Updated Reference Intervals for Alanine Aminotransferase in a Metabolically and Histologically Normal Population.

BACKGROUND AND AIMS: This study aims to reevaluate upper reference limit (URL) for alanine aminotransferase (ALT) by considering the changing epidemiology of major liver diseases. We employed histological and metabolic parameters in Asian living liver donors. METHODS: We performed a retrospective analysis of 5,455 potential living liver donors from 2005 to 2019. Participants were screened for hepatitis B, C, HIV, and alcohol use. Histologically and metabolically healthy participants were assessed using the Prati criteria (body mass index <23 kg/m2, triglyceride ≤200 mg/dL, fasting glucose ≤105 mg/dL, total cholesterol ≤220 mg/dL). The updated ALT-URL was determined as the 95th percentile among participants without hepatic steatosis and who met the Prati criteria. RESULTS: The median age was 30 years, with a male predominance (66.2%). Among 5,455 participants, 3,162 (58.0%) showed no hepatic steatosis, with 1,553 (49.1%) meeting both the criteria for no steatosis and the Prati criteria for metabolic health. The updated URL for ALT in these participants was 34 U/L for males and 22 U/L for females, which was significantly lower than conventionally accepted values. Using this revised ALT-URL, 72.8% of males with ALT levels ≥34 U/L and 55.0% of females with ALT levels ≥22 U/L showed signs of steatosis, while 32.7% of males and 22.2% of females met the criteria for metabolic syndrome. CONCLUSIONS: Our study provided the newly established reference intervals for ALT levels in a metabolically and histologically verified Asian population. The proposed URL for ALT are 34 U/L and 22 U/L for males and females, respectively.

Impact of Academia-Government Collaboration on Laboratory Medicine Standardization in South Korea: analysis of eight years creatinine proficiency testing experience.

OBJECTIVES: To evaluate the performance of the Academia-Government Collaboration for Laboratory Medicine Standardization in Korea (KR-STDZN) based on data from KR-STDZN proficiency testing (KR-STDZN-PT) for creatinine over eight years (2015-2022). METHODS: We used KR-STDZN-PT data of creatinine tests from 2015 to 2022. Acceptance of the participating institutions' test results was assessed by calculating the acceptance performance as absolute bias (absBias%), total coefficient of variance (tCV%), and total error (TE%) for each sample using six measurements from each institution and true values of each reference material. The test result was considered acceptable when absBias%, tCV%, and TE% were <5.10, <3.20, and <11.40 %, respectively. The proportion of acceptable institutions among all participating institutions in each round was defined as the acceptance rate. Improvements in absBias%, tCV%, and TE% were analyzed using creatinine concentration ranges in samples. RESULTS: The number of participating institutions increased from 2015 to 2017 but remained consistent since 2018. The acceptance rates for absBias% and TE% increased from 52.2 and 77.6 %, in 2015 and to 90.7 and 96.3 %, in 2022, respectively. The acceptance rate for tCV% remained in the 90 % range for eight years. When creatinine <3 mg/dL, mean absBias%, and mean TE% improved significantly in 2021-2022 compared to 2015-2016 (p<0.05). When creatinine >3 mg/dL, acceptance performance did not improve. Mean tCV% remained consistent annually regardless of creatinine concentration. No significant variations in test methods were observed. CONCLUSIONS: The collaboration between academia and the government improved creatinine testing quality. Nevertheless, KR-STDZN must be expanded and refined.

Machine learning-based delta check method for detecting misidentification errors in tumor marker tests.

OBJECTIVES: Misidentification errors in tumor marker tests can lead to serious diagnostic and treatment errors. This study aims to develop a method for detecting these errors using a machine learning (ML)-based delta check approach, overcoming limitations of conventional methods. METHODS: We analyzed five tumor marker test results: alpha-fetoprotein (AFP), cancer antigen 19-9 (CA19-9), cancer antigen 125 (CA125), carcinoembryonic antigen (CEA), and prostate-specific antigen (PSA). A total of 246,261 records were used in the analysis. Of these, 179,929 records were used for model training and 66,332 records for performance evaluation. We developed a misidentification error detection model based on the random forest (RF) and deep neural network (DNN) methods. We performed an in silico simulation with 1 % random sample shuffling. The performance of the developed models was evaluated and compared to conventional delta check methods such as delta percent change (DPC), absolute DPC (absDPC), and reference change values (RCV). RESULTS: The DNN model outperformed the RF, DPC, absDPC, and RCV methods in detecting sample misidentification errors. It achieved balanced accuracies of 0.828, 0.842, 0.792, 0.818, and 0.833 for AFP, CA19-9, CA125, CEA, and PSA, respectively. Although the RF method performed better than DPC and absDPC, it showed similar or lower performance compared to RCV. CONCLUSIONS: Our research results demonstrate that an ML-based delta check method can more effectively detect sample misidentification errors compared to conventional delta check methods. In particular, the DNN model demonstrated superior and stable detection performance compared to the RF, DPC, absDPC, and RCV methods.

Interpreting changes in consecutive laboratory results: clinician's perspectives on clinically significant change.

BACKGROUND: Clinical laboratory tests are inevitably affected by various factors. Therefore, when comparing consecutive test results, it is crucial to consider the inherent uncertainty of the test. Clinical laboratories use reference change value (RCV) to determine a significant change between 2 results. Whereas the criteria for the interpretation of consecutive results by clinicians are not well known. We investigated the clinician's interpretation of a clinically significant change in consecutive laboratory test results and compared them to RCV. METHODS: We performed a questionnaire survey on clinicians, which comprised 2 scenarios with 22 laboratory test items suggesting initial test results. Clinicians were asked to choose a result showing clinically significant change. RCV of the analytes from EFLM database were collected. RESULTS: We received 290 valid questionnaire responses. Clinicians' opinions on clinically significant change was inconsistent between clinicians and scenarios, and was generally larger than RCV. Clinicians commented that they were not familiar with the variability of the laboratory tests. CONCLUSIONS: Clinicians' opinions on clinically significant changes were more prominent than RCV. Meanwhile, they tended to neglect the analytical and biological variation. Laboratories should properly guide clinicians on the RCV of tests for better decision-making on patients' clinical states.

A New Strategy for Evaluating the Quality of Laboratory Results for Big Data Research: Using External Quality Assessment Survey Data (2010-2020).

Background: To ensure valid results of big data research in the medical field, the input laboratory results need to be of high quality. We aimed to establish a strategy for evaluating the quality of laboratory results suitable for big data research. Methods: We used Korean Association of External Quality Assessment Service (KEQAS) data to retrospectively review multicenter data. Seven measurands were analyzed using commutable materials: HbA1c, creatinine (Cr), total cholesterol (TC), triglyceride (TG), alpha-fetoprotein (AFP), prostate-specific antigen (PSA), and cardiac troponin I (cTnI). These were classified into three groups based on their standardization or harmonization status. HbA1c, Cr, TC, TG, and AFP were analyzed with respect to peer group values. PSA and cTnI were analyzed in separate peer groups according to the calibrator type and manufacturer, respectively. The acceptance rate and absolute percentage bias at the medical decision level were calculated based on biological variation criteria. Results: The acceptance rate (22.5%-100%) varied greatly among the test items, and the mean percentage biases were 0.6%-5.6%, 1.0%-9.6%, and 1.6%-11.3% for all items that satisfied optimum, desirable, and minimum criteria, respectively. Conclusions: The acceptance rate of participants and their external quality assessment (EQA) results exhibited statistically significant differences according to the quality grade for each criterion. Even when they passed the EQA standards, the test results did not guarantee the quality requirements for big data. We suggest that the KEQAS classification can serve as a guide for building big data.

Status of Pre-analytical Quality Management of Laboratory Tests at Primary Clinics in Korea.

Background: The quality of laboratory test results is crucial for accurate clinical diagnosis and treatment. Pre-analytical errors account for approximately 60%-70% of all laboratory test errors. Laboratory test results may be largely impacted by pre-analytical phase management. However, primary care clinics currently do not have pre-analytical quality management audit systems. We aimed to understand the current status of pre-analytical quality management in laboratory medicine in Korean primary care clinics. Methods: Questionnaires were designed to focus on essential components of the pre-analytical process of primary care clinics. An online survey platform was used to administer the survey to internal medicine or family medicine physicians in primary care clinics. Results: A total of 141 physicians provided a complete response to the questionnaire. In 65.2% of the clinics, patient information was hand-labeled rather than barcoded on the specimen bottles; 14.2% of clinics displayed only one piece of patient information (name or identification number), and 19.9% of clinics displayed two pieces of information. Centrifuges were not available in 29.1% of the clinics. Institutions carrying out the National Health Screening Program (NHSP) used more barcode system and had more centrifuges than institutions that did not carrying out the NHSP. Conclusions: Pre-analytical quality management is inadequate in many primary clinics. We suggest implementation of a mandatory management system, allowing for a pre-analytical quality management to be carried out in primary care clinics.

Clinical and Microbiological Characteristics of Chryseobacterium indologenes Bacteremia: A 20-Year Experience in a Single University Hospital.

BACKGROUND: Chryseobacterium indologenes is ubiquitous in nature and rarely causes infections. However, the clinical impact of C. indologenes has increased in recent years, especially in immunocompromised patients, and has resulted in high mortality rates. We aimed to investigate the clinical and microbiological characteristics of C. indologenes bacteremia. MATERIALS AND METHODS: We retrospectively reviewed medical records of a 642-bed university-affiliated hospital in Korea, dating from January 2001 to December 2020, to investigate C. indologenes bacteremia. RESULTS: A total of 22 C. indologenes isolates were identified from blood culture records. All patients were hospitalized at the time of bacteremia, and the most common manifestation was primary bacteremia. A sizable majority of the patients (83.3%) had underlying diseases, and all patients received intensive care unit care during their admission. The 14-day and 28-day mortality rates were 8.3% and 16.7%, respectively. Importantly, all C. indologenes isolates were 100% susceptible to trimethoprim-sulfamethoxazole. CONCLUSION: In our study, most of the infections were hospital-acquired, and the susceptibility pattern of the C. indologenes isolates showed multidrug resistance. However, trimethoprim-sulfamethoxazole is a potentially useful antibiotic for C. indologenes bacteremia treatment. More attention is required to identify C. indologenes as one of the most important nosocomial bacteria with detrimental effects in immunocompromised patients.

Practical delta check limits for tumour markers in different clinical settings.

OBJECTIVES: Few studies have reported on delta checks for tumour markers, even though these markers are often evaluated serially. Therefore, this study aimed to establish a practical delta check limit in different clinical settings for five tumour markers: alpha-fetoprotein, cancer antigen 19-9, cancer antigen 125, carcinoembryonic antigen, and prostate-specific antigen. METHODS: Pairs of patients' results (current and previous) for five tumour markers between 2020 and 2021 were retrospectively collected from three university hospitals. The data were classified into three subgroups, namely: health check-up recipient (subgroup H), outpatient (subgroup O), and inpatient (subgroup I) clinics. The check limits of delta percent change (DPC), absolute DPC (absDPC), and reference change value (RCV) for each test were determined using the development set (the first 18 months, n=179,929) and then validated and simulated by applying the validation set (the last 6 months, n=66,332). RESULTS: The check limits of DPC and absDPC for most tests varied significantly among the subgroups. Likewise, the proportions of samples requiring further evaluation, calculated by excluding samples with both current and previous results within the reference intervals, were 0.2-2.9% (lower limit of DPC), 0.2-2.7% (upper limit of DPC), 0.3-5.6% (absDPC), and 0.8-35.3% (RCV99.9%). Furthermore, high negative predictive values >0.99 were observed in all subgroups in the in silico simulation. CONCLUSIONS: Using real-world data, we found that DPC was the most appropriate delta-check method for tumour markers. Moreover, Delta-check limits for tumour markers should be applied based on clinical settings.

A 20-year trend of prevalence and susceptibility to trimethoprim/sulfamethoxazole of Stenotrophomonas maltophilia in a single secondary care hospital in Korea.

Stenotrophomonas maltophilia is a Gram-negative opportunistic pathogen that can cause serious infection. We aimed to analyze the prevalence and susceptibility rates to trimethoprim/sulfamethoxazole of S. maltophilia. We conducted a retrospective study of S. maltophilia isolates from a university hospital from 2001 to 2020. Clinical information, the numbers of isolates and susceptibility rates were analyzed by year. Susceptibility rates and changes in respiratory and non-respiratory samples were compared. 1805 S. maltophilia isolates were identified, of which 81.4% (1469/1805) were from respiratory samples. There was a male predominance and 52% of the isolates were from general wards. The average susceptibility rate was 87.7% and there was no significant annual trend (P = .519). The susceptibility rate was 88.7% in respiratory samples and 84.1% in non-respiratory samples (P = .018). Susceptibility analyses using clinical data over long periods can guide the choice of antimicrobials especially for pathogen whose treatment options are limited.

Quantitative Computed Tomography Parameters in Coronavirus Disease 2019 Patients and Prediction of Respiratory Outcomes Using a Decision Tree.

Background: Chest computed tomography (CT) scans play an important role in the diagnosis of coronavirus disease 2019 (COVID-19). This study aimed to describe the quantitative CT parameters in COVID-19 patients according to disease severity and build decision trees for predicting respiratory outcomes using the quantitative CT parameters. Methods: Patients hospitalized for COVID-19 were classified based on the level of disease severity: (1) no pneumonia or hypoxia, (2) pneumonia without hypoxia, (3) hypoxia without respiratory failure, and (4) respiratory failure. High attenuation area (HAA) was defined as the quantified percentage of imaged lung volume with attenuation values between -600 and -250 Hounsfield units (HU). Decision tree models were built with clinical variables and initial laboratory values (model 1) and including quantitative CT parameters in addition to them (model 2). Results: A total of 387 patients were analyzed. The mean age was 57.8 years, and 50.3% were women. HAA increased as the severity of respiratory outcome increased. HAA showed a moderate correlation with lactate dehydrogenases (LDH) and C-reactive protein (CRP). In the decision tree of model 1, the CRP, fibrinogen, LDH, and gene Ct value were chosen as classifiers whereas LDH, HAA, fibrinogen, vaccination status, and neutrophil (%) were chosen in model 2. For predicting respiratory failure, the decision tree built with quantitative CT parameters showed a greater accuracy than the model without CT parameters. Conclusions: The decision tree could provide higher accuracy for predicting respiratory failure when quantitative CT parameters were considered in addition to clinical characteristics, PCR Ct value, and blood biomarkers.

Comparison between polynomial regression and weighted least squares regression analysis for verification of analytical measurement range.

OBJECTIVES: Recently, the linearity evaluation protocol by the Clinical & Laboratory Standards Institute (CLSI) has been revised from EP6-A to EP6-ED2, with the statistical method of interpreting linearity evaluation data being changed from polynomial regression to weighted least squares linear regression (WLS). We analyzed and compared the analytical measurement range (AMR) verification results according to the present and prior linearity evaluation guidelines. METHODS: The verification of AMR of clinical chemistry tests was performed using five samples with two replicates in three different laboratories. After analyzing the same evaluation data in each laboratory by the polynomial regression analysis and WLS methods, results were compared to determine whether linearity was verified across the five sample concentrations. In addition, whether the 90% confidence interval of deviation from linearity by WLS was included in the allowable deviation from linearity (ADL) was compared. RESULTS: A linearity of 42.3-56.8% of the chemistry items was verified by polynomial regression analysis in three laboratories. For analysis of the same data by WLS, a linearity of 63.5-78.3% of the test items was verified where the deviation from linearity of all five samples was within the ADL criteria, and the cases where the 90% confidence interval of all deviation from linearity overlapped the ADL was 78.8-91.3%. CONCLUSIONS: Interpreting AMR verification data by the WLS method according to the newly revised CLSI document EP6-ED2 could reduce laboratory workload, enabling efficient laboratory practice.

An Algorithmic Approach Is Superior to the 99th Percentile Upper Reference Limits of High Sensitivity Troponin as a Threshold for Safe Discharge from the Emergency Department.

Background and Objectives: High-sensitivity cardiac troponin I (hs-TnI) is an important indicator of acute myocardial infarction (AMI) among patients presenting with chest discomfort at the emergency department (ED). We aimed to determine a reliable hs-TnI cut-off by comparing various values for a baseline single measurement and an algorithmic approach. Materials and Methods: We retrospectively reviewed the hs-TnI values of patients who presented to our ED with chest discomfort between June 2019 and June 2020. We evaluated the diagnostic accuracy of AMI with the Beckman Coulter Access hs-TnI assay by comparing the 99th percentile upper reference limits (URLs) based on the manufacturer's claims, the newly designated URLs in the Korean population, and an algorithmic approach. Results: A total of 1296 patients who underwent hs-TnI testing in the ED were reviewed and 155 (12.0%) were diagnosed with AMI. With a single measurement, a baseline hs-TnI cut-off of 18.4 ng/L showed the best performance for the whole population with a sensitivity of 78.7%, specificity of 95.7%, negative predictive value (NPV) of 97.1%, and positive predictive value (PPV) of 71.3%. An algorithm using baseline and 2-3 h hs-TnI values showed an 100% sensitivity, 97.7% specificity, an NPV of 100%, and a PPV of 90.1%. This algorithm used a cut-off of <4 ng/L for a single measurement 3 h after symptom onset or an initial level of <5 ng/L and a change of <5 ng/L to rule a patient out, and a cut-off of ≥50 ng/L for a single measurement or a change of ≥20 ng/L to rule a patient in. Conclusions: The algorithmic approach using serial measurements could help differentiate AMI patients from patients who could be safely discharged from the ED, ensuring that patients were triaged accurately and did not undergo unnecessary testing. The cut-off values from previous studies in different countries were effective in the Korean population.

Development and Application of Computerized Risk Registry and Management Tool Based on FMEA and FRACAS for Total Testing Process.

Background and Objectives: Risk management is considered an integral part of laboratory medicine to assure laboratory quality and patient safety. However, the concept of risk management is philosophical, so actually performing risk management in a clinical laboratory can be challenging. Therefore, we would like to develop a sustainable, practical system for continuous total laboratory risk management. Materials and Methods: This study was composed of two phases: the development phase in 2019 and the application phase in 2020. A concept flow diagram for the computerized risk registry and management tool (RRMT) was designed using the failure mode and effects analysis (FMEA) and the failure reporting, analysis, and corrective action system (FRACAS) methods. The failure stage was divided into six according to the testing sequence. We applied laboratory errors to this system over one year in 2020. The risk priority number (RPN) score was calculated by multiplying the severity of the failure mode, frequency (or probability) of occurrence, and detection difficulty. Results: 103 cases were reported to RRMT during one year. Among them, 32 cases (31.1%) were summarized using the FMEA method, and the remaining 71 cases (68.9%) were evaluated using the FRACAS method. There was no failure in the patient registration phase. Chemistry units accounted for the highest proportion of failure with 18 cases (17.5%), while urine test units accounted for the lowest portion of failure with two cases (1.9%). Conclusion: We developed and applied a practical computerized risk-management tool based on FMEA and FRACAS methods for the entire testing process. RRMT was useful to detect, evaluate, and report failures. This system might be a great example of a risk management system optimized for clinical laboratories.

Standardization Status of Total Cholesterol Concentration Measurement: Analysis of Korean External Quality Assessment Data.

BACKGROUND: Total cholesterol concentration measurement is important in the diagnosis of dyslipidemia and evaluation of cardiovascular disease risk factors. Measurement reliability for obtaining an accurate total cholesterol concentration requires procedure standardization. We evaluated the standardization status for total cholesterol concentration measurement through Korean external quality assessment (EQA) data analysis. METHODS: This study involved 1,670 laboratories that participated in the EQA of total cholesterol concentration measurements in 2019 for 32 products from different manufacturers. The target concentrations of three quality control (QC) materials (samples A, B, and C) were measured using the reference method and compared with EQA data. The performance criteria for total cholesterol concentration measurement were based on the National Cholesterol Education Program guidelines, with ±3% inaccuracy. RESULTS: The target values and inaccuracies of the QC material based on the reference method measurements were 254.65±7.64, 108.30±3.25, and 256.29±7.69 mg/dL (6.59±0.20, 2.80±0.08, and 6.63±0.20 mmol/L) for samples A, B, and C, respectively. The performance criteria were not met in 42.7% laboratories for sample A, 68.4% of laboratories for sample B, and 38.0% laboratories for sample C. CONCLUSIONS: Despite significant efforts to accurately measure total cholesterol concentrations, further actions are needed for measurement standardization. Manufacturers reporting values that differ from target values should check calibrator traceability; additional efforts to accurately measure total cholesterol concentrations are required for laboratories that use products from these manufacturers.

A case of bacterial keratitis caused by multi-drug-resistant Shewanella algae without marine exposure.

Shewanella are Gram-negative rods and marine pathogens. Here, we report a case of bacterial keratitis caused by Shewanella algae without marine exposure. A 66-year-old man with suspected pneumonia was sent to the emergency department from a nursing hospital. He had been in there for 2 years in a vegetative state and could not close his eyes voluntarily. Neither the patient nor his family had experienced any marine exposure. Keratitis was suspected in his right eye. Gram-negative rods grew from swab culture and identified as S. algae by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and 16S rRNA sequencing. The patient was treated with topical tobramycin, moxifloxacin and ofloxacin as well as steroids for 14 days, and the keratitis improved. S. algae is a rare human pathogen, and most human infections involve marine exposure. This is the second report of bacterial keratitis caused by S. algae worldwide and the first in Asia.

Schemes and Performance Evaluation Criteria of Korean Association of External Quality Assessment (KEQAS) for Improving Laboratory Testing.

External quality assessment (EQA) is important for evaluating clinical laboratories and enhancing their testing quality. EQA schemes are variable; thus, it is crucial that the EQA organizers share their experiences to continuously improve the EQA scheme. The Korean Association of External Quality Assessment Service (KEQAS) has been the leading, authorized EQA institute for the standardization and quality management of laboratory testing in Korean medical institutions since 1976. The EQA scheme underwent a major change in 2016, and the number of EQA programs increased significantly since then. The key changes implemented in EQA scheme include a fully computerized assessment to accelerate feedback and unification of the testing and reporting methods. We provide an overview of the EQA schemes and performance evaluation criteria of the KEQAS and suggest directions for achieving the global harmonization of EQA.

Effect of usual source of care on receiving smoking cessation advice: Korean National Health Panel data analysis.

BACKGROUND: Despite various anti-smoking policies, the smoking rate in adults is still high in Korea. Doctors' advice is known to increase the smoking cessation success rate. However, few studies have reported the effect of having a usual source of care (USC) on receiving smoking cessation advice. OBJECTIVE: To determine the effect of USC on receiving smoking cessation advice. METHODS: We performed multiple panel logistic regression analyses to identify the effect of having a USC on the rate of receiving a doctor's smoking cessation advice using 2009, 2012 and 2013 datasets from the Korea Health Panel database. Only people who responded to questions regarding a USC and smoking cessation advice were analysed. Eventually, 5243 observations were included in the final analysis. RESULTS: A higher percentage of people with a USC received smoking cessation advice from doctors (58.4% in 2009, 64.0% in 2012 and 59.6% in 2013) than those not having a USC (28.6% in 2009, 37.5% in 2012 and 34.8% in 2013). The odds ratios (ORs) of receiving smoking cessation advice in people with a USC were higher than those of people without a USC after performing multiple panel logistic regression analysis with random effects (OR: 2.24; 95% confidence interval: 1.90-2.63). CONCLUSIONS: Having a USC increased the odds of receiving a doctor's smoking cessation advice in Koreans. The results of this study suggest that a health care policy that encourages having a USC is useful in receiving more smoking cessation advice in a Korean population.