Ultrafast Nucleation Reverses Dissolution of Transition Metal Ions for Robust Aqueous Batteries.

The dissolution of transition metal ions causes the notorious peeling of active substances and attenuates electrochemical capacity. Frustrated by the ceaseless task of pushing a boulder up a mountain, Sisyphus of the Greek myth yearned for a treasure to be unearthed that could bolster his efforts. Inspirationally, by using ferricyanide ions (Fe(CN)63-) in an electrolyte as a driving force and taking advantage of the fast nucleation rate of copper hexacyanoferrate (CuHCF), we successfully reversed the dissolution of Fe and Cu ions that typically occurs during cycling. The capacity retention increased from 5.7% to 99.4% at 0.5 A g-1 after 10,000 cycles, and extreme stability of 99.8% at 1 A g-1 after 40,000 cycles was achieved. Fe(CN)63- enables atom-by-atom substitution during the electrochemical process, enhancing conductivity and reducing volume change. Moreover, we demonstrate that this approach is applicable to various aqueous batteries (i.e., NH4+, Li+, Na+, K+, Mg2+, Ca2+, and Al3+).

Radial-tangential mode of single-wall carbon nanotubes manifested by Landau regulation: reinterpretation of low- and intermediate-frequency Raman signals.

The low-frequency Raman signals of single-wall carbon nanotubes (SWNTs), appearing in the range of 100-300 cm-1, have been interpreted as radial-breathing mode (RBM) comprising pure radial Eigenvectors. Here, we report that most of the low-frequency and intermediate-frequency signals of SWNTs are radial-tangential modes (RTMs) coexisting radial and tangential Eigenvectors, while only the first peak at the low-frequency side is the RBM. Density functional theory simulation for SWNTs of ~ 2 nm in diameter shows that dozens of RTMs exhibit following the RBM (~ 150 cm-1) up to G-mode (~ 1592 cm-1) in order with Landau regulation. We specify the RBM and the RTM on Raman spectra obtained from SWNTs, where both appear as prominent peaks between 149 and 170 cm-1 and ripple-like peaks between 166 and 1440 cm-1, respectively. We report that the RTMs have been regarded as RBM (~ 300 cm-1) and ambiguously named as intermediate-frequency mode (300-1300 cm-1) without assignment. The RTMs gradually interlink the RBM and the G-mode resulting in the symmetric Raman spectra in intensity. We reveal high-resolution transmission microscope evidence for a helical structure of SWNTs, informing the typical diameter of commercial SWNTs to be 1.4-2 nm.

Composition-Tuned (MoWV)Se2 Ternary Alloy Nanosheets as Excellent Hydrogen Evolution Reaction Electrocatalysts.

Ternary alloying of transition metal dichalcogenides (TMDs) has the potential for altering the electronic structure of materials to suit electrochemical applications. Herein, we synthesized (MoWV)Se2 nanosheets at various compositions via a colloidal reaction. The mole fraction of V atoms (xV) was successfully increased up to 0.8, producing a metallic phase that is highly durable against hydration. Furthermore, we synthesized (MoW)Se2 nanosheets over the entire composition range. The atomic mixing of the ternary alloys is more random than that of the constitutional binary alloys, as supported by first-principles calculations. Compared to binary alloying, ternary alloying more effectively enhanced the electrocatalytic activity for acidic hydrogen evolution reaction (HER). The HER performance increased upon increasing xV to 0.44, and thereafter, it declined at higher xV primarily owing to surface oxidation. The analysis of Gibbs free energy for H adsorption revealed that ternary alloying strongly activates the basal plane for the HER. VSe2 contains numerous sites favorable for H adsorption, facilitating the composition-dependent HER. These results provide a pioneering strategy for designing multicomponent TMD catalysts that maximize the advantages of each component.

Full Composition Tuning of W1-xNbxSe2 Alloy Nanosheets to Promote the Electrocatalytic Hydrogen Evolution Reaction.

Composition modulation of transition metal dichalcogenides is an effective way to engineer their crystal/electronic structures for expanded applications. Here, fully composition-tuned W1-xNbxSe2 alloy nanosheets were produced via colloidal synthesis. These nanosheets ultimately exhibited a notable transition between WSe2 and NbSe2 hexagonal phases at x = 0.6. As x approaches 0.6, point doping is converted into cluster doping and eventually separated domains of WSe2 and NbSe2. Extensive density functional theory calculations predicted the composition-dependent crystal structures and phase transitions, consistently with the experiments. The electrocatalytic activity for the hydrogen evolution reaction (HER) in acidic electrolyte was significantly enhanced at x = 0.2, which was linked with the d-band center. The Gibbs free energy for the H adsorption at various basal and edge sites supported the enhanced HER performance of the metallic alloy nanosheets. We suggested that the dispersed doping structures of Nb atoms resulted in the best HER performance. Our findings highlight the significance of composition tuning in enhancing the catalytic activity of alloys.

MoSe2 -VSe2 -NbSe2 Ternary Alloy Nanosheets to Boost Electrocatalytic Hydrogen Evolution Reaction.

Alloying of transition metal dichalcogenides (TMDs) is a pioneering method for engineering electronic structures with expanded applications. In this study, MoSe2 -VSe2 -NbSe2 ternary alloy nanosheets are synthesized via a colloidal reaction. The composition is successfully tuned over a wide range to adjust the 2H-1T phase transition. The alloy nanosheets consist of miscible atomic structures at all compositions, which is distinct from immiscible binary alloys. Compared to each binary alloy, the ternary alloys display higher electrocatalytic activity toward the hydrogen evolution reaction (HER) in an acidic electrolyte. The HER performance exhibits a volcano-type composition dependence, which is correlated with the experimental d-band center (εd ). Spin-polarized density functional theory (DFT) calculations consistently predict the homogenous atomic distributions. The Gibbs free energy of H adsorption (ΔGH* ) and the activation barrier (Ea ) support that miscible ternary alloying greatly enhances the HER performance.

WSe2-VSe2 Alloyed Nanosheets to Enhance the Catalytic Performance of Hydrogen Evolution Reaction.

Tuning the electronic structures of transition metal dichalcogenides (TMD) is essential for their implementation in next-generation energy technologies. In this study, we synthesized composition-tuned WSe2-VSe2 (W1-xVxSe2, x = 0-1) alloyed nanosheets using a colloidal reaction. Alloying the semiconducting WSe2 with VSe2 converts the material into a metallic one, followed by a 2H-to-1T phase transition at x = 0.7. Over a wide composition range, WSe2 and VSe2 are atomically immiscible and form separate ordered domains. The miscible alloy at x = 0.1 displayed enhanced electrocatalytic activity toward the hydrogen evolution reaction (HER) in an acidic electrolyte. This trend was correlated with the d-band center via a volcano-type relationship. Spin-polarized density functional theory calculations consistently predicted the atomic immiscibility, which became more significant at the 2H-1T phase transition composition. The Gibbs free energy of H adsorption on the basal planes (Se or hole sites) and the activation barriers along the Volmer-Heyrovsky reaction pathway supported the enhanced HER performance of the alloy phase, suggesting that the dispersed V-doped structures were responsible for the best HER catalytic activity. Our study demonstrates how the atomic structure of TMD alloy nanosheets plays a crucial role in enhancing catalytic activity.

Interaction of Antifungal Drugs with CYP3A- and OATP1B-Mediated Venetoclax Elimination.

Venetoclax, a BCL-2 inhibitor used to treat certain hematological cancers, exhibits low oral bioavailability and high interpatient pharmacokinetic variability. Venetoclax is commonly administered with prophylactic antifungal drugs that may result in drug interactions, of which the underlying mechanisms remain poorly understood. We hypothesized that antifungal drugs may increase venetoclax exposure through inhibition of both CYP3A-mediated metabolism and OATP1B-mediated transport. Pharmacokinetic studies were performed in wild-type mice and mice genetically engineered to lack all CYP3A isoforms, or OATP1B2 that received venetoclax alone or in combination with ketoconazole or micafungin. In mice lacking all CYP3A isoforms, venetoclax AUC was increased by 1.8-fold, and pretreatment with the antifungal ketoconazole further increased venetoclax exposure by 1.6-fold, despite the absence of CYP3A. Ensuing experiments demonstrated that the deficiency of OATP1B-type transporters is also associated with increases in venetoclax exposure, and that many antifungal drugs, including micafungin, posaconazole, and isavuconazole, are inhibitors of this transport mechanism both in vitro and in vivo. These studies have identified OATP1B-mediated transport as a previously unrecognized contributor to the elimination of venetoclax that is sensitive to inhibition by various clinically-relevant antifungal drugs. Additional consideration is warranted when venetoclax is administered together with agents that inhibit both CYP3A-mediated metabolism and OATP1B-mediated transport.

Polytypic Phase Transition of Nb1-xVxSe2 via Colloidal Synthesis and Their Catalytic Activity toward Hydrogen Evolution Reaction.

Polytypes of two-dimensional transition metal dichalcogenide can extend the architecture and application of nanostructures. Herein, Nb1-xVxSe2 alloy nanosheets in the full composition range (x) were synthesized by a colloidal reaction. At x = 0.1-0.3, a phase transition occurred from various hexagonal (three 2H and one 4H types) phase NbSe2 to an atomically homogeneous 1T phase VSe2. Density functional theory calculations also revealed a polytypic phase transition at x = 0.3, which was shifted close to 0 in the presence of Se vacancies. Furthermore, the calculations validate favorable formation of Se vacancies at the phase transition. The sample at x = 0.3 exhibited enhanced electrocatalytic activity toward the hydrogen evolution reaction (HER) in 0.5 M H2SO4. The Gibbs free energy indicates that the catalytic HER performance is correlated with the active Se vacancy sites of polytypic structures.

AA h BN crystal, basic structure of boron nitride nanotubes.

AA h boron nitride (BN) crystal, assigned to an orthorhombic space group (No. 31, Pm21), is reported here. This new AA h BN crystal exhibits a 'linear' morphology for high-resolution transmission electron microscopy (HRTEM) and a (non-hexagonal) 'diagonal' electron-diffraction pattern, which have been experimentally demonstrated in this article. It is also demonstrated that this new crystal is the basic structure of multi-walled BN nanotubes (BNNTs) existing in the form of a helix. The helical AA h BNNTs exist in a metastable phase owing to 〈200〉 texture growth of the orthorhombic crystal, where the energy is ∼15 meV higher than that of stable AB or AA' BN. It is shown that the typical scanning electron microscope 'fluffy cotton-like' morphology of BNNTs is due to secondary growth of diverse BN sheets (including mono-layers) on incoherently scrolled wall strands of BNNTs, providing further evidence for the helical structure with HRTEM evidence for a left-handed helix.

Phase-Transition Mo1-xVxSe2 Alloy Nanosheets with Rich V-Se Vacancies and Their Enhanced Catalytic Performance of Hydrogen Evolution Reaction.

Alloys of transition-metal dichalcogenide can display distinctive phase evolution because of their two-dimensional structures. Herein, we report the colloidal synthesis of Mo1-xVxSe2 alloy nanosheets with full composition tuning. Alloying led to a phase transition at x = 0.7 from the semiconducting 2H phase MoSe2 to the metallic 1T phase VSe2. It also produced significant V and Se vacancies, which became the richest in the 2H phase at x = 0.3-0.5. Extensive spin-polarized density functional theory calculations consistently predicted the 2H-1T phase transition at x = 0.7, in agreement with the experimental results. The vacancy formation energy also supports the formation of V and Se vacancies. Alloying in the 2H phase enhanced the electrocatalytic performance toward hydrogen evolution reaction (HER) at x = 0.3 (in 0.5 M H2SO4) or 0.4 (in 1 M KOH). The Gibbs free energy along the HER pathway indicates that this maximum performance is due to the highest concentration of active V and Se vacancy sites.

AB-stacked nanosheet-based hexagonal boron nitride.

Hexagonal boron nitride (h-BN) has been generally interpreted as having an AA stacking sequence. Evidence is presented in this article indicating that typical commercial h-BN platelets (∼10-500 nm in thickness) exhibit stacks of parallel nanosheets (∼10 nm in thickness) predominantly in the AB sequence. The AB-stacked nanosheet occurs as a metastable phase of h-BN resulting from the preferred texture and lateral growth of armchair (110) planes. It appears as an independent nanosheet or unit for h-BN platelets. The analysis is supported by simulation of thin AB films (2-20 layers), which explains the unique X-ray diffraction pattern of h-BN. With this analysis and the role of pressure in commercial high-pressure high-temperature sintering (driving nucleation and parallelizing the in-plane crystalline growth of the nuclei), a growth mechanism is proposed for 2D h-BN (on a substrate) as `substrate-induced 2D growth', where the substrate plays the role of pressure.

Iron-Palladium magnetic nanoparticles for decolorizing rhodamine B and scavenging reactive oxygen species.

HYPOTHESIS: Here, FePd magnetic nanoparticles (MNPs) are developed as artificial enzymes with high biocompatibility and reusability. EXPERIMENT: The nanoparticles (NPs) are synthesized in an aqueous solvent by one-pot synthesis utilizing glutathione (GSH) and cysteine (Cys) as surfactants. FINDINGS: The prepared hydrophilic FePd NPs are redispersible in water. Further, they exhibit catalytic activity for the degradation of rhodamine B (RhB), as well as for the inhibition of reactive oxygen species (ROS) production induced by H2O2, which are two- and seven-fold enhancements of their catalytic performances, respectively, compared with that of horseradish peroxidase. The computational simulation and electrochemical analysis indicate that the enhancement of the catalytic effect is due to the protection of the MNP surface by GSH and Cys. In vitro experiments reveal that FePd MNPs behave like a peroxidase and decrease the ROS in mammalian cells. The cytotoxicity assessment of FePd MNPs via exposures to different cell lines for over seven days indicates that they can maintain the cell viability of >90% for up to 20 µgmL-1 concentration. FePd MNPs with high saturation magnetization and biocompatibility can be utilized as recyclable peroxidase-mimicking nanozymes and biosensors in a variety of catalytic and biological applications.

Vascular Calcification in Patients Undergoing Total Knee Arthroplasty: Frequency and Effects on the Surgery.

BACKGROUD: This study aims to investigate the frequency of distal femoral and popliteal arterial calcification and to evaluate the intraoperative and postoperative effects of arterial calcification in patients undergoing total knee arthroplasty using a tourniquet. METHODS: The records of 5,438 patients who had undergone primary total knee arthroplasty between January 2003 and January 2017 were retrospectively reviewed. We examined the preoperative radiographs of the knee from all patients for calcifications of the femoral and popliteal arteries. Vascular calcification was identified on preoperative radiographs in 223 cases. Intraoperative and postoperative complications were investigated among these patients. Postoperative complications were analyzed from the time of surgery to the last follow-up (minimum 1-year follow-up). RESULTS: Vascular calcification of the arteries around the knee was found in 223 cases (4.1%). The mean patient age was 70.6 years in the non-calcification group and 73.8 years in the calcification group (p > 0.05). The calcification group was classified into medial, intimal, or mixed subgroups according to the morphology of calcification on preoperative radiographs. The medial type included 46 cases (20.6%); intimal type, 161 cases (72.2%); and mixed type, 16 cases (2.7%). There was no statistically significant difference in demographic and surgical data among the three groups. There were intraoperative complications in two cases in the medial type group, both of which involved tourniquet failure. There was also a postoperative complication in one case in the medial type group, which involved wound dehiscence at 2 weeks postoperatively. No other postoperative complications were identified during 1-year follow-up. CONCLUSIONS: Despite the presence of calcifications in the arteries around the knee, total knee arthroplasty (using a tourniquet) can be performed without serious complications.

Ruthenium Nanoparticles on Cobalt-Doped 1T' Phase MoS2 Nanosheets for Overall Water Splitting.

2D MoS2 nanostructures have recently attracted considerable attention because of their outstanding electrocatalytic properties. The synthesis of unique Co-Ru-MoS2 hybrid nanosheets with excellent catalytic activity toward overall water splitting in alkaline solution is reported. 1T' phase MoS2 nanosheets are doped homogeneously with Co atoms and decorated with Ru nanoparticles. The catalytic performance of hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is characterized by low overpotentials of 52 and 308 mV at 10 mA cm-2 and Tafel slopes of 55 and 50 mV decade-1 in 1.0 m KOH, respectively. Analysis of X-ray photoelectron and absorption spectra of the catalysts show that the MoS2 well retained its metallic 1T' phase, which guarantees good electrical conductivity during the reaction. The Gibbs free energy calculation for the reaction pathway in alkaline electrolyte confirms that the Ru nanoparticles on the Co-doped MoS2 greatly enhance the HER activity. Water adsorption and dissociation take place favorably on the Ru, and the doped Co further catalyzes HER by making the reaction intermediates more favorable. The high OER performance is attributed to the catalytically active RuO2 nanoparticles that are produced via oxidation of Ru nanoparticles.

Partial oxidation of methane to methanol by isolated Pt catalyst supported on a CeO2 nanoparticle.

Catalytic transformation of methane (CH4) into methanol in a single step is a challenging issue for the utilization of CH4. We present a direct method for converting CH4 into methanol with high selectivity over a Pt/CeO2 catalyst which contains ionic Pt2+ species supported on a CeO2 nanoparticle. The Pt/CeO2 catalyst reproducibly yielded 6.27 mmol/g of Pt with a selectivity of over 95% at 300 °C when CH4 and CO are used as reactants, while the catalyst had a lower activity when using only CH4 without CO. Active lattice oxygen created on the Pt and CeO2 interface provides selective reaction pathways for the conversion of CH4 to methanol. Based on high-angle annular dark-field scanning transmission electron microscopy, x-ray photoelectron spectroscopy, x-ray absorption near-edge structure, extended x-ray absorption fine structure, catalytic studies, and density functional theory calculations, we propose a mechanistic pathway involving CH4 activation at the active site in the vicinity of Pt2+ species.

Thermally Activated Upconversion Near-Infrared Photoluminescence from Carbon Dots Synthesized via Microwave Assisted Exfoliation.

Upconversion near-infrared (NIR) fluorescent carbon dots (CDs) are important for imaging applications. Herein, thermally activated upconversion photoluminescence (UCPL) in the NIR region, with an emission peak at 784 nm, which appears under 808 nm continuous-wave laser excitation, are realized in the NIR absorbing/emissive CDs (NIR-CDs). The NIR-CDs are synthesized by microwave-assisted exfoliation of red emissive CDs in dimethylformamide, and feature single or few-layered graphene-like cores. This structure provides an enhanced contact area of the graphene-like plates in the core with the electron-acceptor carbonyl groups in dimethylformamide, which contributes to the main NIR absorption band peaked at 724 nm and a tail band in 800-850 nm. Temperature-dependent photoluminescence spectra and transient absorption spectra confirm that the UCPL of NIR-CDs is due to the thermally activated electron transitions in the excited state, rather than the multiphoton absorption process. Temperature dependent upconversion NIR luminescence imaging is demonstrated for NIR-CDs embedded in a polyvinyl pyrrolidone film, and the NIR upconversion luminescence imaging in vivo using NIR-CDs in a mouse model is accomplished.

Chemically Synthesized Carbon Nanorods with Dual Polarized Emission.

We realized the synthesis of carbon nanorods-monodisperse colloidal particles with a length of 50 nm and a width of 20 nm-which can be considered an addition to the family of light-emitting carbon-based nanostructures. Their anisotropic shape is determined by the use of the surfactant aminopropylisobutyl polyhedral oligomeric silsesquioxane, and their optical properties originate from domains of polycyclic aromatic hydrocarbons incorporated within an inorganic framework. The nanorods show dual polarized emission with a quantum yield of 15-20% and emission anisotropy of ∼0.3, which changes from blue (460 nm) to yellow (565 nm) depending on the excitation wavelength. These carbon nanorods expand the range of light-emitting carbon nanomaterials available for optoelectronic and biolabeling applications.

Integrating Catalysis of Methane Decomposition and Electrocatalytic Hydrogen Evolution with Ni/CeO2 for Improved Hydrogen Production Efficiency.

Ni/CeO2 enables either methane decomposition or water electrolysis for pure hydrogen production. Ni/CeO2 , prepared by a sol-gel method with only one heat treatment step, was used to catalyze methane decomposition for the generation of H2 . The solid byproduct, Ni/CeO2 /carbon nanotube (CNT), was further employed as an electrocatalyst in the hydrogen evolution reaction (HER) for H2 production. The Ni/CeO2 catalyst exhibits excellent activity for methane decomposition because CeO2 prevents carbon encapsulation of Ni nanoparticles during the preparation process and forms a special metal-support interface with Ni. The derived CNTs act as antenna to improve conductivity and promote the dispersion of agglomerated Ni/CeO2 . In addition, they provide H2 diffusion paths and prevent Ni/CeO2 from peeling off the HER electrode. Although long-term methane decomposition reduces the HER activity of Ni/CeO2 /CNTs (owing to degradation of the delicate Ni/CeO2 interface), the tunable nature of the synthesis makes this an attractive sustainable approach to synthesize future high-performance materials.

Interfacial CoOx Layers on TiO2 as an Efficient Catalyst for Solvent-Free Aerobic Oxidation of Hydrocarbons.

Construction of efficient interfaces to improve the performance of supported metal catalysts is a challenging but effective technique. A newly synthesized catalyst with layered cobalt oxide on the surface of titania (layer-CoOx /TiO2 ) is highly selective towards the aerobic oxidation of C-H bonds in a series of hydrocarbons under sustainable conditions. The layer-CoOx /TiO2 easily outperforms the state-of-the-art noble metal catalysts and homogeneous cobalt salts used in industry. In-depth structural and functional characterization reveal that the layer-CoOx /TiO2 readily reacts with O2 for the adsorption and activation of C-H bonds. The layered structure of CoOx can maximize the interfacial effect of CoOx /TiO2 leading to a good performance for the oxidation of C-H bonds.

Analysis of nano-crystals: Evaluation of heavy metal-embedded biological specimen by high voltage electron microscopy.

Heavy metal compounds are adsorbed onto biological specimen in order to enhance the contrast as well as to preserve the structural features of the specimen against electron beam-induced radiation damage. In particular, in combination with computational image processing, negative staining is widely used for structural analysis of protein complexes to moderate resolutions. Image analysis of negatively stained biological specimen is known to suffer from limited achievable resolution due to dehydration and large grain size of staining molecules although the extent of such effect remains somewhat dubious. Stain molecules exist as grains under electron beam. However, clear observation of the crystalline nature of the grains and their association with biological specimen has not been thoroughly demonstrated. In this study, we attempted high-resolution TEM (HRTEM) using high voltage electron microscopy and electron crystallography analysis for the detailed characterization of negatively stained biological specimen, focusing on physical state and chemical composition of the stain molecules. The electron crystallography analysis allowed for the identification of the crystal constituents of widely used stains, hence revealing the chemical nature and the morphology of the stain molecules at specimen level. This study re-evaluated generally accepted notions on negative staining, and may help correctly interpreting the structural analysis of stained biological specimen.