A hydrogen radical pathway for efficacious electrochemical nitrate reduction to ammonia over an Fe-polyoxometalate/Cu electrocatalyst.

Electrochemical nitrate (NO3-) reduction to ammonia (NH3), which is a high value-added chemical or high-energy density carrier in many applications, could become a key process overcoming the disadvantages of the Haber-Bosch process; however, current electrocatalysts have severe drawbacks in terms of activity, selectivity, and stability. Here, we report the hydrogen radical (H*) pathway as a solution to overcome this challenge, as demonstrated by efficacious electrochemical NO3- reduction to NH3 over the Fe-polyoxometalate (Fe-POM)/Cu hybrid electrocatalyst. Fe-POM, composed of Preyssler anions ([NaP5W30O110]14-) and Fe cations, facilitates efficient H* generation via H2O + e- → H* + OH-, and H* transfer to the Cu sites of the Fe-POM/Cu catalyst enables selective NO3- reduction to NH3. Operando spectroelectrochemical spectra substantiate the occurrence of the H* pathway through direct observation of Fe redox related to H* generation and Cu redox related to NO3- binding. With the H* pathway, the Fe-POM/Cu electrodes exhibit high activity for NO3- reduction to NH3 with 1.44 mg cm-2 h-1 in a 500 ppm NO3-/1 M KOH solution at -0.2 V vs. RHE, which is about 36-fold higher than that of the pristine Cu electrocatalyst. Additionally, it attains high selectivity with a faradaic efficiency of up to 97.09% at -0.2 V vs. RHE while exhibiting high catalytic stability over cycles.

3D nitrogen-doped carbon frameworks with hierarchical pores and graphitic carbon channels for high-performance hybrid energy storages.

In principle, hybrid energy storages can utilize the advantages of capacitor-type cathodes and battery-type anodes, but their cathode and anode materials still cannot realize a high energy density, fast rechargeable capability, and long-cycle stability. Herein, we report a strategy to synthesize cathode and anode materials as a solution to overcome this challenge. Firstly, 3D nitrogen-doped hierarchical porous graphitic carbon (NHPGC) frameworks were synthesized as cathode materials using Co-Zn mixed metal-organic frameworks (MOFs). A high capacity is achieved due to the abundant nitrogen and micropores produced by the MOF nanocages and evaporation of Zn. Also, fast ion/electron transport channels were derived through the Co-catalyzed hierarchical porosity control and graphitization. Moreover, tin oxide precursors were introduced in NHPGC to form the SnO2@NHPGC anode. Operando X-ray diffraction revealed that the rescaled subnanoparticles as anodic units facilitated the high capacity during ion insertion-induced rescaling. Besides, the Sn-N bonds endowed the anode with a cycling stability. Furthermore, the NHPGC cathode and SnO2@NHPGC achieved an ultrahigh energy density (up to 244.5 W h kg-1 for Li and 146.1 W h kg-1 for Na), fast rechargeable capability (up to 93C-rate for Li and 147C-rate for Na) as exhibited by photovoltaic recharge within a minute and a long-cycle stability with ∼100% coulombic efficiency over 10 000 cycles.

Intrabasal Plane Defect Formation in NiFe Layered Double Hydroxides Enabling Efficient Electrochemical Water Oxidation.

Defect engineering has proven to be one of the most effective approaches for the design of high-performance electrocatalysts. Current methods to create defects typically follow a top-down strategy, cutting down the pristine materials into fragmented pieces with surface defects yet also heavily destroying the framework of materials that imposes restrictions on the further improvements in catalytic activity. Herein, we describe a bottom-up strategy to prepare free-standing NiFe layered double hydroxide (LDH) nanoplatelets with abundant internal defects by controlling their growth behavior in acidic conditions. Our best-performing nanoplatelets exhibited the lowest overpotential of 241 mV and the lowest Tafel slope of 43 mV/dec for the oxygen evolution reaction (OER) process, superior to the pristine LDHs and other reference cation-defective LDHs obtained by traditional etching methods. Using both material characterization and density functional theory (DFT) simulation has enabled us to develop relationships between the structure and electrochemical properties of these catalysts, suggesting that the enhanced electrocatalytic activity of nanoplatelets mainly results from their defect-abundant structure and stable layered framework with enhanced exposure of the (001) surface.

Coiled Conformation Hollow Carbon Nanosphere Cathode and Anode for High Energy Density and Ultrafast Chargeable Hybrid Energy Storage.

Lithium-ion batteries and pseudocapacitors are nowadays popular electrochemical energy storage for many applications, but their cathodes and anodes are still limited to accommodate rich redox ions not only for high energy density but also sluggish ion diffusivity and poor electron conductivity, hindering fast recharge. Here, we report a strategy to realize high-capacity/high-rate cathode and anode as a solution to this challenge. Multiporous conductive hollow carbon (HC) nanospheres with microporous shells for high capacity and hollow cores/mesoporous shells for rapid ion transfer are synthesized as cathode materials using quinoid:benzenoid (Q:B) unit resins of coiled conformation, leading to ∼5-fold higher capacities than benzenoid:benzenoid resins of linear conformation. Also, Ge-embedded Q:B HC nanospheres are derived as anode materials. The atomic configuration and energy storage mechanism elucidate the existence of mononuclear GeOx units giving ∼7-fold higher ion diffusivity than bulk Ge while suppressing volume changes during long ion-insertion/desertion cycles. Moreover, hybrid energy storage with a Q:B HC cathode and Ge-Q:B HC anode exploit the advantages of capacitor-type cathode and battery-type anode electrodes, as exhibited by battery-compatible high energy density (up to 285 Wh kg-1) and capacitor-compatible ultrafast rechargeable power density (up to 22 600 W kg-1), affording recharge within a minute.

Metal-Organic Fragments with Adhesive Excipient and Their Utilization to Stabilize Multimetallic Electrocatalysts for High Activity and Robust Durability in Oxygen Evolution Reaction.

Multimetallic electrocatalysts have shown great potential to improve electrocatalytic performance, but their deteriorations in activity and durability are yet to be overcome. Here, metal-organic fragments with adhesive excipient to realize high activity with good durability in oxygen evolution reaction (OER) are developed. First, a leaf-like zeolitic-imidazolate framework (ZIF-L) is synthesized. Then, ionized species in hydrogen plasma attack preferentially the organic linkers of ZIF-L to derive cobalt-imidazole fragments (CIFs) as adhesive excipient, while they are designed to retain the coordinated cobalt nodes. Moreover, the vacant coordination sites at cobalt nodes and the unbound nitrogen at organic linkers induce high porosity and conductivity. The CIFs serve to stably impregnate trimetallic FeNiMo electrocatalysts (CIF:FeNiMo), and CIF:FeNiMo containing Fe contents of 22% and hexavalent Mo contents show to enable high activity with low overpotentials (203 mV at 10 mA cm-2 and 238 mV at 100 mA cm-2 ) in OER. The near O K-edge extended X-ray absorption fine structure proves further that high activity for OER originates from the partially filled eg orbitals. Additionally, CIF:FeNiMo exhibit good durability, as demonstrated by high activity retention during at least 45 days in OER.

Autogenous Production and Stabilization of Highly Loaded Sub-Nanometric Particles within Multishell Hollow Metal-Organic Frameworks and Their Utilization for High Performance in Li-O2 Batteries.

Sub-nanometric particles (SNPs) of atomic cluster sizes have shown great promise in many fields such as full atom-to-atom utilization, but their precise production and stabilization at high mass loadings remain a great challenge. As a solution to overcome this challenge, a strategy allowing synthesis and preservation of SNPs at high mass loadings within multishell hollow metal-organic frameworks (MOFs) is demonstrated. First, alternating water-decomposable and water-stable MOFs are stacked in succession to build multilayer MOFs. Next, using controlled hydrogen bonding affinity, isolated water molecules are selectively sieved through the hydrophobic nanocages of water-stable MOFs and transferred one by one to water-decomposable MOFs. The transmission of water molecules via controlled hydrogen bonding affinity through the water-stable MOF layers is a key step to realize SNPs from various types of alternating water-decomposable and water-stable layers. This process transforms multilayer MOFs into SNP-embedded multishell hollow MOFs. Additionally, the multishell stabilizes SNPs by π-backbonding allowing high conductivity to be achieved via the hopping mechanism, and hollow interspaces minimize transport resistance. These features, as demonstrated using SNP-embedded multishell hollow MOFs with up to five shells, lead to high electrochemical performances including high volumetric capacities and low overpotentials in Li-O2 batteries.

Cobalt-Phosphate Catalysts with Reduced Bivalent Co-Ion States and Doped Nitrogen Atoms Playing as Active Sites for Facile Adsorption, Fast Charge Transfer, and Robust Stability in Photoelectrochemical Water Oxidation.

A cobalt-phosphate (Co-Pi) catalyst having octahedral CoO6 molecular units as reaction sites is a key component in photoelectrochemical (PEC) water oxidation systems, but its limited adsorption sites for oxygen-evolving intermediates (*OH, *OOH), slow charge transfer rates, and fast degradation of reaction sites are yet to be overcome. Here, we report that Co-Pi nanoparticles with low-coordinate Co ions and doped nitrogen atoms could be decorated on hematite nanorod arrays to form N-CoPi/hematite composites. Moreover, the local atomic configuration and bond distance studies show that trivalent Co3+ states are partially reduced through nitrogen radicals in the plasma to low-coordinate bivalent Co2+ states playing as the facile adsorption sites of oxygen-evolving intermediates due to the decreased activation barrier for water oxidation. Electron transport is also reinforced by nitrogen species due to the formation of hybridizing N 2p orbitals that give the acceptor levels in the bandgap. As a result, both the incident photon-to-electron conversion efficiency and the charge transfer resistance on N-CoPi/hematite outperform those on a bare hematite by about 3 fold. Furthermore, N-CoPi/hematite gives high activity retention over 90% after the long operation of water oxidation, in support of the reaction sites on N-CoPi not degrading during the successive water oxidation.

Ultrafine Metallic Nickel Domains and Reduced Molybdenum States Improve Oxygen Evolution Reaction of NiFeMo Electrocatalysts.

An electrocatalyst for oxygen evolution reaction (OER) is essential in the realization of renewable energy conversion technologies, but its large overpotential, slow charge transfer, and degradation of surface reaction sites are yet to be overcome. Here, it is found that the metallic nickel domains and high-valence reduced molybdenum ions of NiFeMo electrocatalysts grown on a 3D conductive and porous electrode without using binders enable ultrahigh performance in OER. High resolution-transmission electron microscope and extended X-ray absorption fine structure analyses show that metallic nickel domains with Ni-Ni bonds are generated on the catalyst surface via a dry synthesis using nitrogen plasma. Also, Mo K-edge X-ray absorption near-edge spectroscopy reveals that Mo6+ ions are reduced into high-valence modulating Mo4+ ions. With the metallic nickel domains facilitating the adsorption of oxygen intermediates to low-coordinated Ni0 and the Mo4+ pulling their electrons, the catalyst exhibits about 60-fold higher activity than a Mo-free NiFe catalyst, while giving about threefold faster charge transfer along with longer stability over 100 h and repeated 100 cycles compared to a bare NiFeMo catalyst. Additionally, these metallic domains and high-valence modulating metal ions are exhibited to give high Faradaic efficiency over 95%.

Massilia varians Isolated from a Clinical Specimen.

We report a case of Massilia varians isolated from a deep finger wound following orthopedic surgery on an immunocompetent patient. The bacterium was identified by 16S rDNA sequence analysis. This is the first case of M. varians isolated from a clinical specimen since the first report in 2008.

Identification of Acinetobacter Species Using Matrix-Assisted Laser Desorption Ionization-Time of Flight Mass Spectrometry.

BACKGROUND: Acinetobacter baumannii has a greater clinical impact and exhibits higher antimicrobial resistance rates than the non-baumannii Acinetobacter species. Therefore, the correct identification of Acinetobacter species is clinically important. Matrix-assisted laser desorption ionization-time of flight (MALDI-TOF) mass spectrometry (MS) has recently become the method of choice for identifying bacterial species. The purpose of this study was to evaluate the ability of MALDI-TOF MS (Bruker Daltonics GmbH, Germany) in combination with an improved database to identify various Acinetobacter species. METHODS: A total of 729 Acinetobacter clinical isolates were investigated, including 447 A. baumannii, 146 A. nosocomialis, 78 A. pittii, 18 A. ursingii, 9 A. bereziniae, 9 A. soli, 4 A. johnsonii, 4 A. radioresistens, 3 A. gyllenbergii, 3 A. haemolyticus, 2 A. lwoffii, 2 A. junii, 2 A. venetianus, and 2 A. genomospecies 14TU. After 212 isolates were tested with the default Bruker database, the profiles of 63 additional Acinetobacter strains were added to the default database, and 517 isolates from 32 hospitals were assayed for validation. All strains in this study were confirmed by rpoB sequencing. RESULTS: The addition of the 63 Acinetobacter strains' profiles to the default Bruker database increased the overall concordance rate between MALDI-TOF MS and rpoB sequencing from 69.8% (148/212) to 100.0% (517/517). Moreover, after library modification, all previously mismatched 64 Acinetobacter strains were correctly identified. CONCLUSIONS: MALDI-TOF MS enables the prompt and accurate identification of clinically significant Acinetobacter species when used with the improved database.