Longevity of coal waste for controlling cadmium-contaminated groundwater considering groundwater velocity.

Coal waste composed of naturally occurring minerals is applicable as a reactive medium to permeable reactive barriers due to its reactivity to heavy metals. In this study, we evaluated the longevity of coal waste as PRB media to control heavy metal-contaminated groundwater considering variable groundwater velocity. Breakthrough experiments were conducted using coal waste-filled column by injecting artificial groundwater, 10 mg/L of cadmium solution. The artificial groundwater was fed to the column at different flow rates to mimic a wide range of porewater velocities in the saturated zone. The reaction between cadmium breakthrough curves was analyzed using a two-site nonequilibrium sorption model. The cadmium breakthrough curves showed a significant retardation, which increased with decreasing porewater velocity. The greater the retardation, the longer the longevity of coal waste could be expected. The greater retardation under a slower velocity environment was due to the higher fraction of equilibrium reaction. The nonequilibrium reaction parameters could be functionalized with respect to the porewater velocity. The simulation of contaminant transport using the reaction parameters could be used as a method to evaluate the longevity of the pollution-blocking material in an underground environment.

Applicability of weathered coal waste as a reactive material to prevent the spread of inorganic contaminants in groundwater.

It is necessary to determine an environmentally friendly method of reusing the vast amount of coal waste that is generated during coal preparation. This study evaluates the applicability of using weathered coal waste in a permeable reactive barrier to prevent groundwater contamination. Coal waste, with different weathering degrees, was obtained from two coal mining sites in South Jeolla Province, Korea. The reactivities of the coal waste with inorganic contaminants, such as copper, cadmium, and arsenic, were examined in batch and column experiments. The batch experiment results indicate that the coal waste removal efficiencies of copper (99.8%) and cadmium (95.4%) were higher than those of arsenic (71.0%). The maximum adsorption capacities of coal waste for copper, cadmium, and arsenic calculated from the Langmuir isotherm model were 4.440 mg/g, 3.660 mg/g, and 0.718 mg/g, respectively. The equilibrium of adsorption was attained within 8 h. The column experiment results reveal that the coal waste effectively removed inorganic contaminants under flow-through conditions. Faster breakthrough times were observed in single solute system (As(V) = 19.3 PV, Cu(II) = 47.6 PV) compared with binary solute system (As(V) = 27.8 PV, Cu(II) = 65.4 PV). To confirm the applicability of using coal waste in a groundwater environment, its decontamination ability was analyzed at low concentrations and under various pH conditions. To examine the potential ecological risks in the subsurface environment, a test to determine acute toxicity to Daphnia magna and a toxic characteristic leaching procedure (TCLP) test were conducted. The coal waste was found to satisfy appropriate standards. The acute toxicity test also confirmed the ecological safety of using coal waste in a groundwater environment. The acceptably high capacity and fast kinetics of inorganic contaminant sorption by the coal waste indicate it could potentially be employed as a reactive material. The recycling and application of this abundant waste material will contribute to solving both coal waste disposal and water pollution problems.

Effects of gamma irradiation on the measurement of hepatitis B virus DNA in dentin harvested from chronically infected patients.

BACKGROUND: The manufacturing of the demineralized dentin matrix (DDM) has been proven to extensively reduce the presence of human hepatitis B viral DNA (HBV DNA). This study measured and compared HBV DNA in fresh dentin to that in gamma radiation (GR)-sterilized dentin extracted from HBV-infected patients. The application of GR as a means of terminal sterilization is hypothesized to inactivate or eliminate HBV within the dentin matrix. METHODS: Dentin from 18 HBV-infected patients was collected and divided into three fragments. The first fragment was unaltered and used as the control group; the remaining two fragments were sterilized with gamma radiation doses of 15 or 25 kGy. DNA was extracted and purified from each fresh (control), and the GR-sterilized (experimental) dentin specimen and HBV DNA copy numbers were evaluated on the basis of the real-time polymerase chain reaction. The copy numbers were used to assess GR efficacy as a means of terminal sterilization for HBV inactivation or elimination. RESULTS: HBV DNA was detected in 66.67% of the fresh dentin specimens. The differences in HBV DNA levels between the fresh dentin and the GR-sterilized dentin were confirmed by the Wilcoxon signed-rank test for the doses of 15 and 25 kGy with P value of 0.012 and 0.010, respectively. Among the twelve HBV-DNA-positive fresh dentin samples, HBV DNA persisted in eleven after GR sterilization, yet the copy number was reduced to <10 (except for a single sample within each experimental group). CONCLUSIONS: The results suggest that 15 and 25 kGy of GR significantly reduced the HBV DNA levels in the fresh dentin matrix. Expansion of the possible clinical applications of allogenic grafts with the irradiated DDM will require additional studies, including validation of viral load inactivation to prevent infectious transmission and examination of GR exposure effects on the osteoinductivity of the matrix.

Maxillary Sinus Augmentation With Calcium Phosphate Double-Coated Anorganic Bovine Bone: Comparative Multicenter Randomized Clinical Trial With Histological and Radiographic Evaluation.

PURPOSE: The purpose of this study was to evaluate the clinical, histological and radiographic outcomes of the calcium phosphate double-coated anorganic bovine bone (InduCera; Oscotec Inc., Seongnam, Gyeonggi, Republic of Korea) compared with that of anorganic bovine bone (Bio-Oss; Geistlich Biomaterials, Wolhusen, Switzerland) in maxillary sinus augmentation, prospectively. PATIENTS AND METHODS: Twenty-eight sinuses in 25 patients (3 bilateral) with vertical alveolar bone height from 2 to 5 mm were included in this study. The maxillary sinus was augmented with InduCera or Bio-Oss, followed by a healing period of 6 months. Trephine cores were obtained for histomorphometric evaluation with the implant placement. Cone-beam computed tomography (CBCT) scans were taken at 1 week and 6 months after sinus augmentation. RESULTS: The graft sites were healed without any notable complications in both groups. In histomorphometric analysis, the area of the newly formed bone was measured as 21.37 ± 8.87% for InduCera and 23.02 ± 5.88% for Bio-Oss, with no significant differences. Radiographically, no statistically significant differences were calculated between the groups in bone height at baseline, the height of bone augmentation, the final alveolar bone height (alveolar bone height + augmented height) after 6 months in panoramic radiograph. There were also no significant differences in the shrinkage rate of the grafted area volume in CBCT. CONCLUSION: Although calcium phosphate double-coated anorganic bovine bone showed no additional effect compared with anorganic bovine bone from a histological and radiographical point of view, it could be used as the bone graft material in maxillary sinus augmentation.

Biocompatibility and Biocorrosion of Hydroxyapatite-Coated Magnesium Plate: Animal Experiment.

Magnesium (Mg) has the advantage of being resorbed in vivo, but its resorption rate is difficult to control. With uncontrolled resorption, Magnesium as a bone fixation material has minimal clinical value. During resorption not only is the strength rapidly weakened, but rapid formation of metabolite also occurs. In order to overcome these disadvantages, hydroxyapatite (HA) surface coating of pure magnesium plate was attempted in this study. Magnesium plates were inserted above the frontal bone of Sprague-Dawley rats in both the control group (Bare-Mg group) and the experimental group (HA-Mg group). The presence of inflammation, infection, hydrogen gas formation, wound dehiscence, and/or plate exposure was observed, blood tests were performed, and the resorption rate and tensile strength of the retrieved metal plates were measured. The HA-Mg group showed no gas formation or plate exposure until week 12. However, the Bare-Mg group showed consistent gas formation and plate exposure beginning in week 2. WBC (White Blood Cell), BUN (Blood Urea Nitrogen), Creatinine, and serum magnesium concentration levels were within normal range in both groups. AST (Aspartate Aminotransferase) and ALT (Alanine Aminotransferase) values, however, were above normal range in some animals of both groups. The HA-Mg group showed statistically significant advantage in resistance to degradation compared to the Bare-Mg group in weeks 2, 4, 6, 8, and 12. Degradation of HA-Mg plates proceeded after week 12. Coating magnesium plates with hydroxyapatite may be a viable method to maintain their strength long enough to allow bony healing and to control the resorption rate during the initial period.

Maximal strength and endurance scores of the tongue, lip, and cheek in healthy, normal Koreans.

OBJECTIVES: The purpose of this study was to establish normative data for healthy Korean adults by measuring the maximal strength and endurance scores of the tongue, lip, and cheek, and to examine correlations between these measurements. MATERIALS AND METHODS: This study included 120 subjects that were divided into three groups according to age: young (20-39 years), middle-aged (40-59 years), and older (over 60 years); and by gender. Measurements were taken using the Iowa Oral Performance Instrument (IOPI). RESULTS: The mean maximal tongue strengths were as follows: young men (46.7±10.2 kPa) and women (32.1±7.9 kPa), middle-aged men (40.9±9.3 kPa) and women (36.9±8.6 kPa), and older men (35.2±9.0 kPa) and women (34.5±6.9 kPa). The mean tongue endurance scores were: young men (28.8±12.6 seconds) and women (20.8±13.5 seconds), middle-aged men (17.0±8.5 seconds) and women (15.3±5.2 seconds), and older men (15.8±6.7 seconds) and women (17.9±8.1 seconds). The mean maximal lip strengths were: young men (11.6±3.0 kPa) and women (11.4±3.8 kPa), middle-aged men (11.4±4.2 kPa) and women (11.1±5.1 kPa), and older men (14.5±3.9 kPa) and women (11.7±2.6 kPa). The mean lip endurance scores were: young men (41.1±23.9 seconds) and women (22.4±21.7 seconds), middle-aged men (24.3±10.3 seconds) and women (30.5±13.4 seconds), and older men (24.9±11.0 seconds) and women (12.8±7.6 seconds). The mean maximal cheek strengths were: young men (24.5±4.6 kPa) and women (20.5±4.3 kPa), middle-aged men (25.2±6.4 kPa) and women (21.2±5.5 kPa), and older men (22.4±5.3 kPa) and women (18.0±4.8 kPa). The mean cheek endurance scores were: young men (47.8±24.4 seconds) and women (43.9±25.0 seconds), middle-aged men (27.3±11.3 seconds) and women (20.0±14.6 seconds), and older men (21.7±14.5 seconds) and women (17.2±11.4 seconds). CONCLUSION: The data collected in this study will provide an important database of standardized measurements for maximal strength and endurance scores of the tongue, lip and cheek in healthy, normal Koreans.

Adenovirus vector-mediated ex vivo gene transfer of brain-derived neurotrophic factor (BDNF) tohuman umbilical cord blood-derived mesenchymal stem cells (UCB-MSCs) promotescrush-injured rat sciatic nerve regeneration.

This study was designed toinvestigate the efficacy of adenovirus vector-mediated brain-derived neurotrophic factor (BDNF) ex vivo gene transfer to human umbilical cord blood-derived mesenchymal stem cells (UCB-MSCs) in a rat sciatic nerve crush injury model. BDNF protein and mRNA expression after infection was checked through an enzyme-linked immunosorbent assay (ELISA) and quantitative real-time polymerase chain reaction (qRT-PCR). Male Sprague-Dawley rats (200-250g, 6 weeks old) were distributed into threegroups (n=20 each): the control group, UCB-MSC group, and BDNF-adenovirus infected UCB-MSC (BDNF-Ad+UCB-MSC) group. UCB-MSCs (1×106cells/10µl/rat) or BDNF-Ad+UCB-MSCs (1×106cells/10µl/rat)were transplantedinto the rats at the crush site immediately after sciatic nerve injury. Cell tracking was done with PKH26-labeled UCB-MSCs and BDNF-Ad+UCB-MSCs (1×106cells/10µl/rat). The rats were monitored for 4 weeks post-surgery. Results showed that expression of BDNF at both the protein and mRNA levels was higher inthe BDNF-Ad+UCB-MSC group compared to theUCB-MSC group in vitro.Moreover, BDNF mRNA expression was higher in both UCB-MSC group and BDNF-Ad+ UCB-MSC group compared tothe control group, and BDNF mRNA expression in theBDNF-Ad+UCB-MSC group was higher than inboth other groups 5days after surgeryin vivo. Labeled neurons in the dorsal root ganglia (DRG), axon counts, axon density, and sciatic function index were significantly increased in the UCB-MSC and BDNF-Ad+ UCB-MSCgroupscompared to the controlgroup four weeksaftercell transplantation. Importantly,the BDNF-Ad+UCB-MSCgroup exhibited more peripheral nerve regeneration than the other two groups.Our results indicate thatboth UCB-MSCs and BDNF-Ad+UCB-MSCscan improve rat sciatic nerve regeneration, with BDNF-Ad+UCB-MSCsshowing a greater effectthan UCB-MSCs.

Mouse strain-dependent osteoclastogenesis in response to lipopolysaccharide.

Bacterial lipopolysaccharide (LPS) is a potent stimulator of bone resorption in periodontitis. Co-culture systems of mouse calvaria-derived osteoblasts and bone marrow-derived preosteoclasts were used as an in vitro osteoclast differentiation. This study revealed that co-cultures using ddY or ICR mouse strain responded differently to LPS while responded equally to 1alpha,25(OH)2D3. Thus, the different response to LPS indicates dissimilarity of two mouse stains in their capacity for generating osteoclasts while the two mouse strains share the similarity in response to 1alpha,25(OH)2D3. To identify which cells between osteoblasts and preosteoclasts in the co-culture are responsible for the dissimilarity, the reciprocal co-cultures were performed between ddY and ICR mouse strains. The treatment of 1,25(OH)2D3 to ddY/ICR (osteoblasts from ddY/preosteoclasts from ICR) and ICR/ddY reciprocal co-cultures also showed the similarity. In case of LPS treatment, the results of ddY/ICR were similar to ddY/ddY and the results of the other reciprocal co-culture, ICR/ddY combination, were consistent with those of ICR/ICR. It suggests that the dissimilarity between the two mouse strains may resident in osteoblasts but not in preosteoclasts. Therefore, the osteoblast is responsible for mouse strain-dependent osteoclastogenesis in response to LPS. Although mouse models will continue to provide insights into molecular mechanisms of osteoclastogenesis, caution should be exercised when using different mouse strains, especially ddY and ICR strains as models for osteoclast differentiation.

Hybrid external fixation of distal tibial fractures: new strategy to place pins and wires without penetrating the anterior compartment.

INTRODUCTION: Impalement of the anterior compartment musculature remains a problem in the hybrid external fixation of distal tibial fractures. The purposes of this study were to develop a tensioned wire configuration which does not violate the anterior compartment and to analyze the biomechanical implications of new wire configuration. MATERIALS AND METHODS: Thirty-seven adult volunteers without known pathology around either tibia were recruited. Axial computed tomography of the distal tibia was performed at 5-mm slices from the plafond to the upper margin of the syndesmosis. The wire convergence angle was measured at the 1-, 2-, and 2.5-cm levels using the following landmarks: tibialis anterior tendon (TA), tibialis posterior tendon (TP), peroneus brevis tendon (PB), anterolateral border of the lateral malleolus (LM). Two straight lines were drawn by connecting TA and PB and connecting TP and LM. The wire convergence angle was defined as an acute angle between these two lines. Then the orientation of the bisector axis of the wires was measured. As a second part of this study, a validated three-dimensional hybrid external fixator model was developed using finite elements modeling to analyze the stiffness of the frames constructed according to the measured wire convergence angle and orientation. Five simulated configurations were tested. The stiffness of each frame was analyzed under four load conditions: torsion, axial compression, side bending, and anteroposterior bending. RESULTS: The mean convergence angle was 30 degrees irrespective of the level. The bisector axis was oriented towards the anterolateral direction about 20 degrees from the coronal plane. The stiffness of the frame constructed with a wire convergence angle of 30 degrees and an anterolateral wire orientation of 20 degrees was 20-30% less than that of the frame constructed with 60 degrees wires oriented in a coronal plane. The addition of an anteromedial half-pin increased the stiffness significantly. CONCLUSIONS: Two tensioned wires may be placed without violating the anterior compartment by using the above four clinically identifiable landmarks. Addition of a half-pin on the anteromedial surface of the distal articular fragment makes the frame markedly stiffer than is possible using the standard wire configuration.