Significant Performance Improvement in n-Channel Organic Field-Effect Transistors with C60 :C70 Co-Crystals Induced by Poly(2-ethyl-2-oxazoline) Nanodots.

Solution-processed organic field-effect transistors (OFETs) have attracted great interest due to their potential as logic devices for bendable and flexible electronics. In relation to n-channel structures, soluble fullerene semiconductors have been widely studied. However, they have not yet met the essential requirements for commercialization, primarily because of low charge carrier mobility, immature large-scale fabrication processes, and insufficient long-term operational stability. Interfacial engineering of the carrier-injecting source/drain (S/D) electrodes has been proposed as an effective approach to improve charge injection, leading also to overall improved device characteristics. Here, it is demonstrated that a non-conjugated neutral dipolar polymer, poly(2-ethyl-2-oxazoline) (PEOz), formed as a nanodot structure on the S/D electrodes, enhances electron mobility in n-channel OFETs using a range of soluble fullerenes. Overall performance is especially notable for (C60 -Ih )[5,6]fullerene (C60 ) and (C70 -D5h(6) )[5,6]fullerene (C70 ) blend films, with an increase from 0.1 to 2.1 cm2 V-1 s-1 . The high relative mobility and eighteen-fold improvement are attributed not only to the anticipated reduction in S/D electrode work function but also to the beneficial effects of PEOz on the formation of a face-centered-cubic C60 :C70 co-crystal structure within the blend films.

Uniaxial Alignment of Conjugated Polymer Films for High-Performance Organic Field-Effect Transistors.

Polymer semiconductors have been experiencing a remarkable improvement in electronic and optoelectronic properties, which are largely related to the recent development of a vast library of high-performance, donor-acceptor copolymers showing alternation of chemical moieties with different electronic affinities along their backbones. Such steady improvement is making conjugated polymers even more appealing for large-area and flexible electronic applications, from distributed and portable electronics to healthcare devices, where cost-effective manufacturing, light weight, and ease of integration represent key benefits. Recently, a strong boost to charge carrier mobility in polymer-based field-effect transistors, consistently achieving the range from 1.0 to 10 cm2 V-1 s-1 for both holes and electrons, has been given by uniaxial backbone alignment of polymers in thin films, inducing strong transport anisotropy and favoring enhanced transport properties along the alignment direction. Herein, an overview on this topic is provided with a focus on the processing-structure-property relationships that enable the controlled and uniform alignment of polymer films over large areas with scalable processes. The key aspects are specific molecular structures, such as planarized backbones with a reduced degree of conformational disorder, solution formulation with controlled aggregation, and deposition techniques inducing suitable directional flow.

Pronounced Side Chain Effects in Triple Bond-Conjugated Polymers Containing Naphthalene Diimides for n-Channel Organic Field-Effect Transistors.

Three triple bond-conjugated naphthalene diimide (NDI) copolymers, poly{[ N, N'-bis(2-R1)-naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]- alt-[(2,5-bis(2-R2)-1,4-phenylene)bis(ethyn-2,1-diyl)]} (PNDIR1-R2), were synthesized via Sonogashira coupling polymerization with varying alkyl side chains at the nitrogen atoms of the imide ring and 2,5-positions of the 1,4-diethynylbenzene moiety. Considering their identical polymer backbone structures, the side chains were found to have a strong influence on the surface morphology/nanostructure, thus playing a critical role in charge-transporting properties of the three NDI-based copolymers. Among the polymers, the one with an octyldodecyl (OD) chain at the nitrogen atoms of imide ring and a hexadecyloxy (HO) chain at the 2,5-positions of 1,4-diethynylbenzene, P(NDIOD-HO), exhibited the highest electron mobility of 0.016 cm2 V-1 s-1, as compared to NDI-based copolymers with an ethylhexyl chain at the 2,5-positions of 1,4-diethynylbenzene. The enhanced charge mobility in the P(NDIOD-HO) layers is attributed to the well-aligned nano-fiber-like surface morphology and highly ordered packing structure with a dominant edge-on orientation, thus enabling efficient in-plane charge transport. Our results on the molecular structure-charge transport property relationship in these materials may provide an insight into novel design of n-type conjugated polymers for applications in the organic electronics of the future.

Remarkable Enhancement of the Hole Mobility in Several Organic Small-Molecules, Polymers, and Small-Molecule:Polymer Blend Transistors by Simple Admixing of the Lewis Acid p-Dopant B(C6F5)3.

Improving the charge carrier mobility of solution-processable organic semiconductors is critical for the development of advanced organic thin-film transistors and their application in the emerging sector of printed electronics. Here, a simple method is reported for enhancing the hole mobility in a wide range of organic semiconductors, including small-molecules, polymers, and small-molecule:polymer blends, with the latter systems exhibiting the highest mobility. The method is simple and relies on admixing of the molecular Lewis acid B(C6F5)3 in the semiconductor formulation prior to solution deposition. Two prototypical semiconductors where B(C6F5)3 is shown to have a remarkable impact are the blends of 2,8-difluoro-5,11-bis(triethylsilylethynyl)anthradithiophene:poly(triarylamine) (diF-TESADT:PTAA) and 2,7-dioctyl[1]-benzothieno[3,2-b][1]benzothiophene:poly(indacenodithiophene-co-benzothiadiazole) (C8-BTBT:C16-IDTBT), for which hole mobilities of 8 and 11 cm2 V-1 s-1, respectively, are obtained. Doping of the 6,13-bis(triisopropylsilylethynyl)pentacene:PTAA blend with B(C6F5)3 is also shown to increase the maximum hole mobility to 3.7 cm2 V-1 s-1. Analysis of the single and multicomponent materials reveals that B(C6F5)3 plays a dual role, first acting as an efficient p-dopant, and secondly as a microstructure modifier. Semiconductors that undergo simultaneous p-doping and dopant-induced long-range crystallization are found to consistently outperform transistors based on the pristine materials. Our work underscores Lewis acid doping as a generic strategy towards high performance printed organic microelectronics.

Modulation-Doped In2 O3 /ZnO Heterojunction Transistors Processed from Solution.

This paper reports the controlled growth of atomically sharp In2 O3 /ZnO and In2 O3 /Li-doped ZnO (In2 O3 /Li-ZnO) heterojunctions via spin-coating at 200 °C and assesses their application in n-channel thin-film transistors (TFTs). It is shown that addition of Li in ZnO leads to n-type doping and allows for the accurate tuning of its Fermi energy. In the case of In2 O3 /ZnO heterojunctions, presence of the n-doped ZnO layer results in an increased amount of electrons being transferred from its conduction band minimum to that of In2 O3 over the interface, in a process similar to modulation doping. Electrical characterization reveals the profound impact of the presence of the n-doped ZnO layer on the charge transport properties of the isotype In2 O3 /Li-ZnO heterojunctions as well as on the operating characteristics of the resulting TFTs. By judicious optimization of the In2 O3 /Li-ZnO interface microstructure, and Li concentration, significant enhancement in both the electron mobility and TFT bias stability is demonstrated.

Ambipolar Small-Molecule:Polymer Blend Semiconductors for Solution-Processable Organic Field-Effect Transistors.

We report on the fabrication of an organic thin-film semiconductor formed using a blend solution of soluble ambipolar small molecules and an insulating polymer binder that exhibits vertical phase separation and uniform film formation. The semiconductor thin films are produced in a single step from a mixture containing a small molecular semiconductor, namely, quinoidal biselenophene (QBS), and a binder polymer, namely, poly(2-vinylnaphthalene) (PVN). Organic field-effect transistors (OFETs) based on QBS/PVN blend semiconductor are then assembled using top-gate/bottom-contact device configuration, which achieve almost four times higher mobility than the neat QBS semiconductor. Depth profile via secondary ion mass spectrometry and atomic force microscopy images indicate that the QBS domains in the films made from the blend are evenly distributed with a smooth morphology at the bottom of the PVN layer. Bias stress test and variable-temperature measurements on QBS-based OFETs reveal that the QBS/PVN blend semiconductor remarkably reduces the number of trap sites at the gate dielectric/semiconductor interface and the activation energy in the transistor channel. This work provides a one-step solution processing technique, which makes use of soluble ambipolar small molecules to form a thin-film semiconductor for application in high-performance OFETs.

Diketopyrrolopyrrole-Based Metallated Polymer for Bulk-Heterojunction Solar Cells and Organic Field-Effect Transistors.

We report the synthesis and optoelectronic properties of novel platinum-based polymers (p-Pt-DPP) incorporating 3,6-di-2-thienyl-2,5-dihydro-2,5-diethylhexylpyrrolo[3,4-c]pyrrole-1,4-dione. The synthesized amorphous metallated polymer exhibited long wavelength absorption in the range of 500­684 nm and a band-gap as low as 1.75 eV. Organic field-effect transistors (OFETs) fabricated from p-Pt-DPP showed hole mobility of 1.6 × 10⁻³ cm² · V⁻¹s⁻¹ and an on/off ratio of 5 × 104. In addition, polymer solar cells (PSCs) based on p-Pt-DPP and PC71BM exhibited a photovoltaic efficiency of 1.22% under AM 1.5 G conditions with an illumination of 100 mW·cm−2 without any annealing process.

Effect of Polymer Gate Dielectrics on Charge Transport in Carbon Nanotube Network Transistors: Low-k Insulator for Favorable Active Interface.

Charge transport in carbon nanotube network transistors strongly depends on the properties of the gate dielectric that is in direct contact with the semiconducting carbon nanotubes. In this work, we investigate the dielectric effects on charge transport in polymer-sorted semiconducting single-walled carbon nanotube field-effect transistors (s-SWNT-FETs) by using three different polymer insulators: A low-permittivity (εr) fluoropolymer (CYTOP, εr = 1.8), poly(methyl methacrylate) (PMMA, εr = 3.3), and a high-εr ferroelectric relaxor [P(VDF-TrFE-CTFE), εr = 14.2]. The s-SWNT-FETs with polymer dielectrics show typical ambipolar charge transport with high ON/OFF ratios (up to ∼105) and mobilities (hole mobility up to 6.77 cm2 V-1 s-1 for CYTOP). The s-SWNT-FET with the lowest-k dielectric, CYTOP, exhibits the highest mobility owing to formation of a favorable interface for charge transport, which is confirmed by the lowest activation energies, evaluated by the fluctuation-induced tunneling model (FIT) and the traditional Arrhenius model (EaFIT = 60.2 meV and EaArr = 10 meV). The operational stability of the devices showed a good agreement with the activation energies trend (drain current decay ∼14%, threshold voltage shift ∼0.26 V in p-type regime of CYTOP devices). The poor performance in high-εr devices is accounted for by a large energetic disorder caused by the randomly oriented dipoles in high-k dielectrics. In conclusion, the low-k dielectric forms a favorable interface with s-SWNTs for efficient charge transport in s-SWNT-FETs.

Control of Threshold Voltage for Top-Gated Ambipolar Field-Effect Transistor by Gate Buffer Layer.

The threshold voltage and onset voltage for p-channel and n-channel regimes of solution-processed ambipolar organic transistors with top-gate/bottom-contact (TG/BC) geometry were effectively tuned by gate buffer layers in between the gate electrode and the dielectric. The work function of a pristine Al gate electrode (-4.1 eV) was modified by cesium carbonate and vanadium oxide to -2.1 and -5.1 eV, respectively, which could control the flat-band voltage, leading to a remarkable shift of transfer curves in both negative and positive gate voltage directions without any side effects. One important feature is that the mobility of transistors is not very sensitive to the gate buffer layer. This method is simple but useful for electronic devices where the threshold voltage should be precisely controlled, such as ambipolar circuits, memory devices, and light-emitting device applications.

Precisely Controlled Ultrathin Conjugated Polymer Films for Large Area Transparent Transistors and Highly Sensitive Chemical Sensors.

A uniform ultrathin polymer film is deposited over a large area with molecularlevel precision by the simple wire-wound bar-coating method. The bar-coated ultrathin films not only exhibit high transparency of up to 90% in the visible wavelength range but also high charge carrier mobility with a high degree of percolation through the uniformly covered polymer nanofibrils. They are capable of realizing highly sensitive multigas sensors and represent the first successful report of ethylene detection using a sensor based on organic field-effect transistors.

Large Enhancement of Carrier Transport in Solution-Processed Field-Effect Transistors by Fluorinated Dielectric Engineering.

The universal role of high-k fluorinated dielectrics in assisting the carrier transport in transistors for a broad range of printable semiconductors is explored. These results present general rules for how to design dielectric materials and achieve devices with a high carrier concentration, low disorder, reliable operation, and robust properties.

Synergistic High Charge-Storage Capacity for Multi-level Flexible Organic Flash Memory.

Electret and organic floating-gate memories are next-generation flash storage mediums for printed organic complementary circuits. While each flash memory can be easily fabricated using solution processes on flexible plastic substrates, promising their potential for on-chip memory organization is limited by unreliable bit operation and high write loads. We here report that new architecture could improve the overall performance of organic memory, and especially meet high storage for multi-level operation. Our concept depends on synergistic effect of electrical characterization in combination with a polymer electret (poly(2-vinyl naphthalene) (PVN)) and metal nanoparticles (Copper). It is distinguished from mostly organic nano-floating-gate memories by using the electret dielectric instead of general tunneling dielectric for additional charge storage. The uniform stacking of organic layers including various dielectrics and poly(3-hexylthiophene) (P3HT) as an organic semiconductor, followed by thin-film coating using orthogonal solvents, greatly improve device precision despite easy and fast manufacture. Poly(vinylidene fluoride-trifluoroethylene) [P(VDF-TrFE)] as high-k blocking dielectric also allows reduction of programming voltage. The reported synergistic organic memory devices represent low power consumption, high cycle endurance, high thermal stability and suitable retention time, compared to electret and organic nano-floating-gate memory devices.

Simultaneous Improvement of Hole and Electron Injection in Organic Field-effect Transistors by Conjugated Polymer-wrapped Carbon Nanotube Interlayers.

Efficient charge injection is critical for flexible organic electronic devices such as organic light-emitting diodes (OLEDs) and field-effect transistors (OFETs). Here, we investigated conjugated polymer-wrapped semiconducting single-walled carbon nanotubes (s-SWNTs) as solution-processable charge-injection layers in ambipolar organic field-effect transistors with poly(thienylenevinylene-co-phthalimide)s. The interlayers were prepared using poly(9,9-di-n-octylfluorene-alt-benzothiadiazole) (F8BT) or poly(9,9-dioctylfluorene) (PFO) to wrap s-SWNTs. In the contact-limited ambipolar OFETs, the interlayer led to significantly lower contact resistance (Rc) and increased mobilities for both holes and electrons. The resulting PTVPhI-Eh OFETs with PFO-wrapped s-SWNT interlayers showed very well-balanced ambipolar transport properties with a hole mobility of 0.5 cm(2)V(-1)S(-1) and an electron mobility of 0.5 cm(2)V(-1)S(-1) in linear regime. In addition, the chirality of s-SWNTs and kind of wrapping of conjugated polymers are not critical to improving charge-injection properties. We found that the improvements caused by the interlayer were due to the better charge injection at the metal/organic semiconductor contact interface and the increase in the charge concentration through a detailed examination of charge transport with low-temperature measurements. Finally, we successfully demonstrated complementary ambipolar inverters incorporating the interlayers without excessive patterning.

Development of high-performance printed organic field-effect transistors and integrated circuits.

Organic electronics is regarded as an important branch of future microelectronics especially suited for large-area, flexible, transparent, and green devices, with their low cost being a key benefit. Organic field-effect transistors (OFETs), the primary building blocks of numerous expected applications, have been intensively studied, and considerable progress has recently been made. However, there are still a number of challenges to the realization of high-performance OFETs and integrated circuits (ICs) using printing technologies. Therefore, in this perspective article, we investigate the main issues concerning developing high-performance printed OFETs and ICs and seek strategies for further improvement. Unlike many other studies in the literature that deal with organic semiconductors (OSCs), printing technology, and device physics, our study commences with a detailed examination of OFET performance parameters (e.g., carrier mobility, threshold voltage, and contact resistance) by which the related challenges and potential solutions to performance development are inspected. While keeping this complete understanding of device performance in mind, we check the printed OFETs' components one by one and explore the possibility of performance improvement regarding device physics, material engineering, processing procedure, and printing technology. Finally, we analyze the performance of various organic ICs and discuss ways to optimize OFET characteristics and thus develop high-performance printed ICs for broad practical applications.

An approach for an advanced anode interfacial layer with electron-blocking ability to achieve high-efficiency organic photovoltaics.

The interfacial properties of PEDOT:PSS, pristine r-GO, and r-GO with sulfonic acid (SR-GO) in organic photovoltaic are investigated to elucidate electron-blocking property of PEDOT:PSS anode interfacial layer (AIL), and to explore the possibility of r-GO as electron-blocking layers. The SR-GO results in an optimized power conversion efficiency of 7.54% for PTB7-th:PC71BM and 5.64% for P3HT:IC61BA systems. By combining analyses of capacitance-voltage and photovoltaic-parameters dependence on light intensity, it is found that recombination process at SR-GO/active film is minimized. In contrast, the devices using r-GO without sulfonic acid show trap-assisted recombination. The enhanced electron-blocking properties in PEDOT:PSS and SR-GO AILs can be attributed to surface dipoles at AIL/acceptor. Thus, for electron-blocking, the AIL/acceptor interface should be importantly considered in OPVs. Also, by simply introducing sulfonic acid unit on r-GO, excellent contact selectivity can be realized in OPVs.

Stable charge storing in two-dimensional MoS2 nanoflake floating gates for multilevel organic flash memory.

In this study, we investigated chemically exfoliated two-dimensional (2-D) nanoflakes of molybdenum disulfide (MoS2) as charge-storing elements for use in organic multilevel memory devices (of the printed/flexible non-volatile type) based on organic field-effect transistors (OFETs) containing poly(3-hexylthiophene) (P3HT). The metallic MoS2 nanoflakes were exfoliated in 2-methoxyethanol by the lithium intercalation method and were deposited as nano-floating gates between polystyrene and poly(methyl methacrylate), used as bilayered gate dielectrics, by a simple spin-coating and low temperature (<150 °C) process. In the developed OFET memory devices, electrons could be trapped/detrapped in the MoS2 nano-floating gates by modulating the charge carrier density in the active channel through gate bias control. Optimal memory characteristics were achieved by controlling the thickness and concentration of few-layered MoS2 nanoflakes, and the best device showed reliable non-volatile memory properties: a sufficient memory window of ∼23 V, programming-reading-erasing cycling endurance of >10(2) times, and most importantly, quasi-permanent charge-storing characteristics, i.e., a very long retention time (longer than the technological requirement of commercial memory devices (>10 years)). In addition, we successfully developed multilevel memory cells (2 bits per cell) by controlling the gate bias magnitude.

Solution-processed barium salts as charge injection layers for high performance N-channel organic field-effect transistors.

N-channel organic field-effect transistors (OFETs) have generally shown lower field-effect mobilities (µFET) than their p-type counterparts. One of the reasons is the energetic misalignment between the work function (WF) of commonly used charge injection electrode, i.e. gold (Au), and the lowest unoccupied molecular orbital (LUMO) of n-channel electron-transporting organic semiconductors. Here, we report barium salts as solution-processed interlayers, to improve the electron-injection and/or hole-blocking in top-gate/bottom-contact n-channel OFETs, based on poly{[N,N'-bis(2-octyldodecyl)-naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5'-(2,2'-dithiophene)} (P(NDI2OD-T2)) and phenyl-C61-butyric acid methyl ester (PC61BM). Two different barium salts, barium hydroxide (Ba(OH)2) and barium chloride (Ba(Cl)2), are employed as the ultrathin interlayer (∼2 nm); and they effectively tune the WF of Au from 4.9 eV, to as low as 3.5 eV. The resulting n-channel OFETs exhibit significantly improved µFET, approaching 2.6 cm(2)/(V s) and 0.1 cm(2)/(V s) for the best P(NDI2OD-T2) and PC61BM devices, respectively, with Ba(OH)2 as interlayer.

Simultaneous enhancement of electron injection and air stability in N-type organic field-effect transistors by water-soluble polyfluorene interlayers.

Here, we report the simultaneous attainment of efficient electron injection and enhanced stability under ambient conditions for top-gate/bottom-contact (TG/BC), n-type, organic field-effect transistors (OFETs) using water-soluble polyfluorene derivatives (WPFs). When inserting the WPF interlayers between a semiconductor and the BC Au electrodes, initially the ambipolar (6,6)-phenyl-C61butyric acid methyl ester (PCBM) OFETs were fully converted to unipolar charge transport characteristics that were exclusively n-type with significantly increased electron mobilities as high as 0.12 cm(2)/(V s) and a decreased threshold voltage. These improvements were mostly attributed to the interfacial dipoles of WPF layers that aligned to form a favorable energy band structure for efficient electron injection and to effectively block counter charge carriers. These were confirmed when values for the reduced work function of metal electrodes with WPFs and their correlated contact resistance were measured via the ultraviolet photoemission spectroscopy and the transmission-line method, respectively. Moreover, the WPF interlayers played an important role in air stability of PCBM OFETs that exhibited higher and appreciably enhanced by increasing the ethylene-oxide side chain lengths of WPFs, which presumably was due to the water/oxygen/ion capturing effects in the hydrophilic interlayers.

Organic field-effect transistors by a solvent vapor annealing process.

Organic field-effect transistor (OFET) attracts great interests from scientific research and industrial application because of its low-cost fabrication and excellent mechanical flexibility. Yet the charge carrier mobility of typical OFET is still around 1-5 cm2/Vs and needs to be further enhanced, ideally by cost effective processes or treatments. Here we review one of the straightforward but effective methods, solvent vapor annealing (SVA), to improve the crystallinity of organic semiconductor film leading enhancement of charge carrier mobility in OFETs. We start by introducing the basic mechanism of SVA, followed by experimental works on small molecules and then conjugated polymers. Along with those examples, we discuss the important factors in using SVA to form highly crystalline conjugated molecule films or organic single crystals to achieve high performance OFETs.

Inkjet-printing-based soft-etching technique for high-speed polymer ambipolar integrated circuits.

Here, we report the so-called soft-etching process based on an inkjet-printing technique for realizing high-performance printed and flexible organic electronic circuits with conjugated polymer semiconductors. The soft-etching process consists of selective etching of the gate made of a dielectric polymer and deposition of another gate dielectric layer. The method enables the use of a more desirable polymer dielectric layer for the p-channel and n-channel organic field-effect transistors (OFETs) in complementary integrated circuits. We fabricated high-performance ambipolar complementary inverters and ring oscillators (ROs) using poly([N,N'-bis(2-octyldodecyl)-naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5'-(2,2'-bithiophene)) (P(NDI2OD-T2)) as the active layer as well as poly(vinylidenefluoride-trifluoroethylene) (P(VDF-TrFE)) and polystyrene ((PS)/P(VDF-TrFE)) as dielectric materials for the p-channel (pull-up transistor) and n-channel (pull-down transistor) OFETs, respectively. The PS dielectric polymer was selectively etched by inkjetting of n-butyl acetate as an orthogonal solvent for P(NDI2OD-T2). Employing this methodology, the five-stage ambipolar ROs with P(NDI2OD-T2) exhibited an oscillation frequency of ∼16.7 kHz, which was much higher than that of non-soft-etched ROs with a single dielectric layer (P(VDF-TrFE); ∼3 kHz).