Recent Developments in (K, Na)NbO3-Based Lead-Free Piezoceramics.

(K0.5Na0.5)NbO3 (KNN)-based ceramics have been extensively investigated as replacements for Pb(Zr, Ti)O3-based ceramics. KNN-based ceramics exhibit an orthorhombic structure at room temperature and a rhombohedral-orthorhombic (R-O) phase transition temperature (TR-O), orthorhombic-tetragonal (O-T) phase transition temperature (TO-T), and Curie temperature of -110, 190, and 420 °C, respectively. Forming KNN-based ceramics with a multistructure that can assist in domain rotation is one technique for enhancing their piezoelectric properties. This review investigates and introduces KNN-based ceramics with various multistructures. A reactive-templated grain growth method that aligns the grains of piezoceramics in a specific orientation is another approach for improving the piezoelectric properties of KNN-modified ceramics. The piezoelectric properties of the [001]-textured KNN-based ceramics are improved because their microstructures are similar to those of the [001]-oriented single crystals. The improvement in the piezoelectric properties after [001] texturing is largely influenced by the crystal structure of the textured ceramics. In this review, [001]-textured KNN-based ceramics with different crystal structures are investigated and systematically summarized.

The Influence of Styrene Content in Solution Styrene Butadiene Rubber on Silica-Filled Tire Tread Compounds.

In tire tread applications, achieving enhanced abrasion resistance, wet grip, and rolling resistance is crucial for optimizing overall performance. To realize improvements in these attributes for silica-filled tire tread compounds, it becomes imperative to improve the dispersity of silica filler by investigating the effect of each component in the tire tread compound. In this work, we study the effect of styrene content within solution styrene butadiene rubber (SSBR) on the properties of tire tread compounds. A higher styrene segment within SSBR contributes to increased silica dispersion and crosslink density. Thus, tire tread compounds featuring SSBR with increased styrene content not only improve physical and mechanical properties, but also enhance major characteristics tailored for tire tread applications. These findings provide valuable insights into advancing the reinforced performance of tire tread compounds through the strategic utilization of SSBR enriched in styrene content.

Gastrodia elata rhizoma ameliorates thioacetamide-induced liver injury in dogs.

Objective: The study aimed to investigate the hepatoprotective effects of Gastrodia elata rhizome (GR) on thioacetamide (TAA)-induced liver injury in dogs. We evaluated serum biochemical and hematological parameters, with emphasis on alanine transaminase (ALT), alanine phosphates (ALP), and nitric oxide (NO) levels, in dogs with TAA-induced liver injury. Materials and Methods: The animals were divided into a control group (Con), TAA group, Silymarin group (Sil, 50 mg/kg), Gastrodia rhizome low dose (GRL) (low) + TAA, GRH (high) + TAA, and GR high-dose group (GRH) control group. GRL and GRH were given daily at 50 and 100 mg/kg, respectively. TAA was given on days 1, 4, and 7 at a dose of 300 mg/kg. Results: GR significantly reduced liver injury in treated animals, as indicated by lowered levels of ALT (about 32% at day 21 in both GRL + TAA and GRH + TAA groups), ALP (about 17% and 21% at day 21 in both GRL + TAA, GRH + TAA groups, respectively), and NO (about 36% at day 21 in both GRL + TAA, GRH + TAA groups) compared to the TAA control group. Hematological parameters showed mild changes during the experiment. High-performance liquid chromatography analysis revealed gastrodin, a major component of the GR extract, constitutes 2.6% of the extract. Conclusion: The GR demonstrated significant hepatoprotective effects against TAA-induced liver injury in dogs. The study provides evidence for the potential therapeutic use of GR in the management of liver diseases.

Dual-Cure Adhesives Using a Newly Synthesized Itaconic Acid-Based Epoxy Acrylate Oligomer.

Herein, a novel biomass-derived itaconic acid (IA)-based epoxy acrylate oligomer (EAO) is synthesized by means of the esterification reaction of the epoxy group of bisphenol A diglycidyl ether (BADGE) with the carboxylic group of IA. The detailed chemical structure of the as-prepared bisphenol A diglycidyl ether diitaconate (BI) is characterized via the KOH value, FT-IR spectrum, and 1H-NMR spectrum. Further, a dual-cure adhesive system is formulated using BADGE, acrylic acid, and trimethylolpropane triacrylate with various BI contents, and the adhesive performance is investigated by measuring the thermal stability, adhesive properties, pencil hardness, and surface energy properties. Thus, the dual-cure adhesive with a BI content of 0.3 mol is shown to provide excellent thermal stability, along with an adhesive strength of 10.7 MPa, a pencil hardness of 2H, and a similar surface energy to that of a typical polycarbonate film. In addition, the properties of the BI-based dual-cure adhesive are compared with those of the dual-cure adhesives based on bisphenol A glycerolate diacrylate or bisphenol A glycerolate dimethacrylate.

Brain-wide representations of behavior spanning multiple timescales and states in C. elegans.

Changes in an animal's behavior and internal state are accompanied by widespread changes in activity across its brain. However, how neurons across the brain encode behavior and how this is impacted by state is poorly understood. We recorded brain-wide activity and the diverse motor programs of freely moving C. elegans and built probabilistic models that explain how each neuron encodes quantitative behavioral features. By determining the identities of the recorded neurons, we created an atlas of how the defined neuron classes in the C. elegans connectome encode behavior. Many neuron classes have conjunctive representations of multiple behaviors. Moreover, although many neurons encode current motor actions, others integrate recent actions. Changes in behavioral state are accompanied by widespread changes in how neurons encode behavior, and we identify these flexible nodes in the connectome. Our results provide a global map of how the cell types across an animal's brain encode its behavior.

Effect of Peel Ply on Resin Flow during Vacuum Infusion.

Although various simulations have been conducted for the vacuum infusion process, most of the studies have considered only fabrics and flow medium and ignored the effect of peel ply. However, peel ply can affect resin flow because it is placed between the fabrics and flow medium. To verify this, permeability of two types of peel plies was measured, and it was found that the permeability between the peel plies differed significantly. Moreover, the permeability of the peel plies was lower than that of the carbon fabric; thus, peel ply can cause a bottleneck in the flow in the out-of-plane direction. Some 3D flow simulations were conducted in cases of no peel ply and for two types of the peel plies to confirm the effect of peel ply, and experiments were also conducted for two types of the peel plies. It was observed that filling time and flow pattern were highly dependent on the peel plies. The smaller permeability of peel ply has, the greater effect of peel ply is. These results indicate that the permeability of peel ply is one of the dominant factors and should be considered in process design in vacuum infusion. Additionally, by adding one layer of peel ply and applying permeability, the accuracy of flow simulations can be improved for filling time and pattern.

Dissecting the functional organization of the C. elegans serotonergic system at whole-brain scale.

Serotonin influences many aspects of animal behavior. But how serotonin acts on its diverse receptors across the brain to modulate global activity and behavior is unknown. Here, we examine how serotonin release in C. elegans alters brain-wide activity to induce foraging behaviors, like slow locomotion and increased feeding. Comprehensive genetic analyses identify three core serotonin receptors (MOD-1, SER-4, and LGC-50) that induce slow locomotion upon serotonin release and others (SER-1, SER-5, and SER-7) that interact with them to modulate this behavior. SER-4 induces behavioral responses to sudden increases in serotonin release, whereas MOD-1 induces responses to persistent release. Whole-brain imaging reveals widespread serotonin-associated brain dynamics, spanning many behavioral networks. We map all sites of serotonin receptor expression in the connectome, which, together with synaptic connectivity, helps predict which neurons show serotonin-associated activity. These results reveal how serotonin acts at defined sites across a connectome to modulate brain-wide activity and behavior.

Monitoring lesion activity on primary teeth with CP-OCT and SWIR reflectance imaging.

OBJECTIVE: The purpose of this study was to use cross polarization optical coherence tomography (CP-OCT) and short wavelength infrared imaging (SWIR) reflectance imaging to monitor changes in the structure and activity of early occlusal caries on primary teeth over a period of 6 months during intervention with fluoride. METHODS: Participants (n = 29) aged 6-10 each with two suspected active occlusal lesions on primary teeth completed the study. Fluoride varnish was applied to tooth surfaces every 3-months and participants were instructed to brush twice daily with a fluoride toothpaste. Images were acquired using CP-OCT every 3 months for 6 months. SWIR reflectance images were acquired during forced air-drying of the lesions for 30 s at 0 and 6-months. RESULTS: Most of the 42 lesions appeared initially active at baseline. Only 6 lesions appeared arrested at baseline based on the presence of a highly mineralized transparent surface layer (TSL) in CP-OCT images. At 6 months, 14 of the lesions appeared arrested including the 6 initially arrested lesions and the TSL thickness increased significantly (p < 0.0001). The mean lesion depth (Ld) and the integrated reflectivity over the lesion depth (ΔR) increased significantly (p < 0.05) after 6 months for the 42 lesions analyzed. SWIR reflectance images showed that there was a significantly higher (p < 0.05) delay before changes in intensity were measured for active lesions versus arrested lesions during lesion drying. CONCLUSION: CP-OCT was able to monitor changes in lesion structure and activity including the formation of a highly mineralized TSL indicative of lesion arrest during nonsurgical intervention. Time-resolved SWIR reflectance imaging also shows that there are differences in the dehydration kinetics between active and arrested lesions. This study demonstrates two independent imaging methods that can be used to monitor changes in lesion activity over time.

Artificial Action Potential and Ionic Power Device Inspired by Ion Channels and Excitable Cell.

In vivo, the membrane potential of the excitable cell working by ion gradients plays a significant role in bioelectricity generation and nervous system operation. Conventional bioinspired power systems generally have adopted ion gradients, but overlook the functions of ion channels and Donnan effect to generate efficient ion flow in the cell. Here, cell-inspired ionic power device implementing the Donnan effect using multi-ions and monovalent ion exchange membranes as artificial ion channels is realized. Different ion-rich electrolytes on either side of the selective membrane generate the ion gradient potentials with high ionic currents and reduce the osmotic imbalance of the membrane. Based on this device, the artificial neuronal signaling is presented by the mechanical switching system of the ion selectivity like mechanosensitive ion channels in a sensory neuron. Compared with reverse electrodialysis, which requires a low concentration, a high-power device with ten times the current and 8.5 times the power density is fabricated. This device activates grown muscle cells by increasing power through serial connection like an electric eel, and shows the possibility of an ion-based artificial nervous system.

Quality Characteristics of Rice-Based Ice Creams with Different Amylose Contents.

Ice cream consumption has increased over the years. In this study, we investigated the potential of using rice varieties with varying amylose contents for ice cream production. We analyzed the physical and chemical properties and sensory quality characteristics (appearance, taste, texture, chewiness, aroma, and rice flavor) of rice-based ice cream made from five varieties with low and high amylose levels. To make the ice cream, we ground rice into a fine powder and combined it with skim milk powder, butter, sugar, glycerin esters of fatty acids, locust bean gum, and water to form a gelatinized mixture. This mixture was then aged, frozen, and hardened. The ice cream's key quality characteristics, such as viscosity (2170-25,030 cP), hardness (4.27-49.55 N cm-2), and overrun (17.95-46.99%), showed a wide range. Ice cream made from Saemimyeon (high amylose content rice variety) exhibited the highest hardness value (49.55 N cm-2) among the varieties tested, but had relatively low viscosity (4030 cP), overrun (17.95%), and drip-through (0.75 g/min) values. These findings suggest that rice varieties with different amylose contents are suitable for making ice cream and have the potential to expand the rice processing market and increase its value.

Dissecting the Functional Organization of the C. elegans Serotonergic System at Whole-Brain Scale.

Serotonin controls many aspects of animal behavior and cognition. But how serotonin acts on its diverse receptor types in neurons across the brain to modulate global activity and behavior is unknown. Here, we examine how serotonin release from a feeding-responsive neuron in C. elegans alters brain-wide activity to induce foraging behaviors, like slow locomotion and increased feeding. A comprehensive genetic analysis identifies three core serotonin receptors that collectively induce slow locomotion upon serotonin release and three others that interact with them to further modulate this behavior. The core receptors have different functional roles: some induce behavioral responses to sudden increases in serotonin release, whereas others induce responses to persistent release. Whole-brain calcium imaging reveals widespread serotonin-associated brain dynamics, impacting different behavioral networks in different ways. We map out all sites of serotonin receptor expression in the connectome, which, together with synaptic connectivity, helps predict serotonin-associated brain-wide activity changes. These results provide a global view of how serotonin acts at defined sites across a connectome to modulate brain-wide activity and behavior.

Enhanced Mechanical and Thermal Properties of Chain-Extended Waterborne Polyurethane Coatings with Cellulose Acetate Butyrate.

A series of waterborne polyurethane (WPU) dispersions were prepared by chain-extending a prepolymer made of polyester diol, isophorone diisocyanate, and dimethylol propionic acid using cellulose acetate butyrate (CAB). The particle size and viscosity of the WPU dispersion were measured. In addition, we investigated the effects of CAB on the thermal, mechanical, and optical properties of WPU films. The use of CAB effectively improved the crosslinking degree of the WPUs, increasing the thermal stability and water resistance of the corresponding films. In particular, CAB increased the tensile strength of the WPU films up to 67%, while maintaining their elongation at break unchanged. In addition, CAB improved the optical transmittance by reducing the microphase separation between the soft and hard segments of PU. The rough surface structure of the WPU films formed by CAB led to improved matting properties.

Computational Approach to the Surface-Crosslinking Process of Superabsorbent Polymer via Central Composite Design.

The improvement of gel strength and absorption properties through the surface-crosslinking of superabsorbent polymers (SAPs) is essential for sanitary industry applications. We prepared core-SAP via aqueous solution copolymerization, and then surface-crosslinked the core-SAP under various conditions. The structure of the SAP was characterized using Fourier transform infrared (FT-IR) spectroscopy. Central composite design (CCD) of response surface methodology (RSM) has been applied to determine the optimum surface-crosslinking conditions such as surface-crosslinker content, reaction temperature, and reaction time. The optimal surface-crosslinking conditions were identified at a surface-crosslinker content of 2.22 mol%, reaction temperature of 160 °C, and reaction time of 8.7 min. The surface-crosslinked SAP showed excellent absorbency under load of 50 g/g with a permeability of 50 s. Other absorption properties were also evaluated by measuring the free absorbency and centrifuge retention capacity in saline solution.

Factors Associated with Pre-Dental Students' Intention and Willingness to Serve in the Underserved Community and Vulnerable Population.

A potential solution to the problem of how to increase access to dental care for the underserved and vulnerable populations is to establish an early pipeline of underrepresented and minority college students for a career in dentistry. This study aims to explore factors associated with such pre-dental students' future intentions to serve. A cross-sectional design was utilized with 144 participants completing the questionnaire with four sections, including participants' demographics, experience in access to dental care, psychosocial factors, and intention to serve the underserved and vulnerable populations. Descriptive statistics, chi-squared test, and logistic regression were used for statistical analyses. A positive attitude (OR = 12.03) and higher confidence towards addressing access to dental care issues (OR = 10.43) were found to be the strongest factor for higher intention to serve the underserved and vulnerable populations. Higher knowledge on the prevalence of dental caries among children (OR = 3.18) and participants who experienced difficulty in getting a dental appointment, or finding an available dentist when needed (OR = 3.43), were also associated with higher intention. Identifying key factors associated with higher intention to serve the underserved and vulnerable populations as a future dentist may facilitate workforce recruitment in the Health Profession Shortage Areas (HPSAs).

pH and Redox-Dual Sensitive Chitosan Nanoparticles Having Methyl Ester and Disulfide Linkages for Drug Targeting against Cholangiocarcinoma Cells.

The aim of this study is to prepare pH- and redox-sensitive nanoparticles for doxorubicin (DOX) delivery against DOX-resistant HuCC-T1 human cholangiocarcinoma (CCA) cells. For this purpose, L-histidine methyl ester (HIS) was attached to chitosan oligosaccharide (COS) via dithiodipropionic acid (abbreviated as ChitoHISss). DOX-incorporated nanoparticles of ChitoHISss conjugates were fabricated by a dialysis procedure. DOX-resistant HuCC-T1 cells were prepared by repetitive exposure of HuCC-T1 cells to DOX. ChitoHISss nanoparticles showed spherical morphology with a small diameter of less than 200 nm. The acid pH and glutathione (GSH) addition induced changes in the size distribution pattern of ChitoHISss nanoparticles from a narrow/monomodal distribution pattern to a wide/multimodal pattern and increased the fluorescence intensity of the nanoparticle solution. These results indicate that a physicochemical transition of nanoparticles can occur in an acidic pH or redox state. The more acidic the pH or the higher the GSH concentration the higher the drug release rate was, indicating that an acidic environment or higher redox states accelerated drug release from ChitoHISss nanoparticles. Whereas free DOX showed decreased anticancer activity at DOX-resistant HuCC-T1 cells, DOX-incorporated ChitoHISss nanoparticles showed dose-dependent anticancer activity. Intracellular delivery of DOX-incorporated ChitoHISss nanoparticles was relatively increased at an acidic pH and in the presence of GSH, indicating that DOX-incorporated ChitoHISss nanoparticles have superior acidic pH- and redox-sensitive behavior. In an in vivo tumor xenograft model, DOX-incorporated ChitoHISss nanoparticles were specifically delivered to tumor tissues and then efficiently inhibited tumor growth. We suggest that ChitoHISss nanoparticles are a promising candidate for treatment of CCA.

Can the Rhomboid Major Muscle Be Used to Identify the Thoracic Spinal Segment on Ultrasonography? A Prospective Observational Study.

OBJECTIVE: We investigated the thoracic segment corresponding to the inferior margin of the rhomboid major muscle (RMM) using ultrasound (US) to evaluate its potential as a reliable anatomic landmark for segment identification. DESIGN: A prospective observational study. SETTING: An operating room. SUBJECTS: Patients who underwent procedures around the thoracic spine. METHODS: Four hundred segments corresponding to the RMM's inferior margin were identified through the use of paravertebral sagittal US and confirmed by fluoroscopy in 100 participants in the prone position with upward and downward shoulder rotation, comprising four datasets (up-right, up-left, down-right, and down-left). The US identification of the RMM's inferior margin was dichotomously scored (clear vs ambiguous). Each dataset was divided into two groups (dominant segment group vs remaining segments group), which were compared. Factors relevant to the dominant segment associated with the RMM's inferior border were determined through univariable analyses. RESULTS: The T6 segment was observed most commonly (59.5%) along the RMM's inferior border on paravertebral sagittal US acquired in the prone position, followed by T5 (25.0%), T7 (12.8%), and T4 (2.7%). The segments corresponding to the RMM remained unchanged by shoulder posture in most participants (n = 74, 74%). The RMM's inferior border was clearly distinguishable in 330 cases (82.5%). When the RMM's inferior border was clearly identified, the corresponding segment was likely to match T6 in all datasets, with odds ratios ranging from 3.24 to 6.2. CONCLUSIONS: The RMM's inferior border over the transverse process corresponded to T6 most frequently on paravertebral sagittal US, and its deep fascia was clearly visible in most cases.

Effect of adaptive opportunity on cognitive performance in warm environments.

This study investigates the hypothesis that thermal adaptive opportunities available to building occupants affect their cognitive performance and mental workload. The change rate of cerebral blood flow (Δtotal Hb) was measured by Near Infra-Red Spectroscopy (NIRS) and interpreted as the metric of mental workload in subjects while performing cognitive tasks (n-back tests) with, or without access to thermal adaptive opportunities such as regulable fan-induced air flow and clothing insulation adjustment. Participants underwent three experimental conditions: Condition 22 (operative temperature to = 22 °C without adaptive opportunities), Condition 28 (to = 28 °C without adaptive opportunities), and Condition 28w (to = 28 °C with adaptive opportunities. Under Condition 28w, thermal sensations were neutral, while thermal satisfaction and comfort levels were higher than those reported for Condition 28, and the same as those reported under Condition 22. The subjects' mean skin temperature under Condition 22 was the lowest at 32.1 °C, followed by Condition 28w at 33.6 °C, while the highest, 34.5 °C was recorded in Condition 28. No significant differences were observed in accuracy and reaction time of n-back tests between the three different environmental conditions. Under Condition 28w, mental fatigue levels and the left side Δ total Hb results were lowest out of all three conditions, although the differences failed to reach statistical significance. Availability of adaptive opportunities plays a role in expanding the range of thermal environmental conditions for optimal cognitive task performance in a moderately warm environment (to = 28 °C). This finding cannot be fully explained by the direct effect of adaptive behaviours on human heat balance and associated physiological responses, but the unexplained component may potentially be attributed to the psychological dimension of human adaptive response. These findings and their interpretation within an adaptive comfort framework are consistent with the extended-U hypothesis of cognitive performance.

Botulinum Toxin Type A for Lumbar Sympathetic Ganglion Block in Complex Regional Pain Syndrome: A Randomized Trial.

BACKGROUND: The present study was designed to test the hypothesis that botulinum toxin would prolong the duration of a lumbar sympathetic block measured through a sustained increase in skin temperature. The authors performed a randomized, double-blind, controlled trial to investigate the clinical outcome of botulinum toxin type A for lumbar sympathetic ganglion block in patients with complex regional pain syndrome. METHODS: Lumbar sympathetic ganglion block was conducted in patients with lower-extremity complex regional pain syndrome using 75 IU of botulinum toxin type A (botulinum toxin group) and local anesthetic (control group). The primary outcome was the change in the relative temperature difference on the blocked sole compared with the contralateral sole at 1 postoperative month. The secondary outcomes were the 3-month changes in relative temperature differences, as well as the pain intensity changes. RESULTS: A total of 48 participants (N = 24/group) were randomly assigned. The change in relative temperature increase was higher in the botulinum toxin group than in the control group (1.0°C ± 1.3 vs. 0.1°C ± 0.8, respectively; difference: 0.9°C [95% CI, 0.3 to 1.5]; P = 0.006), which was maintained at 3 months (1.1°C ± 0.8 vs. -0.2°C ± 1.2, respectively; P = 0.009). Moreover, pain intensity was greatly reduced in the botulinum toxin group compared with the control group at 1 month (-2.2 ± 1.0 vs. -1.0 ± 1.6, respectively; P = 0.003) and 3 months (-2.0 ± 1.0 vs. -0.6 ± 1.6, respectively; P = 0.003). There were no severe adverse events pertinent to botulinum toxin injection. CONCLUSIONS: In patients with complex regional pain syndrome, lumbar sympathetic ganglion block using botulinum toxin type A increased the temperature of the affected foot for 3 months and also reduced the pain.

Association of nasal septal deviation with the incidence of anxiety, depression, and migraine: A national population-based study.

BACKGROUND & AIMS: Nasal obstruction caused by nasal septal deviation is very bothersome and, therefore, can affect the patient's emotional state. However, little is known about the effect of nasal septal deviation (NSD) on the neuropsychiatric aspects of patients. Therefore, this study aims to verify the higher incidence of anxiety, depression, and migraine in patients diagnosed with NSD compared to general populations using big data. METHODS: This retrospective cohort study collected subjects from the Korean National Health Insurance Service (NHIS) database. Adjustments were made to minimize the confounding of variables for age, sex, residence type, income levels, hypertension, diabetes, dyslipidemia, rhinitis, and chronic rhinosinusitis between the two groups. The primary endpoint of this study was newly diagnosed anxiety, depression, and migraine between January 2009 and December 2018. Kaplan-Meier survival curves, logarithmic rank test, and Cox proportional regression test were used for statistical analysis. RESULTS: Among a total of 135,769 subjects in the NHIS database, 48,495 patients with NSD (NSD group) and 54,475 control subjects (control group) were selected. Patients with NSD had an increased risk of anxiety, depression, and migraine compared to the control group. In the NSD group, the adjusted hazard ratios (HR) were 1.236 (95% CI, 1.198-1.276) for anxiety, 1.289 (95% CI, 1.238-1.343) for depression, and 1.251 (95% CI, 1.214-1.290) for migraine. CONCLUSION: NSD is associated with a higher incidence of anxiety, depression, and migraine. Therefore, it is suggested that physicians carefully consider psychoneurological distress and employ therapeutic strategies to minimize these conditions.

Reactions of U+ with H2, D2, and HD Studied by Guided Ion Beam Tandem Mass Spectrometry and Theory.

The kinetic energy-dependent reactions of the atomic actinide uranium cation (U+) with H2, D2, and HD were examined by guided ion beam tandem mass spectrometry. An average 0 K bond dissociation energy of D0(U+ - H) = 2.48 ± 0.06 eV is obtained by analysis of the endothermic product ion cross sections. Quantum chemistry calculations were performed for comparison with experimental thermochemistry, including high-level CASSCF-CASPT2-RASSI calculations of the spin-orbit corrections. CCSD(T) and the CASSCF levels show excellent agreement with experiment, whereas B3LYP and PBE0 slightly overestimate and the M06 approach badly underestimates the bond energy for UH+. Theory was also used to investigate the electronic structures of the reaction intermediates and potential energy surfaces. The experimental product branching ratio for the reaction of U+ with HD indicates that these reactions occur primarily via a direct reaction mechanism, despite the presence of a deep-well for UH2+ formation according to theory. The reactivity and hydride bond energy for U+ are compared with those for transition metal, lanthanide, and actinide cations, and periodic trends are discussed. These comparisons suggest that the 5f electrons on uranium are largely core and uninvolved in the reactive chemistry.