Diurnal variation of intraoral pH and temperature.

OBJECTIVE/AIMS: The aim of this study was to measure continuously the intraoral pH and temperature of healthy individuals to investigate their diurnal variations. MATERIALS AND METHODS: Seventeen participants (mean age, 31±9 years) wore a custom-made intraoral appliance fitted with a pH probe and thermocouple for two sets of 24 h, while carrying out normal daily activities including sleep. The continuous changes in intraoral pH and temperature were captured using a sensor placed on the palatal aspect of the upper central incisors. The collected data were categorised into different status (awake and sleep) and periods (morning, afternoon, evening and night). Both quantitative and qualitative analyses were conducted. RESULTS: The intraoral pH change was found to show a distinctive daily rhythm, showing a 12-h interval between maximum (7.73) and minimum (6.6) pH values. The maximum and minimum values were found to repeat after 24 h. The mean pH over 48 h (two sets of 24 h) was found to be 7.27 (±0.74). There was significant difference found in pH when subjects were awake and asleep and different periods during the day (P<0.001). The mean intraoral temperature was 33.99 °C (±4.9), with less distinctive daily rhythm compared with pH. There was a significant difference found in temperature depending on the time of the day, except between morning and afternoon (P=0.78). CONCLUSION: Our results showed that there is a distinctive daily, circadian-like pattern in intraoral pH variation over a 24-h period, which has been considered as one of the risk factors in sleep-related dental diseases.

Drip bloodstain appearance on inclined apparel fabrics: Effect of prior-laundering, fibre content and fabric structure.

The interaction of blood and fabrics is currently a 'hot topic', since the understanding and interpretation of these stains is still in its infancy. A recent simplified perpendicular impact experimental programme considering bloodstains generated on fabrics laid the foundations for understanding more complex scenarios. Blood rarely impacts apparel fabrics perpendicular; therefore a systematic study was conducted to characterise the appearance of drip stains on inclined fabrics. The final drip stain appearance for 45° and 15° impact angles on torso apparel fabrics (100% cotton plain woven, 100% polyester plain woven, a blend of polyester and cotton plain woven and 100% cotton single jersey knit) that had been laundered for six, 26 and 52 cycles prior to testing was investigated. The relationship between drop parameters (height and volume), angle and the stain characteristics (parent stain area, axis 1 and 2 and number of satellite stains) for each fabric was examined using analysis of variance. The appearance of the drip stains on these fabrics was distorted, in comparison to drip stains on hard-smooth surface. Examining the parent stain allowed for classification of stains occurring at an angle, however the same could not be said for the satellite stains produced. All of the dried stains visible on the surface of the fabric were larger than just after the impacting event, indicating within fabric spreading of blood due to capillary force (wicking). The cotton-containing fabrics spread the blood within the fabrics in all directions along the stain's circumference, while spreading within the polyester plain woven fabric occurred in only the weft (width of the fabric) and warp (length) directions. Laundering affected the formation of bloodstain on the blend plain woven fabric at both impact angles, although not all characteristics were significantly affected for the three impact conditions considered. The bloodstain characteristics varied due to the fibre content and fabric structure for both impact angles investigated. It is therefore necessary to consider the age of the fabric (which is fabric specific), the fibre type (including blends) and the fabric structure, before interpreting bloodstain patterns. An understanding of this simplified inclined drip stain interaction has been investigated to generate a basis for more complex interactions, such as spatter bloodstains.

Biomechanical investigation of impact induced rib fractures of a porcine infant surrogate model.

This study investigated the structural, biomechanical and fractographic features of rib fractures in a piglet model, to test the hypothesis that fist impact, apart from thoracic squeezing, may result in lateral costal fractures as observed in abused infants. A mechanical fist with an accelerometer was constructed and fixed to a custom jig. Twenty stillborn piglets in the supine position were impacted on the thoracic cage. The resultant force versus time curves from the accelerometer data showed a number of steps indicative of rib fracture. The correlation between impact force and number of fractures was statistically significant (Pearson׳s r=0.528). Of the fractures visualized, 15 completely pierced the parietal pleura of the thoracic wall, and 5 had butterfly fracture patterning. Scanning electron microscopy showed complete bone fractures, at the zone of impact, were normal to the axis of the ribs. Incomplete vertical fractures, with bifurcation, occurred on the periphery of the contact zone. This work suggests the mechanism of rib failure during a fist impact is typical of the transverse fracture pattern in the anterolateral region associated with cases of non-accidental rib injury. The impact events investigated have a velocity of ~2-3m/s, approximately 2×10(4) times faster than previous quasi-static axial and bending tests. While squeezing the infantile may induce buckle fractures in the anterior as well as posterior region of the highly flexible bones, a fist punch impact event may result in anterolateral transverse fractures. Hence, these findings suggest that the presence of anterolateral rib fractures may result from impact rather than manual compression.

Enamel ultrastructure of fossil and modern pinnipeds: evaluating hypotheses of feeding adaptations in the extinct walrus Pelagiarctos.

This study aimed to assess the enamel ultrastructure in modern otariid pinnipeds and in the extinct walrus Pelagiarctos. Teeth of the New Zealand fur seal (Arctocephalus forsteri), sea lion (Phocarctos hookeri), and fossil walrus Pelagiarctos thomasi were embedded, sectioned, etched, and analyzed via scanning electron microscopy. The enamel of NZ otariids and Pelagiarctos was prismatic and moderately thick, measuring 150-450 µm on average. It consisted of transversely oriented Hunter-Schreger bands (HSBs) from the enamel-dentine junction (EDJ) to near the outer surface, where it faded into prismless enamel less than 10 µm thick. The width of HSB was variable and averaged between 6 and 10 prisms, and they presented an undulating course both in longitudinal and cross sections. The overall organization of the enamel was similar in all teeth sampled; however, the enamel was thicker in canines and postcanines than in incisors. The crowns of all teeth sampled were uniformly covered by enamel; however, the grooved incisors lacked an enamel cover on the posterior side of the buccal face. Large tubules and tuft-like structures were seen at the EDJ. HSB enamel as well as tubules and tufts at the EDJ suggest increased occlusal loads during feeding, a biomechanical adaptation to avoid enamel cracking and failure. Despite overall simplification in tooth morphology and reduced mastication, the fossil and modern pinnipeds analyzed here retained the complex undulating HSB structure of other fossils and living Carnivora, while other marine mammals such as cetaceans developed simplified radial enamel.

Morphometric analysis of cervical vertebrae in relation to mandibular growth.

INTRODUCTION: Cervical vertebral maturation (CVM) methods have been criticized because of their subjective nature. The aims of this study were (1) to analyze the morphometric changes in the outline of the second to fourth cervical vertebrae with growth and (2) to test the validity of the CVM method for determining the mandibular growth peak. METHODS: Lateral cephalograms of 25 participants from ages 10 to 16 years were acquired from the Burlington Growth Study, and the CVM stage was qualitatively determined. Mandibular and cervical vertebral semilandmarks were then digitized, and point distribution models were used to describe the morphometric templates of the vertebrae in relation to chronologic age and the timing of peak mandibular growth. Mixed model analysis was used to determine the relationship between mandibular length, sex, CVM stage, and chronologic age. RESULTS: Morphometric changes of the second to fourth cervical vertebrae during growth were consistent with the CVM descriptions. However, mandibular length changes were not significantly associated with CVM stages after adjusting for chronologic age. Morphometric templates of vertebral shapes before and during the mandibular growth peak were similar, with changes detectable only after the growth peak had passed. Morphometric vertebral shape changes varied between the sexes. CONCLUSIONS: Morphometric changes of the cervical vertebrae and the CVM method could not accurately identify the mandibular growth peak.

Gunshot residue preservation in seawater.

Little is known about the persistence of gunshot residue (GSR) in soft tissue and bones during decomposition in marine environments. For a better understanding, qualitative and quantitative data were obtained on GSR retention on soft tissue and bony gunshot wounds (GSWs). A quantity of 36 fleshed and 36 defleshed bovine ribs were shot at contact range with 0.22 calibre hollow point ammunition using a Stirling 0.22 calibre long rifle. Bone specimens in triplicate were placed in three environments: submerged, intertidal and in supralittoral zone. Sets of triplicates were recovered on day 3, 10, 24 and 38, and analysed with scanning electron microscopy with energy dispersive X-ray spectrometry (SEM-EDX), and inductive coupled plasma mass spectrometry (ICP-MS). The SEM-EDX recorded GSR-indicative particles surrounding the bullet entrance on all bone types (fleshed and defleshed) in all environments throughout the study. GSR-unique particles were only detected on the supralittoral bones. The ICP-MS analysis showed faster GSR loss on submerged than intertidal and supralittoral defleshed specimens. Fleshed specimens showed a faster GSR loss on intertidal than submerged and supralittoral specimens. In conclusion, the GSR disappeared faster from submerged and intertidal than non-submerged specimens. The difference of detection of GSR between analysed specimens (defleshed versus fleshed) disappeared upon defleshing. This study highlights the potential of finding evidence of GSR in a submerged body and the potential of microscopic and analytical methods for examining suspected GSW in highly decomposed bodies in marine habitats.

Systematic investigation of drip stains on apparel fabrics: The effects of prior-laundering, fibre content and fabric structure on final stain appearance.

Bloodstain pattern analysis is the investigation of blood deposited at crime scenes and the interpretation of that pattern. The surface that the blood gets deposited onto could distort the appearance of the bloodstain. The interaction of blood and apparel fabrics is in its infancy, but the interaction of liquids and apparel fabrics has been well documented and investigated in the field of textile science (e.g. the processes of wetting and wicking of fluids on fibres, yarns and fabrics). A systematic study on the final appearance of drip stains on torso apparel fabrics (100% cotton plain woven, 100% polyester plain woven, blend of polyester and cotton plain woven and 100% cotton single jersey knit) that had been laundered for six, 26 and 52 cycles prior to testing was investigated in the paper. The relationship between drop velocity (1.66±0.50m/s, 4.07±0.03m/s, 5.34±0.18m/s) and the stain characteristics (parent stain area, axes 1 and 2 and number of satellite stains) for each fabric was examined using analysis of variance. The experimental design and effect of storing blood were investigated on a reference sample, which indicated that the day (up to five days) at which the drops were generated did not affect the bloodstain. The effect of prior-laundering (six, 26 and 52 laundering cycles), fibre content (cotton vs. polyester vs. blend) and fabric structure (plain woven vs. single jersey knit) on the final appearance of the bloodstain were investigated. Distortion in the bloodstains produced on non-laundered fabrics indicated the importance of laundering fabrics to remove finishing treatments before conducting bloodstain experiments. For laundered fabrics, both the cotton fabrics and the blend had a circular to oval stain appearance, while the polyester fabric had a circular appearance with evidence of spread along the warp and weft yarns, which resulted in square-like stains at the lowest drop velocity. A significant (p<0.001) increase in the stain size on laundered blend fabric was identified. Bloodstain characteristics varied due to fibre content (p<0.001) and fabric structure (p<0.001). Blood on polyester fabric, after impact, primarily moved due to capillary force and wicking of the blood along the fibres/yarns, while for the cotton fabrics wicking was accompanied by movement of blood into the fibres/yarns. This study highlights the importance for forensic analysts of apparel evidence to consider the age, the fibre type and the fabric structure before interpreting bloodstain patterns.

Enamel ultrastructure in fossil cetaceans (Cetacea: Archaeoceti and Odontoceti).

The transition from terrestrial ancestry to a fully pelagic life profoundly altered the body systems of cetaceans, with extreme morphological changes in the skull and feeding apparatus. The Oligocene Epoch was a crucial time in the evolution of cetaceans when the ancestors of modern whales and dolphins (Neoceti) underwent major diversification, but details of dental structure and evolution are poorly known for the archaeocete-neocete transition. We report the morphology of teeth and ultrastructure of enamel in archaeocetes, and fossil platanistoids and delphinoids, ranging from late Oligocene (Waitaki Valley, New Zealand) to Pliocene (Caldera, Chile). Teeth were embedded in epoxy resin, sectioned in cross and longitudinal planes, polished, etched, and coated with gold palladium for scanning electron microscopy (SEM) observation. SEM images showed that in archaeocetes, squalodontids and Prosqualodon (taxa with heterodont and nonpolydont/limited polydont teeth), the inner enamel was organized in Hunter-Schreger bands (HSB) with an outer layer of radial enamel. This is a common pattern in most large-bodied mammals and it is regarded as a biomechanical adaptation related to food processing and crack resistance. Fossil Otekaikea sp. and delphinoids, which were polydont and homodont, showed a simpler structure, with inner radial and outer prismless enamel. Radial enamel is regarded as more wear-resistant and has been retained in several mammalian taxa in which opposing tooth surfaces slide over each other. These observations suggest that the transition from a heterodont and nonpolydont/limited polydont dentition in archaeocetes and early odontocetes, to homodont and polydont teeth in crownward odontocetes, was also linked to a marked simplification in the enamel Schmelzmuster. These patterns probably reflect functional shifts in food processing from shear-and-mastication in archaeocetes and early odontocetes, to pierce-and-grasp occlusion in crownward odontocetes, with the implication of less demanding feeding biomechanics as seen in most extant odontocetes.

Development of a skull/brain model for military wound ballistics studies.

Reports on penetrating ballistic head injuries in the literature are dominated by case studies of suicides; the penetrating ammunition usually being .22 rimfire or shotgun. The dominating cause of injuries in modern warfare is fragmentation and hence, this is the primary threat that military helmets protect the brain from. When helmets are perforated, this is usually by bullets. In combat, 20% of penetrating injuries occur to the head and its wounding accounts for 50% of combat deaths. A number of head simulants are described in the academic literature, in ballistic test methods for helmets (including measurement of behind helmet blunt trauma, BHBT) and in the 'open' and 'closed' government literature of several nations. The majority of these models are not anatomically correct and are not assessed with high-velocity rifle ammunition. In this article, an anatomically correct 'skull' (manufactured from polyurethane) and 'brain' (manufactured from 10%, by mass, gelatine) model for use in military wound ballistic studies is described. Filling the cranium completely with gelatine resulted in a similar 'skull' fracture pattern as an anatomically correct 'brain' combined with a representation of cerebrospinal fluid. In particular, posterior cranial fossa and occipital fractures and brain ejection were observed. This pattern of injury compared favourably to reported case studies of actual incidents in the literature.

Soft and Hard Tissue Response to Zirconia versus Titanium One-Piece Implants Placed in Alveolar and Palatal Sites: A Randomized Control Trial.

BACKGROUND: Titanium (Ti) implants have been used in the last four decades to replace missing teeth. Alternatives to Ti such as zirconia (Zr) may offer aesthetic advantages and be more acceptable to patients and clinicians concerned about Ti allergy but must show equivalent biological acceptability to Ti. PURPOSE: The research aimed to investigate soft and hard tissue response to Ti and Zr implants in edentulous patients. MATERIALS AND METHODS: The research included 24 participants (Ti = 12, Zr = 12) restored with one-piece ball-abutment implants to support overdentures. Participants received four maxillary implants (two in the premolar alveolus, one off center in the alveolar midline, and one wide-diameter implant in the anterior median palate) and three mandibular implants (one in the midline and bilateral posterior implants). RESULTS: Success rates for both Ti and Zr implants were low, 67.9% for all alveolar implants and a survival rate of 50.0% for the palatal implants. Only 11 (52.4%) of 21 palatal implants survived the follow-up period. Peri-implant health was equivalent for Ti and Zr implants and showed no statistically significant changes from loading to the 1-year follow-up. Statistically significant differences were noted in radiographic bone level between Ti and Zr implants (p = .02), with Zr showing greater bone loss. CONCLUSIONS: Although the failure rates with the one-piece Zr implants were higher than with the Ti ones, suggesting that the former's clinical usage as in this study cannot be recommended, it should be borne in mind that the fault may also lie with the novel prosthodontic design which was used.

Micromechanical characterization of prismless enamel in the tuatara, Sphenodon punctatus.

Dental enamel - a naturally occurring biocomposite of mineral and protein - has evolved from a simple prismless to an advanced prismatic structure over millions of years. Exploring the mechanical function of its structural features with differing characteristics is of great importance for evolutionary developmental studies as well as for material scientists seeking to model the mechanical performance of biological materials. In this study, mechanical properties of prismless tuatara Sphenodon punctatus enamel were characterized. Using micro-cantilever bending samples the fracture strength and elastic modulus were found to be 640 ± 87 MPa and 42 ± 6 GPa, respectively in the orientation parallel to the crystallite long axis, which decreased in the orthogonal direction. The intrinsic fracture toughness of tuatara enamel ranged from 0.21 MPa m(1/2) and 0.32 MPa m(1/2). These values correspond to the lower limit of the range of values observed in prismatic enamel at the hierarchical level 1.

Does contextual information bias bitemark comparisons?

A growing body of research suggests that the interpretation of fingerprint evidence is open to contextual bias. While there has been suggestion in the literature that the same might apply to bitemarks - a form of identification evidence in which a degree of contextual information during the comparison phase is generally unavoidable - there have so far been no empirical studies to test this assertion. We explored dental and non-dental students' ability to state whether two bitemarks matched, while manipulating task ambiguity and the presence and emotional intensity of additional contextual information. Provision of the contextual information influenced participants' decisions on the ambiguous bitemarks. Interestingly, when participants were presented with highly emotional images and subliminally primed with the words 'same' and 'guilty', they made fewer matches relative to our control condition. Dental experience also played a role in decision-making, with dental students making more matches as the experiment progressed, regardless of context or task ambiguity. We discuss ways that this exploratory research can be extended in future studies.

The deer femur--a morphological and biomechanical animal model of the human femur.

BACKGROUND: The need for continued refinement of animal models in orthopaedic studies persists despite decades of research. OBJECTIVE: This study investigates the merits of deer bone in comparison to the more commonly used pig and sheep bone as an animal model for the human femur. METHOD: A morphological and biomechanical comparison of deer, pig and sheep rear femurs to those of the human femur is presented. Morphological parameters measured include bone length, cortical and medullary diaphyseal diameters, cortical thickness, cortical cross-sectional area and bone density along the diaphysis. Biomechanical tests included whole-bone four-point flexure tests to determine the bending stiffness (N/mm), Young's modulus of bending (GPa), and ultimate strength in bending (MPa). In addition torsional stiffness (Nm/degree) as well as mid-diaphyseal cortical compressive elastic modulus (GPa) and strength (MPa) is investigated. RESULTS: On average, deer bone was found to be the least dissimilar from human femur. However, no single bone type consistently resembled the human femur. CONCLUSION: Deer femora should be considered a suitable animal model for the human femur.

Morphometric growth relationships of the immature human mandible and tongue.

The masticatory apparatus is a highly adaptive musculoskeletal complex comprising several relatively independent structural components, which assist in functions including feeding and breathing. We hypothesized that the tongue is elemental in the maintenance of normal ontogeny of the mandible and in its post-natal growth and development, and tested this using a morphometric approach. We assessed tongue and mandibular measurements in 174 (97 male) human cadavers. Landmark lingual and mandibular data were gathered individuals aged between 20 gestational weeks and 3 yr postnatal. In this analysis, geometric morphometrics assisted in visualizing the morphometrical growth changes in the mandible and tongue. A linear correlation in conjunction with principal component analysis further visualized the growth relationship between these structures. We found that the growth of the tongue and mandible were intrinsically linked in size and shape between 20 gestational weeks and 24 months postnatal. However, the mandible continued to change in shape and size into the 3rd yr of life, whereas the tongue only increased in size over this same period of time. These findings provide valuable insights into the allometric growth relationship between these structures, potentially assisting the clinician in predicting the behaviour of these structures in the assessment of malocclusions.

The effect of incremental lower lip advancement on oral pressure and EMG activity of the lower lip.

OBJECTIVES: During orthodontic arch expansion, the teeth are displaced against the perioral soft tissues. This can affect the equilibrium of forces that are thought to act on teeth, with consequent implications for long-term stability. The aim of this study was to investigate the effect of incremental lower lip advancement on intraoral pressure and electromyographic (EMG) activity of the lower lip. MATERIALS AND METHODS: Intraoral pressure and EMG activity was measured in 10 participants (2 males, 8 females; 22 years ± 7 months) as the lower lip was incrementally advanced using three custom-made vacuum-formed stents of differing labial thicknesses (0.5, 2.5, and 4.5 mm). A task paradigm including at rest recordings and maximal voluntary contraction was completed for each tray. RESULTS: Resting lip pressure generated increased as the lower lip was advanced (P < 0.001). The EMG activity of the lower lip increased significantly (P < 0.001) only once the lip was advanced from 2.5 to 4.5 mm. For the pressure recordings, the response to incremental lip advancement showed considerable individual variation. CONCLUSIONS: These findings suggest that the initial pressure increase on the lower incisors was mostly likely due to the inherent viscoelastic properties of the lower lip, while the pressure increase between the 2.5 and 4.5 mm advancement was due to increased muscle activity. Each individual also responded to lower lip advancement in a different yet subject-specific manner.

Could the median-palate accommodate wide-bodied implants in order to support maxillary over-dentures? A radiomorphometric study of human cadavers.

INTRODUCTION: Atrophy of the alveolar bone is an irreversible multifactorial phenomenon, the rate of which varies between individuals and between the jaws. This atrophy of the alveolar ridges presents severe limitations for the oral rehabilitation of the edentulous patients and poses a clinical challenge to the prosthodontists and implant surgeons. The present research aimed to investigate whether the median-palate of elderly edentulous subjects is anatomically suitable for implant placement. MATERIALS AND METHODS: A total of 32 samples were harvested from the maxillae of 16 human cadavers. One dentate male subject was included for contrast. Bone quality and quantity were analysed at two regions: the median-palate and the edentulous maxillary alveolar ridge. Samples were scanned through micro-CT, and the region of analysis (ROA) identified and dissected. Bone volume to tissue volume ratio (%BV/TV), trabecular thickness (Tb.Th), trabecular number (Tb.N), trabecular separation (Tb.Sp) and trabecular bone pattern factor (Tb.Pf) were evaluated for the two regions using Skyscan CTAn(®). RESULTS: The results of bone volume fraction obtained from CTAn(®) of the median-palatal region show higher values than the respective premolar sites in 12 of 15 (80%) edentulous samples. However, this difference was statistically non-significant (P = 0.06). Similarly, the trabecular number for 10 of 15 samples (66.6%) from the median-palate shows greater values than the respective premolar site (P = 0.07). Trabecular thickness of 10 of 15 (66.6%) premolar samples is larger than in the median-palatal region. However, these differences were also statistically non-significant (P = 0.25). Statistically significant difference (P = 0.04) was found between the Tb.Sp values of the two regions. CONCLUSION: The results indicate that the anterior median-palate is structurally better than their respective maxillary premolar region in elderly edentulous persons, and an implant can be placed to anchor an overdenture. The best site for a wide-body implant was established to be 6-8 mm posterior to the incisive foramen in elderly edentulous patients.

Damage to apparel layers and underlying tissue due to hand-gun bullets.

Ballistic damage to the clothing of victims of gunshot wounds to the chest can provide useful forensic evidence. Anyone shot in the torso will usually be wearing clothing which will be damaged by the penetrating impact event and can reportedly be the source of some of the debris in the wound. Minimal research has previously been reported regarding the effect of bullets on apparel fabrics and underlying tissue. This paper examines the effect of ammunition (9 mm full metal jacket [FMJ] DM11 A1B2, 8.0 g; and soft point flat nose Remington R357M3, 10.2 g) on clothing layers that cover the torso (T-shirt, T-shirt plus hoodie, T-shirt plus denim jacket) and underlying structures represented by porcine thoracic wall (skin, underlying tissue, ribs). Impacts were recorded using a Phantom V12 high speed camera. Ejected bone debris was collected before wound tracts were dissected and measured; any debris found was recovered for further analysis. Size and mass of bony debris was recorded; fibre debris recovered from the wound and impact damage to fabrics were imaged using scanning electron microscopy (SEM). Remington R357M3 ammunition was characteristically associated with stellate fabric damage; individual fibres were less likely to show mushrooming. In contrast, 9 mm FMJ ammunition resulted in punch-out damage to fabric layers, with mushrooming of individual fibres being more common. Entry wound sizes were similar for both types of ammunition and smaller than the diameter of the bullet that caused them. In this work, the Remington R357M3 ammunition resulted in larger exit wounds due to the bullet construction which mushroomed. That fabric coverings did not affect the amount of bony debris produced is interesting, particularly given there was some evidence that apparel layers affected the size of the wound. Recent work has suggested that denim (representative of jeans) can exacerbate wounding caused by high-velocity bullet impacts to the thigh when the bullet does not impact the femur. That more bony debris was caused by Remington R357M3 rather than 9 mm FMJ ammunition was not surprising given the relative constructions of these two bullets, and is of interest to medical practitioners.

A comparison between rib fracture patterns in peri- and post-mortem compressive injury in a piglet model.

OBJECTIVES: Forensic biomechanics is increasingly being used to explain how observed injuries occur. We studied infant rib fractures from a biomechanical and morphological perspective using a porcine model. METHODS: We used 24, 6th ribs of one day old domestic pigs Sus scrofa, divided into three groups, desiccated (representing post-mortem trauma), fresh ribs with intact periosteum (representing peri-mortem trauma) and those stored at -20°C. Two experiments were designed to study their biomechanical behaviour fracture morphology: ribs were axially compressed and subjected to four-point bending in an Instron 3339 fitted with custom jigs. Morphoscopic analysis of resultant fractures consisted of standard optical methods, micro-CT (µCT) and Scanning Electron Microscopy (SEM). RESULTS: During axial compression fresh ribs did not fracture because of energy absorption capabilities of their soft and fluidic components. In flexure tests, dry ribs showed typical elastic-brittle behaviour with long linear load-extension curves, followed by short non-linear elastic (hyperelastic) behaviour and brittle fracture. Fresh ribs showed initial linear-elastic behaviour, followed by strain softening and visco-plastic responses. During the course of loading, dry bone showed minimal observable damage prior to the onset of unstable fracture. Frozen then thawed bone showed similar patterns to fresh bone. Morphologically, fresh ribs showed extensive periosteal damage to the tensile surface with areas of collagen fibre pull-out along the tensile surface. While all dry ribs fractured precipitously, with associated fibre pull-out, the latter feature was absent in thawed ribs. CONCLUSIONS: Our study highlights the fact that under controlled loading, fresh piglet ribs (representing perimortem trauma) did not fracture through bone, but was associated with periosteal tearing. These results suggest firstly, that complete lateral rib fracture in infants may in fact not result from pure compression as has been previously assumed; and secondly, that freezing of bone during storage may affect its fracture behaviour.

The use of lithium as a marker for the retention of liquids in the oral cavity after rinsing.

OBJECTIVE: The aim of this study was to validate the use of lithium as a marker to indicate the retention of simple liquids in the oral cavity and use this to determine how much liquid is retained in the oral cavity following 30 s of rinsing. MATERIALS AND METHODS: This is a validation study in which saliva was spiked with known concentrations of lithium. Twenty healthy participants then rinsed their mouths with either water or a 1 % w/v carboxymethylcellulose (CMC) solution for 30 s before expectorating into a collection cup. Total volume and concentration of lithium in the expectorant were then measured, and the percentage of liquid retained was calculated. RESULTS: The mean amount of liquid retained was 10.4 ± 4.7 % following rinsing with water and 15.3 ± 4.1 % following rinsing with 1 % w/v CMC solution. This difference was significant (p < 0.01). CONCLUSIONS: Lithium was useful as a marker for the retention of liquids in the oral cavity, and a value for the amount of water and 1 % w/v CMC solution remaining in the oral cavity following a 30-s rinse was established. CLINICAL RELEVANCE: The present study quantifies the retention of simple fluids in the oral cavity, validating a technique that may be applied to more complex fluids such as mouth rinses. Further, the application of this method to specific population groups such as those with severe xerostomia may assist in developing effective saliva substitutes.