RESUMO
This publisher's note contains corrections to Opt. Lett.48, 4825 (2023)10.1364/OL.500587.
RESUMO
Long-range vibration sensing is an important tool for real-time structural health monitoring. A new, to the best of our knowledge, design of a distributed fiber-optic vibration sensor is introduced and experimentally demonstrated in this study. The proposed system utilizes the transmission of light in the forward direction for sensing, and a self-interference method for laser source simplification. To extract vibration information from phase modulation of light, two Mach-Zehnder interferometers (MZIs) are employed with a 3 × 3 coupler-based differential cross multiplication algorithm for phase calculation. A folded double-ended detection configuration allows the time-of-flight difference via cross correlation (CC) to provide vibration positioning. Experimental results demonstrate a sensing range of up to â¼80â km without optical amplification, accompanied by a position accuracy of 336 m.
RESUMO
The growing landscape of laser applications in â¼ 2 µm spectral region leads to the development of novel transparent media that provide low attenuation solutions for high power laser applications. This includes investigating glassy media such as heavy metal oxides (e.g. tellurite and germanate), fluoride and chalcogenides as an alternative to the most efficient and widely utilized silica glass. This review article discusses the potential of a heavy metal oxide lead-germanate glass (GeO2-PbO-Ga2O3-Na2O) for â¼ 2.1 µm laser applications, with a focus on our contribution to the field. Firstly, a comparative study of commercially available silicates and fluorides with germanate glass is presented to reveal germanate to be a favorable material for 2.1 µm laser applications. Secondly, as our contribution to the field, we present the development of the first â¼ 2.1 µm small cavity single frequency laser action in a Ho3+ doped GPGN glass that verifies its capability for â¼ 2 µm laser applications and beyond.
RESUMO
To support the growing landscape of near to mid-IR laser applications we demonstrate a range of low propagation loss femtosecond laser (FSL) written waveguides (WGs) that have achieved guided-mode laser operation in a rare earth (RE) doped lead-germanate glass. The WGs are fabricated in both the athermal and thermal FSL writing regimes using three different pulse repetition frequencies (PRF): 100 kHz (athermal); 1 MHz; and 5 MHz (thermal). The lasing capability of Yb3+ doped lead-germanate waveguides is verified in the near-IR. The refractive index contrast (∆n) for 100 kHz WGs is ~ 1 × 10-4, while for 5 MHz, ∆n increases to ~ 5 × 10-4. The WGs in the thermal regime are less effected by self-focusing and are larger in dimensions with reduced propagation losses. For the 1 MHz repetition rate thermal writing regime we report a low propagation loss WG (0.2 dB/cm) and demonstrate laser operation with slope efficiencies of up to ~ 28%.