Mechanically driven strategies to improve electromechanical behaviour of printed stretchable electronic systems.

Stretchable electronics promise to extend the application range of conventional electronics by enabling them to keep their electrical functionalities under system deformation. Within this framework, development of printable silver-polymer composite inks is making possible to realize several of the expected applications for stretchable electronics, which range from seamless sensors for human body measurement (e.g. health patches) to conformable injection moulded structural electronics. However, small rigid electric components are often incorporated in these devices to ensure functionality. Under mechanical loading, these rigid elements cause strain concentrations and a general deterioration of the system's electrical performance. This work focuses on different strategies to improve electromechanical performance by investigating the deformation behaviour of soft electronic systems comprising rigid devices through Finite Element analyses. Based on the deformation behaviour of a simple stretchable device under tensile loading, three general strategies were proposed: local component encapsulation, direct component shielding, and strain dispersion. The FE behaviour achieved using these strategies was then compared with the experimental results obtained for each design, highlighting the reasons for their different resistance build-up. Furthermore, crack formation in the conductive tracks was analysed under loading to highlight its link with the evolution of the system electrical performance.

Inkjet printing technology for increasing the I/O density of 3D TSV interposers.

Interposers with through-silicon vias (TSVs) play a key role in the three-dimensional integration and packaging of integrated circuits and microelectromechanical systems. In the current practice of fabricating interposers, solder balls are placed next to the vias; however, this approach requires a large foot print for the input/output (I/O) connections. Therefore, in this study, we investigate the possibility of placing the solder balls directly on top of the vias, thereby enabling a smaller pitch between the solder balls and an increased density of the I/O connections. To reach this goal, inkjet printing (that is, piezo and super inkjet) was used to successfully fill and planarize hollow metal TSVs with a dielectric polymer. The under bump metallization (UBM) pads were also successfully printed with inkjet technology on top of the polymer-filled vias, using either Ag or Au inks. The reliability of the TSV interposers was investigated by a temperature cycling stress test (-40 °C to +125 °C). The stress test showed no impact on DC resistance of the TSVs; however, shrinkage and delamination of the polymer was observed, along with some micro-cracks in the UBM pads. For proof of concept, SnAgCu-based solder balls were jetted on the UBM pads.