Analysis of a silicon comb structure using an inverse Talbot-Lau neutron grating interferometer.

We describe an inverse Talbot-Lau neutron grating interferometer that provides an extended autocorrelation length range for quantitative dark-field imaging. To our knowledge, this is the first report of a Talbot-Lau neutron grating interferometer (nTLI) with inverse geometry. We demonstrate a range of autocorrelation lengths (ACL) starting at low tens of nanometers, which is significantly extended compared to the ranges of conventional and symmetric setups. ACLs from a minimum of 44 nm to the maximum of 3.5 µm were presented for the designed wavelength of 4.4 Å in experiments. Additionally, the inverse nTLI has neutron-absorbing gratings with an optically thick gadolinium oxysulfide (Gadox) structure, allowing it to provide a visibility of up to 52% while maintaining a large field of view of approximately 100 mm × 100 mm. We demonstrate the application of our interferometer to quantitative dark-field imaging by using diluted polystyrene particles in an aqueous solution and silicon comb structures. We obtain quantitative structural information of the sphere size and concentration of diluted polystyrene particles and the period, height, and duty cycle of the silicon comb structures. The optically thick Gadox structure of the analyzer grating also provides improved characteristics for the correction of incoherent neutron scattering in an aqueous solution compared to the symmetric nTLI.

Neutron grating interferometer with an analyzer grating based on a light blocker.

We study an analyzer grating based on a scintillation light blocker for a Talbot-Lau grating interferometer. This is an alternative way to analyze the Talbot self-image without the need for an often difficult to fabricate absorption grating for the incident radiation. The feasibility of this approach using a neutron beam has been evaluated and experiments have been conducted at the cold neutron imaging facility of the NIST center for Neutron Research. The neutron grating interferometer with the proposed analyzer grating successfully produced attenuation, differential phase, and dark-field contrast images. In addition, numerical simulations were performed to simulate the Talbot pattern and visibility using scintillation screens of different thicknesses and there is good agreement with the experimental measurements. The results show potential for reducing the difficulty of fabricating analyzer grating, and a possibility for the so-called shadow effect to be eliminated and large-area gratings to be produced, especially when applied to X-rays. We report the performance of the analyzer grating based on a light blocker and evaluate its feasibility for the grating interferometer.

Reconstruction of Compton Edges in Plastic Gamma Spectra Using Deep Autoencoder.

Plastic scintillation detectors are widely utilized in radiation measurement because of their unique characteristics. However, they are generally used for counting applications because of the energy broadening effect and the absence of a photo peak in their spectra. To overcome their weaknesses, many studies on pseudo spectroscopy have been reported, but most of them have not been able to directly identify the energy of incident gamma rays. In this paper, we propose a method to reconstruct Compton edges in plastic gamma spectra using an artificial neural network for direct pseudo gamma spectroscopy. Spectra simulated using MCNP 6.2 software were used to generate training and validation sets. Our model was trained to reconstruct Compton edges in plastic gamma spectra. In addition, we aimed for our model to be capable of reconstructing Compton edges even for spectra having poor counting statistics by designing a dataset generation procedure. Minimum reconstructible counts for single isotopes were evaluated with metric of mean averaged percentage error as 650 for 60Co, 2000 for 137Cs, 3050 for 22Na, and 3750 for 133Ba. The performance of our model was verified using the simulated spectra measured by a PVT detector. Although our model was trained using simulation data only, it successfully reconstructed Compton edges even in measured gamma spectra with poor counting statistics.

Symmetric Talbot-Lau neutron grating interferometry and incoherent scattering correction for quantitative dark-field imaging.

We introduce the application of a symmetric Talbot-Lau neutron grating interferometer which provides a significantly extended autocorrelation length range essential for quantitative dark-field contrast imaging. The highly efficient set-up overcomes the limitation of the conventional Talbot-Lau technique to a severely limited micrometer range as well as the limitation of the other advanced dark-field imaging techniques in the nanometer regime. The novel set-up enables efficient and continuous dark-field contrast imaging providing quantitative small-angle neutron scattering information for structures in a regime from some tens of nanometers to several tens of micrometers. The quantitative analysis enabled in and by such an extended range is demonstrated through application to reference sample systems of the diluted polystyrene particle in aqueous solutions. Here we additionally demonstrate and successfully discuss the correction for incoherent scattering. This correction results to be necessary to achieve meaningful quantitative structural results. Furthermore, we present the measurements, data modelling and analysis of the two distinct kinds of cohesive powders enabled by the novel approach, revealing the significant structural differences of their fractal nature.

Characterization of the phase sensitivity, visibility, and resolution in a symmetric neutron grating interferometer.

A symmetric Talbot-Lau neutron grating interferometer has been developed for achieving high phase sensitivity. The gratings for the interferometer have been designed by maximizing the intergrating distances available at the experimental facility and optimizing the period of the gratings. The phase sensitivity in a Talbot-Lau grating interferometer has been mathematically modeled and analyzed and compared with experimental data. Evaluation experiments have been performed at the cold neutron imaging facility of the NIST Center for Neutron Research. The symmetric Talbot-Lau neutron grating interferometer exhibits distinct advantages in terms of high sensitivity and wide range for dark-field contrast imaging. Also, the fabrication of gratings is made easier, simpler, and more economical by the Gadox powder filling method, which gives them excellent phase contrast compared with other geometric Talbot-Lau neutron grating interferometers.

Multi-scale analyses of constituent phases in a trip-assisted duplex stainless steel by electron backscatter diffraction, in situ neutron diffraction, and energy selective neutron imaging.

Micrometer to centimeter scale analyses of the crystalline phase volume fractions in a trip-assisted duplex stainless steel were performed under loading using electron backscatter diffraction (EBSD), in situ neutron diffraction, and energy selective neutron imaging (ESNI) methods. In contrast to the localized investigations of EBSD, ESNI provides macroscopic spatial distributions in a volume-averaged manner over the entire specimen with a spatial resolution of about 65 µm. The ESNI shows that the martensite is concentrated on the necking region and estimates its volume fraction of 14% at a strain of 0.2, which is comparable to the neutron diffraction result.

Feasibility evaluation of a neutron grating interferometer with an analyzer grating based on a structured scintillator.

We introduce an analyzer grating based on a structured scintillator fabricated by a gadolinium oxysulfide powder filling method for a symmetric Talbot-Lau neutron grating interferometer. This is an alternative way to analyze the Talbot self-image of a grating interferometer without using an absorption grating to block neutrons. Since the structured scintillator analyzer grating itself generates the signal for neutron detection, we do not need an additional scintillator screen as an absorption analyzer grating. We have developed and tested an analyzer grating based on a structured scintillator in our symmetric Talbot-Lau neutron grating interferometer to produce high fidelity absorption, differential phase, and dark-field contrast images. The acquired images have been compared to results of a grating interferometer utilizing a typical absorption analyzer grating with two commercial scintillation screens. The analyzer grating based on the structured scintillator enhances interference fringe visibility and shows a great potential for economical fabrication, compact system design, and so on. We report the performance of the analyzer grating based on a structured scintillator and evaluate its feasibility for the neutron grating interferometer.

PLASTIC SCINTILLATOR FOR RADIATION DOSIMETRY.

Inorganic scintillators, composed of high-atomic-number materials such as the CsI(Tl) scintillator, are commonly used in commercially available a silicon diode and a scintillator embedded indirect-type electronic personal dosimeters because the light yield of the inorganic scintillator is higher than that of an organic scintillator. However, when it comes to tissue-equivalent dose measurements, a plastic scintillator such as polyvinyl toluene (PVT) is a more appropriate material than an inorganic scintillator because of the mass energy absorption coefficient. To verify the difference in the absorbed doses for each scintillator, absorbed doses from the energy spectrum and the calculated absorbed dose were compared. From the results, the absorbed dose of the plastic scintillator was almost the same as that of the tissue for the overall photon energy. However, in the case of CsI, it was similar to that of the tissue only for a photon energy from 500 to 4000 keV. Thus, the values and tendency of the mass energy absorption coefficient of the PVT are much more similar to those of human tissue than those of the CsI.

Fabrication and characterization of the source grating for visibility improvement of neutron phase imaging with gratings.

The fabrication of gratings including metal deposition processes for highly neutron absorbing lines is a critical issue to achieve a good visibility of the grating-based phase imaging system. The source grating for a neutron Talbot-Lau interferometer is an array of Gadolinium (Gd) structures that are generally made by sputtering, photo-lithography, and chemical wet etching. However, it is very challenging to fabricate a Gd structure with sufficient neutron attenuation of approximately more than 20 µm using a conventional metal deposition method because of the slow Gd deposition rate, film stress, high material cost, and so on. In this article, we fabricated the source gratings for neutron Talbot-Lau interferometers by filling the silicon structure with Gadox particles. The new fabrication method allowed us a very stable and efficient way to achieve a much higher Gadox filled structure than a Gd film structure, and is even more suitable for thermal polychromatic neutrons, which are more difficult to stop than cold neutrons. The newly fabricated source gratings were tested at the polychromatic thermal neutron grating interferometer system of HANARO at the Korea Atomic Energy Research Institute, and the visibilities and images from the neutron phase imaging system with the new source gratings were compared with those fabricated by a Gd deposition method.