Correction: ECM-based bioadhesive hydrogel for sutureless repair of deep anterior corneal defects.

Correction for 'ECM-based bioadhesive hydrogel for sutureless repair of deep anterior corneal defects' by Safieh Boroumand et al., Biomater. Sci., 2024, https://doi.org/10.1039/d4bm00129j.

ECM-based bioadhesive hydrogel for sutureless repair of deep anterior corneal defects.

Corneal transplantation is the gold standard treatment for corneal-related blindness; however, this strategy faces challenges such as limited donor cornea, graft rejection, suture-related complications, and the need for specialized equipment and advanced surgical skills. Development of tissue adhesives for corneal regeneration is of great clinical value. However, currently available corneal tissue sealants pose challenges, such as lack of safety, biocompatibility, and desired mechanical properties. To meet these requirements simultaneously, a bovine stromal corneal extracellular matrix (dCor) was used to design a bioadhesive photocurable hydrogel based on gelatin methacrylate (GelMA) and polyethylene glycol diacrylate (PEGDA) hydrogels (dCor/Gel-PEG). Integration of dCor into the dual networks of GelMA and PEGDA (Gel-PEG) led to a bioadhesive hydrogel for curing corneal defects, which could be crosslinked by Irgacure 2959 within 5 min ultraviolet irradiation. The viability of corneal stromal stem cells (CSSCs) was improved on the dCor/Gel-PEG hydrogel in comparison to the Gel-PEG hydrogel. The gene expression profile supported the keratocyte differentiation of CSSCs seeded on dCor/Gel-PEG via increased KERA and ALDH, with inhibited myofibroblast transdifferentiation via decreased α-SMA due to the presence of dCor. Interestingly, the dCor/Gel-PEG hydrogel exhibited favorable mechanical performance in terms of elasticity and bioadherence to the host corneal stroma. Ex vivo and in vivo examinations proved the feasibility of this hydrogel for the sutureless reconstruction of deep anterior corneal defects with promising histopathological results.

Nanoscale vibration could promote tenogenic differentiation of umbilical cord mesenchymal stem cells.

Regulation of mesenchymal stem cell (MSC) fate for targeted cell therapy applications has been a subject of interest, particularly for tissues such as tendons that possess a marginal regenerative capacity. Control of MSCs' fate into the tendon-specific lineage has mainly been achieved by implementation of chemical growth factors. Mechanical stimuli or 3-dimensional (D) scaffolds have been used as an additional tool for the differentiation of MSCs into tenocytes, but oftentimes, they require a sophisticated bioreactor or a complex scaffold fabrication technique which reduces the feasibility of the proposed method to be used in practice. Here, we used nanovibration to induce the differentiation of MSCs toward the tenogenic fate solely by the use of nanovibration and without the need for growth factors or complex scaffolds. MSCs were cultured on 2D cell culture dishes that were connected to piezo ceramic arrays to apply nanovibration (30-80 nm and 1 kHz frequency) over 7 and 14 d. We observed that nanovibration resulted in significant overexpression of tendon-related markers in both gene expression and protein expression levels, while there was no significant differentiation into adipose and cartilage lineages. These findings could be of assistance in the mechanoregulation of MSCs for stem cell engineering and regenerative medicine applications.

Effects of Different Perfusing Routes through The Portal Vein, Hepatic Vein, and Biliary Duct on Whole Rat Liver Decellularization.

OBJECTIVE: Organ transplantation is the last therapeutic choice for end-stage liver failure, which is limited by the lack of sufficient donors. Decellularized liver can be used as a suitable matrix for liver tissue engineering with clinical application potential. Optimizing the decellularization procedure would obtain a biological matrix with completely removed cellular components and preserved 3-dimensional structure. This study aimed to evaluate the decellularization efficacy through three anatomical routes. MATERIALS AND METHODS: In this experimental study, rat liver decellularization was performed through biliary duct (BD), portal vein (PV), and hepatic vein (HV); using chemical detergents and enzymes. The decellularization efficacy was evaluated by measurement of DNA content, extracellular matrix (ECM) total proteins, and glycosaminoglycans (GAGs). ECM preservation was examined by histological and immunohistochemical (IHC) staining and scanning electron microscopy (SEM). Scaffold biocompatibility was tested by the MTT assay for HepG2 and HUVEC cell lines. RESULTS: Decellularization through HV and PV resulted in a transparent scaffold by complete cell removal, while the BD route produced an opaque scaffold with incomplete decellularization. H and E staining confirmed these results. Maximum DNA loss was obtained using 1% and 0.5% sodium dodecyl sulfate (SDS) in the PV and HV groups and the DNA content decreased faster in the HV group. At the final stages, the proteins excreted in the HV and PV groups were significantly less than the BD group. The GAGs level was diminished after decellularization, especially in the PV and HV groups. In the HV and PV groups the collagen amount was significantly more than the BD group. The IHC and SEM images showed that the ECM structure was preserved and cellular components were entirely removed. MTT assay showed the biocompatibility of the decellularized scaffold. CONCLUSION: The results revealed that the HV is a more suitable route for liver decellularization than the PV and BD.

Aspirin effect on bone remodeling and skeletal regeneration: Review article.

Bone tissues are one of the most complex tissues in the body that regenerate and repair themselves spontaneously under the right physiological conditions. Within the limitations of treating bone defects, mimicking tissue engineering through the recruitment of scaffolds, cell sources and growth factors, is strongly recommended. Aspirin is one of the non-steroidal anti-inflammatory drugs (NSAIDs) and has been used in clinical studies for many years due to its anti-coagulant effect. On the other hand, aspirin and other NSAIDs activate cytokines and some mediators in osteoclasts, osteoblasts and their progenitor cells in a defect area, thereby promoting bone regeneration. It also stimulates angiogenesis by increasing migration of endothelial cells and the newly developed vessels are of emergency in bone fracture repair. This review covers the role of aspirin in bone tissue engineering and also, highlights its chemical reactions, mechanisms, dosages, anti-microbial and angiogenesis activities.

A Bilayered, Electrospun Poly(Glycerol-Sebacate)/Polyurethane-Polyurethane Scaffold for Engineering of Endothelial Basement Membrane.

In the cardiovascular system, heart valves and vessels are subjected to continuous cyclic mechanical loadings due to the pulsatile nature of blood flow. Hence, in leveraging tissue engineering (TE) strategies to regenerate such a system, the candidate scaffold should not only be biocompatible with the desired biodegradation rate, but it should also be mechanically competent to provide a supportive structure for facilitating stem cells retention, growth, and differentiation. To this end, herein, we introduced a novel scaffold composed of poly(glycerol-sebacate) (PGS) and polyurethane (PU), which comprises of two layers: an electrospun pure PU layer beneath another electrospun PGS/PU layer with a different ratio of PGS to PU (3:2, 1:1, 2:3 Wt:Wt). The electrospun PGS/PU-PU scaffold was mechanically competent and showed intended hydrophilicity and a good biodegradation rate. Moreover, the PGS/PU-PU scaffold indicated cell viability and proliferation within ten days of in vitro cell culture and upon 7 day vascular endothelial growth factor (VEGF) stimulation, supported endothelial differentiation of mesenchymal stem cells by significant overexpression of platelet-endothelial cell adhesion molecule-1, von Willebrand factor, and VEGF receptor 2. The results of this study could be implemented in cardiovascular TE strategies when regeneration of blood vessel or heart valve is desired.

Altered mechanical properties of actin fibers due to breast cancer invasion: parameter identification based on micropipette aspiration and multiscale tensegrity modeling.

The biophysical properties of cells change with cancer invasion to fulfill their metastatic behavior. Cell softening induced by cancer is highly associated with alterations in cytoskeleton fibers. Changes in the mechanical properties of cytoskeletal fibers have not been quantified due to technical limitations. In this study, we used the micropipette aspiration technique to calculate and compare the viscoelastic properties of non-invasive and invasive breast cancer cells. We evaluated the mechanical properties of actin fibers and microtubules of two cancerous cell lines by using multiscale tensegrity modeling and an optimization method. Cancer invasion caused altered viscoelastic behavior of cells and the results of modeling showed changes in mechanical properties of major cytoskeleton fibers. The stiffness and viscosity constant of actin fibers in non-invasive cells were 1.28 and 2.27 times higher than those of the invasive cells, respectively. However, changes in mechanical properties of microtubules were minor. Immunofluorescent staining of fibers and their quantified distributions confirmed altered actin distribution among two cell lines, in contrast to microtubule distribution. This study highlights the function of cytoskeletal fibers in cancer progression, which could be of interest in designing therapeutic strategies to target cancer progress. Firstly, the viscoelastic behavior of non-invasive and invasive cells is examined with micropipette aspiration tests. A tensegrity model of cells is developed to mimic the viscoelastic behavior of cells, and tensegrity element stiffness is evaluated in an optimization procedure based on micropipette aspiration tests. Finally, by using immunofluorescent staining and confocal imaging, mechanical properties of actin filaments and microtubules of cancer cells are investigated during the course of metastasis.

The cooperative effects of micro-grooved topography and TGF-ß1 on the vascular smooth muscle cell contractile protein expression of the mesenchymal stem cells.

Cell morphological changes induced by micro-grooved topography have been shown to be an important regulator of smooth muscle (SM) differentiation of mesenchymal stem cells (MSCs). In addition to the micro-grooved topography, transforming growth factor-ß1 (TGF-ß1) can also modulate MSCs differentiation towards smooth muscle cells (SMCs) through alterations in cell morphological characteristics. Thus, it can be hypothesized that substrate topography and TGF-ß1 may interact to facilitate differentiation of MSCs into SMCs. In this study, we investigated the time-course cooperative effects of substrate topography and TGF-ß1 in the regulation of SM differentiation of human MSCs. Western blotting, followed by image analysis, was performed to assess the protein expression of α-actin, h1-calponin and gelsolin. Three-way analysis of variance was employed to investigate the main effect of each independent variable, i.e. TGF-ß1 conditioning, substrate topography and culture time, along with the interactions of these variables. Each of TGF-ß1, substrate topography and culture time significantly affected the protein expression of α-actin, h1-calponin and gelsolin. Overall, TGF-ß1 conditioning of the cells and culturing the cells on the micro-grooved substrate resulted in greater protein expression of α-actin and h1-calponin, and lesser protein expression of gelsolin. In addition to the isolated effects of the variables, treatment type interacted with substrate topography and culture time to regulate the expression of the above-mentioned proteins. This study indicated the feasibility of promoting SM differentiation of human MSCs by simultaneous recruitment of micro-grooved topography and TGF-ß1. The findings could be of assistance when effective utilization of chemo-physical cues is needed to achieve functional SMC-like MSCs in vitro.

Computational modeling of media flow through perfusion-based bioreactors for bone tissue engineering.

Bioreactor system has been used in bone tissue engineering in order to simulate dynamic nature of bone tissue environments. Perfusion bioreactors have been reported as the most efficient types of shear-loading bioreactor. Also, combination of forces, such as rotation plus perfusion, has been reported to enhance cell growth and osteogenic differentiation. Mathematical modeling using sophisticated infrastructure processes could be helpful and streamline the development of functional grafts by estimating and defining an effective range of bioreactor settings for better augmentation of tissue engineering. This study is aimed to conduct computational modeling for newly designed bioreactors in order to alleviate the time and material consuming for evaluating bioreactor parameters and effect of fluid flow hydrodynamics (various amounts of shear stress) on osteogenesis. Also, biological assessments were performed in order to validate similar parameters under implementing the perfusion or rotating and perfusion fluid motions in bioreactors' prototype. Finite element method was used to investigate the effect of hydrodynamic of fluid flow inside the bioreactors. The equations used in the simulation to calculate the velocity values and consequently the shear stress values include Navier-Stokes and Brinkman equations. It has been shown that rotational fluid motion in rotating and perfusion bioreactor produces more velocity and shear stress compared with perfusion bioreactor. Moreover, implementing the perfusion together with rotational force in rotating and perfusion bioreactors has been shown to have more cell proliferation and higher activity of alkaline phosphatase enzyme as well as formation of extra cellular matrix sheet, as an indicator of bone-like tissue formation.

Development of poly (mannitol sebacate)/poly (lactic acid) nanofibrous scaffolds with potential applications in tissue engineering.

Developing a biomimetic substrate with intrinsic potential for cell attachment and growth has always been a tissue engineering challenge. In the present research, we successfully fabricated PMS:PLA nanofibrous scaffolds for the first time using electrospinning process by adjusting blending ratios, feed rates and polymer concentrations. A desirable composition was found when homogenous nanofibers with an average fiber diameter of 235 ±â€¯38 nm were achieved at 10% w/v for PMS:PLA 60:40. The scaffolds were then characterized for their microstructure, mechanical strength and elasticity, degradation rate, porosity, wettability and cell/tissue compatibility. Mechanical analysis and degradation behavior of PMS:PLA nanofibrous scaffolds revealed appropriate elasticity, stiffness and strength, as well as degradation rate appropriate for soft tissues. Nitrogen adsorption-desorption analysis discovered that mesoporous nanofibers with enhanced specific surface area were fabricated. Further in vitro and in vivo biocompatibility evaluations revealed enhanced cytocompatibility, proliferation and tissue responses of PMS:PLA nanofibrous scaffolds with desirable cell-scaffold interactions. Moreover, PMS:PLA nanofibrous scaffolds exhibited negligible inflammatory responses with significantly thinner fibrotic capsule formation and minor infiltration of inflammatory cells compared to PLA nanofibers. These findings suggest that PMS/PLA nanofibrous scaffolds could be introduced as potential candidates with improved properties for soft tissue engineering applications.

Improved osteogenic differentiation of human induced pluripotent stem cells cultured on polyvinylidene fluoride/collagen/platelet-rich plasma composite nanofibers.

Blood transfusion or blood products, such as plasma, have a long history in improving health, but today, platelet-rich plasma (PRP) is used in various medical areas such as surgery, orthopedics, and rheumatology in many ways. Considering the high efficiency of tissue engineering in repairing bone defects, in this study, we investigated the combined effect of nanofibrous scaffolds in combination with PRP on the osteogenic differentiation potential of human induced pluripotent stem cells (iPSCs). Electrospinning was used for fabricating nanofibrous scaffolds by polyvinylidene fluoride/collagen (PVDF/col) with and without PRP. After scaffold characterization, the osteoinductivity of the fabricated scaffolds was studied by culturing human iPSCs under osteogenic medium. The results showed that PRP has a considerable positive effect on the biocompatibility of the PVDF/col nanofibrous scaffold when examined by protein adsorption, cell attachment, and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assays. In addition, the results obtained from alkaline phosphatase activity and calcium content assays demonstrated that nanofibers have higher osteoinductivity while grown on PRP-incorporated PVDF/col nanofibers. These results were also confirmed while the osteogenic differentiation of the iPSCs was more investigated by evaluating the most important bone-related genes expression level. According to the results, it can be concluded that PVDF/col/PRP has much more osteoinductivity while compared with the PVDF/col, and it can be introduced as a promising bone bio-implant for use in bone tissue engineering applications.

The Effect of Mandibular Flexure on Stress Distribution in the All-on-4 Treated Edentulous Mandible: A Comparative Finite-Element Study Based on Mechanostat Theory.

The All-on-4 treatment concept is a felicitous approach for treatment of edentulous mandible. Mandibular flexure plays a decisive role in several restorative failures-for instance, screw loosening, particularly in widely separated implant supports such as those utilized in All-on-4 treatment methods. We investigated the effect of mandibular flexure on stress distribution and likelihood of bone loss or growth in the implanted mandible using two frequently used All-on-4 methods of implantation: parallel and tilted. Three-dimensional finite-element models of mandible and dental implants together with their compartments were developed. Assuming sagittal symmetry for the mandible, only half of the full geometry was considered. In the parallel model, two dental implants were inserted into the mandible perpendicular to the occlusal plane. In the tilted model, the posterior implant was rotated 30° around the buccal-lingual axis. In both models, maximum stress was detected at the neck region of the posterior implant. This maximum stress was greater in the tilted model than in the parallel model. However, since the corresponding strain was considerably lower in the parallel model, according to mechanostat theory several elements in the parallel model were at risk of bone loss. In contrast, the greater strain in the tilted model decreased the likelihood of bone loss. These findings suggest that use of tilted implants in the treatment of edentulous mandible would reduce the probability of bone loss in vulnerable parts of the osseous tissue surrounding dental implants.

Correlation of the cell mechanical behavior and quantified cytoskeletal parameters in normal and cancerous breast cell lines.

BACKGROUND: Cancerous transformation of cells affects their mechanical behavior and cytoskeleton structure. OBJECTIVE: The objective of this research is to investigate a correlation between mechanical properties and cytoskeletal structure features in cancer cell formation. METHODS: Micropipette aspiration was used to compare mechanical properties of normal (MCF10A) and cancerous (T47D) epithelial breast cell lines. Immunofluorescence and confocal microscopy were employed for staining and imaging F-actin and microtubules, and quantifying their fluorescent intensity, anisotropy and fiber distribution. RESULTS: Results indicated higher F-actin intensity (43%) and anisotropy (50%) in normal cells compared to cancer cells, although there was no difference in the microtubules intensity between cell lines. Furthermore, reductions of cortex thickness and actin layer index (60%) were observed in suspended cancer cells compared to normal cells. Changes in cell physical properties induced by cancer were attributed to microtubules. The arranged fibrous structure of microtubules in normal cells was replaced by a disorganized structure in cancer cells. Cancerous cells were about four times softer with higher creep compliance compared to normal cells. CONCLUSIONS: Results of this study confirmed that alterations in cell mechanical properties induced by cancer are highly correlated with changes in F-actin and microtubule content and arrangement. It is suggested that such changes can enhance our knowledge of cancer initiation and progression.

Incorporated-bFGF polycaprolactone/polyvinylidene fluoride nanocomposite scaffold promotes human induced pluripotent stem cells osteogenic differentiation.

Bioactive scaffolds that can increase transplanted cell survival time at the defect site have a great promising potential to use clinically since tissue regeneration or secretions crucially depend on the transplanted cell survival. In this study embedded basic fibroblast growth factor (bFGF)-polycaprolactone-polyvinylidene fluoride (PCL-PVDF) hybrid was designed and fabricated by electrospinning as a bio-functional nanofibrous scaffold for bone tissue engineering. After morphological characterization of the PCL-PVDF (bFGF) scaffold, nanofibers biocompatibility was investigated by culturing of the human induced pluripotent stem cells (iPSCs). Then, the bone differentiation capacity of the iPSCs was evaluated when grown on the PCL-PVDF and PCL-PVDF (bFGF) scaffolds in comparison with culture plate as a control using evaluating of the common osteogenic markers. The viability assay displayed a significant increase in iPSCs survival rate when grown on the bFGF content scaffold. The highest alkaline phosphatase activity and mineralization were detected in the iPSCs while grown on the PCL-PVDF (bFGF) scaffolds. Obtained results from gene and protein expression were also demonstrated the higher osteoinductive property of the bFGF content scaffold compared with the scaffold without it. According to the results, the release of bFGF from PCL-PVDF nanofibers increased survival and proliferation rate of the iPSCs, which followed by an increase in its osteogenic differentiation potential. Taking together, PCL-PVDF (bFGF) nanofibrous scaffold demonstrated that can be noted as a promising candidate for treating the bone lesions by tissue engineering products.

Adipose-derived stem cells-conditioned medium improved osteogenic differentiation of induced pluripotent stem cells when grown on polycaprolactone nanofibers.

Considering that the common osteogenic growth factors cannot be transplanted with stem cells to the patients, many studies are underway to find a replacement for these factors. Recently, it has been determined that mesenchymal stem cell (MSC)-derived conditioned medium (CM) contains effective factors in the bone formation process. In the current study, the synergistic effect of adipose-derived MSC's CM, and polycaprolactone (PCL) scaffold was investigated on the osteogenic differentiation potential of human induced pluripotent stem cells (iPSCs). After scaffold fabrication by electrospinning and characterization by scanning electron microscopy, iPSCs proliferation in the presence of CM, PCL, and both was evaluated using 3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyl tetrazolium bromide. Then, iPSCs osteogenic differentiation was investigated while cultured on tissue culture plate and PCL under CM compared with the osteogenic medium using alizarin red staining, calcium content, alkaline phosphatase activity and gene and protein expression analysis. Proliferation rate of the iPSCs was increased while cultured under CM and its effect was synergistically enhanced by culture on PCL. Evaluation of the osteogenic markers was showed CM alone could induce osteogenic differentiation into the iPSCs and this potential was significantly increased while combined with PCL nanofibrous scaffold. According to the results, it was demonstrated that CM has an osteogenic induction property almost the same of the common osteogenic medium and it can also be used potentially with stem cells when transplant to the patients. CM can also help by prolonging cell survival at the site of the defect as well as accelerating healing process.

Poly (3-hydroxybutyrate-co-3-hydroxyvalerate) improved osteogenic differentiation of the human induced pluripotent stem cells while considered as an artificial extracellular matrix.

Cocell polymers can be the best implants for replacing bone defects in patients. The pluripotent stem cells produced from the patient and the nanofibrous polymeric scaffold that can be completely degraded in the body and its produced monomers could be also usable are the best options for this implant. In this study, electrospun poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) nanofibers were fabricated and characterized and then osteogenic differentiation of the human-induced pluripotent stem cells (iPSCs) was investigated while cultured on PHBV scaffold. MTT results showed that cultured iPSCs on PHBV proliferation were increased compared to those cultured on tissue culture polystyrene (TCPS) as the control. Alkaline phosphatase (ALP) activity and calcium content were also significantly increased in iPSCs cultured on PHBV compared to the cultured on TCPS under osteogenic medium. Gene expression evaluation demonstrated that Runx2, collagen type I, ALP, osteonectin, and osteocalcin were upregulated in iPSCs cultured on PHBV scaffold in comparison with those cultured on TCPS for 2 weeks. Western blot analysis have shown that osteocalcin and osteopontin expression as two major osteogenic markers were increased in iPSCs cultured on PHBV scaffold. According to the results, nanofiber-based PHBV has a promising potential to increase osteogenic differentiation of the stem cells and iPSCs-PHBV as a cell-co-polymer construct demonstrated that has a great efficiency for use as a bone tissue engineered bioimplant.

Substrate topography interacts with substrate stiffness and culture time to regulate mechanical properties and smooth muscle differentiation of mesenchymal stem cells.

Substrate stiffness and topography are two powerful means by which mesenchymal stem cells (MSCs) activities can be modulated. The effects of substrate stiffness on the MSCs mechanical properties were investigated previously, however, the role of substrate topography in this regard is not yet well understood. Moreover, in vessel wall, these two physical cues act simultaneously to regulate cellular function, hence it is important to investigate their cooperative effects on cellular activity. Herein, we investigated the combined effects of substrate stiffness, substrate topography and culture time on the mechanical behavior of MSCs. The MSCs were cultured on the stiff and soft substrates with or without micro-grooved topography for 10 days and their viscoelastic properties and smooth muscle (SM) gene expression were investigated on days 2, 6 and 10. In general, substrate topography significantly interacted with substrate stiffness as well as culture time in the modulation of cell viscoelastic behavior and SM gene expression. The micro-grooved, stiff substrates resulted in the maximum cell stiffness and gene expression of α-actin and h1-calponin, and these values were detected to be minimum in the smooth, soft substrates. The findings can be helpful in the mechano-regulation of MSCs for vascular tissue engineering applications.

Dose-dependent 60Co γ-radiation Effects on Human Endothelial Cell Mechanical Properties.

Exposure to ionizing radiation is unavoidable for noncancerous cells during the external radiotherapy process. Increasing the dose delivery fraction times leads to increasing the endothelial cell damage. Vascular abnormalities are commonly associated with the alternation of endothelium biomechanical properties. The goal of the present study was to quantify the elastic and viscoelastic properties of human umbilical vein endothelial cells (HUVECs) using the micropipette aspiration technique in conjunction with a theoretical model while an 8 Gy dose was given in four fractions. Confocal imaging was performed for evaluation of cytoskeletal changes during fractionation 60Co radiotherapy. The results indicated an increase in elastic modulus from 29.87 ± 1.04 Pa to 46.69 ± 1.17 Pa while the fractional doses increased from 0 Gy to 8 Gy along with the obvious cytoskeletal changes. Moreover, in the creep behavior of radiated groups, a significant decrease was shown in the time constant and viscoelastic properties. On the other hand, it was observed that the change in the biomechanical properties of the cells while applying a single fraction of 8 Gy was not exactly the same as that in the properties of the radiation-exposed cells while delivering an 8 Gy dose at 2 Gy per fraction. The observed differences in the biomechanical behavior of endothelium provide a quantitative description of radiobiological effects for evaluating the dose-response relationship as a biological dosimetry procedure.

The effects of short-term uniaxial strain on the mechanical properties of mesenchymal stem cells upon TGF-ß1 stimulation.

Cellular mechanical characteristics represent cell ability to produce tissue-specific metabolites. Therefore, to achieve effective cell therapy, a better understanding of the effects of chemo-mechanical stimuli on the mechanical properties of in vitro-treated cells is essential. Herein, we investigated the effects of uniaxial strain on the mechanical properties of mesenchymal stem cells (MSCs) upon transforming growth factor beta 1 (TGF-ß1) stimulation. The MSCs were categorized into control and test groups. In one test group, the MSCs were treated by TGF-ß1 for 6 d, and in the other, they were additionally subjected to 1-d uniaxial strain on day 2. The cell mechanical properties and smooth muscle (SM) gene expression were assessed on days 2, 4, and 6. During the entire experiment, the MSCs treated by TGF-ß1 ± uniaxial strain were induced to differentiate into SM-like cells by significantly upregulation of α-actin, SM22α, and h1-calponin in respect to the control samples. When the MSCs were treated with TGF-ß1 alone, their stiffness and viscosity decreased significantly on day 2 and then increased by increase in culture time. When the cells were subjected to 1-d uniaxial strain upon TGF-ß1 stimulation, their stiffness and viscosity significantly increased on days 2 and 4 and then decreased on day 6 to a level comparable to that of TGF-ß1 group. Different paths were noticeable among the treated samples to reach nearly similar states on day 6. It seems that uniaxial strain activates mechanobiological cascades by which cellular mechanical behavior can be regulated after its removal. However, these effects are transient and would diminish over time. The findings may be helpful in the chemo-mechanical regulation of MSCs.

Radiation therapy affects the mechanical behavior of human umbilical vein endothelial cells.

Radiation therapy has been widely utilized as an effective method to eliminate malignant tumors and cancerous cells. However, subjection of healthy tissues and the related networks of blood vessels adjacent to the tumor area to irradiation is inevitable. The aim of this study was to investigate the consequent effects of fractionation radiotherapy on the mechanical characteristics of human umbilical vein endothelial cells (HUVECs) through alterations in cytoskeleton organization and cell and nucleus morphology. In order to simulate the clinical condition of radiotherapy, the HUVECs were exposed to the specific dose of 2 Gy for 1-4 times among four groups with incremental total dose from 2 Gy up to 8 Gy. Fluorescence staining was performed to label F-actin filaments and nuclei. Micropipette aspiration and standard linear solid model were employed to evaluate the elastic and viscoelastic characteristics of the HUVECs. Radiotherapy significantly increased cell elastic moduli. Due to irradiation, instantaneous and equilibrium Young's modulus were also increased. Radiotherapy diminished HUVECs viscoelastic behavior and shifted their creep compliance curves downward. Furthermore, gamma irradiation elevated the nuclei sizes and to a lesser extent the cells sizes resulting in the accumulation of F-actin filaments within the rest of cell body. Endothelial stiffening correlates with endothelial dysfunction, hence the results may be helpful when the consequent effects of radiotherapy are the focus of concern.