RESUMO
The development of in vitro models recapitulating nanoparticle transport under physiological flow conditions is of great importance for predicting the efficacy of nanoparticle drug carriers. Liposomes are extensively used for drug delivery owing to their biocompatibility and biodegradability and the ability to carry both hydrophilic and hydrophobic compounds. Here, we used a library of liposomes with various dimensions and a microfluidic platform comprising a large array of uniformly sized breast cancer spheroids to explore size-dependent liposome internalization and retention in the spheroids under close-to-physiological interstitial conditions. Such a platform showed promising applications in the preclinical screening of small molecule drugs; however, the capability to deliver nanoparticles in the spheroid interior under close-to-physiological flow conditions was not explored. For the liposomes with diameters in the range of 45-200 nm, we show experimentally and by simulations that in comparison with liposome delivery solely by diffusion, flow significantly enhances liposome internalization in the microgels and mitigates the size-dependent spheroid penetration by the liposomes. The utility of the microfluidic platform was validated by evaluating the efficacy of clinically approved doxorubicin-loaded liposomes (Doxil), which exhibited superior retention in the spheroids under flow conditions, in comparison with free doxorubicin. This MF platform can serve as an in vitro model for screening the efficacy of drugs encapsulated in liposomes and find applications for screening other types of nanoparticle carriers for vaccine delivery, diagnostics, and skincare.
Assuntos
Doxorrubicina/análogos & derivados , Lipossomos , Neoplasias , Humanos , Lipossomos/química , Portadores de Fármacos/química , Microfluídica , Esferoides Celulares , Doxorrubicina/farmacologia , PolietilenoglicóisRESUMO
Spheroid-on-a-chip platforms are emerging as promising in vitro models that enable screening of the efficacy of biologically active ingredients. Generally, the supply of liquids to spheroids occurs in the steady flow mode with the use of syringe pumps; however, the utilization of tubing and connections, especially for multiplexing and high-throughput screening applications, makes spheroid-on-a-chip platforms labor- and cost-intensive. Gravity-induced flow using rocker platforms overcomes these challenges. Here, a robust gravity-driven technique was developed to culture arrays of cancer cell spheroids and dermal fibroblast spheroids in a high-throughput manner using a rocker platform. The efficiency of the developed rocker-based platform was benchmarked to syringe pumps for generating multicellular spheroids and their use for screening biologically active ingredients. Cell viability, internal spheroid structure as well as the effect of vitamin C on spheroids' protein synthesis was studied. The rocker-based platform not only offers comparable or enhanced performance in terms of cell viability, spheroids formation, and protein production by dermal fibroblast spheroids but also, from a practical perspective, offers a smaller footprint, requires a lower cost, and offers an easier method for handling. These results support the application of rocker-based microfluidic spheroid-on-a-chip platforms for in vitro screening in a high-throughput manner with industrial scaling-up opportunities.
RESUMO
Many fibrous biological tissues exhibit structural anisotropy due to the alignment of fibers in the extracellular matrix. To study the impact of such anisotropy on cell proliferation, orientation, and mobility, it is important to recapitulate and achieve control over the structure of man-made hydrogel scaffolds for cell culture. Here, we report a chemically crosslinked fibrous hydrogel due to the reaction between aldehyde-modified cellulose nanofibers and gelatin. We explored two ways to induce structural anisotropy in this gel by extruding the hydrogel precursor through two different printheads. The cellulose nanofibers in the hydrogel ink underwent shear-induced alignment during extrusion and retained it in the chemically crosslinked hydrogel. The degree of anisotropy was controlled by the ink composition and extrusion flow rate. The structural anisotropy of the hydrogel extruded through a nozzle affected the orientation of human dermal fibroblasts that were either seeded on the hydrogel surface or encapsulated in the extruded hydrogel. The reported straightforward approach to constructing fibrillar hydrogel scaffolds with structural anisotropy can be used in studies of the biological impact of tissue anisotropy.
RESUMO
Over the past decade, droplet microfluidics has attracted growing interest in biology, medicine, and engineering. In this feature article, we review the advances in droplet microfluidics, primarily focusing on the research conducted by our group. Starting from the introduction to the mechanisms of microfluidic droplet formation and the strategies for cell encapsulation in droplets, we then focus on droplet transformation into microgels. Furthermore, we review three biomedical applications of droplet microfluidics, that is, 3D cell culture, single-cell analysis, and in vitro organ and disease modeling. We conclude with our perspective on future directions in the development of droplet microfluidics for biomedical applications.
Assuntos
Microfluídica , Microgéis , Análise de Célula ÚnicaRESUMO
Food, chemicals, agricultural products, drugs, and vaccines should be transported and stored within an appropriate low-temperature range, following cold chain logistics. Violations of the required temperature regime are generally reported by time-temperature indicators; however, current sensors do not cover a sufficiently broad low-temperature range and may lack thermal and photostability. Here, we report a nanostructured solvatochromic temperature indicator formed from cellulose nanocrystals decorated with carbon dots (C-dots). The indicator utilizes a strong nonlinear dependence of photoluminescence of C-dots on the composition of water/dimethyl sulfoxide (DMSO) solvent and a composition-dependent variation of the melting temperature of the water/DMSO mixture. Exceeding the temperature of the frozen mixed solvent above a designated threshold value results in solvent melting, flow, and impregnation of the nanostructured film, thus causing an irreversible change in the intensity and wavelength of photoluminescence emission of the film, which is reported both qualitatively and quantitatively. The indicator covers a temperature range from -68 to +19 °C and is cost-efficient, portable and photo- and thermostable.
Assuntos
Dimetil Sulfóxido , Refrigeração , Temperatura , Dimetil Sulfóxido/química , Solventes/química , Água/química , Carbono/químicaRESUMO
One of the obstacles limiting progress in the development of effective cancer therapies is the shortage of preclinical models that capture the dynamic nature of tumor microenvironments. Interstitial flow strongly impacts tumor response to chemotherapy; however, conventional in vitro cancer models largely disregard this key feature. Here, a proof of principle microfluidic platform for the generation of large arrays of breast tumor spheroids that are grown under close-to-physiological flow in a biomimetic hydrogel is reported. This cancer spheroids-on-a-chip model is used for time- and labor-efficient studies of the effects of drug dose and supply rate on the chemosensitivity of breast tumor spheroids. The capability to grow large arrays of tumor spheroids from patient-derived cells of different breast cancer subtypes is shown, and the correlation between in vivo drug efficacy and on-chip spheroid drug response is demonstrated. The proposed platform can serve as an in vitro preclinical model for the development of personalized cancer therapies and effective screening of new anticancer drugs.
Assuntos
Neoplasias da Mama , Microfluídica , Neoplasias da Mama/tratamento farmacológico , Linhagem Celular Tumoral , Avaliação Pré-Clínica de Medicamentos , Detecção Precoce de Câncer , Feminino , Humanos , Esferoides Celulares , Microambiente TumoralRESUMO
Microfluidic tumour spheroid-on-a-chip platforms enable control of spheroid size and their microenvironment and offer the capability of high-throughput drug screening, but drug supply to spheroids is a complex process that depends on a combination of mechanical, biochemical, and biophysical factors. To account for these coupled effects, many microfluidic device designs and operating conditions must be considered and optimized in a time- and labour-intensive trial-and-error process. Computational modelling facilitates a systematic exploration of a large design parameter space via in silico simulations, but the majority of in silico models apply only a small set of conditions or parametric levels. Novel approaches to computational modelling are needed to explore large parameter spaces and accelerate the optimization of spheroid-on-a-chip and other organ-on-a-chip designs. Here, we report an efficient computational approach for simulating fluid flow and transport of drugs in a high-throughput arrayed cancer spheroid-on-a-chip platform. Our strategy combines four key factors: i) governing physical equations; ii) parametric sweeping; iii) parallel computing; and iv) extensive dataset analysis, thereby enabling a complete "full-factorial" exploration of the design parameter space in combinatorial fashion. The simulations were conducted in a time-efficient manner without requiring massive computational time. As a case study, we simulated >15,000 microfluidic device designs and flow conditions for a representative multicellular spheroids-on-a-chip arrayed device, thus acquiring a single dataset consisting of â¼10 billion datapoints in â¼95 GBs. To validate our computational model, we performed physical experiments in a representative spheroid-on-a-chip device that showed excellent agreement between experimental and simulated data. This study offers a computational strategy to accelerate the optimization of microfluidic device designs and provide insight on the flow and drug transport in spheroid-on-a-chip and other biomicrofluidic platforms.
RESUMO
Organotypic micrometre-size 3D aggregates of skin cells (multicellular spheroids) have emerged as a promising in vitro model that can be utilized as an alternative of animal models to test active ingredients (AIs) of skincare products; however, a reliable dermal spheroid-based microfluidic (MF) model with a goal of in vitro AI screening is yet to be developed. Here, we report a MF platform for the growth of massive arrays of dermal fibroblast spheroids (DFSs) in a biomimetic hydrogel under close-to-physiological flow conditions and with the capability of screening AIs for skincare products. The DFSs formed after two days of on-chip culture and, in a case study, were used in a time-efficient manner for screening the effect of vitamin C on the synthesis of collagen type I and fibronectin. The computational simulation showed that the uptake of vitamin C was dominated by the advection flux. The results of screening the benchmark AI, vitamin C, proved that DFSs can serve as a reliable in vitro dermal model. The proposed DFS-based MF platform offers a high screening capacity for AIs of skincare products, as well as drug discovery and development in dermatology.
Assuntos
Técnicas de Cultura de Células , Microfluídica , Animais , Hidrogéis , Esferoides CelularesRESUMO
Angiogenesis, the development of new blood vessels from existing vasculature, is a key process in normal development and pathophysiology. In vitro models are necessary for investigating mechanisms of angiogenesis and developing antiangiogenic therapies. Microfluidic cell culture models of angiogenesis are favored for their ability to recapitulate 3D tissue structures and control spatiotemporal aspects of the microenvironments. To capture the angiogenesis process, microfluidic models often include endothelial cells and a fibroblast component. However, the influence of fibroblast organization on resulting angiogenic behavior remains unclear. Here a comparative study of angiogenic sprouting on a microfluidic chip induced by fibroblasts in 2D monolayer, 3D dispersed, and 3D spheroid culture formats, is conducted. Vessel morphology and sprout distribution for each configuration are measured, and these observations are correlated with measurements of secreted factors and numerical simulations of diffusion gradients. The results demonstrate that angiogenic sprouting varies in response to fibroblast organization with correlating variations in secretory profile and secreted factor gradients across the microfluidic device. This study is anticipated to shed light on how sprouting dynamics are mediated by fibroblast configuration such that the microfluidic cell culture design process includes the selection of a fibroblast component where the effects are known and leveraged.
Assuntos
Células Endoteliais , Microfluídica , Endotélio , Fibroblastos , Humanos , Neovascularização PatológicaRESUMO
Learning from the locomotion of natural organisms is one of the most effective strategies for designing microrobots. However, the development of bioinspired microrobots is still challenging because of technical bottlenecks such as design and seamless integration of high-performance actuation mechanism and high-density energy source for untethered locomotion. Directly harnessing the activation energy and intelligence of living tissues in synthetic micromachines provides an alternative route to developing biohybrid microrobots. Here, we propose an approach to engineering the genetic and nervous systems of a nematode worm, Caenorhabditis elegans, and creating an untethered, highly controllable living soft microrobot (called "RoboWorm"). A living worm is engineered through optogenetic and biochemical methods to shut down the signal transmissions between its neuronal and muscular systems while its muscle cells still remain optically excitable. Through dynamic modeling and experimental verification of the worm crawling, we found that the phase difference between the worm body curvature and the muscular activation pattern generates the thrust force for crawling locomotion. By reproducing the phase difference via optogenetic excitation of the worm body muscles, we emulated the major worm crawling behaviors in a controllable manner. Furthermore, with real-time visual feedback of the worm crawling, we realized closed-loop regulation of the movement direction and destination of single worms. This technology may facilitate scientific studies on the biophysics and neural basis of crawling locomotion of C. elegans and other nematode species.
Assuntos
Caenorhabditis elegans/fisiologia , Optogenética/métodos , Robótica/instrumentação , Robótica/métodos , Animais , Animais Geneticamente Modificados , Fenômenos Biomecânicos , Materiais Biomiméticos , Biomimética , Caenorhabditis elegans/genética , Simulação por Computador , Desenho de Equipamento , Locomoção/fisiologia , Modelos Biológicos , Músculos/fisiologia , Materiais InteligentesRESUMO
Over the past decades, inorganic nanoparticles (NPs), particularly metal oxide NPs, have attracted great attention due to their strong bactericidal effects. Researchers have used NPs to fabricate nanocomposite materials which have innate antibacterial capability. Herein, we present a straightforward method to fabricate antibacterial nanocomposites. Ag, TiO2, and ZnO NPs were dispersed within liquid silicone rubber (LSR) structure in four concentrations. Three different methods were used to evaluate the antibacterial efficiency of the NPs forming the nanocomposite materials: (I) the diffusion method, (II) agar counting plate, and (III) a live/dead assay of E. coli. The mechanical properties and hydrophobicity of the nanocomposites were characterized and correlated to the antibacterial efficiency of the NPs. In order to test the antibacterial efficiency in a high-throughput, cost-effective and efficient manner, a microfluidic device fabricated by 3D printing and soft-lithography methods was used. The LSR-15 wt% TiO2 nanocomposites showed the best antibacterial efficiency. In addition, TiO2 NPs formed the stiffest nanocomposites with very fine, even surface which increased the hydrophobicity of the surface where bacteria attach to grow, preventing bacteria from further growth.
Assuntos
Antibacterianos/química , Dispositivos Lab-On-A-Chip , Nanocompostos/química , Polímeros/química , Antibacterianos/farmacologia , Testes de Sensibilidade a Antimicrobianos por Disco-Difusão , Escherichia coli/efeitos dos fármacos , Nanopartículas Metálicas/química , Nanocompostos/toxicidade , Prata/química , Titânio/química , Óxido de Zinco/químicaRESUMO
Development of a biomaterial that is resistant to the adhesion and consequential proliferation of bacteria, represents a significant challenge in terms of application of such materials in various aspects of health care. Over recent years a large number of synthetic methods have appeared with the overall goal of the prevention of bacterial adhesion to surfaces. In contrast to these artificial techniques, living organisms over millions of years have developed different systems to prevent the colonization of microorganisms. Recently, these natural approaches, which are based on surface nanotopography, have been mimicked to fabricate a modern antibacterial surface. In this vein, use of nanoparticle (NP) technology has been explored in order to create a suitable antibacterial surface. However, few studies have focused on the toxicity of these techniques and the ecotoxicity of NP materials on mammalian and bacterial cells simultaneously. Researchers have observed that the majority of previous studies have demonstrated some of the extents of the harmful impacts on mammalian cells. Here, we provide a critical review of the NP approach to antibacterial surface treatment, and also summarize the studies of toxic effects caused by metal NPs on bacteria and mammalian cells.
Assuntos
Antibacterianos/farmacologia , Bactérias/efeitos dos fármacos , Nanopartículas/química , Animais , Antibacterianos/química , Humanos , Tamanho da Partícula , Propriedades de SuperfícieRESUMO
We present the development of a stable continuous, and integrated microfluidic platform for the high-throughput fabrication of monodisperse cell-laden microgel droplets with high and maintained cellular viability. This is through combining onto one chip all the required processes from the droplet generation in a flow focusing microfluidic junction passing through on-chip photocrosslinking to the separation of the droplets from the continuous oil phase. To avoid cellular aggregation during the droplet generation process, cells were treated with bovine serum albumin (BSA) before mixing with gelatin methacrylate (GelMA). And, a magnetic mixer was applied to the GelMA prepolymer-cell suspension syringe to eliminate cell sedimentation. These approaches resulted in having a reasonable distribution of cells among monodisperse microdroplets. The microdroplets were irradiated with a 405 nm wavelength laser beam while passing through the crosslinking chamber of the microfluidic device. The produced microgels enter the filtration unit of the same device where they were gently separated from the oil phase into the washing buffer aqueous solution of Tween 80 using the filter microposts array. The viability of the encapsulated cells was around 85% at day 1 and was maintained throughout 5 days. Using this method of controlling cell encapsulation with on-chip crosslinking and oil filtration, highly efficient cell-laden microgel production is achieved. The presented integrated microfluidic platform can be a candidate for standard cell-encapsulation experiments and other tissue engineering applications.