Lowering the Temperature of Solid Oxide Electrochemical Cells Using Triple-Doped Bismuth Oxides.

Despite the great potential of solid oxide electrochemical cells (SOCs) as highly efficient energy conversion devices, the undesirable high operating temperature limits their wider applicability. Herein, a novel approach to developing high-performance low-temperature SOCs (LT-SOCs) is presented through the use of an Er, Y, and Zr triple-doped bismuth oxide (EYZB). This study demonstrates that EYZB exhibits > 147 times higher ionic conductivity of 0.44 S cm-1 at 600 °C compared to commercial Y-stabilized zirconia electrolyte with excellent stability over 1000 h. By rationally incorporating EYZB in composite electrodes and bilayer electrolytes, the zirconia-based electrolyte LT-SOC achieves the unprecedentedly high performance of 3.45 and 2.02 W cm-2 in the fuel cell mode and 2.08 and 0.95 A cm-2 in the electrolysis cell mode at 700 °C and 600 °C, respectively. Further, a distinctive microstructural feature of EYZB that largely extends triple phase boundary at the interface is revealed through digital twinning. This work provides insights for developing high-performance LT-SOCs.

Enhancing Bifunctional Electrocatalytic Activities of Oxygen Electrodes via Incorporating Highly Conductive Sm3+ and Nd3+ Double-Doped Ceria for Reversible Solid Oxide Cells.

Solid oxide cells (SOCs) are mutually convertible energy devices capable of generating electricity from chemical fuels including hydrogen in the fuel cell mode and producing green hydrogen using electricity from renewable but intermittent solar and wind resources in the electrolysis cell mode. An effective approach to enhance the performance of SOCs at reduced temperatures is by developing highly active oxygen electrodes for both oxygen reduction and oxygen evolution reactions. Herein, highly conductive Sm3+ and Nd3+ double-doped ceria (Sm0.075Nd0.075Ce0.85O2-δ, SNDC) is utilized as an active component for reversible SOC applications. We develop a novel La0.6Sr0.4Co0.2Fe0.8O3 -δ (LSCF)-SNDC composite oxygen electrode. Compared with the conventional LSCF-Gd-doped ceria oxygen electrode, the LSCF-SNDC exhibits ∼35% lower cathode polarization resistance (0.042 Ω cm2 at 750 °C) owing to rapid oxygen incorporation and surface diffusion kinetics. Furthermore, the SOC with the LSCF-SNDC oxygen electrode and the SNDC buffer layer yields a remarkable performance in both the fuel cell (1.54 W cm-2 at 750 °C) and electrolysis cell (1.37 A cm-2 at 750 °C) modes because the incorporation of SNDC promotes the surface diffusion kinetics at the oxygen electrode bulk and the activity of the triple phase boundary at the interface. These findings suggest that the highly conductive SNDC material effectively enhances both oxygen reduction and oxygen evolution reactions, thus serving as a promising material in reversible SOC applications at reduced temperatures.

Correlation of Time-Dependent Oxygen Surface Exchange Kinetics with Surface Chemistry of La0.6Sr0.4Co0.2Fe0.8O3-δ Catalysts.

The Sr segregation at the surface of a perovskite La0.6Sr0.4Co0.2Fe0.8O3-δ (LSCF) oxygen electrode is detrimental to the electrochemical performance and durability of energy conversion devices such as solid oxide fuel cells. However, a quantitative correlation of degradation of the oxygen surface exchange kinetics with Sr precipitation formation at the LSCF surface is not clearly understood yet. Herein, the correlation of the time-dependent degradation mechanisms of the LSCF catalysts with respect to Sr segregation phenomenon at the surface were investigated at 800 °C for a prolonged annealing time (∼800 h) by combining in situ electrochemical measurements, and ex situ chemical and structural analyses at the multiscale. The in situ monitored surface exchange coefficient (kchem) was found to drastically drop by ∼86% over the 800 h, and it was accompanied by the formation of Sr-containing secondary phases on the bulk LSCF surface, as expected. However, the estimated coverage of Sr segregation on the LSCF surface was only ∼15%, even after 800 h of aging time, showing significant deviation from the kchem degradation rate (∼86%). The surface chemistry evolution at the clean surface area, which is believed to be electrochemically active, was further analyzed on the nanoscale. The quantified results showed that the Sr elemental fraction of the A-site at the outermost surface of the LSCF samples was becoming deficient from ∼4.0 at 0 h to ∼0.27 at 800 h annealing. Interestingly, the time-dependent behavioral tendencies between kchem degradation and surface Sr fractional changes were highly analogous. Thus, our results suggest that this Sr deficiency at the clean surface region more dominantly impacts the degradation process rather than an electrochemical activity passivation by the SrOx precipitates, which has been shown to be a major degradation mechanism of LSCF performance.

Functionally Graded Bismuth Oxide/Zirconia Bilayer Electrolytes for High-Performance Intermediate-Temperature Solid Oxide Fuel Cells (IT-SOFCs).

A functionally graded Bi1.6Er0.4O3 (ESB)/Y0.16Zr0.84O1.92 (YSZ) bilayer electrolyte is successfully developed via a cost-effective screen printing process using nanoscale ESB powders on the tape-cast NiO-YSZ anode support. Because of the highly enhanced oxygen incorporation process at the cathode/electrolyte interface, a novel bilayer solid oxide fuel cell (SOFC) yields extremely high power density of ∼2.1 W cm-2 at 700 °C, which is a 2.4 times increase compared to that of the YSZ single electrolyte SOFC.