Controlled Crystallinity of a Sn-Doped α-Ga2O3 Epilayer Using Rapidly Annealed Double Buffer Layers.

Double buffer layers composed of (AlxGa1-x)2O3/Ga2O3 structures were employed to grow a Sn-doped α-Ga2O3 epitaxial thin film on a sapphire substrate using mist chemical vapor deposition. The insertion of double buffer layers improved the crystal quality of the upper-grown Sn-doped α-Ga2O3 thin films by blocking dislocation generated by the substrates. Rapid thermal annealing was conducted for the double buffer layers at phase transition temperatures of 700-800 °C. The slight mixing of κ and ß phases further improved the crystallinity of the grown Sn-Ga2O3 thin film through local lateral overgrowth. The electron mobility of the Sn-Ga2O3 thin films was also significantly improved due to the smoothened interface and the diffusion of Al. Therefore, rapid thermal annealing with the double buffer layer proved advantageous in achieving strong electrical properties for Ga2O3 semiconductor devices within a shorter processing time.

A concept to detect a subgingival finish line using an intraoral optical coherence tomography system: A clinical report.

This clinical report introduces an approach for detecting the supragingival finish line by penetrating the teeth and gingival tissue using optical coherence tomography (OCT) technology. This approach was used in 3 patients who underwent tooth preparation with a subgingival finish line. Consequently, the subgingival finish line, typically challenging to discern clearly in intraoral scans, was identifiable in the OCT image.

Normal mode analysis in multi-coupled non-Hermitian optical nanocavities.

Coupled optical cavities are an attractive on-chip optical platform for realizing quantum mechanical concepts in electrodynamics and further developing non-Hermitian photonics. In such systems, an intercavity interaction is often considered as a key parameter to understand the system's behaviors but its estimation/calculation is typically limited for some simplified systems owing to extended complexities. For example, multi-coupled photonic crystal (PhC) nanocavities exhibiting strong resonances with a large free spectral range can serve as an excellent test-bed to study non-Hermitian optical properties when spatially non-uniform gain is introduced. However, the detailed quantitative analysis such as spectral tracing of cavity normal modes is often limited in commercially available numerical tools because of the required massive computation resources. Herein, we report on a concept of spatial overlap integrals (SOIs) between the eigenmodes in non-coupled PhC nanocavities and utilize them to obtain the intercavity interactions in passively coupled PhC nanocavity systems. With the help of coupling strength factors calculated from SOIs, we were able to fully exploit the coupled mode theory (CMT) and readily trace the detailed spectral behaviors of normal modes in various multi-coupled PhC nanocavities. Full-wave numerical simulation results verified the proposed method, revealing that the characteristics of original eigenmodes from non-coupled PhC nanocavities can act as key building blocks for analyzing the normal modes of multi-coupled PhC nanocavities. We further applied this SOI method to various multi-coupled PhC nanocavities with non-symmetric optical gain/loss distributions and successfully observed the unusual spectral evolution of normal modes and the correspondingly occurring unique non-Hermitian behaviors.

Broadband generation of quasi bound-state-in-continuum modes using subwavelength truncated cone resonators.

To allow a high quality factor (Q-factor) to a sub-wavelength dielectric resonator, quasi-bound states in the continuum (Q-BICs) have gained much interest. However, the Q-BIC resonance condition is too sensitive to the geometry of the resonator, and its practical broadband generation on a single-wafer platform has been limited. Here we present that, employing the base angle as a structural degree of freedom, the truncated nano-cone resonator supports the Q-BIC resonance with a high Q-factor of >150 over a wide wavelength range of >100 nm. We expect our approach will boost the utilization of the Q-BIC resonance for various applications requiring broadband spectral tuning.

Optical Nonlinearity in Silicon Nanowires Enabled by Bound States in the Continuum.

Intense electromagnetic fields localized within resonant photonic nanostructures provide versatile opportunities for engineering nonlinear optical effects on a subwavelength scale. For dielectric structures, optical bound states in the continuum (BICs, resonant nonradiative modes that exist within the radiation continuum) are an emerging strategy to localize and intensify fields. Here, we report efficient second and third harmonic generation from Si nanowires (NWs) encoded with BIC and quasi-BIC resonances. In situ dopant modulation during vapor-liquid-solid NW growth was followed by wet-chemical etching to periodically modulate the diameter of the Si NWs and create cylindrically symmetric geometric superlattices (GSLs) with precisely defined axial and radial dimensions. By variation of the GSL structure, BIC and quasi-BIC resonant conditions were created to span visible and near-infrared optical frequencies. To probe the optical nonlinearity of these structures, we collected linear extinction spectra and nonlinear spectra from single-NW GSLs, demonstrating that quasi-BIC spectral positions at the fundamental frequency are directly correlated with enhanced harmonic generation at second and third harmonic frequencies. Interestingly, we find that deliberate geometric detuning from the BIC condition leads to a quasi-BIC resonance with maximal harmonic generation efficiency by providing a balance between the capacity to trap light and the capacity to couple to the external radiation continuum. Moreover, under focused illumination, as few as 30 geometric unit cells are required to achieve more than 90% of the approximate maximum theoretical efficiency of an infinite structure, indicating that nanostructures with projected areas smaller than ∼10 µm2 can support quasi-BICs for efficient harmonic generation. The results represent an important step toward the design of efficient harmonic generation at the nanoscale and further highlight the photonic utility of BICs at optical frequencies in ultracompact one-dimensional nanostructures.

Nanograin network memory with reconfigurable percolation paths for synaptic interactions.

The development of memory devices with functions that simultaneously process and store data is required for efficient computation. To achieve this, artificial synaptic devices have been proposed because they can construct hybrid networks with biological neurons and perform neuromorphic computation. However, irreversible aging of these electrical devices causes unavoidable performance degradation. Although several photonic approaches to controlling currents have been suggested, suppression of current levels and switching of analog conductance in a simple photonic manner remain challenging. Here, we demonstrated a nanograin network memory using reconfigurable percolation paths in a single Si nanowire with solid core/porous shell and pure solid core segments. The electrical and photonic control of current percolation paths enabled the analog and reversible adjustment of the persistent current level, exhibiting memory behavior and current suppression in this single nanowire device. In addition, the synaptic behaviors of memory and erasure were demonstrated through potentiation and habituation processes. Photonic habituation was achieved using laser illumination on the porous nanowire shell, with a linear decrease in the postsynaptic current. Furthermore, synaptic elimination was emulated using two adjacent devices interconnected on a single nanowire. Therefore, electrical and photonic reconfiguration of the conductive paths in Si nanograin networks will pave the way for next-generation nanodevice technologies.

A supervised machine learning approach to discriminate the effect of carcass leachate on shallow groundwater quality around on-farm livestock mortality burial sites.

The evaluation of leachate leakage at livestock mortality burial sites is challenging, particularly when groundwater is previously contaminated by agro-livestock farming. Supervised machine learning was applied to discriminate the impacts of carcass leachate from pervasive groundwater contamination in the following order: data labeling, feature selection, synthetic data generation, and classification. Physicochemical data of 359 water samples were collected from burial pits (LC), monitoring wells near pits (MW), pre-existing shallow household wells (HW), and background wells with pervasive contamination (BG). A linear classification model was built using two representative groups (LC and BG) affected by different pollution sources as labeled data. A classifier was then applied to assess the impact of leachate leakage in MW and HW. As a result, leachate impacts were observed in 40% of MW samples, which indicates improper construction and management of some burial pits. Leachate impacts were also detected in six HW samples, up to 120 m downgradient, within one year. The quantitative decision-making tool to diagnose groundwater contamination with leachate leakage can contribute to ensuring timely responses to leakage. The proposed machine learning approach can also be used to improve the environmental impact assessment of water pollution by improper disposal of organic waste.

Dental diagnosis for inlay restoration using an intraoral optical coherence tomography system: A case report.

PATIENTS: The patient was a 32-year-old man who underwent amalgam restoration of the mandibular right second molar. An amalgam restoration fracture was diagnosed by intraoral optical coherence tomography (OCT), and pulp exposure was examined during cavity preparation. Subsequently, a definitive ceramic restoration was fabricated, and the marginal fit in the oral cavity was evaluated using the OCT system. DISCUSSION: The existing OCT system cannot acquire images inside the oral cavity because of the large probe size. However, the proposed intraoral OCT system can access the prostheses in the mandibular right second molar. Therefore, dental diagnosis for restoration treatment with dental prosthesis fracture, marginal gap, and pulp exposure after tooth preparation is possible using the proposed intraoral OCT system. CONCLUSIONS: The use of the intraoral OCT system improved dental diagnosis by allowing the dentist to confirm quantitative values through cross-sectional images, rather than that by determining a treatment plan after visual dental diagnosis.

Rasiella rasia gen. nov. sp. nov. within the family Flavobacteriaceae isolated from seawater recirculating aquaculture system.

A novel bacterium designated RR4-40T was isolated from a biofilter of seawater recirculating aquaculture system in Busan, South Korea. Cells are strictly aerobic, Gram-negative, irregular short rod, non-motile, and oxidase- and catalase-negative. Growth was observed at 15-30°C, 0.5-6% NaCl (w/v), and pH 5.0-9.5. The strain grew optimally at 28°C, 3% salinity (w/v), and pH 8.5. The phylogenetic analysis based on 16S rRNA gene sequences showed that strain RR4-40T was most closely related to Marinirhabdus gelatinilytica NH83T (94.16% of 16S rRNA gene similarity) and formed a cluster with genera within the family Flavobacteriaceae. The values of the average nucleotide identity (ANI), digital DNA-DNA hybridization (dDDH), and average amino acid identity (AAI) between genomes of strain RR4-40T and M. gelatinilytica NH83T were 72.91, 18.2, and 76.84%, respectively, and the values against the strains in the other genera were lower than those. The major fatty acids were iso-C15:0 (31.34%), iso-C17:0 3-OH (13.65%), iso-C16:0 3-OH (10.61%), and iso-C15:1 G (10.38%). The polar lipids comprised phosphatidylglycerol, diphosphatidylglycerol, aminophospholipid, aminolipid, glycolipid, and sphingolipid. The major respiratory quinone was menaquinone-6 (MK-6) and the DNA G + C content of strain RR4-40T was 37.4 mol%. According to the polyphasic analysis, strain RR4-40T is considered to represent a novel genus within the family Flavobacteriaceae, for which the name Rasiella rasia gen. nov, sp. nov. is proposed. The type strain is RR4-40T (= KCTC 52650T = MCCC 1K04210T).

Efficient Photon Extraction in Top-Emission Organic Light-Emitting Devices Based on Ampicillin Microstructures.

The desire to enhance the efficiency of organic light-emitting devices (OLEDs) has driven to the investigation of advanced materials with fascinating properties. In this work, the efficiency of top-emission OLEDs (TEOLEDs) is enhanced by introducing ampicillin microstructures (Amp-MSs) with dual phases (α-/ß-phase) that induce photoluminescence (PL) and electroluminescence (EL). Moreover, Amp-MSs can adjust the charge balance by Fermi level (EF ) alignment, thereby decreasing the leakage current. The decrease in the wave-guided modes can enhance the light outcoupling through optical scattering. The resulting TEOLED demonstrates a record-high external quantum efficiency (EQE) (maximum: 68.7% and average: 63.4% at spectroradiometer; maximum: 44.8% and average: 42.6% at integrating sphere) with a wider color gamut (118%) owing to the redshift of the spectrum by J-aggregation. Deconvolution of the EL intensities is performed to clarify the contribution of Amp-MSs to the device EQE enhancement (optical scattering by Amp-MSs: 17.0%, PL by radiative energy transfer: 9.1%, and EL by J-aggregated excitons: 4.6%). The proposed TEOLED outperforms the existing frameworks in terms of device efficiency.

Scalable Three-Dimensional Recording Electrodes for Probing Biological Tissues.

Electrophysiological recording technologies can provide critical insight into the function of the nervous system and other biological tissues. Standard silicon-based probes have limitations, including single-sided recording sites and intrinsic instabilities due to the probe stiffness. Here, we demonstrate high-performance neural recording using double-sided three-dimensional (3D) electrodes integrated in an ultraflexible bioinspired open mesh structure, allowing electrodes to sample fully the 3D interconnected tissue of the brain. In vivo electrophysiological recording using 3D electrodes shows statistically significant increases in the number of neurons per electrode, average spike amplitudes, and signal to noise ratios in comparison to standard two-dimensional electrodes, while achieving stable detection of single-neuron activity over months. The capability of these 3D electrodes is further shown for chronic recording from retinal ganglion cells in mice. This approach opens new opportunities for a comprehensive 3D interrogation, stimulation, and understanding of the complex circuitry of the brain and other electrogenic tissues in live animals over extended time periods.

Organic Anisotropic Excitonic Optical Nanoantennas.

Optical nanoantennas provide control of light at the nanoscale, which makes them important for diverse areas ranging from photocatalysis and flat metaoptics to sensors and biomolecular tweezing. They have traditionally been limited to metallic and dielectric nanostructures that sustain plasmonic and Mie resonances, respectively. More recently, nanostructures of organic J-aggregate excitonic materials have been proposed capable of also supporting nanooptical resonances, although their advance has been hampered from difficulty in nanostructuring. Here, the authors present the realization of organic J-aggregate excitonic nanostructures, using nanocylinder arrays as model system. Extinction spectra show that they can sustain both plasmon-like resonances and dielectric resonances, owing to the material providing negative and large positive permittivity regions at the different sides of its exciton resonance. Furthermore, it is found that the material is highly anisotropic, leading to hyperbolic and elliptic permittivity regions. Nearfield analysis using optical simulation reveals that the nanostructures therefore support hyperbolic localized surface exciton resonances and elliptic Mie resonances, neither of which has been previously demonstrated for this type of material. The anisotropic nanostructures form a new type of optical nanoantennas, which combined with the presented fabrication process opens up for applications such as fully organic excitonic metasurfaces.

Microinstability characterised by small and easily overlooked anterior labral or Hill-Sachs lesions can be managed with arthroscopic anterior labral repair.

PURPOSE: Some young individuals present with shoulder pain without a definite history or complaint of instability. However, careful history taking, physical examination, and high-quality magnetic resonance imaging may reveal evidence of instability of which the patient is unaware. Therefore, a clearer definition of these ambiguous patients is needed. This study aimed to report the characteristics and surgical outcomes of patients with microinstability compared to those of patients with classic recurrent anterior shoulder instability. METHODS: From 2005 to 2018, 35 patients with microinstability (group M) underwent arthroscopic anterior labral repair (AALR) and were compared to 35 sex- and age-matched patients with classic recurrent anterior shoulder instability (group C) who also underwent AALR. Baseline characteristics, preoperative apprehension test findings, preoperative imaging for the presence of anterior labral and Hill-Sachs lesions, preoperative and postoperative (over 2 years) range of motion (ROM) and functional scores, final complications, and patient satisfaction were analysed. RESULTS: The most common chief complaints in groups M and C were pain (29/35) and both pain and instability (27/35), respectively. Only pain during the apprehension test was predominant in group M (M vs. C, 27 vs. 1, p < 0.001). High incidence of chronic repetitive injuries (26/35) and acute trauma (28/35) were observed in groups M and C, respectively. Over half of the patients in group M showed anterior labral lesions on magnetic resonance arthrography (MRA, 18/35), and 21 patients had Hill-Sachs lesions on MRA/three-dimensional computed tomography. Finally, 29 patients showed either anterior labral or Hill-Sachs lesions on preoperative imaging. The lesion severity was higher in group C than that in group M. All patients underwent AALR with/without the remplissage procedure, with no significant differences in final clinical outcomes, complications, and patient satisfaction between the groups. CONCLUSIONS: Microinstability is diagnostically challenging and can be diagnosed in young patients with ambiguous shoulder pain during motion, without instability. Pain on anterior apprehension test and subtle labral and/or Hill-Sachs lesion on imaging study could be diagnostic clues. This condition can be managed with arthroscopic anterior labral repair with or without the remplissage procedure. The possibility of microinstability in young patients with shoulder pain should always be considered, and small anterior labral or Hill-Sachs lesions should be closely monitored. LEVEL OF EVIDENCE: III.

Improved device efficiency and lifetime of perovskite light-emitting diodes by size-controlled polyvinylpyrrolidone-capped gold nanoparticles with dipole formation.

Herein, an unprecedented report is presented on the incorporation of size-dependent gold nanoparticles (AuNPs) with polyvinylpyrrolidone (PVP) capping into a conventional hole transport layer, poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS). The hole transport layer blocks ion-diffusion/migration in methylammonium-lead-bromide (MAPbBr3)-based perovskite light-emitting diodes (PeLEDs) as a modified interlayer. The PVP-capped 90 nm AuNP device exhibited a seven-fold increase in efficiency (1.5%) as compared to the device without AuNPs (0.22%), where the device lifetime was also improved by 17-fold. This advancement is ascribed to the far-field scattering of AuNPs, modified work function and carrier trapping/detrapping. The improvement in device lifetime is attributed to PVP-capping of AuNPs which prevents indium diffusion into the perovskite layer and surface ion migration into PEDOT:PSS through the formation of induced electric dipole. The results also indicate that using large AuNPs (> 90 nm) reduces exciton recombination because of the trapping of excess charge carriers due to the large surface area.

Microstructural Gradational Properties of Sn-Doped Gallium Oxide Heteroepitaxial Layers Grown Using Mist Chemical Vapor Deposition.

This study examined the microstructural gradation in Sn-doped, n-type Ga2O3 epitaxial layers grown on a two-inch sapphire substrate using horizontal hot-wall mist chemical vapor deposition (mist CVD). The results revealed that, compared to a single Ga2O3 layer grown using a conventional single-step growth, the double Ga2O3 layers grown using a two-step growth process exhibited excellent thickness uniformity, surface roughness, and crystal quality. In addition, the spatial gradient of carrier concentration in the upper layer of the double layers was significantly affected by the mist flow velocity at the surface, regardless of the dopant concentration distribution of the underlying layer. Furthermore, the electrical properties of the single Ga2O3 layer could be attributed to various scattering mechanisms, whereas the carrier mobility of the double Ga2O3 layers could be attributed to Coulomb scattering owing to the heavily doped condition. It strongly suggests the two-step-grown, lightly-Sn-doped Ga2O3 layer is feasible for high power electronic devices.

Unveiling the role of micropores in porous carbon for Li-S batteries using operando SAXS.

The movement of the sulfur species of a lithium-sulfur battery cathode was directly observed through pioneering operando SAXS analysis. Micropore is a prior repository for sulfur before and after the electrochemical reaction. Mesopore is actual reaction site for sulfur species. The separate properties of the pores were established, adding critical insight to advanced carbon cathode material design.

Ultralow-threshold laser using super-bound states in the continuum.

Wavelength-scale lasers provide promising applications through low power consumption requiring for optical cavities with increased quality factors. Cavity radiative losses can be suppressed strongly in the regime of optical bound states in the continuum; however, a finite size of the resonator limits the performance of bound states in the continuum as cavity modes for active nanophotonic devices. Here, we employ the concept of a supercavity mode created by merging symmetry-protected and accidental bound states in the continuum in the momentum space, and realize an efficient laser based on a finite-size cavity with a small footprint. We trace the evolution of lasing properties before and after the merging point by varying the lattice spacing, and we reveal this laser demonstrates the significantly reduced threshold, substantially increased quality factor, and shrunken far-field images. Our results provide a route for nanolasers with reduced out-of-plane losses in finite-size active nanodevices and improved lasing characteristics.

Highly efficient, heat dissipating, stretchable organic light-emitting diodes based on a MoO3/Au/MoO3 electrode with encapsulation.

Stretchable organic light-emitting diodes are ubiquitous in the rapidly developing wearable display technology. However, low efficiency and poor mechanical stability inhibit their commercial applications owing to the restrictions generated by strain. Here, we demonstrate the exceptional performance of a transparent (molybdenum-trioxide/gold/molybdenum-trioxide) electrode for buckled, twistable, and geometrically stretchable organic light-emitting diodes under 2-dimensional random area strain with invariant color coordinates. The devices are fabricated on a thin optical-adhesive/elastomer with a small mechanical bending strain and water-proofed by optical-adhesive encapsulation in a sandwiched structure. The heat dissipation mechanism of the thin optical-adhesive substrate, thin elastomer-based devices or silicon dioxide nanoparticles reduces triplet-triplet annihilation, providing consistent performance at high exciton density, compared with thick elastomer and a glass substrate. The performance is enhanced by the nanoparticles in the optical-adhesive for light out-coupling and improved heat dissipation. A high current efficiency of ~82.4 cd/A and an external quantum efficiency of ~22.3% are achieved with minimum efficiency roll-off.