High action gas switches.

High action, high voltage closing switches are the key components of pulsed power systems based on high energy capacitor banks, primarily used for high power lasers, electromagnetic accelerators, high pulsed magnetic field facilities, crushing materials, and electromagnetic compatibility tests. There are several options for closing switches, including ignitrons, vacuum switches, pseudo-spark switches, solid-state switches, and high pressure gas switches (spark gaps). Spark switches are currently the most used due to their relatively simple design, reliability, and ease of maintenance and repair. The main disadvantage of spark gaps is a limited lifetime, which is directly or indirectly related to the erosion of the electrodes. To prevent erosion of the electrodes, multichannel switches and switches with movement of the discharge channel were proposed. In this Review, both types of switches are considered.

Pulse generator with intermediate inductive storage as a lightning simulator.

Compact transportable generators are required for simulating a lightning current pulse for electrical apparatus testing. A bi-exponential current pulse has to be formed by such a generator (with a current rise time of about two orders of magnitude faster than the damping time). The objective of this study was to develop and investigate a compact pulse generator with intermediate inductive storage and a fuse opening switch as a simulator of lightning discharge. A Marx generator (six stages) with a capacitance of 1 µF and an output voltage of 240 kV was employed as primary storage. In each of the stages, two IK-50/3 (50 kV, 3 µF) capacitors are connected in parallel. The generator inductance is 2 µH. A test bed for the investigations was assembled with this generator. The generator operates without SF6 and without oil in atmospheric air, which is very important in practice. Straight copper wires with adjustable lengths and diameters were used for the electro-explosive opening switch. Tests were made with active-inductive loads (up to 0.1 Ω and up to 6.3 µH). The current rise time is lower than 1200 ns, and the damping time can be varied from 35 to 125 µs, following the definition of standard lightning current pulse in the IEC standard. Moreover, 1D MHD calculations of the fuse explosion were carried out self-consistently with the electric circuit equations, in order to calculate more accurately the load pulse parameters. The calculations agree fairly well with the tests. On the basis of the obtained results, the design of a transportable generator was developed for a lightning simulator with current of 50 kA and a pulse shape corresponding to the IEEE standard.

Two-electrode gas switch with electrodynamical acceleration of a discharge channel.

High-energy switches and trigger generators are required for MJ-level capacitor banks. We have developed a compact gas switch and a matched series injection trigger generator. A series inductance is required for isolation of the trigger pulse from the surrounded circuit. A saturable inductor is employed here because low inductance is needed after the switch breakdown. The switch is of coaxial two-electrode design with electrodynamic acceleration of a spark channel. The switch operates at atmospheric pressure. The spark gap can be triggered reliably down to zero voltage (at 50 kV self-breakdown voltage) with less than 35 ns timing jitter. Energy losses in this spark gap have been accurately investigated. The main results are as follows: energy losses in the switch do not exceed 4% at voltages higher than 15 kV, i.e., when operation voltage exceeds ∼36% of the self-breakdown voltage. The spark gap is designed for 24 kV charging voltage, at a current up to 250 kA, and ∼70 C charge transfer. In this paper, we present a design for the spark gap, inductor and trigger generator. Test bed schematics and results of the tests are also described.

Capacitor blocks for linear transformer driver stages.

In the Linear Transformer Driver (LTD) technology, the low inductance energy storage components and switches are directly incorporated into the individual cavities (named stages) to generate a fast output voltage pulse, which is added along a vacuum coaxial line like in an inductive voltage adder. LTD stages with air insulation were recently developed, where air is used both as insulation in a primary side of the stages and as working gas in the LTD spark gap switches. A custom designed unit, referred to as a capacitor block, was developed for use as a main structural element of the transformer stages. The capacitor block incorporates two capacitors GA 35426 (40 nF, 100 kV) and multichannel multigap gas switch. Several modifications of the capacitor blocks were developed and tested on the life time and self breakdown probability. Blocks were tested both as separate units and in an assembly of capacitive module, consisting of five capacitor blocks. This paper presents detailed design of capacitor blocks, description of operation regimes, numerical simulation of electric field in the switches, and test results.

High-voltage pulsed generator for dynamic fragmentation of rocks.

A portable high-voltage (HV) pulsed generator has been designed for rock fragmentation experiments. The generator can be used also for other technological applications. The installation consists of low voltage block, HV block, coaxial transmission line, fragmentation chamber, and control system block. Low voltage block of the generator, consisting of a primary capacitor bank (300 µF) and a thyristor switch, stores pulse energy and transfers it to the HV block. The primary capacitor bank stores energy of 600 J at the maximum charging voltage of 2 kV. HV block includes HV pulsed step up transformer, HV capacitive storage, and two electrode gas switch. The following technical parameters of the generator were achieved: output voltage up to 300 kV, voltage rise time of ∼50 ns, current amplitude of ∼6 kA with the 40 Ω active load, and ∼20 kA in a rock fragmentation regime (with discharge in a rock-water mixture). Typical operation regime is a burst of 1000 pulses with a frequency of 10 Hz. The operation process can be controlled within a wide range of parameters. The entire installation (generator, transmission line, treatment chamber, and measuring probes) is designed like a continuous Faraday's cage (complete shielding) to exclude external electromagnetic perturbations.

A compact submicrosecond, high current generator.

Pulsed current generator was developed for experiments with current carrying pulsed plasma. Main parts of the generator are capacitor bank, low inductive current driving lines, and central load part. Generator consists of four identical sections, connected in parallel to one load. Capacitor bank is assembled from 24 capacitor blocks (100 kV, 80 nF), connected in parallel. It stores 9.6 kJ at 100 kV charging voltage. Each capacitor block incorporates a multigap spark switch, which is able to commute by six parallel channels. Switches operate in dry air at atmospheric pressure. The generator was tested with an inductive load and a liner load. At 17.5 nH inductive load and 100 kV of charging voltage it provides 650 kA of current amplitude with 390 ns rise time with 0.6 ohms damping resistors in discharge circuit of each capacitor block. The net generator inductance without a load was optimized to be as low as 15 nH, which results in extremely low impedance of the generator (approximately 0.08 ohms). It ensures effective energy coupling with a low impedance load such as Z pinch. The generator operates reliably without any adjustments in 70-100 kV range of charging voltage. Jitter in delay between output pulse and triggering pulse is less than 5 ns at 70-100 kV charging voltage. Operation and handling are very simple, because no oil or purified gases are required for the generator. The generator has dimensions 5.24x1.2x0.18 m(3) and total weight about 1400 kg, thus manifesting itself as simple, robust, and cost effective apparatus.

Three-electrode gas switches with electrodynamical acceleration of a discharge channel.

High voltage, high current, and high Coulomb transfer closing switches are required for many high power pulsed systems. There are a few alternatives for closing switches, for example, ignitrons, vacuum switches, solid-state switches, high pressure gas switches (spark gaps), and some others. The most popular closing switches up to date are spark gaps due to relatively simple design, robustness, easily field maintenance, and repair. Main drawback of spark gaps is limited lifetime, which is related directly or indirectly to erosion of the electrodes. Multichannel switches and switches with moving arc have been proposed to prevent the electrodes erosion. This study investigates switches, where a spark channel is initiated in a three-electrode layout and then the spark accelerates due to electrodynamic force and moves along the extended electrodes. At a given current amplitude, the diameter of the extended electrodes allows to control the spark velocity and hence, the erosion of the electrodes providing the required lifetime. The first switch is designed for 24 kV charging voltage and approximately 4 C total charge transfer. This spark gap was tested at 25 kA peak current in 40 000 shots in a single polarity discharge and in 20 000 shots in bipolar discharge. Second spark gap is designed for 24 kV charging voltage and approximately 70 C total charge transfer. It was tested in 22 000 shots, at a current of 250 kA with a pulse length of 360 mus. In this paper, we present design of these spark gaps and trigger generator, describe the test bed, and present the results of the tests.

Mega-ampere submicrosecond generator GIT-32.

The GIT-32 current generator was developed for experiments with current carrying pulsed plasma. The main parts of the generator are capacitor bank, multichannel multigap spark switches, low inductive current driving lines, and central load part. The generator consists of four identical sections, connected in parallel to one load. The capacitor bank is assembled from 32 IEK-100-0.17 (0.17 microF, 40 nH, 100 kV) capacitors, connected in parallel. It stores approximately 18 kJ at 80 kV charging voltage. Each two capacitors are commuted to a load by a multigap spark switch with eight parallel channels. Switches operate in ambient air at atmospheric pressure. The GIT-32 generator was tested with 10, 15, and 20 nH inductive loads. At 10 nH load and 80 kV of charging voltage it provides 1 MA of current amplitude and 490 ns rise time with 0.8 Omega damping resistors in discharge circuit of each capacitor and 1.34 MA530 ns without resistors. The net generator inductance without a load was optimized to be as low as 12 nH, which results in extremely low self-impedance of the generator ( approximately 0.05 Omega). It ensures effective energy coupling with low impedance loads like Z pinch. The generator operates reliably without any adjustments in 40-80 kV range of charging voltage. Maximum jitter (relative to a triggering pulse) at 40 kV charging voltage is about 7 ns and lower at higher charging voltages. Operation and handling are very simple, because no oil and no purified gases are required for the generator. The GIT-32 generator has dimensions of 3200 x 3200 x 400 mm(3) and total weight of about 2500 kg, thus manifesting itself as a simple, robust, and cost effective apparatus.