4(2-) dianions, which allowed M-S and M-O orbital mixing to be evaluated as the principle quantum number (n) for the metal valence d orbitals increased (3d, 4d, 5d). Overall, the M-E (E = O, S) analyses revealed distinct trends in orbital mixing. For example, as the Group 6 triad was descended, e* (π*) orbital mixing remained constant in the M-S bonds, but increased appreciably for M-O interactions. For the t orbitals (σ* + π*), mixing decreased slightly for M-S bonding and increased only slightly for the M-O interactions. These results suggested that the metal and ligand valence orbital energies and radial extensions delicately influenced the orbital compositions for isoelectronic ME4(2-) (E = O, S) dianions.