Ultra-resilient multi-layer fluorinated diamond like carbon hydrophobic surfaces.

Seventy percent of global electricity is generated by steam-cycle power plants. A hydrophobic condenser surface within these plants could boost overall cycle efficiency by 2%. In 2022, this enhancement equates to an additional electrical power generation of 1000 TWh annually, or 83% of the global solar electricity production. Furthermore, this efficiency increase reduces CO2 emissions by 460 million tons /year with a decreased use of 2 trillion gallons of cooling water per year. However, the main challenge with hydrophobic surfaces is their poor durability. Here, we show that solid microscale-thick fluorinated diamond-like carbon (F-DLC) possesses mechanical and thermal properties that ensure durability in moist, abrasive, and thermally harsh conditions. The F-DLC coating achieves this without relying on atmospheric interactions, infused lubricants, self-healing strategies, or sacrificial surface designs. Through tailored substrate adhesion and multilayer deposition, we develop a pinhole-free F-DLC coating with low surface energy and comparable Young's modulus to metals. In a three-year steam condensation experiment, the F-DLC coating maintains hydrophobicity, resulting in sustained and improved dropwise condensation on multiple metallic substrates. Our findings provide a promising solution to hydrophobic material fragility and can enhance the sustainability of renewable and non-renewable energy sources.

Advances in micro and nanoengineered surfaces for enhancing boiling and condensation heat transfer: a review.

Liquid-vapor phase change phenomena such as boiling and condensation are processes widely implemented in industrial systems such as power plants, refrigeration and air conditioning systems, desalination plants, water processing installations and thermal management devices due to their enhanced heat transfer capability when compared to single-phase processes. The last decade has seen significant advances in the development and application of micro and nanostructured surfaces to enhance phase change heat transfer. Phase change heat transfer enhancement mechanisms on micro and nanostructures are significantly different from those on conventional surfaces. In this review, we provide a comprehensive summary of the effects of micro and nanostructure morphology and surface chemistry on phase change phenomena. Our review elucidates how various rational designs of micro and nanostructures can be utilized to increase heat flux and heat transfer coefficient in the case of both boiling and condensation at different environmental conditions by manipulating surface wetting and nucleation rate. We also discuss phase change heat transfer performance of liquids having higher surface tension such as water and lower surface tension liquids such as dielectric fluids, hydrocarbons and refrigerants. We discuss the effects of micro/nanostructures on boiling and condensation in both external quiescent and internal flow conditions. The review also outlines limitations of micro/nanostructures and discusses the rational development of structures to mitigate these limitations. We end the review by summarizing recent machine learning approaches for predicting heat transfer performance of micro and nanostructured surfaces in boiling and condensation applications.

Ultrascalable Surface Structuring Strategy of Metal Additively Manufactured Materials for Enhanced Condensation.

Metal additive manufacturing (AM) enables unparalleled design freedom for the development of optimized devices in a plethora of applications. The requirement for the use of nonconventional aluminum alloys such as AlSi10Mg has made the rational micro/nanostructuring of metal AM challenging. Here, the techniques are developed and the fundamental mechanisms governing the micro/nanostructuring of AlSi10Mg, the most common metal AM material, are investigated. A surface structuring technique is rationally devised to form previously unexplored two-tier nanoscale architectures that enable remarkably low adhesion, excellent resilience to condensation flooding, and enhanced liquid-vapor phase transition. Using condensation as a demonstration framework, it is shown that the two-tier nanostructures achieve 6× higher heat transfer coefficient when compared to the best filmwise condensation. The study demonstrates that AM-enabled nanostructuring is optimal for confining droplets while reducing adhesion to facilitate droplet detachment. Extensive benchmarking with past reported data shows that the demonstrated heat transfer enhancement has not been achieved previously under high supersaturation conditions using conventional aluminum, further motivating the need for AM nanostructures. Finally, it has been demonstrated that the synergistic combination of wide AM design freedom and optimal AM nanostructuring method can provide an ultracompact condenser having excellent thermal performance and power density.

Microscale Confinement and Wetting Contrast Enable Enhanced and Tunable Condensation.

Dropwise condensation represents the upper limit of thermal transport efficiency for liquid-to-vapor phase transition. A century of research has focused on promoting dropwise condensation by attempting to overcome limitations associated with thermal resistance and poor surface-modifier durability. Here, we show that condensation in a microscale gap formed by surfaces having a wetting contrast can overcome these limitations. Spontaneous out-of-plane condensate transfer between the contrasting parallel surfaces decouples the nanoscale nucleation behavior, droplet growth dynamics, and shedding processes to enable minimization of thermal resistance and elimination of surface modification. Experiments on pure steam combined with theoretical analysis and numerical simulation confirm the breaking of intrinsic limits to classical condensation and demonstrate a gap-dependent heat-transfer coefficient with up to 240% enhancement compared to dropwise condensation. Our study presents a promising mechanism and technology for compact energy and water applications where high, tunable, gravity-independent, and durable phase-change heat transfer is required.

Tunable and Robust Nanostructuring for Multifunctional Metal Additively Manufactured Interfaces.

Novel processing phenomena coupled with various alloying materials used in metal additive manufacturing (AM) have opened opportunities for the development of previously unexplored micro-/nanostructures. A rationally devised structure nanofabrication strategy of AM surfaces that can tailor the interface morphology and chemistry has the potential for many applications. Here, through an understanding of grain formation mechanisms during AM, we develop a facile method for tuning micro-/nanostructures of one of the most used AM alloys and rationally optimize the morphology for applications requiring low surface adhesion. We demonstrate that optimized AM structures reduce the adhesion of impaling water droplets and significantly delay icing time. The structure can also be altered and optimized for antiflooding jumping-droplet condensation that exhibits significant enhancement in heat transfer performance in comparison to nanostructures formed on conventional Al alloys. In addition to demonstrating the potential of functionalized AM surfaces, this work also provides guidelines for surface-structuring optimization applicable to other AM metals.

Scalable Slippery Omniphobic Covalently Attached Liquid Coatings for Flow Fouling Reduction.

Fouling and accretion have negative impacts on a plethora of processes. To mitigate heterogeneous nucleation of a foulant, lowering the surface energy and reducing surface roughness are desired. Here, we develop a multilayer coating to mitigate solution-based heterogeneous fouling for internal flows. The first layer is a sol-gel silicon dioxide (SiO2) coating, which acts as a corrosion barrier, creates the surface chemistry needed for covalent bonding of the slippery omniphobic covalently attached liquid (SOCAL), and ensures an atomically smooth (<1 nm) interface. The second layer bonded to SiO2 is SOCAL, which further reduces the nucleation rate due to its low surface energy (<12 mJ/m2). The presence of a consistent sol-gel SiO2 base coating to bind to the SOCAL enables application to various metallic substrates. The coating is solid, making it more durable when compared to alternative slippery liquid-infused surfaces (LIS) that suffer from lubricant loss. To demonstrate performance and scalability, we apply our coating to the internal walls of aluminum (Al) tubing and test its fouling performance in a flow-fouling setup with single-phase flow of synthetic seawater. The seawater consists of saturated calcium sulfide (CaSO4), and fouling is characterized in both laminar and turbulent flow regimes (Reynolds numbers 1030 to 9300). Our coating demonstrated a reduction in salt scale fouling by 95% when compared to uncoated Al tubes. Furthermore, we show our coating to withstand turbulent flow conditions, mechanical abrasion loading, and corrosive environments for durations much longer than LIS. Our work demonstrates a coating methodology applicable to a variety of metal substrates and internal passages to achieve antifouling in single-phase flows.

Gas-Phase Temperature Mapping of Evaporating Microdroplets.

Evaporation is a ubiquitous and complex phenomenon of importance to many natural and industrial systems. Evaporation occurs when molecules near the free interface overcome intermolecular attractions with the bulk liquid. As molecules escape the liquid phase, heat is removed, causing evaporative cooling. The influence of evaporative cooling on inducing a temperature difference with the surrounding atmosphere as well as within the liquid is poorly understood. Here, we develop a technique to overcome past difficulties encountered during the study of heterogeneous droplet evaporation by coupling a piezo-driven droplet generation mechanism to a controlled micro-thermocouple to probe microdroplet evaporation. The technique allowed us to probe the gas-phase temperature distribution using a micro-thermocouple (50 µm) in the vicinity of the liquid-vapor interface with high spatial (±10 µm) and temporal (±100 ms) resolution. We experimentally map the temperature gradient formed surrounding sessile water droplets having varying curvature dictated by the apparent advancing contact angle (100° ≲ θ ≲ 165°). The experiments were carried out at temperatures below and above ambient for a range of fixed droplet radii (130 µm ≲ R ≲ 330 µm). Our results provide a primary validation of the centuries-old theoretical framework underpinning heterogeneous droplet evaporation mediated by the working fluid, substrate, and gas thermophysical properties, droplet apparent contact angle, and droplet size. We show that microscale droplets residing on low-thermal-conductivity substrates such as glass absorb up to 8× more heat from the surrounding gas compared to droplets residing on high-thermal-conductivity substrates such as copper. Our work not only develops an experimental understanding of the heat transfer mechanisms governing droplet evaporation but also presents a powerful platform for the study and characterization of liquid-vapor transport at curved interfaces wetting and nonwetting advanced functional surfaces.

Scalable Corrosion-Resistant Coatings for Thermal Applications.

Corrosion of metallic substrates is a problem for a variety of applications. Corrosion can be mitigated with the use of an electrically insulating coating protecting the substrate. Thick millimetric coatings, such as paints, are generally more corrosion-resistant when compared to nanoscale coatings. However, for thermal systems, thick coatings are undesirable due to the resulting decrease in the overall heat transfer stemming from the added coating thermal resistance. Hence, the development of ultrathin (<10 µm) coatings is of great interest. Ultrathin inorganic silicon dioxide (SiO2) coatings applied by sol-gel chemistries or chemical vapor deposition, as well as organic coatings such as Parylene C, have great anticorrosion performance due to their high dielectric breakdown and low moisture permeability. However, their application to arbitrarily shaped metals is difficult or expensive. Here, we develop a sol-gel solution capable of facile and controllable dip coating on arbitrary metals, resulting in a very smooth (<5 nm roughness), thin (∼3 µm), and conformal coating of dense SiO2. To benchmark our material, we compared the corrosion performance with in-house synthesized superhydrophobic aluminum and copper samples, Parylene C-coated substrates, and smooth hydrophobic surfaces functionalized with a hydrophobic self-assembled monolayer. For comparison with state-of-the-art commercial coatings, copper substrates were coated with an organo-ceramic SiO2 layer created by an elevated temperature and atmospheric pressure metal organic chemical vapor deposition process. To characterize corrosion performance, we electrochemically investigated the corrosion resistance of all samples through potentiodynamic polarization studies and electrochemical impedance spectroscopy. To benchmark the coating durability and to demonstrate scalability, we tested internally coated copper tubes in a custom-built corrosion flow loop to simulate realistic working conditions with shear and particulate saltwater flow. The sol-gel and Parylene C coatings demonstrated a 95% decrease in corrosion rate during electrochemical tests. Copper tube weight loss was reduced by 75% for the sol-gel SiO2-coated tubes when seawater was used as the corrosive fluid in the test loop. This work not only demonstrates scalable coating methodologies for applying ultrathin anticorrosion coatings but also develops mechanistic understanding of corrosion mechanisms on a variety of functional surfaces and substrates.