Establishment of the mid-sagittal reference plane for three-dimensional assessment of facial asymmetry: a systematic review : Establishment of the mid-sagittal reference plane: a systematic review.

OBJECTIVE: To systematically review the literature for mid-sagittal plane establishment approaches to identify the most effective method for constructing the mid-sagittal plane for the evaluation of facial asymmetry. MATERIALS AND METHODS: Six electronic databases (PubMed, Medline (via Ovid), EMBASE (via Ovid), Cochrane Library, Web of Science, and Scopus) and grey literature were searched for the studies that computed the mid-sagittal reference plane three-dimensionally, using a combination of MeSH terms and keywords. The methodological quality and the level of evidence for the included studies were analyzed using QUADAS-2 and GRADE, respectively. RESULTS: The preliminary search yielded 6746 records, of which 42 articles that met the predefined inclusion criteria were included in the final analysis. All the included articles reported the construction of the mid-sagittal reference plane (MSP) using varied methods. The risk of bias and concerns regarding the applicability of the included studies were judged to be 'low'. The level of evidence was determined to be 'low' for the effectiveness of the technique and 'moderate' for the ease of clinical applicability. CONCLUSION: Despite methodological heterogeneity, this review substantiates the comparable efficacy of cephalometric and morphometric MSP construction methods. A fully automated morphometric MSP holds promise as a viable option for routine clinical use. Nevertheless, future prospective studies with an emphasis on the impact, accuracy, and clinical applicability of MSP construction techniques in cases of facial asymmetry are required. CLINICAL RELEVANCE: The present review will assist clinicians in selecting the most suitable method for MSP construction, leading to improved treatment planning and ultimately more favorable treatment outcomes.

Three-dimensional assessment of facial asymmetry in class III subjects, part 2: evaluating asymmetry index and asymmetry scores.

OBJECTIVES: To evaluate the outcomes of corrective surgical treatment for craniofacial asymmetry using four different methods with the aim of developing the best technique for craniofacial asymmetry assessment. MATERIALS AND METHODS: CBCT images of twenty-one class III subjects with surgically corrected craniofacial asymmetry and twenty-one matched controls were analyzed. Twenty-seven hard tissue landmarks were used to quantify asymmetry using the following methodologies: the asymmetry index (AI), asymmetry scores based on the clinically derived midline (CM), Procrustes analysis (PA), and modified Procrustes analysis (MPA). RESULTS: Modified Procrustes analysis successfully identified pre-operative asymmetry and revealed severe asymmetry at the mandibular regions compared to controls, which was comparable to the asymmetry index and clinically derived midline methods, while Procrustes analysis masked the asymmetric characteristics. Likewise, when comparing the post-surgical outcomes, modified Procrustes analysis not only efficiently determined the changes evidencing decrease in facial asymmetry but also revealed significant residual asymmetry in the mandible, which was congruent with the asymmetry index and clinically derived midline methods but contradictory to the results shown by Procrustes analysis. CONCLUSIONS: In terms of quantifying cranio-facial asymmetry, modified Procrustes analysis has evidenced to produce promising results that were comparable to the asymmetry index and the clinically derived midline, making it a more viable option for craniofacial asymmetry assessment. CLINICAL RELEVANCE: Modified Procrustes analysis is proficient in evaluating cranio-facial asymmetry with more valid clinical representation and has potential applications in assessing asymmetry in a wide spectrum of patients, including syndromic patients.

The reliability of analytical reference lines for determining esthetically pleasing lip position: An assessment of consistency, sensitivity, and specificity.

INTRODUCTION: This study aimed to identify a simple yet reliable soft-tissue parameter for the clinical determination of esthetic lip position by investigating the most consistent reference lines and assessing their sensitivity and specificity. METHODS: A total of 5745 records from Chinese patients aged >18 years were screened. In part I of the study, lateral view photographs of 96 subjects (33 males, 63 females) with esthetic facial profiles were selected. The profile esthetics of each photograph was first scored by 52 dental students, followed by 97 laypeople on a 5-point attractiveness scale. For the top 25% of photographs with the highest score for each sex (8 males, 16 females), the consistency of 6 commonly used reference lines were assessed to determine the esthetic lip position. In part II of the study, lip positions relative to Steiner's (S) and Ricketts' (E) lines in the profile photographs of 86 patients (43 males, 43 females) deemed to have an esthetically unpleasing profile were compared with those in 86 Chinese movie star idols (43 males, 43 females). RESULTS: In part I of the study, the S, E, and Burstone's (B) lines exhibited the lowest standard deviations for the upper and lower lips. B line was excluded from further analysis because of its higher mean absolute values, and S and E lines were used for the subjective assessment in part II of the study. In part II, the S line showed a sensitivity of 86.0% and 86.0% and a specificity of 81.4% and 83.7% for males and females, respectively. In contrast, the E line presented a sensitivity of 88.4% and 93.0% and a specificity of 79.1% and 74.4% for males and females, respectively. CONCLUSIONS: S, E, and B lines were the most consistent soft-tissue parameters among both sexes; however, because of the smaller absolute values, the S line would be more convenient among the 3 for a quick clinical assessment of lip position. Moreover, the performance of both S and E lines was similar among both sexes, which supports using these lines in assessing the esthetic lip position.

Do parents of adolescent patients undergoing fixed appliance treatment recall more information using written material or an animated video? A randomized controlled trial.

Objectives: This "2-arm parallel" trial investigated the recall of information pertinent to obtaining informed consent of parents of orthodontic patients using; either written material and verbal support or an animation. Materials and methods: Parents of patients, aged 12-18 years, about to undergo fixed applaince treatment, were randomized to either receive information by leaflet or by watching an animation. The parents were asked a series of open-ended questions immediately and one year later. The outcome measure was the total median questionnaire score immediately (T0) and one year later (T1). A Mann Whitney U test was performed to test for differences between T0 and T1. Results: 31 parents were randomized into the leaflet group and 33 in to the animation group. The median leaflet group score was 81 (IQR = 27) at the time of consent (T0) and 87 (IQR = 29) a year later (T1), compared to a median score of 76 (IQR = 23) for the animation group at T0 and 87 (IQR = 32) at T1. Statistically, there was no difference in the questionnaire score at (T0) (p = 0.567) and at (T1) (p = 0.522). The average time spent with the clinician in the leaflet group was an additional 9 min in the animation group. Conclusion: The use of a leaflet and verbal information or an animation are equivalent in providing information to the parents of orthodontic patients. The use of an animation reduces the clinical time needed to deliver the information.

The validity of using profile predictions for class III patients planned for bimaxillary orthognathic surgery.

This study assessed whether preoperative class III patients could recreate their facial difference based on a profile photograph. Twenty class III pre-surgery bimaxillary orthognathic patients used CASSOS (SoftEnable Technology Ltd.) to manipulate a distorted soft tissue image of them until they felt it resembled their current soft tissue profile. Patients were able to move their upper lip and lower chin backward and forwards, as well as the lower chin up and down. Differences in the mean absolute distance between the patient-perceived position of the upper lip (Labrale superious) and chin (Pogonion) and the actual position of their upper lip and chin were measured on two occasions. Intra-patient reproducibility was found to be excellent (ICC 0.93 to 0.98). All differences were statistically significantly greater than 3mm, and would be clinically significant. Patients were better at re-creating their AP chin position rather than their AP upper lip and vertical chin positions. Approximately half of patients undergoing surgical correction of their class III skeletal pattern were unable to correctly identify their pre-surgical facial profile. Given the lack of awareness of their profile, this questions the validity of using profile planning for informed consent.

Three-dimensional assessment of facial asymmetry in Class III subjects. Part 1: a retrospective study evaluating postsurgical outcomes.

OBJECTIVE: The present study aimed to determine the site and severity of maxillomandibular asymmetry before and after orthognathic surgery in asymmetric patients. MATERIALS AND METHODS: Presurgery and postsurgery cone beam computed tomography (CBCT) data of 21 facial asymmetry patients (7 males and 14 females, mean age: 23.0 ± 3.36 years) with soft tissue chin deviation ≥ 3 mm who had undergone bimaxillary surgery were evaluated. Seven midline and twenty bilateral hard tissue landmarks were identified for the evaluation of facial asymmetry and outcomes were assessed against age- and gender-matched control subjects. RESULTS: In the asymmetry group, bilateral landmarks exhibited significant deviation in the mandible and midface regions. Before surgery, asymmetry was more severe at the mandibular midline and sites close to it, in the asymmetry group. Bimaxillary surgery proved to be highly effective, with a significant correction of the menton to a clinically normal value (2.90 mm, p < 0.001). After surgery, significant residual asymmetry was observed at the mental foramen (p = 0.001) in the R-L direction. Moreover, significant asymmetry persisted at the sigmoid notch (p = 0.001) in the S-I direction. CONCLUSIONS: Mandibular midline landmarks and chin peripheral regions contribute significantly to overall facial asymmetry characteristics. Despite significant correction after bimaxillary surgery, asymmetry persisted at several sites, thereby requiring secondary correction. Comprehensive 3D presurgical planning is central for asymmetry correction in a single surgery. CLINICAL RELEVANCE: The present study specifies the location of residual asymmetry sites and advocates the correction of those sites during initial surgery.

A feasible route for the design and manufacture of customised respiratory protection through digital facial capture.

The World Health Organisation has called for a 40% increase in personal protective equipment manufacturing worldwide, recognising that frontline workers need effective protection during the COVID-19 pandemic. Current devices suffer from high fit-failure rates leaving significant proportions of users exposed to risk of viral infection. Driven by non-contact, portable, and widely available 3D scanning technologies, a workflow is presented whereby a user's face is rapidly categorised using relevant facial parameters. Device design is then directed down either a semi-customised or fully-customised route. Semi-customised designs use the extracted eye-to-chin distance to categorise users in to pre-determined size brackets established via a cohort of 200 participants encompassing 87.5% of the cohort. The user's nasal profile is approximated to a Gaussian curve to further refine the selection in to one of three subsets. Flexible silicone provides the facial interface accommodating minor mismatches between true nasal profile and the approximation, maintaining a good seal in this challenging region. Critically, users with outlying facial parameters are flagged for the fully-customised route whereby the silicone interface is mapped to 3D scan data. These two approaches allow for large scale manufacture of a limited number of design variations, currently nine through the semi-customised approach, whilst ensuring effective device fit. Furthermore, labour-intensive fully-customised designs are targeted as those users who will most greatly benefit. By encompassing both approaches, the presented workflow balances manufacturing scale-up feasibility with the diverse range of users to provide well-fitting devices as widely as possible. Novel flow visualisation on a model face is presented alongside qualitative fit-testing of prototype devices to support the workflow methodology.

Dynamic effect of three locking plates fixated to humeral fracture based on multibody musculoskeletal model.

OBJECTIVE: This study attempts to analyse the biomechanical effect of internal fixation (plated in parallel or plated vertically) on the basis of distal humeral fractures on musculoskeletal multibody dynamics using AnyBody in Finite Element Method. METHOD: Humeral 3D models were reconstructed by MIMICS after volunteers' CT image input in *.dicom format, and processed by Geomagic Studio for surfaces, while locking plates and screws were then designed by Pro-E. A humeral model of T-type fracture was created and assembled in Hypermesh, to integrate fixtures (e.g., MPL/PML/ML), to grid the mesh and then assign materials. A musculoskeletal model of the upper limb was established by AnyBody to simulate elbow flexion and extension. They were finally imported to Abaqus for boundary conditions and dynamic analysis. RESULT: In terms of Von Mises stress, its maximum increased and then decreased gradually during the joint motion, but p > 0.05 in SPSS suggests no significant difference for all three fixtures. In terms of displacement, when the elbow was at 90°, each motional pattern reached its peak as follows: ML180° = 0.28 mm, MPL90° = 0.49 mm & PML90° = 0.54 mm during flexion; ML180° = 0.073 mm, MPL90° = 0.10 mm & PML90° = 0.12 mm during extension. p < 0.05 suggests a significant difference for the displacements of all three fixations. p = 0.007 < 0.01667 suggests the significant difference between the two fixations, for example, PML90° and ML180°, indicating that the peak displacement of ML180° is less than that of PML90°. CONCLUSION: After generally analysed in musculoskeletal dynamics, the biomechanical property of the fixtures was presented as follows: the displacement of the parallel plate was less than that of the vertical, and the parallel plate may optimise the clinical reduction anatomically.

Anthropometric accuracy of three-dimensional average faces compared to conventional facial measurements.

This study aimed to evaluate and compare the accuracy of average faces constructed by different methods. Original three-dimensional facial images of 26 adults in Chinese ethnicity were imported into Di3DView and MorphAnalyser for image processing. Six average faces (Ave_D15, Ave_D24, Ave_MG15, Ave_MG24, Ave_MO15, Ave_MO24) were constructed using "surface-based registration" method with different number of landmarks and template meshes. Topographic analysis was performed, and the accuracy of six average faces was assessed by linear and angular parameters in correspondence with arithmetic means calculated from individual original images. Among the six average faces constructed by the two systems, Ave_MG15 had the highest accuracy in comparison with the conventional method, while Ave_D15 had the least accuracy. Other average faces were comparable regarding the number of discrepant parameters with clinical significance. However, marginal and non-registered areas were the most inaccurate regions using Di3DView. For MorphAnalyser, the type of template mesh had an effect on the accuracy of the final 3D average face, but additional landmarks did not improve the accuracy. This study highlights the importance of validating software packages and determining the degree of accuracy, as well as the variables which may affect the result.

A comparative assessment of information recall and comprehension between conventional leaflets and an animated video in adolescent patients undergoing fixed orthodontic treatment: A single-center, randomized controlled trial.

INTRODUCTION: The objective of this 2-arm parallel trial was to investigate the recall and comprehension of the information of orthodontic patients undergoing fixed orthodontic treatment using either the verbal explanation supported with the British Orthodontic Society (BOS) leaflet or 3-dimensional (3D) animated content. METHODS: Patients aged 12-18 years, with no relevant medical history or learning and reading difficulties, who were to undergo orthodontic treatment, were randomized to receive information about fixed orthodontic treatment, using either verbal explanation supported with the BOS leaflet or 3D animated content on the basis of the BOS leaflet. Randomization was performed by block randomization; block size of 4 was used, from which 6 blocks with 6 different sequences (AABB, ABBA, ABAB, BBAA, BAAB, BABA). The blinded author asked patients a series of open-ended questions. The primary outcome measure was the total score of the questions. An independent 2 sample t test was conducted to determine if there was a statistical difference in total questions score between the conventional method (verbal and leaflet) and the 3D animation at the time of consent taking (T0) and again 1 year later (T1). The secondary outcome measure was the time spent by the clinician delivering the information to the patient. RESULTS: Thirty-two patients were randomized into each group. After 1 year, 1 patient was lost in each group. At the time of consent, the conventional group scored 79.1 ± 18.4 compared with 76.4 ± 12.8 for the 3D animation group with no statistically significant difference (95% confidence interval, -11.0 to 5.3), (P = 0.492). One year later, again, there was no statistically significant difference (P = 0.639) between the conventional group (75.6 ± 12.3) and the 3D animation group (74.4 ± 9.0) (95% confidence interval, -7.0 to 4.4). The average exposure time to the educational intervention in the conventional group was 8.5 minutes more than the 3D animation group. CONCLUSIONS: The use of 3D animation or verbal and leaflet information is relatively equivalent in transferring knowledge to the orthodontic patient. The use of a 3D animated video reduces the clinician time needed in the clinic to deliver information to the patients and also allows multiple views and better suits the younger generation. Patients undergoing short- or long-term orthodontic treatment do not recall root damage as a risk of orthodontic treatment, which requires special attention from the orthodontist to reinforce this information. REGISTRATION: This trial was not registered. PROTOCOL: The protocol was not published before trial commencement.

A study of smile aesthetic perception among dental professionals, patients and parents towards impacted maxillary canine treatment options.

OBJECTIVE: To evaluate the smile aesthetics of the different treatment options for impacted maxillary canines as perceived by orthodontists, dentists, patients and parents. DESIGN: Cross-sectional survey. SETTING: Four rater groups were selected to complete the questionnaire consisting of an orthodontist group, a general dental practitioner group, a patient group consisting of patients aged 11-18 years who were considered to be 'Gillick competent' and a parent group consisting of parents/guardians who accompanied the patients to their orthodontic appointments. METHOD: Four digitally manipulated images were created to imitate different treatment options available for the treatment of ectopic maxillary canines including: alignment of the impacted maxillary canine; substituted premolars; retained deciduous canines; or gaps present. The images were embedded into piloted questionnaires. Each participant completing the questionnaire was asked to mark the visual analogue scale (VAS) beneath each image according to their perception of attractiveness of each image. Quantitative scoring of the perceived attractiveness of the smile was assessed by one calibrated assessor measuring the distance from the start of the scale to the marked cross placed on the VAS. A two-way ANOVA (mixed between-within subject's ANOVA) was used to compare perception of differences in smile aesthetics. RESULTS: There were significant differences found in the VAS between the groups (P = 0.002) and between the treatment options (P < 0.001) There was no statistically significant difference found between the aligned canines and substituted premolars images by the patient (P = 0.2) or parent group (P = 0.5). All groups most disliked the treatment option where gaps were present at the end of treatment. CONCLUSION: The patient and parent groups showed similar perception in smile aesthetics for aligned canines and substituted premolars and all groups showed a strong dislike to the presence of gaps. The orthodontist group showed the most critical aesthetic perceptions.

Comparative analysis for five fixations of Pauwels-I by the biomechanical finite-element method.

Background: Little is known about how biomechanics govern the five fixtures such as DHS, MLS, DHS + LS, LP, and HA are accepted as common therapeutic techniques. Aims and objectives: A series of numerical models for a femoral neck fracture of Pauwels-I will be constructed by innovative approach of finite element in order to determine the most optimized option in comparison with biomechanical performance. Method: Twenty sets of computer tomography scanned femora were imported onto Mimics to extract 3 D models; these specimens were transferred to Geomagic-Studio for a simulative osteotomy and kyrtograph; then, they underwent UG to fit simulative solid models; 5 sorts of fixture were then expressed by Pro-Engineer virtually. After processing with HyperMesh, all compartments (fracture model + internal implant) were assembled onto 5 systems: "Dynamic Hip Screw (DHS), Multiple Lag screw (MLS), DHS + LS, femoral Locking Plate (LP) and HemiArthroplasty (HA)." Eventually, numerical models of the finite-elemental analysis were exported to AnSys to determine the solution. Result: Four models of fixation and a simulation of HA for Pauwels-I were established, validated, and analyzed with the following findings: In term of displacement, these 5 fixtures ranged between 0.3801 and 0.7536 mm have no significant difference; in term of stress, the averages of peaks for integral assemblage are b(MLS) = 43.5766 ≈< d(LP) = 43.6657 ≈< e(Ha) = 43.6657 < c(DHS + LS) = 66.5494 < a(DHS) = 105.617 in MPa indicate that MLS, LP and HA are not significantly different, but less than DHS + LS or DHS in each. Conclusion: A fixture of MLS or LP with optional HA should be recommended to clinically optimize a Pauwels-I facture.

Can the current hypodontia care pathway promote shared decision-making?

OBJECTIVE: To determine the extent to which the current care pathway in hypodontia promotes shared decision-making (SDM). DESIGN: Exploratory cross-sectional study using qualitative methods. SETTING: Orthodontic department of two NHS teaching hospitals in Yorkshire. PARTICIPANTS: Young people aged 12-16 years with hypodontia of any severity and at any stage of treatment, and their parents and guardians. METHODS: (1) Observation and audio-recording of interdisciplinary consultation in hypodontia clinics (n = 5) without any researcher interference; (2) short, structured interviews with young people with hypodontia (n = 8) and their parent (n = 8) using a topic guide to explore themes around decision-making. Audio-recordings were transcribed and analysed using a thematic framework. RESULTS: Consultations were used as an opportunity for interdisciplinary discussion, information provision and treatment planning. Evidence of good communication was observed but patient engagement was low. The decision to be made was usually stated and treatment options discussed, but time constraints limited the scope for adequate information exchange and assessment of understanding. No methods were used to establish patient and family preferences or values. Interviews suggested parents expect the dental team to make decisions and young people rely on parental advocacy. Despite little evidence of SDM, participants reported satisfaction with their treatment. CONCLUSIONS: The current care pathway for hypodontia does not support clinicians in the steps of SDM. Recommendations for improving SDM processes include support to identify preference-based decisions, greater access to comprehensive and accessible patient information to enable preparation for consultation, alternative methods for effective communication of complex information and use of preference elicitation tools to aid value-driven decision-making.

Accuracy of capturing oncology facial defects with multimodal image fusion versus laser scanning.

STATEMENT OF PROBLEM: Fabrication of conventional facial prostheses is a labor-intensive process which traditionally requires an impression of the facial defect and surrounding tissues. Inaccuracies occur during the facial moulage because of soft-tissue compression, the patient's reflex movements, or the lack of support for the impression material. A variety of 3D imaging techniques have been introduced during the production of facial prostheses. However, the accuracy of the different imaging techniques has not been evaluated sufficiently in this clinical context. PURPOSE: The purpose of this in vitro study was to compare the difference in accuracy of capturing oncology facial defects with multimodal image fusion and laser scanning against a cone beam computed tomography (CBCT) reference scan. MATERIAL AND METHODS: Ten gypsum casts of oncology facial defects were acquired. To produce reference models, a 3D volumetric scan was obtained using a CBCT scanner and converted into surface data using open-source medical segmentation software. This model was cropped to produce a CBCT mask using an open-source system for editing meshes. The multimodal image fusion model was created using stereophotogrammetry to capture the external facial features and a custom optical structured light scanner to record the defect. The gypsum casts were also scanned using a commercial 3D laser scanner to create the laser-scanned model. Analysis of the best fit of each experimental model to the CBCT mask was performed in MeshLab. The unsigned mean distance was used to measure the absolute deviation of each model from the CBCT mask. A paired-samples t test was conducted to compare the mean global deviation of the 2 imaging modalities from the CBCT masks (α=.05). RESULTS: A statistically significant difference was found in the mean global deviation between the multimodal imaging model (220 ±50 µm) and the laser-scanned model (170 ±70 µm); (t(9)=2.56, P=.031). The color error maps illustrated that the greatest error was located at sites distant to the prosthesis margins. CONCLUSIONS: The laser-scanned models were more accurate; however, the mean difference of 50 µm is unlikely to be clinically significant. The laser scanner had limited viewing angles and a longer scan time which may limit its transferability to maxillofacial practice.

Using three-dimensional average facial meshes to determine nasolabial soft tissue deformity in adult UCLP patients.

BACKGROUND AND PURPOSE: There is limited literature discussing the residual nasolabial deformity of adult patients prior to undergoing orthognathic surgery. The purpose of this study is to determine the site and severity of the residual nasolabial soft tissue deformity between adult unilateral cleft lip and palate (UCLP) patients and a non-cleft reference group, prior to orthognathic surgery. MATERIAL AND METHODS: Sixteen adult male UCLP patients, who all received primary lip and palate surgery according to a standardised Hong Kong protocol were recruited for this study. Facial images of each individual were captured using three-dimensional (3D) stereophotogrammetry and compared to a previous published Hong Kong non-cleft reference group of 48 male adults. Using two-sample t-tests differences in linear and angular measurements and asymmetry scores were evaluated between the two groups. In addition a "conformed" average UCLP facial template was superimposed and compared to conformed average non-cleft reference group facial template. Reproducibility of the measurements were assessed using Students paired t-tests and coefficients of reliability. MAIN FINDINGS: Significant differences in linear and angular measurements and asymmetry scores were observed between the two groups (p < 0.05). Adult UCLP patients showed significantly narrower nostril floor widths, longer columella length on the unaffected side, a wider nose, shorter cutaneous lip height, shorter upper lip length and shorter philtrum length. Prior to orthognathic surgery adult UCLP patients showed significantly more facial asymmetry. Superimposition of the average facial meshes clearly showed the site and severity of the deficiency in the x, y and z-directions. CONCLUSIONS: Many of the nasolabial characteristics reported to be present in children following primary UCLP repair continue into adulthood. The detrimental soft tissue effects of orthognathic surgery for UCLP patients may be different to non-cleft individuals; and as such the site and severity of the residual deformity should be assessed prior to surgery.

Development of a Discrete-Choice Experiment (DCE) to Elicit Adolescent and Parent Preferences for Hypodontia Treatment.

OBJECTIVE: Our objective was to develop and test a discrete-choice experiment (DCE) survey to elicit adolescent and parent preferences for dental care for hypodontia (a developmental condition where one or more teeth fail to develop). METHODS: This was a mixed-methods study. Participants were adolescents (aged 12-16 years) with hypodontia and their parents and the dentists providing hypodontia care. Stage one entailed attribute development, as follows. (1) Attribute identification: systematic review of hypodontia literature; interviews with adolescents with hypodontia (n = 8) and parents (n = 8); observation of hypodontia clinical consultations (n = 5); environmental scan of hypodontia patient information resources (n = 30); and systematic analysis of social media posts (n = 176). (2) Attribute selection: stakeholder consultation to develop items for a questionnaire; rating and ranking questionnaire for adolescents with hypodontia and parents (n = 18); further stakeholder consultation. Stage two involved the development of the DCE survey, and stage three included the pre-testing using cognitive interviews with adolescents (n = 12) and parents (n = 8) to assess face and content validity. RESULTS: The attribute long list included 27 attributes focusing on service delivery and treatment outcome, from which seven 'important' attributes were selected for pre-testing. Cognitive interviewing suggested adolescents found the DCE choice tasks challenging to understand; the survey was modified to enhance its acceptability. One attribute was excluded as it showed poor validity with adolescents. Pre-testing suggested DCE choice tasks encouraged thinking and discussion about preferences for treatment. CONCLUSIONS: Including the target respondent group in all stages of DCE development ensured the final DCE survey was valid and acceptable. DCE methods appear to be a useful tool for exploring joint decision making alongside conventional preference elicitation.

A Comparative Analysis of Tooth Size Discrepancy between Male and Female Subjects Presenting with a Class I Malocclusion.

OBJECTIVES: To evaluate the tooth size discrepancy and Bolton's ratios between male and female subjects with a Class I malocclusion. MATERIALS AND METHODS: The digital e-models of 100 male and 100 female 12-year-old southern Chinese children with a Class I malocclusion were selected. The mesiodistal widths from permanent first molar to the contralateral side first molar of the upper and lower dentitions were measured. Differences between the tooth size discrepancy, together with the anterior and overall Bolton's ratios between male and female subjects, were assessed using a two-sample t-test. A paired t-test was used to determine differences between antimetric pairs of teeth within the same arch. RESULTS: Females had statistically significant smaller teeth than males (P < 0.05) except the upper left and lower left lateral incisor and lower left and right central incisors. The mean values of anterior Bolton's ratios for males and females were 77.04 and 77.03, respectively (P > 0.05), while the mean values of overall Bolton's ratios of male and female are 90.48 and 90.65, respectively (P < 0.05). The clinical significant differences (Cohen's d > 0.2) for contralateral tooth size were shown on the maxillary canines, lateral incisors, and central incisors of males; and mandibular canines and lateral incisors of females. CONCLUSIONS: Southern Chinese females presenting with Class I malocclusions have smaller mesiodistal tooth dimensions compared to males. Both males and females presented several tooth size asymmetries. There are no statistical differences in anterior and overall Bolton's ratios between the genders.

Assessment of information resources for people with hypodontia.

AIM: To assess the adequacy of patient information to support understanding and decision-making for people affected by hypodontia. METHODS: 1) Questionnaire to understand the provision of patient information by dentists; 2) Systematic search to identify online open-access patient information; 3) Quality assessment of written patient information. RESULTS: Questionnaire response rate was 49% (319/649); 91% examined and/or treated people with hypodontia. Most general dentists referred patients to specialist services without providing written hypodontia information. The majority of dental specialists provide patient leaflets but less than a third used web-resources. Only 19% of respondents felt current resources were fit-for-purpose. Thirty-one patient resources (18 leaflets and 13 online) were assessed against quality criteria. The aim of the resource was seldom explicit, the content was often incomplete and variation in readability scores indicated high levels of literacy were required. DISCUSSION: Access to, and quality of, patient information for hypodontia is inadequate. Current resources are not sufficiently comprehensive to prepare young patients to engage in shared dental care decisions with their parents and/or dental professionals. CONCLUSION: There is a need for improved access to, and provision of, information about hypodontia if dental professionals want to meet best practice guidance and involve patients in shared decision-making.

Identification and appraisal of outcome measures used to evaluate hypodontia care: A systematic review.

INTRODUCTION: Identification and appraisal of the outcome measures that have been used to evaluate hypodontia treatment and deliver services are essential for improving care. A lack of alignment between outcomes and patient values can limit the scope for patient-centered care. Our objectives were to identify and appraise the outcomes selected to evaluate hypodontia care. METHODS: Data sources included 10 electronic databases and grey literature, searched using terms for hypodontia and its treatment methods. Study eligibility included mixed study designs to ensure comprehensive identification of outcomes, excluding case reports and case series with fewer than 10 participants and nonsystematic reviews. Participants and interventions involved people with hypodontia receiving any dental treatment to manage their hypodontia. Simulated treatment, purely laboratory-based interventions, and future treatments still in development were excluded. Research outcomes were identified and synthesised into 4 categories: clinical indicators, and patient-reported, clinician-reported, and lay-reported outcomes. No synthesis of efficacy data was planned, and consequently no methodologic quality appraisal of the studies was undertaken. RESULTS: The search identified 497 abstracts, from which 106 eligible articles were retrieved in full. Fifty-six studies and 8 quality-improvement reports were included. Clinical indicators were reported in 49 studies (88%) including appearance, function, dental health, treatment longevity, treatment success and service delivery. Patient-reported outcomes were given in 22 studies (39%) including oral health-related quality of life, appearance, function, symptoms of temporomandibular dysfunction, and patient experience. Clinician-reported outcomes were limited to appearance. Variability was seen in the tools used for measuring outcomes. CONCLUSIONS: There is a lack of rationale and consistency in the selection of outcome measures used to evaluate hypodontia care. Outcomes are largely clinician and researcher-driven with little evidence of their relevance to patients. There was a paucity of outcomes measuring access to care, quality of care, and cost. Evidence from hypodontia research is clinician-focused and likely to have limited value to support patients during decision making. Attempts to synthesise the evidence base for translation into practice will be challenging. There is a need for a core outcomes set with a patient-centric approach to drive improvements in health services.

Dental Arch Relationships and Reverse Headgear Effects in Southern Chinese Patients with Unilateral Cleft Lip and Palate: A Retrospective Study.

OBJECTIVE: To evaluate the severity of the dental arch relationships and the treatment outcomes of reverse headgear (RHG) in southern Chinese patients with unilateral cleft lip and palate (UCLP). DESIGN: A retrospective study. SETTING: Faculty of Dentistry, The University of Hong Kong. PATIENTS: Thirty-eight UCLP patients with complete records. Among them, 14 were later treated with RHG (RHG group) and 24 were under review (non-RHG group) before definitive orthodontic or in conjunction with orthognathic surgery. INTERVENTIONS: Study models at T1 (aged 9.4 ± 0.4 years old), prebone grafting and before any orthodontic treatment started; T2 (aged 11.3 ± 0.6 years old), after bone grafting, and RHG treatment (RHG group) or under review (non-RHG group); and T3 (aged 15.3 ± 3.2 years old), pretreatment of definitive orthodontic or in conjunction with orthognathic surgery. MAIN OUTCOME MEASURES: With satisfactory intra- and interexaminer agreement proven by the kappa value, the dental arch relationships of the study models at T1, T2, and T3 were assessed by a solo calibrated examiner using the GOSLON Yardstick. RESULTS: The median GOSLON score for southern Chinese patients with UCLP at T1 was 4.0. Sixty percent of the patients were categorized as "poor" at T1. RHG significantly improved dental arch relationships from T1 to T2, and the improvement was maintained until T3 assessed by the GOSLON Yardstick. CONCLUSIONS: The dental arch relationships in southern Chinese UCLP patients at 8 to 10 years old are unfavorable. RHG treatment shows positive effects in improving the dental arch relationships in UCLP patients, as assessed by the GOSLON Yardstick.