Eggshells & Eggshell Membranes- A Sustainable Resource for energy storage and energy conversion applications: A critical review.

As the world strives to achieve a sustainable future, the exploration of alternative and renewable raw materials for energy storage and energy conversion has gained significant attention. A growing trend on "Waste to Energy" approach has attained prominence. Accordingly, chicken eggshells, a residual from poultry industry, have emerged as a promising candidate due to their abundant availability, low cost, and unique physical and chemical properties. This review article presents an overview of recent advancements in utilizing eggshell waste for energy storage and energy conversion applications. It discusses the transformation of eggshells usage into functional materials, along with their performance in various energy-related applications. The potential of eggshell-based materials in improving energy efficiency and reducing environmental impact is highlighted, providing insights into the future prospects of this sustainable resource.

Innovative remediation strategies for persistent organic pollutants in soil and water: A comprehensive review.

Persistent organic pollutants (POPs) provide a serious threat to human health and the environment in soil and water ecosystems. This thorough analysis explores creative remediation techniques meant to address POP pollution. Persistent organic pollutants are harmful substances that may withstand natural degradation processes and remain in the environment for long periods of time. Examples of these pollutants include dioxins, insecticides, and polychlorinated biphenyls (PCBs). Because of their extensive existence, cutting-edge and environmentally friendly eradication strategies must be investigated. The most recent advancements in POP clean-up technology for soil and water are evaluated critically in this article. It encompasses a wide range of techniques, such as nanotechnology, phytoremediation, enhanced oxidation processes, and bioremediation. The effectiveness, cost-effectiveness, and environmental sustainability of each method are assessed. Case studies from different parts of the world show the difficulties and effective uses of these novel techniques. The study also addresses new developments in POP regulation and monitoring, highlighting the need of all-encompassing approaches that include risk assessment and management. In order to combat POP pollution, the integration of diverse remediation strategies, hybrid approaches, and the function of natural attenuation are also examined. Researchers, legislators, and environmental professionals tackling the urgent problem of persistent organic pollutants (POPs) in soil and water should benefit greatly from this study, which offers a complete overview of the many approaches available for remediating POPs in soil and water.

Highly effective direct decomposition of organic pollutants via Ag-Zn co-doped In2S3/rGO photocatalyst.

Currently, novel photocatalysts have attracted increasing attention to effectively utilizing abundant solar energy to meet the energy demands of humans and mitigate environmental burdens. In this work, we developed a novel and highly efficient photocatalyst consisting of In2S3 doped with two elements (Ag and Zn) and decorated with reduced graphene oxide (rGO) sheets. The crystal structure, morphology, electrical properties, and optical properties of the prepared materials were studied using various analytical techniques, and their photocatalytic activity was thoroughly investigated. It was confirmed that within 10 min, over 97% decomposition of organic dyes was achieved by using Ag-Zn co-doped In2S3/rGO catalyst, while only 50 and 60% decompositions were achieved by conventional pure In2S3 and In2S3/rGO nanocomposite, respectively. Its photoelectrochemical (PEC) water-splitting performance was also significantly improved (∼120%) compared with pure In2S3 nanoparticles. This study provides a new vision of using Ag-Zn:In2S3 decorated on rGO sheets as an efficient photocatalyst under solar light irradiation for environmental remediation and hydrogen production.

NiO/Ni Nanowafer Aerogel Electrodes for High Performance Supercapacitors.

Transition metal oxide aerogels are a fascinating class of compounds that have received considerable attention in the last decade owing to their unique and exceptional properties, including high porosity, large surface area, and ultralow density. In this study, α-Ni(OH)2 aerogels and annealed NiO/Ni aerogels were used to design and fabricate a two-electrode supercapacitor device. The physicochemical properties of the as-synthesized aerogels were characterized through X-ray diffraction, scanning electron microscopy, transmission electron microscopy, the Brunauer-Emmett-Teller theory, and X-ray photoelectron spectroscopy studies. The annealed NiO/Ni aerogels showed a (specific capacitance of 1060 F/g) specific capacity of 422 C/g at 1 A/g current density and with good cycling stability (up to 10,000 cycles). The supercapacitor also demonstrated an energy density of 32.4 Wh/kg and power density of 1800 W/kg at a current density of 2 A/g. The specific capacitance of NiO/Ni aerogels was more than twice that of the α-Ni(OH)2 aerogels. The practical applications of the aerogel were demonstrated by fabricating a two-electrode device.

Influence of the Al-Doped ZnO Sputter-Deposition Temperature on Cu(In,Ga)Se2 Solar Cell Performance.

Heterojunction Cu(In,Ga)Se2 (CIGS) solar cells comprise a substrate/Mo/CIGS/CdS/i-ZnO/ZnO:Al. Here, Al-doped zinc oxide (AZO) films were deposited by magnetron sputtering, and the substrate temperature was optimized for CIGS solar cells with two types of CIGS light absorbers with different material properties fabricated by three-stage co-evaporation and two-step metallization followed by sulfurization after selenization (SAS). The microstructure and optoelectronic properties of the AZO thin films fabricated at different substrate temperatures (150-550 °C) were analyzed along with their effects on the CIGS solar cell performance. X-ray diffraction results confirmed that all the deposited AZO films have a hexagonal wurtzite crystal structure regardless of substrate temperature. The optical and electrical properties of the AZO films improved significantly with increasing substrate temperature. Photovoltaic performances of the two types of CIGS solar cells were influenced by changes in the AZO substrate temperature. For the three-stage co-evaporated CIGS cell, as the sputter-deposition temperature of the AZO layer was raised from 150 °C to 550 °C, the efficiencies of CIGS devices decreased monotonically, which suggests the optimum AZO deposition temperature is 150 °C. In contrast, the cell efficiency of CIGS devices fabricated using the two-step SAS-processed CIGS absorbers improved with increasing the AZO deposition temperature from 150 to 350 °C. However, the rise in AZO deposition temperature to 550 °C decreased the cell efficiency, indicating that the optimum AZO deposition temperature was 350 °C. The findings of this study provide insights for the efficient fabrication of CIGS solar cells considering the correlation between CIGS absorber characteristics and AZO layer deposition temperature.

Effect of Bacillus coagulans SNZ 1969 on the Improvement of Bowel Movement in Loperamide-Treated SD Rats.

Bacillus coagulans SNZ 1969 (B. coagulans SNZ 1969) is a spore-forming bacterium reported to be effective in attenuating constipation. However, there is no study on whether B. coagulans SNZ 1969 could improve constipation through mucin secretion and changes in intestinal hormones. To address this knowledge gap, rats were orally administrated with various treatments for four weeks. The normal control (NOR) group received saline only. There were four constipation-induced groups. The LOP group received only loperamide (LOP), a constipation-inducing agent. The BIS group received both LOP and Bisacodyl (BIS, a constipation treatment agent). The SNZ-L group received both LOP and B. coagulans SNZ 1969 at 1 × 108 CFU/day. The SNZ-H group received LOP and B.coagulans SNZ 1969 at 1 × 1010 CFU/day. As indicators of constipation improvement, fecal pellet weight, fecal water content, gastrointestinal transit time, and intestinal motility were measured. Mucus secretion in the colon was determined by histological colon analysis and mucin-related gene expressions. Gastrointestinal (GI) hormones were also measured. SNZ-L and SNZ-H groups showed significantly increased fecal weights, fecal water contents, and intestinal motility than the LOP group. SNZ-L and SNZ-H groups also showed higher secretion of mucin in the colon and mRNA expression levels of Mucin 2 and Aquaporin 8 than the LOP group. The SNZ-H group showed significantly increased substance P but significantly decreased somatostatin and vasoactive intestinal peptide than the LOP group. The results of this study suggest that B. coagulans SNZ 1969 intake could attenuate constipation through mucin secretion and alteration of GI hormones.

Ternary Nanohybrid of Ni3S2/CoMoS4/MnO2 on Nickel Foam for Aqueous and Solid-State High-Performance Supercapacitors.

To overcome the issues related to supercapacitor (SC) electrodes, such as high cost, low specific capacitance (Cs), low energy density (ED), requirements for expensive binder, etc., binderless electrodes are highly desirable. Here, a new ternary nanohybrid is presented as a binder-free SC electrode based on Ni3S2, CoMoS4, and MnO2. A facile two-step hydrothermal route, followed by a short thermal annealing process, is developed to grow amorphous polyhedral structured CoMoS4 and further wrap MnO2 nanowires on Ni foam. This rationally designed binder-free electrode exhibited the highest Cs of 2021 F g-1 (specific capacity of 883.8 C g-1 or 245.5 mAh g-1) at a current density of 1 A g-1 in 1 M KOH electrolyte with a highly porous surface morphology. This electrode material exhibited excellent cycling stability (90% capacitance retention after 4000 cycles) due to the synergistic contribution of individual components and advanced surface properties. Furthermore, an aqueous binder-free asymmetric SC based on this ternary composite exhibited an ED of 20.7 Wh kg-1, whereas a solid-state asymmetric SC achieved an ED of 13.8 Wh kg-1. This nanohybrid can be considered a promising binder-free electrode for both aqueous and solid-state asymmetric SCs with these remarkable electrochemical properties.

Synthesis and Characterization of Cu2ZnSnSe4 by Non-Vacuum Method for Photovoltaic Applications.

Wet ball milling was used for the synthesis of Cu2ZnSnSe4 (CZTSe) nanoparticles with a kesterite structure. The prepared nanoparticles were used for ink formulation. Surfactants and binders were added to improve the ink stability, prevent agglomeration, and enhance ink adhesion. The films deposited via spin coating were annealed at different temperatures using a rapid thermal processing system in the presence of selenium powder in an inert environment. Analytical techniques, such as X-ray diffraction, Raman spectroscopy, and Fourier-transform infrared spectroscopy, were used to confirm the formation of CZTSe nanoparticles with a single-phase, crystalline kesterite structure. Field-emission scanning electron microscopy and energy-dispersive X-ray spectroscopy were used to study the surface morphology and chemical composition of the thin films before and after annealing, with and without the sodium solution. The optoelectrical properties were investigated using ultraviolet-visible spectroscopy and Hall measurements. All the prepared CZTSe thin films exhibited a p-type nature with an optical bandgap in the range of 0.82-1.02 eV. The open-circuit voltage and fill factor of the CZTSe-based devices increased from 266 to 335 mV and from 37.79% to 44.19%, respectively, indicating a decrease in the number of recombination centers after Na incorporation.

Cow's Milk Intake and Risk of Coronary Heart Disease in Korean Postmenopausal Women.

Numerous studies have reported conflicting results associated with cow's milk intake and coronary heart disease (CHD). However, studies involving postmenopausal women are very limited. This study was therefore undertaken to identify the relationship between cow's milk intake and CHD risk in postmenopausal women, using data from the 6th period of the Korea National Health and Nutrition Examination Survey (2013−2015). A total of 1825 postmenopausal women, aged 50−64 years old, were included in the final analysis. The frequency of cow's milk consumption for each subject was determined using the semi-quantitative food frequency questionnaire, and was classified into four groups (Q1−Q4): Q1, group that did not drink milk (no milk, n = 666); Q2, 0 < frequency of milk intake per week ≤ 1 (n = 453); Q3, 1 < frequency of milk intake per week ≤ 3 (n = 319); and Q4, frequency of milk intake >3 times per week (n = 387). General characteristics, such as education, living area, household income, and obesity level, were compared between the four groups. Percentages of daily nutrient intake compared to the dietary reference intake for Koreans (KDRIs) were determined, and the Framingham Risk Score (FRS), atherogenic index (AI), and atherogenic index of plasma (AIP) were determined as the CHD risk indicators. Except household income, no significant difference was obtained among the four groups with respect to age, education, living area, or obesity. Compared to KDRIs, the intake ratio of calcium, phosphorus, and riboflavin were significantly higher in the Q4 group than in the Q1−Q3 groups. Blood HDL-cholesterol was significantly higher in Q4 than in Q1. The CHD risk factors FRS (%), AI, and AIP were significantly lower in the Q4 group as compared to the other groups (CHD risk (%): Q1 9.4, Q4 8.5; AI: Q1 3.06, Q4 2.83; API: Q1 0.37, Q2 0.31, Q4 0.32). FRS was determined to be significantly and positively correlated to AI or AIP, and negatively correlated with the cow's milk intake frequency and calcium intake. In conclusion, compared to women who do not consume cow's milk, postmenopausal women who consume cow's milk frequently have a better nutritional status of calcium, phosphorus, and vitamin B12, higher HDL levels, and a lower level of CHD risk indicators, such as FRS, AI, and AIP, contributing to decreased CHD risk in a 10-year period. Therefore, to prevent the risk of CHD in postmenopausal women, there needs to be a greater emphasis for cow's milk consumption four or more times per week.

Fabrication of Cu2ZnSnS4 Light Absorber Using a Cost-Effective Mechanochemical Method for Photovoltaic Applications.

In the present study, we adopt an easy and cost-effective route for preparing Cu2ZnSnS4 (CZTS)-absorber nanoparticles by a mechanochemical method using non-toxic and environmentally benign solvents (butanol, methyl ethyl ketone, and ethanol). The gram-scale synthesis of absorber nanoparticles was achieved in a non-hazardous, zero-waste process without using high-vacuum equipment. The effects of annealing and Na incorporation on the properties of spin-coated CZTS thin films were scrutinized. The deposited samples showed kesterite crystal structure and single phase. The morphological results revealed an improvement in the surface morphology after annealing. The optical bandgaps of the thin films lied in the range of 1.50-1.57 eV with p-type nature. Finally, photovoltaic devices were fabricated, and their cell performance parameters were studied. An efficiency of 0.16% was observed. The present study provides a potential route for the cost-effective fabrication of CZTS-based photovoltaic devices.

SnS2 Nanoparticles and Thin Film for Application as an Adsorbent and Photovoltaic Buffer.

Energy consumption and environmental pollution are major issues faced by the world. The present study introduces a single solution using SnS2 for these two major global problems. SnS2 nanoparticles and thin films were explored as an adsorbent to remove organic toxic materials (Rhodamine B (RhB)) from water and an alternative to the toxic cadmium sulfide (CdS) buffer for thin-film solar cells, respectively. Primary characterization tools such as X-ray photoelectron spectroscopy (XPS), Raman, X-ray diffraction (XRD), and UV-Vis-NIR spectroscopy were used to analyze the SnS2 nanoparticles and thin films. At a reaction time of 180 min, 0.4 g/L of SnS2 nanoparticles showed the highest adsorption capacity of 85% for RhB (10 ppm), indicating that SnS2 is an appropriate adsorbent. The fabricated Cu(In,Ga)Se2 (CIGS) device with SnS2 as a buffer showed a conversion efficiency (~5.1%) close to that (~7.5%) of a device fabricated with the conventional CdS buffer, suggesting that SnS2 has potential as an alternative buffer.

Highly active Z-scheme heterojunction photocatalyst of anatase TiO2 octahedra covered with C-MoS2 nanosheets for efficient degradation of organic pollutants under solar light.

The construction of a Z-scheme photocatalyst by coupling semiconductors with conductors is an efficient way to achieve high pollutant degradation efficiency. In this study, a hydrothermal approach was used to fabricate a Z-scheme photocatalyst consisting of C-MoS2 sheets wrapped around octahedral anatase TiO2 nanocrystals. The catalyst showed excellent photocatalytic efficiency (99%) for methylene blue degradation with low catalyst loading (0.2 g L-1) under the simulated solar light within 60 min. High photocatalytic degradation efficiencies were also observed for Rhodamine B, methyl orange, and tetracycline under solar irradiation. The C-MoS2 acts as an electron mediator and serves as a carrier transmission bridge for the efficient electron-hole separation. The electron-rich (101)-faceted TiO2 benefits the Z-scheme recombination of electrons from the conduction band of TiO2 and holes at the valence band of MoS2. The semiconductor coupling of (101)-exposed octahedral TiO2 and 2H-MoS2 as well as the introduction of solid-state electron mediators, 1T-MoS2 and carbon, resulted in increased light absorption and accelerated charge transfer at the contact interface, which enhanced the photocatalytic activity of the photocatalyst significantly compared to those of P25, MoS2/TiO2, and C-MoS2. The efficient separation of electron-hole pairs prolongs their lifetime for oxidation and reduction reactions in the degradation process.

Nanostructurally engineered TiO2 embedded Mentha aquatica biowaste derived carbon for supercapacitor applications.

The invention of cost-effective, clean, and eco-friendly energy storage technology has been capturing a lot of worldwide interest. Herein, biogenically synthesized TiO2 nanoparticles (NPs) were ultrasonically coupled with biomass-derived activated carbon (BAC) to obtain composite (denoted as TiO2@BAC). With the inspiration of nature, Mentha Aquatica leaves extract was employed for biogenic preparation of TiO2 NPs, and residual solid waste (SW) after extract was subsequently utilized for BAC. It is noteworthy that, this unique intensive method does not require any harmful or toxic chemicals and solvents, and no secondary waste is generated. TEM analysis of TiO2@BAC revealed spherical morphology of TiO2 NPs (average size âˆ¼ 18 nm) that were accumulated on nanosheets. Raman, XRD, and XPS manifested the successful construction of TiO2@BAC. The electrochemical performance of the as-synthesized BAC, TiO2 NPs, and TiO2@BAC electrodes was tested towards supercapacitor applications. Notably, the TiO2@BAC electrode exhibited capacitance of 149 F/g at a current density of 1 A/g, which is approximately twice than that of the bare TiO2 electrode (76 F/g) along with excellent capacitance restoration of ∼99%. The TiO2@BAC electrode further revealed outstanding cyclic stability, exhibiting capacitance retention of ∼90% (at 5 A/g) after 10,000 charge/discharge cycles. Furthermore, the TiO2@BAC electrode delivered optimal specific energy density (6.96 Wh/kg) and large power density (2.07 kW/kg at 10 A/g). Moreover, the TiO2@BAC delivers an excellent restoration and retention performances of ∼100 and ∼95% (after 10,000 cycles) at 1 A/g with ∼98% coulombic efficiency in symmetric configuration (maximum cell voltage of 1.2 V).

Poly(caffeic acid) Redox Couple Decorated on Electrochemically Reduced Graphene Oxide for Electrocatalytic Sensing Free Chlorine in Drinking Water.

Regular water quality measurements are essential to the public water supply. Moreover, selective free chlorine (disinfectant) level monitoring without an interfering agent is necessary. The present work aimed to fabricate poly(caffeic acid) (p-CFA) coated on an electrochemically reduced graphene oxide (ERGO) surface for the selective detection of free chlorine. Electron microscopy and various spectroscopic techniques confirmed the p-CFA@ERGO/glassy carbon (GC) electrode. The p-CFA@ERGO/GC coated probe surface coverage was calculated to be 4.75 × 10-11 mol cm-2. The p-CFA@ERGO/GC showed superior catechol/o-quinone oxidation/reduction peaks for electrocatalytic free chlorine determination. The performance of the developed sensor electrode was outstanding, with an extensive range of free chlorine detection (20 µM to 20 mM), high sensitivity (0.0361 µA µM-1), and low detection limit (0.03 µM). The p-CFA@ERGO/GC capability of the realist water samples, such as the tested commercial and tap water, yielded a good range of recovery (from 98.5% to 99.9%). These values align with the standard N,N'-diethyl-p-phenylenediamine reagent method results.

Fundamental Aspects and Comprehensive Review on Physical Properties of Chemically Grown Tin-Based Binary Sulfides.

The rapid research progress in tin-based binary sulfides (SnxSy = o-SnS, c-SnS, SnS2, and Sn2S3) by the solution process has opened a new path not only for photovoltaics to generate clean energy at ultra-low costs but also for photocatalytic and thermoelectric applications. Fascinated by their prosperous developments, a fundamental understanding of the SnxSy thin film growth with respect to the deposition parameters is necessary to enhance the film quality and device performance. Therefore, the present review article initially delivers all-inclusive information such as structural characteristics, optical characteristics, and electrical characteristics of SnxSy. Next, an overview of the chemical bath deposition of SnxSy thin films and the influence of each deposition parameter on the growth and physical properties of SnxSy are interestingly outlined.

Synthesis and Characterization of π-SnS Nanoparticles and Corresponding Thin Films.

Tin sulfide polymorph (π-SnS) nanoparticles exhibit promising optoelectrical characteristics for photovoltaic and hydrogen production performance, mainly because of the possibility of tuning their properties by adjusting the synthesis conditions. This study demonstrates a chemical approach to synthesize π-SnS nanoparticles and the engineering of their properties by altering the Sn precursor concentration (from 0.04 M to 0.20 M). X-ray diffraction and Raman studies confirmed the presence of pure cubic SnS phase nanoparticles with good crystallinity. SEM images indicated the group of cloudy shaped grains, and XPS results confirmed the presence of Sn and S in the synthesized nanoparticles. Optical studies revealed that the estimated energy bandgap values of the as-synthesized π-SnS nanoparticles varied from 1.52 to 1.68 eV. This work highlights the effects of the Sn precursor concentration on the properties of the π-SnS nanoparticles and describes the bandgap engineering process. Optimized π-SnS nanoparticles were used to deposit nanocrystalline π-SnS thin films using the drop-casting technique, and their physical properties were improved by annealing (300 °C for 2 h).

The Combined Effects of Milk Intake and Physical Activity on Bone Mineral Density in Korean Adolescents.

The purpose of this study was to examine the combined effects of milk intake and physical activity on bone mineral density in adolescents. This study was conducted using data from the 2009-2011 Korea National Health and Nutrition Examination Survey (KNHANES), which provided measurements of bone mineral density (BMD) in addition to basic health-related data. This study included 1061 adolescents aged 13 to 18 years (557 males and 504 females) whose data on milk intake and participation time in moderate to vigorous physical activity were available. BMD was measured by dual-energy X-ray absorptiometry (DXA). Milk intake was assessed using the 24-h recall method, and the levels of physical activity were examined using a questionnaire. The physical activity questions of 2009-2011 KNHANES were based on the Korean version of the International Physical Activity Questionnaire (IPAQ) short form. The subjects were classified into four groups according to milk intake and physical activity level: no milk intake + low-level physical activity group (MnoPlow), no milk intake + high-level physical activity group (MnoPhigh), milk intake + low-level physical activity group (MyesPlow), and milk intake + high-level physical activity group (MyesPhigh). The results of partial correlation controlling for age, body mass index (BMI), and energy intake showed that the BMD variables were associated significantly with physical activity in both males and females. Among males, the MnoPlow group had the lowest BMD in all BMD variables, showing a significant difference from the high-level physical activity groups (MnoPhigh, MyesPhigh) by multiple logistic regression analysis. Among females, the MyesPhigh group showed a significantly higher lumbar BMD value than the other groups. The MnoPlow group had approximately 0.3 to 0.5 times lower odds ratio for median or higher BMD values, compared to MyesPhigh group. These results show that milk intake and physical activity have a combined effect on BMD, and suggest that to achieve healthy bone growth, it is important to encourage both moderate to vigorous physical activity and milk intake during adolescence.

Effect of saccharin on inflammation in 3T3-L1 adipocytes and the related mechanism.

BACKGROUND/OBJECTIVES: Excessive intake of simple sugars induces obesity and increases the risk of inflammation. Thus, interest in alternative sweeteners as a sugar substitute is increasing. The purpose of this study was to determine the effect of saccharin on inflammation in 3T3-L1 adipocytes. MATERIALS/METHODS: 3T3-L1 preadipocytes were differentiated into adipocytes. The adipocytes were treated with saccharin (0, 50, 100, and 200 µg/mL) for 24 h. Inflammation was induced by exposure of treated adipocytes to lipopolysaccharide (LPS) for 18 h and cell proliferation was measured. The concentration of nitric oxide (NO) was measured by using Griess reagent. Protein expressions of nuclear factor kappa B (NF-κB) and inhibitor κB (IκB) were determined by western blot analysis. The mRNA expressions of inducible nitric oxide synthase (iNOS), cyclooxygenase-2 (COX-2), interleukin 1ß (IL-1ß), interleukin 6 (IL-6), monocyte chemoattractant protein-1 (MCP-1), and tumor necrosis factor-α (TNF-α) were determined by real-time PCR. RESULTS: Compared with the control group, the amount of NO and the mRNA expression of iNOS in the LPS-treated group were increased by about 17.6% and 46.9%, respectively, (P < 0.05), and those parameter levels were significantly decreased by saccharin treatment (P < 0.05). Protein expression of NF-κB was decreased and that of IκB was increased by saccharin treatment (P < 0.05). Saccharin decreased the mRNA expression of COX-2 and the inflammation cytokines (IL-1ß, IL-6, MCP-1, and TNF-α) (P < 0.05). CONCLUSIONS: The results of this study suggest that saccharin can inhibit LPS-induced inflammatory responses in 3T3-L1 adipocytes via the NF-κB pathway.

Performance of Graphene-CdS Hybrid Nanocomposite Thin Film for Applications in Cu(In,Ga)Se2 Solar Cell and H2 Production.

A graphene-cadmium sulfide (Gr-CdS) nanocomposite was prepared by a chemical solution method, and its material properties were characterized by several analysis techniques. The synthesized pure CdS nanoparticles (NPs) and Gr-CdS nanocomposites were confirmed to have a stoichiometric atomic ratio (Cd/S = 1:1). The Cd 3d and S 2p peaks of the Gr-CdS nanocomposite appeared at lower binding energies compared to those of the pure CdS NPs according to X-ray photoelectron spectroscopy analyses. The formation of the Gr-CdS nanocomposite was also evidenced by the structural analysis using Raman spectroscopy and X-ray diffraction. Transmission electron microscopy confirmed that CdS NPs were uniformly distributed on the graphene sheets. The absorption spectra of both the Gr-CdS nanocomposite and pure CdS NPs thin films showed an absorption edge at 550 nm related to the energy band gap of CdS (~2.42 eV). The Cu(In,Ga)Se2 thin film photovoltaic device with Gr-CdS nanocomposite buffer layer showed a higher electrical conversion efficiency than that with pure CdS NPs thin film buffer layer. In addition, the water splitting efficiency of the Gr-CdS nanocomposite was almost three times higher than that of pure CdS NPs.

Effects of Phytochemicals on Blood Pressure and Neuroprotection Mediated Via Brain Renin-Angiotensin System.

BACKGROUND: The renin-angiotensin system (RAS) in the brain plays a crucial role in maintaining blood pressure as well as neuroprotection. This study compared the effects of curcumin, quercetin, and saponin on blood pressure, the brain RAS, and cholinergic system using perindopril, an angiotensin converting enzyme inhibitor (ACEI), as a positive control. METHODS: Five-week-old male mice were stabilized and randomly assigned into a control group (n = 8), three phytochemical-treated groups (curcumin (n = 8), quercetin (n = 8), and saponin (n = 8)), and a positive control group (n = 8). The groups treated with the phytochemical were orally administered daily at a dose of 50 mg/kg body weight of phytochemicals. During the experiments, the weight and dietary intakes were measured regularly. After experiments, the brain tissue was homogenized and centrifuged for an additional assay. The concentrations of ACE, angiotensin II (AngII), and aldosterone levels were measured, and the mRNA expressions of renin and ACE were measured. As biomarkers of neuroprotection, the concentrations of acetylcholine(Ach) as well as the concentration and activity of acetylcholine esterase (AChE) were measured. RESULTS: After 4 weeks of treatment, the perindopril group showed the lowest blood pressure. Among the groups treated with the phytochemicals, treatment with curcumin and saponin significantly reduced blood pressure, although such effect was not as high as that of perindopril. Among phytochemicals, curcumin treatment significantly inhibited the concentration and activity of ACE, concentration of AngII, and mRNA expression of ACE. All phytochemical treatments significantly increased the concentration of ACh. The levels of AChE activity in groups exposed to curcumin or saponin (not quercetin) were significantly inhibited, Conclusion: Curcumin administration in rats reduced blood pressure by blocking the brain RAS components and protected the cholinergic system in brain by inhibiting the activity of AChE.