Exploring the effect of BRCA1/2 status on chemotherapy-induced hematologic toxicity in patients with ovarian cancer.

OBJECTIVE: BRCA1/2 are integral to the DNA repair mechanism and their germline pathogenic variants (gBRCA) result in a high risk for developing breast and ovarian cancer. Patients with gBRCA mutations showed increased sensitivity to DNA cross-linking agent but might have increased treatment-related toxicities. Thus, we hypothesized that gBRCA mutation ovarian cancer patients who underwent platinum-based chemotherapy might be at higher risk of developing chemotherapy-induced hematologic toxicity. METHODS: This study enrolled 160 patients with ovarian cancer who received frontline platinum-based chemotherapy between 2011 and 2019 in Kyungpook National University Chilgok Hospital. Incidence rate and severity of chemotherapy-induced hematologic toxicity (neutropenia, anemia, thrombocytopenia) was compared for BRCA mutation and wild patients. RESULTS: 160 women, including 62 BRCA1/2 (38 BRCA1, and 25 BRCA2) mutation group, and 98 noncarriers, were analyzed. A higher frequency of G2 anemia was noted in the BRCA -mutant group (22% vs. 1%, p = 0.07). Furthermore, G3 anemia was significantly common among BRCA group (12.9% vs. 3%, p = 0.02). In the subgroup analysis according to BRCA1/2 status, BRCA1 mutated patients showed a significantly higher frequency of G1 anemia than BRCA2 (89% vs. 60%, p = 0.01). In terms of neutropenia and thrombocytopenia, BRCA mutated patients and noncarriers had similar hematologic toxicity. CONCLUSION: Germline BRCA mutations were associated with a higher frequency of G2/3 anemia in ovarian cancer patients who underwent first-line platinum-based chemotherapy. Moreover, the BRCA1 mutation appeared to be more strongly associated with the incidence of chemotherapy-induced anemia. Our findings warrant further investigation in larger, prospective studies to confirm these current findings and determine whether preventive interventions may be necessary.

Relationship between psycho-physiological indicators and task performance under various indoor space designs for telecommuting environment by introducing mixed-reality.

The increase in telecommuting during COVID-19 and advances in digital technology have necessitated the establishment of guidelines for maximizing productivity through indoor space design for telecommuters. Additionally, understanding the physiological response of individuals working in indoor spaces has attracted attention. This study applied mixed-reality environment to alter the design of the indoor space in real-time, while monitoring the task performance and representative psycho-physiological indicators (electroencephalogram and heart rate variability) of 30 individuals with telecommuting experience. To this end, four tasks, including spatial memory, attention, execution, and working memory, were conducted, and the psycho-physiological data from these tests were statistically analyzed. The results revealed that the design of the indoor space did not affect the spatial memory; however, the parasympathetic nerves were stimulated in visually non-preferred spaces, thus reducing mental stress and leading to high efficiency in short-term work. According to the Yerkes-Dodson law, the working memory of an individual is generally efficient and physically stable over time if they adjust to a preferred or decision-making space. Thus, the future design of telecommuting spaces must consider the type of work being done, and guidelines for spatial design should be developed by recognizing the psycho-physiological status of users, while increasing efficiency.

Circulating-tumor DNA Assessment in Diffuse Large B-cell Lymphoma to Determine Up-front Stem Cell Transplantation: A Pilot Study.

BACKGROUND/AIM: This study evaluated the possibility of clinical use of circulating-tumor DNA (ctDNA) as a biomarker to determine up-front autologous stem cell transplantation (auto-SCT) for patients with high-risk diffuse large B-cell lymphoma (DLBCL) in practice. PATIENTS AND METHODS: To explore the dynamics of ctDNA in DLBCL, blood samples were collected sequentially before and after treatment from patients with newly diagnosed DLBCL who received rituximab, cyclophosphamide, doxorubicin, vincristine, and prednisone (R-CHOP) chemotherapy. To conduct ctDNA genotyping and ctDNA monitoring simultaneously, targeted sequencing by cancer personalized profiling using deep sequencing was used. RESULTS: Ten patients between the ages of 50 and 60 years were enrolled. Based on the international prognostic index (IPI), seven patients were classified as high-IPI-risk group, and three patients were classified as low-IPI-risk group. The IPI risk group correlated with total metabolic tumor volume. All patients completed six cycles of R-CHOP chemotherapy, and seven patients achieved complete response. Changes in ctDNA mutation numbers did not correlate with changes in PET scan images and treatment response. In most high-risk patients, new mutations appeared in ctDNA after completion of chemotherapy that conceivably marked resistant clones. Notably, disease relapse did not occur in high-risk patients with poor prognostic mutations who underwent autologous SCT. CONCLUSION: ctDNA monitoring was meaningful in high-risk patients. Moreover, ctDNA and well-known prognostic factors should be considered in the decision making for auto-SCT. If a new genetic mutation in ctDNA with a negative prognosis would emerge during treatment, high-risk patients should consider auto-SCT.

Patterning Techniques in Coplanar Micro/Nano Capacitive Sensors.

Rapid technological advancements have led to increased demands for sensors. Hence, high performance suitable for next-generation technology is required. As sensing technology has numerous applications, various materials and patterning methods are used for sensor fabrication. This affects the characteristics and performance of sensors, and research centered specifically on these patterns is necessary for high integration and high performance of these devices. In this paper, we review the patterning techniques used in recently reported sensors, specifically the most widely used capacitive sensors, and their impact on sensor performance. Moreover, we introduce a method for increasing sensor performance through three-dimensional (3D) structures.

Nature-Inspired Chiral Structures: Fabrication Methods and Multifaceted Applications.

Diverse chiral structures observed in nature find applications across various domains, including engineering, chemistry, and medicine. Particularly notable is the optical activity inherent in chiral structures, which has emerged prominently in the field of optics. This phenomenon has led to a wide range of applications, encompassing optical components, catalysts, sensors, and therapeutic interventions. This review summarizes the imitations and applications of naturally occurring chiral structures. Methods for replicating chiral architectures found in nature have evolved with specific research goals. This review primarily focuses on a top-down approach and provides a summary of recent research advancements. In the latter part of this review, we will engage in discussions regarding the diverse array of applications resulting from imitating chiral structures, from the optical activity in photonic crystals to applications spanning light-emitting devices. Furthermore, we will delve into the applications of biorecognition and therapeutic methodologies, comprehensively examining and deliberating upon the multifaceted utility of chiral structures.

Conversion of the bronchial tree into a conforming electrode to ablate the lung nodule in a porcine model.

BACKGROUND: Radiofrequency ablation (RFA) is one of the treatment options for lung nodules. However, the need for exact delivery of the rigid metal electrode into the center of the target mass often leads to complications or suboptimal results. To overcome these limitations, a concept of conforming electrodes using a flexible material has been tested in this study. METHODS: A bronchoscopy-guided RFA (CAROL) under a temperature-controlled mode was tested in in-vivo and ex-vivo porcine lungs. Gallium-based liquid metal was used for turning the bronchial tree into temporary RF electrodes. A customized bronchoscopy-guided balloon-tipped guiding catheter (CAROL catheter) was used to make the procedure feasible under fluoroscopy imaging guidance. The computer simulation was also performed to gain further insight into the ablation results. Safety was also assessed including the liquid metal remaining in the body. RESULTS: The bronchial electrode injected from the CAROL catheter was able to turn the target site bronchial air pipe into a temporally multi-tined RF electrode. The mean volume of Gallium for each effective CAROL was 0.46 ± 0.47 ml. The ablation results showed highly efficacious and consistent results, especially in the peripheral lung. Most bronchial electrodes were also retrieved by either bronchoscopic suction immediately after the procedure or by natural expectoration thereafter. The liquid metal used in these experiments did not have any significant safety issues. Computer simulation also supports these results. CONCLUSION: The CAROL ablation was very effective and safe in porcine lungs showing encouraging potential to overcome the conventional approaches.

Lung cancer can be treated by inserting a metal device into the lung via the throat and using this to send radio waves into the cancer. However, using a rigid metal device can cause damage to other areas of the lung and can only treat small cancers. Here, we describe an alternative method to treat lung cancers in which liquid metal is used to fill the spaces within the lung closest to the cancer. We demonstrate that this method can be used to treat cancer in a swine model of lung cancer. Given the positive results we obtained, we think this approach should be tested in a clinical trial in human patients with lung cancer, as it might improve cancer treatment.

Enhancing immune protection against MERS-CoV: the synergistic effect of proteolytic cleavage sites and the fusion peptide and RBD domain targeting VLP immunization.

Introduction: The Middle East Respiratory Syndrome Coronavirus (MERS-CoV) is a zoonotic infectious virus that has caused significant outbreaks in the Middle East and beyond. Due to a highly mortality rate, easy transmission, and rapid spread of the MERS-CoV, it remains as a significant public health treat. There is currently no licensed vaccine available to protect against MERS-CoV. Methods: In this study, we investigated whether the proteolytic cleavage sites and fusion peptide domain of the MERS-CoV spike (S) protein could be a vaccine target to elicit the MERS-CoV S protein-specific antibody responses and confer immune protection against MERS-CoV infection. Our results demonstrate that immunization of the proteolytic cleavage sites and the fusion peptide domain using virus-like particle (VLP) induced the MERS-CoV S protein-specific IgG antibodies with capacity to neutralize pseudotyped MERS-CoV infection in vitro. Moreover, proteolytic cleavage sites and the fusion peptide VLP immunization showed a synergistic effect on the immune protection against MERS-CoV infection elicited by immunization with VLP expressing the receptor binding domain (RBD) of the S protein. Additionally, immune evasion of MERS-CoV RBD variants from anti-RBD sera was significantly controlled by anti-proteolytic cleavage sites and the fusion peptide sera. Conclusion and discussion: Our study demonstrates the potential of VLP immunization targeting the proteolytic cleavage sites and the fusion peptide and RBD domains of the MERS-CoV S protein for the development of effective treatments and vaccines against MERS-CoV and related variants.

Amplifying the Output of a Triboelectric Nanogenerator Using an Intermediary Layer of Gallium-Based Liquid Metal Particles.

The production of energy has become a major issue in today's world. Triboelectric nanogenerators (TENGs) are promising devices that can harvest mechanical energy and convert it into electrical energy. This study explored the use of Galinstan particles in the production of TENGs, which convert mechanical energy into electrical energy. During the curing process, the evaporation of the hexane solvent resulted in a film with varying concentrations of Galinstan particles. The addition of n-hexane during ultrasonication reduced the viscosity of the polydimethylsiloxane (PDMS) solution, allowing for the liquid metal (LM) particles to be physically pulverized into smaller pieces. The particle size distribution of the film with a Galinstan concentration of 23.08 wt.% was measured to be within a few micrometers through ultrasonic crushing. As the amount of LM particles in the PDMS film increased, the capacitance of the film also increased, with the LM/PDMS film with a 23.08% weight percentage exhibiting the highest capacitance value. TENGs were created using LM/PDMS films with different weight percentages and tested for open-circuit voltage, short-circuit current, and charge amount Q. The TENG with an LM/PDMS film with a 23.08% weight percentage had the highest relative permittivity, resulting in the greatest voltage, current, and charge amount. The use of Galinstan particles in PDMS films has potential applications in wearable devices, sensors, and biomedical fields.

Predictive role of absolute lymphocyte count in daratumumab-treated patients with relapsed/ refractory multiple myeloma.

BACKGROUND/AIMS: Daratumumab has shown an encouraging antitumor effect in patients with multiple myeloma (MM), and was known to alter the immune properties by off-targeting immunosuppressive cells. Here, we aimed to evaluate the change in absolute lymphocyte count (ALC) as a surrogate marker for predicting survival outcomes of patients treated with daratumumab. METHODS: Between 2018 and 2021, the medical records of patients with relapsed/refractory MM (RRMM) treated with daratumumab monotherapy at 10 centers in South Korea were reviewed. We collected the ALC data at pre-infusion (D0), day 2 after the first infusion (D2), and prior to the third cycle of daratumumab therapy (D56). RESULTS: Fifty patients who were administered at least two cycles of daratumumab were included. Overall response rate was 54.0% after two cycles of daratumumab treatment. On D2, almost all patients experienced a marked reduction in ALC. However, an increase in ALC on D56 (ALCD56) was observed in patients with non-progressive disease, whereas failure of ALC recovery was noted in those with progressive disease. Patients with ALCD56 > 700/µL (n = 39, 78.0%) had prolonged progression- free survival (PFS) and overall survival (OS) than those with ALCD56 ≤ 700/µL (median PFS: 5.8 months vs. 2.6 months, p = 0.025; median OS: 24.1 months vs. 6.1 months, p = 0.004). In addition, ALCD56 >700/µL was a significant favorable prognostic factor for PFS (hazard ratio [HR], 0.22; p = 0.003) and OS (HR, 0.23; p = 0.012). CONCLUSION: Increase in ALC during daratumumab treatment was significantly associated with prolonged survival outcomes in patients with RRMM. The ALC value can predict clinical outcomes in patients treated with daratumumab.

Severe congenital neutropenia mimicking chronic idiopathic neutropenia: a case report.

Severe chronic neutropenia is classified as severe congenital, cyclic, autoimmune, or idiopathic. However, there is a lot of uncertainty regarding the diagnosis of severe congenital neutropenia (SCN) and chronic idiopathic neutropenia, and this uncertainty affects further evaluations and treatments. A 20-year-old man presented with fever and knee abrasions after a bicycle accident. On admission, his initial absolute neutrophil count (ANC) was 30/µL. He had no medical history of persistent severe neutropenia with periodic oscillation of ANC. Although his fever resolved after appropriate antibiotic therapy, ANC remained at 80/µL. Bone marrow (BM) aspiration and biopsy were performed, and a BM smear showed myeloid maturation arrest. Moreover, genetic mutation test results showed a heterozygous missense variant in exon 4 of the neutrophil elastase ELANE: c597+1G>C (pV190-F199del). The patient was diagnosed with SCN. After discharge, we routinely checked his ANC level and monitored any signs of infection with minimum use of granulocyte colony-stimulating factor (G-CSF), considering its potential risk of leukemic transformation. Considering that SCN can be fatal, timely diagnosis and appropriate management with G-CSF are essential. We report the case of a patient with SCN caused by ELANE mutation who had atypical clinical manifestations. For a more accurate diagnosis and treatment of severe chronic neutropenia, further studies are needed to elucidate the various clinical features of ELANE.

Eco-Friendly Keratin-Based Additives in the Polymer Matrix to Enhance the Output of Triboelectric Nanogenerators.

A triboelectric nanogenerator (TENG) is an energy generator that converts mechanical energy into electrical energy using triboelectricity at a nanoscale. Given their potential application as power sources in electronic devices, various attempts have been made to improve their output performance. Here, we present an eco-friendly, low-cost, and facile fabrication method to enhance TENG characteristics with keratin protein additives. Keratin sources, human and cat hair, are processed into powder and added to the friction layer, which increases their positive charge affinity, thereby boosting the output performance of the TENG. The output performances of the keratin-added TENG (K-TENG) are measured in the vertical contact-separation mode, with both additives having the highest output values at 5 wt % load. The K-TENG generates more output voltage and current values than the pristine TENG by 90 and 208%, respectively. Hence, we conclude that this method would potentially promote TENG as a strong candidate for a competitive "green" energy harvesting device in future electronics applications.

Simple Fabrication of Photodetectors Based on MoS2 Nanoflakes and Ag Nanoparticles.

Low-dimensional transition-metal dichalcogenides (TMDs) have recently emerged as promising materials for electronics and optoelectronics. In particular, photodetectors based on mono- and multilayered molybdenum disulfide (MoS2) have received much attention owing to their outstanding properties, such as high sensitivity and responsivity. In this study, photodetectors based on dispersed MoS2 nanoflakes (NFs) are demonstrated. MoS2 NFs interact with Ag nanoparticles (NPs) via low-temperature annealing, which plays a crucial role in determining device characteristics such as good sensitivity and short response time. The fabricated devices exhibited a rapid response and recovery, good photo-responsivity, and a high on-to-off photocurrent ratio under visible light illumination with an intensity lower than 0.5 mW/cm2.

Results of Multicenter Phase II Study With Imatinib Mesylate in Allogeneic Recipients With Steroid-Refractory Chronic GVHD.

In this multicenter phase II study, we evaluated the safety and efficacy of imatinib in patients with steroid-resistant chronic graft-versus-host disease (cGVHD) and evaluated the quality of life (QOL) of the enrolled patients using the Short Form 36 (SF-36) health survey questionnaire. Thirty-six patients who were diagnosed with steroid-refractory cGVHD and treated with imatinib between March 2013 and February 2019 received 100 mg/day of imatinib for 2 weeks. Depending on the patient's condition and investigator's decision, the imatinib dose was allowed to be increased by 100 mg every 2 weeks up to 400 mg/day. Patients who achieved stable disease (SD), partial remission (PR), and complete remission (CR) at 3-month response evaluations continued imatinib for up to 6 months. The majority of the patients had multi-organ cGVHD, with skin (63.9%), lungs (44.4%), mouth (38.9%), and eyes (38.9%) as the most common sites. The overall response rate was 58.3%, including 3 and 18 patients with CR and PR, respectively, and an overall decline in National Institutes of Health (NIH) severity scores was observed at study completion in the absence of significant adverse effects. The overall response rates were 70.5%, 66.7%, 34.8%, and 25% in patients with gastrointestinal, liver, skin, and lung cGVHD, respectively. Factors representing emotional well-being were significantly improved based on the patient-reported QOL evaluation using SF-36. The effect of imatinib on steroid tapering, which was notable in responders, was also present in 50% of those who achieved SD without worsening cGVHD. Imatinib exhibited therapeutic efficacy in steroid-refractory and steroid-dependent cGVHD with tolerable toxicity.Clinical Trial Registration: KCT0006785.

Light and shade of ruxolitinib: positive role of early treatment with ruxolitinib and ruxolitinib withdrawal syndrome in patients with myelofibrosis.

INTRODUCTION: Myelofibrosis (MF) is characterized by ineffective and hepatosplenic extramedullary hematopoiesis due to fibrotic changes in the bone marrow and systemic manifestations due to aberrant cytokine release. Ruxolitinib (RUX) is the first JAK1/JAK2 inhibitor that is clinically approved to treat splenomegaly by ameliorating inflammatory cytokines and myeloproliferation in MF. AREAS COVERED: Patients with less advanced MF may also achieve better outcome and successful treatment with RUX. However, approximately 40% of the patients failed to achieve a stable response or have shown to be intolerant to RUX, and most of them discontinued RUX. In patients who need to discontinue or reduce the dose of RUX for any reason, RUX is known to induce a paradoxical accumulation of JAK activation loop phosphorylation that is causing RUX discontinuation syndrome (RDS). To review the topic of MF and RUX, we searched relevant literatures using PubMed. EXPERT OPINION: RUX treatment in lower IPSS risk patients who present with splenomegaly and disease-associated symptoms can be helpful. A careful discontinuation strategy with steroids may reduce the probability of RDS, and the recognition of RDS with early re-introduction of RUX is important in the treatment of severe cases of RDS.

Clinical Implication of KRAS Mutation Variants in Patients With Resected Colon Cancer.

Aim: This study evaluated the clinical implication of KRAS proto-oncogene, GTPase (KRAS) mutation variants in patients with resected colon cancer (CC). Patients and Methods: We retrospectively reviewed 482 patients diagnosed with CC who underwent curative surgical resection at Kyungpook National University Chilgok Hospital. The inclusion criteria were: Pathologically diagnosed with primary CC; stage I-III CC according to the 7th edition of American Joint Committee on Cancer staging system; and with available test results for KRAS mutation status. In total, 345 patients met these criteria and were included in this study. Results: Among the 345 patients, 140 (40.6%) exhibited KRAS mutations, with their incidences as follows: 90/140 (64.3%) in exon 2 codon 12, 37/140 (26.4%) in exon 2 codon 13, 1/140 (0.1%) in exon 3 codon 59, 7/140 (5.0%) in exon 3 codon 61, and 5/140 (3.6%) in exon 4 codon 146. KRAS mutation status was not a significant prognostic factor for disease-free survival or overall survival. Although there were no significant differences in survival between patients with exon 2 codon 12 and exon 2 codon 13 mutations, poorer disease-free survival (p=0.085) and overall survival (p=0.005) were seen in those with exon 3 codon 61 mutation than in others. Conclusion: KRAS mutation status was not correlated with survival, but exon 3 codon 61 mutation might be a factor for poor prognosis in patients after resection of CC.

Favorable Long-Term Outcomes with Autologous Stem Cell Transplantation for High-Risk Multiple Myeloma Patients with a Positive Result On 18F-FDG PET/CT at Baseline.

BACKGROUND: 18F-fluorodeoxyglucose positron emission tomography/computed tomography (18F-FDG PET/CT) is a useful tool for identifying high-risk features in patients with newly diagnosed multiple myeloma (NDMM). This study evaluated the role of autologous stem cell transplantation (ASCT) in patients presenting with positive results on PET/CT scans. MATERIALS AND METHODS: The medical records of 210 patients who underwent PET/CT at diagnosis were retrospectively reviewed. Eligible patients for transplantation proceeded to upfront ASCT with high-dose chemotherapy (HDT) after induction therapy with novel agents. RESULTS: The presence of a number of focal lesions (FL) >3 and extramedullary disease (EMD) occurred in 111 and 35 patients, respectively. ASCT was performed in 54 patients. Among patients with FL > 3, those treated with ASCT showed a prolonged 2-year progression-free survival (PFS) and overall survival (OS) rates compared to those not treated with ASCT (PFS, 60.2% vs. 23.5%, P < 0.001; OS, 91.7% vs. 63.6%, P = 0.005). In patients with FL ≤ 3, treatment by ASCT was associated with a higher 2-year PFS rate than no treatment by ASCT (74.0% vs. 54.9%, P = 0.040). The OS of patients treated with ASCT was not significantly longer than that of patients not treated with ASCT (P = 0.115). In multivariate analysis, FL > 3, Revised International Staging System (R-ISS), and upfront ASCT were independent prognostic factors for PFS and OS. CONCLUSION: Presenting FL > 3 on baseline PET/CT represents a high-risk feature in patients with NDMM. Frontline ASCT with HDT prolonged the survival of patients with FL > 3.

Intaglio Contact Printing of Versatile Carbon Nanotube Composites and Its Applications for Miniaturizing High-Performance Devices.

Composites based on carbon nanotubes (CNTs) are promising patternable materials that can be engineered to incorporate the outstanding properties of CNTs into various applications via printing technologies. However, conventional printing methods for CNTs require further improvement to overcome the major drawbacks that limit the patterning resolution and target substrate. Herein, an intaglio contact printing method based on a CNT/paraffin composite is presented for realizing highly precise CNT network patterns without restrictions on the substrate. In this method, the CNT/paraffin composite can be patterned with a high resolution (<10 µm) and neatly transferred onto various substrates with a wide range of surface energies, including human skin. The patterned composite exhibits high durability against structural deformations, and structural damage caused by fatigue accumulation can be cured in a few seconds. In addition, miniaturized sensing and energy-harvesting applications are demonstrated with high performances. The present method facilitates the rapid fabrication of highly precise interdigitated electrodes via one-step printing, enabling high-performance operation and miniaturization of the devices. It is anticipated that these results will not only spur the further development of various applications of CNTs but also contribute to advances in soft lithography methods applicable to many fields of science and engineering.

Patients presenting high fever with lymphadenopathy after COVID-19 vaccination were diagnosed with hemophagocytic lymphohistiocytosis.

BACKGROUND: The coronavirus disease 2019 (COVID-19) pandemic caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is still continuing worldwide. Currently, two mRNA-based vaccines and two DNA vaccines using an adenovirus vector are representative vaccines. Since the SARS-CoV-2 vaccines began to be administered, a significant decrease in new infections and COVID-19-associated death has been reported. However, various adverse events from mild symptoms to death have also been described after vaccination. CASE DESCRIPTION: Patients with high fever and lymphadenopathy who are diagnosed with hemophagocytic lymphohistiocytosis (HLH) after COVID-19 vaccination are very rare, and there is no standard management guideline for these patients thus far. Herein, we described two cases of HLH after the administration of an mRNA-based vaccine and adenovirus vector vaccine. DISCUSSION: HLH is a life-threatening hyperinflammatory syndrome that occurs due to persistent stimulation of lymphocytes and histiocytes in various underlying conditions at all ages. Although the exact mechanisms and risk factors of COVID-19 vaccination-related HLH are still unknown, vigorous immune stimulation may trigger a huge cytokine storm, rarely resulting in HLH. It is important to note that early suspicion by clinicians can lower the mortality rate.

Dynamic properties of floating floor system and its influence on heavy-weight impact sound in residential buildings.

We investigated the effects of a floating floor on heavy impact sound in the low-frequency range below 100 Hz with focus on the structural vibration. To verify the mechanism of amplifying the floor impact sound, field measurements were conducted before and after the installation of a floating floor while the other conditions were kept constant. Field tests were performed on five apartment units where the material properties of the resilient materials in the floating floors differed. Slab accelerations and sound pressure levels were measured simultaneously. The test results indicated that the low-frequency responses of slab acceleration and the corresponding heavy impact sounds were amplified in all apartment units after the installation of the floating floor, while high-frequency responses greater than 100 Hz were significantly reduced. The amplified responses were attributed to the interactions between the mortar plate (floating floor) and concrete slab, which were connected by a resilient material layer. The degree of amplification tended to increase as the loss factor of the resilient material decreased while the amplified frequency range was determined by the stiffness of the resilient material layer. The result was numerically verified using a simplified mass-spring model.