Microplastic accumulation dynamics in Han river headwaters: Sediment interactions and environmental implication.

The prevalence of microplastic (MP) contamination has become a significant environmental concern due to its pervasive nature and persistent effects. While sediments are considered major repositories for MPs, information on their spatial distribution within these matrices is insufficient. This research examined both the horizontal and vertical presence of MPs in the sediments surrounding Lake Paldang in South Korea, alongside a comprehensive evaluation of the physicochemical characteristics of the samples obtained. The total content of MPs varied from 2.15 to 122.2 particles g-1. The average contents of MPs on surface sediments were 40.47, 34.14, 5.01, and 8.19 particles g-1 in north mainstream (NM), south mainstream (SM), tributary (TB), and Tributary catchment (TC) based on Sonae Island, Gyeongan stream, respectively. The most abundant MP types were polyethylene (PE), polytetrafluoroethylene (PTFE), and polypropylene (PP), accounting for more than 70% of the total MPs. The most abundant sizes of MPs were within 45-100 µm. At all sediment depths, polymers were distributed in the order PE, PP, and polyester in NM, SM, and TC, respectively, whereas PTFE mainly occurred in the surface layer. MPs distribution also exhibited seasonal variation as larger inflows and flow rates varied with season.

Aging effects on osteoclast progenitor dynamics affect variability in bone turnover via feedback regulation.

Bone turnover markers (BTMs) are commonly used in osteoporosis treatment as indicators of cell activities of bone-resorbing osteoclasts and bone-forming osteoblasts. The wide variability in their values due to multiple factors, such as aging and diseases, makes it difficult for physicians to utilize them for clinical decision-making. The progenitors of osteoclasts and osteoblasts are indispensable for a comprehensive interpretation of the variability in BTM values because these upstream progenitors strongly regulate the downstream cell activities of bone turnover. However, understanding the complex interactions among the multiple populations of bone cells is challenging. In this study, we aimed to gain a fundamental understanding of the mechanism by which the progenitor dynamics affect the variability in bone turnover through in silico experiments by exploring the cell dynamics with aging effects on osteoporosis. Negative feedback control driven by the consumptive loss of progenitors prevents rapid bone loss due to excessive bone turnover, and through feedback regulation, aging effects on osteoclast differentiation and osteoclast progenitor proliferation cause variability in the osteoclast and osteoblast activity balance and its temporal transition. By expressing the variability in the bone turnover status, our model describes the individualities of patients based on their clinical backgrounds. Therefore, our model could play a powerful role in assisting tailored treatment and has the potential to resolve the various health problems associated with osteoporosis worldwide.

Bio-inspired interfacial chemistry for the fabrication of a robust and functional graphene oxide composite film.

A strong and functional artificial nacre film is developed by using polyethyleneimine-functionalized GO (PEI-GO) and pyrogallol (PG) inspired by insect exoskeleton sclerotization. PEI-GO is macroscopically assembled into the laminated films and then reacted with PG under the optimized condition for their efficient cross-linking through Schiff-base reactions. The internal structure and physicochemical properties of PG-treated PEI-GO (PG@PEI-GO) films are systematically explored with various analytical tools. The optimized PG@PEI-GO films exhibit excellent tensile strength, modulus, and toughness of 216.0 ± 12.9 MPa, 17.0 ± 1.1 GPa, and 2192 ± 538.5 kJ m-3 which are 2.7, 2.8, and 2.3-fold higher than those of GO films, respectively. Furthermore, silver nanoparticles (AgNPs) are densely immobilized on the PG@PEI-GO films harnessing their abundant amine groups, and the AgNPs immobilized PG@PEI-GO films exhibit a high catalytic activity in the conversion of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) with maintaining structural integrity. Based on the results, we demonstrate that the rational design of interfaces, inspired by natural materials, is an efficient approach to achieving strong and functional GO laminated composite films.

Structural insight into crystal structure of helicase domain of DDX53.

DEAD box helicase proteins are a family of RNA helicases that participate in various RNA metabolisms such as RNA unwinding, RNA processing, and RNPase activities. A particular DEAD box protein, the DDX53 protein, is primarily expressed in cancer cells and plays a crucial role in tumorigenesis. Numerous studies have revealed that DDX53 interacts with various microRNA and Histone deacetylases. However, its molecular structure and the detailed binding interaction between DDX53 and microRNA or HDAC is still unclear. In this study, we used X-ray crystallography to investigate the 3D structure of the hlicase C-terminal domain of DDX53, and successfully determined its crystal structure at a resolution of 1.97 Å. Subsequently, a functional analysis of RNA was conducted by examining the binding properties thereof with DDX53 by transmission electron microscopy and computing-based molecular docking simulation. The defined 3D model of DDX53 not only provides a structural basis for the fundamental understanding of DDX53 but is also expected to contribute to the field of anti-cancer drug discovery such as structure-based drug discovery and computer-aided drug design.

Amyloid Fibers Increase Free Radicals of Synthetic Melanin.

Functional amyloid fibers are crucial in melanogenesis, but their roles are incompletely understood. In particular, their relationship with intrinsic spin characters of melanin remains unexplored. Here, we show that adding an amyloid scaffold greatly augments the spin density in synthetic melanin. It also brings about concurrent alterations in water dispersibility, bandgaps, and radical scavenging properties of the synthetic melanin, which facilitates its applications in solar water remediation and protection of human keratinocytes from UV irradiation. This work provides implications in the unrevealed role of functional amyloid in melanogenesis and in the origin of the superiority of natural melanin toward its synthetic variants in terms of the spin-related properties.

Composite Membrane Based on Melamine Sponge and Boehmite Manufactured by Simple and Economical Dip-Coating Method for Fluoride Ion Removal.

The wastewater generated from the semiconductor production process contains a wide range and a large number of harmful substances at high concentrations. Excessive exposure to fluoride can lead to life-threatening effects such as skin necrosis and respiratory damage. Accordingly, a guideline value of fluoride ions in drinking water was 1.5 mg L-1 recommended by the World Health Organization (WHO). Polyvinylidene fluoride (PVDF) has the characteristics of excellent chemical and thermal stability. Boehmite (AlOOH) is a mineral and has been widely used as an adsorbent due to its high surface area and strong adsorption capacity for fluoride ions. It can be densely coated on negatively charged surfaces through electrostatic interaction due to its positively charged surface. In this study, a composite membrane was fabricated by a simple and economical dip coating of a commercial melamine sponge (MS) with PVDF and boehmite to remove fluoride ions from semiconductor wastewater. The prepared MS-PVDF-Boehmite composite membrane showed a high removal efficiency for fluoride ions in both incubation and filtration. By the incubation process, the removal efficiency of fluoride ions was 55% within 10 min and reached 80% after 24 h. In the case of filtration, the removal efficiency was 95.5% by 4 cycles of filtering with a flow rate of 70 mL h-1. In addition, the removal mechanism of fluoride ions on MS-PVDF-Boehmite was also explored by using Langmuir and Freundlich isotherms and kinetic analysis. (R2-1) From the physical, chemical, thermal, morphological, and mechanical analyses of present materials, this study provides an MS-PVDF-Boehmite composite filter material that is suitable for fluoride removal applications due to its simple fabrication process, cost-effectiveness, and high performance.

Biorenewable Polymer-Based Light-Absorbing Porous Hydrogel for Efficient Solar Steam Desalination.

An efficient interfacial heating system composed of a light-absorbing material and a hydrophilic porous support is developed through eco-friendly and energy-effective fabrication processes. Lignin nanoparticles (NPs) and cellulose nanofibers (CNFs) are harnessed as biorenewable light absorbers and hydrophilic supports, respectively. Lignin NPs are prepared using a solvent exchange process of the fractionated lignin with organic solvents to improve its π-π stacking and light-absorbing property for efficient photothermal conversion. Then, the lignin NPs are mixed with CNFs and lyophilized to obtain a light-absorbing porous hydrogel (LAPH), and the resulting LAPHs are covalently cross-linked and hybridized with Au NPs through a seed-mediated growth to further enhance their mechanical stability, hydrophilicity, and photothermal conversion properties. The resulting LAPHs exhibit an outstanding and prolonged performance as a solar steam generator such as high salt and pH tolerance, evaporation rate (3.17 kg m-2 h-1), and solar steam generation efficiency (83.4%) under 1 sun irradiation.

Surface-facilitated formation of polydopamine and its implications in melanogenesis.

This manuscript examines influences of differently functionalized surfaces on the formation of solution-dispersed polydopamine (pDA). Glass vials functionalized with different functional groups provided a set of conditions with which the relationship between the area of active surface and the rate of pDA formation could be systematically studied. The results suggest that charged and polar surfaces accelerate pDA formation in solution, with the effect of -NH2 surfaces being exceptionally strong. In the vials, pDA formed as both forms of dispersions in solution and films at solid-liquid interface. Further analyses confirmed that both forms of pDA formed with -NH2 surfaces were chemically similar to conventional pDA synthesized without help of functional surfaces. Among short peptide-based amyloid fibers with defined surface functional groups, and those displaying lysines (-NH2) greatly accelerated the formation of pDA, consistent with the results of -NH2-functionalized vials. The results suggest that pDA formation may be facilitated by surface functional groups of solid-liquid interfaces, and have implications for the overlooked roles of amyloid fibers in biological melanogenesis.

Exploring the Chemical Structures and Phototochemical Properties of Graphene Oxide Derivatives by Laser Desorption/Ionization Time-of-Flight Mass Spectrometry to Develop an Efficient Platform for Mass Spectrometric Analysis.

Laser desorption/ionization time-of-flight mass spectrometry (LDI-TOF-MS) analysis is harnessed to investigate the chemical structure and photochemical properties of two distinct graphene oxide (GO) derivatives simultaneously. The GO derivatives are synthesized with modified Brodie's method (BGO) and Hummers' method (HGO) and characterized by LDI-TOF-MS as well as conventional tools. A series of LDI-TOF-MS analyses reveal that BGO provides higher laser energy absorption, photochemical stability, and photothermal conversion property than HGO based on their fragmentation patterns and laser desorption/ionization behavior of a thermometer molecule. Based on these characteristics, BGO exhibits higher efficiency in the LDI-TOF-MS analysis of various small molecules and synthetic polymers than HGO. These different photochemical properties of BGO are derived from its large sp2 carbon domains compared to HGO. Based on our findings, the analytical potential of LDI-TOF-MS for GO derivatives is clearly demonstrated, which can be an efficient and unique characterization tool to explore both chemical structures and photochemical properties of various carbon materials.

Rhodium-Tellurium Nanorod Synthesis Using Galvanic Replacement-Polyol Regrowth for Thermo-Dynamic Dual-Modal Cancer Phototherapy.

Rh is a noble metal introduced in bioapplications, including diagnosis and therapy, in addition to its consolidated utilization in organic catalysis and electrocatalysis. Herein, we designed the synthesis of highly crystalline Rh nanocrystal-decorated Rh-Te nanorods (RhTeNRs) through galvanic replacement of sacrificial Te nanorod (TeNR) templates and subsequent polyol regrowth. The obtained RhTeNRs showed excellent colloidal stability and efficient heat dissipation and photocatalytic activity under various laser irradiation wavelengths. Based on the confirmed biocompatibility, RhTeNRs were introduced into in vitro and in vivo cancer phototherapies. The results confirmed the selective physical death of cancer cells in the local area through laser irradiation. While chemotherapy does not guarantee successful treatment due to side effects and resistance, phototherapy using heat and reactive oxygen species generation of RhTeNRs induces physical death.

Investigation of the Ligand Exchange Process on Gold Nanorods by Using Laser Desorption/Ionization Time-of-Flight Mass Spectrometry.

The ligand exchange process on gold nanorods (Au NRs) was explored by using laser desorption/ionization time-of-flight mass spectrometry (LDI-TOF-MS). Cetyltrimethylammonium bromide (CTAB) adsorbed on Au NRs was replaced with alkanethiol derivatives presenting different functional groups. The ligand exchange process was investigated under various conditions, such as in the presence of different functional groups in the ligands and with different concentrations of CTAB. The ligand-exchanged Au NRs were characterized by using a combination of UV-Vis spectroscopy and LDI-TOF-MS. Based on the results, it was revealed that LDI-TOF-MS analysis can provide crucial and distinct information about the degree of ligand exchange on Au NRs.

Efficient Protection of Silver Nanowire Transparent Electrodes by All-Biorenewable Layer-by-Layer Assembled Thin Films.

An efficient protection strategy for silver nanowire-based transparent electrodes (AgNW TEs) is developed to enhance their poor adhesion force on substrates and thermal, optical, chemical, and electrical stabilities. Chitin nanofibers (CNFs) and alkali lignin (AL), which possess high mechanical property, a gas/moisture barrier, and UV absorption properties, are successively assembled on AgNW TEs through layer-by-layer (LBL) assembly based on their oppositely charged surfaces. The formation of LBL-assembled CNFs and AL (CNF/AL)10 bilayers, where 10 is the optimized number of bilayers, on the aldehyde-modified AgNW (Al-AgNW) TEs does not deteriorate their electrical conductivity (17.3 ± 2.1 Ω/□) and transmittance (90.1 ± 0.3% at 550 nm), and the (CNF/AL)10 bilayer-coated Al-AgNW [(CNF/AL)10@Al-AgNW] TEs present considerable enhancement in their adhesion force and thermal, optical, chemical, and electrical durability. In detail, their optoelectrical properties are stable over 200 cycles of the scotch peel-off test, for 10 h sonication, up to 350 °C, under UV/O3 treatment for 100 min, in 10% HCl and 28% NH3 for 6 and 12 h, and at an electrical potential up to 14 V, respectively. These features make (CNF/AL)10@Al-AgNW TEs suitable as a durable high-performance transparent heater.

Colon Polyp Detection in Primary Health Care Institutions of Korea: Detection Rate and Issues with Following the Guidelines.

Background/Aims: There have been few multicenter studies on colonic polyps conducted by primary medical institutions. This study examined the detection rate of colonic polyps in primary health care institutions and the related factors while following the guidelines. Methods: The medical records of 14,029 patients who underwent colonoscopy between January-June 2020 at 40 primary medical institutions in Korea were analyzed. High-risk adenoma was defined as advanced adenoma, carcinoma, or ≥3 adenomas. Results: Most patients (71.2%) aged ≥50 years underwent re-colonoscopy within 5 years (51.3%) for diagnostic purposes (61.3%) in Korean primary medical institutions. The detection rates of colon polyps, adenoma, advanced adenoma, high-risk adenoma, and carcinoma was 59.9%, 38.9%, 5.9%, 11.4%, and 0.3% in all subjects and 59.8%, 37.5%, 8.5%, 12.9%, and 0.3% in average-risk patients, respectively. The incidences of adenoma in average-risk patients increased significantly with age (30s/40s/50s: 20.1%/29.4%/43% for adenoma, 4.4%/6.7%/10.3% for advanced adenoma, and 5.6%/9.5%/14.6% for high-risk adenoma; p<0.05). Before 50 years of age, high-risk adenoma was detected in 9.1% of patients in the first-time screening group, and the significant risk factors were being male and ≥40 years of age. The detection rate of high-risk adenoma in the normal index colonoscopy group within 5 years was 9.0%. The significant risk factors included older age, male sex, positive fecal occult blood test, stool form changes, and nonspecific symptoms (gas and indigestion). Conclusions: More colonic adenoma studies targeting real-world clinical practice will be needed to revise the Korean guidelines for colorectal cancer screening and surveillance.

Lateral Size Effect of Graphene Oxide on Its Surface-Enhanced Raman Scattering Property.

The lateral size effect of graphene oxide (GO) on surfaced-enhanced Raman scattering (SERS) property is systematically investigated by using size-fractionalized GO. For the size fractionalization without changes of chemical structure, large-sized GO (LGO) and small-sized GO (SGO) are separated from the as-synthesized GO (AGO) by centrifugation and membrane filtration, respectively. The size-fractionalized GO sheets are immobilized on a solid substrate for the parallel comparison of their SERS property. As a result, we find that LGO shows considerably higher SERS property than SGO for typical Raman probes such as rhodamine 6G and crystal violet. Furthermore, the lateral size effect of GO derivatives is consistently observed when they are hybridized with plasmonic silver nanoparticles. These results indicate that LGO is superior to AGO and SGO as a SERS platform, and it is also quantitatively confirmed by calculating their enhancement factor.

Resveratrol-ß-Lactoglobulin Composite Nanocoating by Layer-by-Layer Assembly with Fe(III)-Tannic Acid Complex.

Resveratrol (3,4',5-trihydroxystilbene) is beneficial to human health due to its diverse biological activities including its anti-inflammatory and anti-oxidative effects as confirmed by pharmacokinetic tests. Despite these clinical merits, resveratrol's limited hydrosolubility and chemical vulnerability remain challenging with regard to developing a controlled delivery system with enhanced bioavailability. In this work, we report a resveratrol-ß-lactoglobulin (R-BLG) composite nanocoating through a layer-by-layer assembly with Fe(III)-tannic acid nanofilms. The R-BLG composite nanocoating can be formed in planar and particulate substrates, showing excellent film stability under a broad range of pH values and against enzymatic digestion during a weeklong incubation. We envision that the proteinaceous nanocoating herein could be combined with existing pharmaceutical carrier materials (e. g., microcapsules and nanoparticles) to realize advanced drug delivery systems with an expanded repertoire of hydrophobic drugs.

7,7-Dimethyl-9-(10-phenylanthracen-9-yl)-7H-Benzo[b] Fluoreno[3,4-d]Thiophene Derivatives for Blue Fluorescent Organic Light-Emitting Diodes.

In this study, we designed and synthesized two blue fluorescence materials using 7,7-dimethyl-9-(10-phenylanthracen-9-yl)-7H-benzo[b]fluoreno[3,4-d]thiophene substituted anthracene derivatives. To characterize their electroluminescent properties, we fabricated the OLED devices using these two emitting materials. Particularly, a device using 7,7-dimethyl-9-(10-phenylanthracen-9-yl)-7Hbenzo[ b]fluoreno[3,4-d]thiophene showed maximum values of luminous efficiency, power efficiency, and external quantum efficiency of 2.42 cd/A, 1.48 lm/W, 3.08% at 20 mA/cm2, respectively with CIE (x, y) coordinates of (0.15, 0.09) at 8.0 V.

Highly Efficient 7,7-Dimethyl-9-(10-phenylanthracen-9-yl)-7H-Benzo[6,7]Indeno[1,2-f]Quinoline Derivatives for Blue Fluorescent Organic Light-Emitting Diodes.

Highly efficient blue fluorescent 7,7-dimethyl-9-(10-phenylanthracen-9-yl)-7H-benzo[6,7]indeno[1,2- f]quinoline derivatives, based on benzo-indeno-quinoline and phenylanthracene were designed and synthesized. To test their electroluminescent properties, organic light-emitting diodes (OLEDs) were fabricated with the configuration of indium-tin-oxide (ITO) (150 nm)/4,4',4″-Tris[2- naphthyl(phenyl)amino]triphenylamine (2-TNATA) (30 nm)/N,N'-di(1-naphthyl)-N,N'-diphenyl-1,1'- biphenyl)4,4'-diamine (NPB) (20 nm)/blue emitting materials (20 nm)/bathophenanthroline (Bphen) (30 nm)/Liq (2 nm)/Al (100 nm). The devices using these blue materials as emitters showed efficient blue emission. Particularly, a device employing 7,7-dimethyl-9-(10-phenylanthracen-9-yl)-7Hbenzo[ 6,7]indeno[1,2-f]quinoline as an emitting layer yielded the best performance with a luminous efficiency (LE), power efficiency (PE), and external quantum efficiency (EQE) and the Commission International de L'Eclairge (CIE) coordinates of 4.60 cd/A, 3.07 lm/W, 4.32% at 20 mA/cm², and (0.16, 0.12) at 8.0 V, respectively.

Graphene Oxide Derivatives and Their Nanohybrid Structures for Laser Desorption/Ionization Time-of-Flight Mass Spectrometry Analysis of Small Molecules.

Matrix-assisted laser desorption/ionization (MALDI) has been considered as one of the most powerful analytical tools for mass spectrometry (MS) analysis of large molecular weight compounds such as proteins, nucleic acids, and synthetic polymers thanks to its high sensitivity, high resolution, and compatibility with high-throughput analysis. Despite these advantages, MALDI cannot be applied to MS analysis of small molecular weight compounds (<500 Da) because of the matrix interference in low mass region. Therefore, numerous efforts have been devoted to solving this issue by using metal, semiconductor, and carbon nanomaterials for MALDI time-of-flight MS (MALDI-TOF-MS) analysis instead of organic matrices. Among those nanomaterials, graphene oxide (GO) is of particular interest considering its unique and highly tunable chemical structures composed of the segregated sp2 carbon domains surrounded by sp3 carbon matrix. Chemical modification of GO can precisely tune its physicochemical properties, and it can be readily incorporated with other functional nanomaterials. In this review, the advances of GO derivatives and their nanohybrid structures as alternatives to organic matrices are summarized to demonstrate their potential and practical aspect for MALDI-TOF-MS analysis of small molecules.

Polyacrylonitrile-based carbon nanofibers as a matrix for laser desorption/ionization time-of-flight mass spectrometric analysis of small molecules under both positive and negative ionization modes.

Carbon fiber (CNF), prepared by carbonization of electrospun polyacrylonitrile (PAN) fibers, is systematically investigated as a mediator to replace conventional organic matrices for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-MS). CNF exhibits a high salt tolerance, sensitivity, and resolution for organic matrix-free laser desorption/ionization time-of-flight mass spectrometry (LDI-MS) analysis of various analytes under both positive and negative ionization modes. Especially, saccharides, a neutral molecule having low negative ionization efficiency, are successfully detected with CNF. Taken together, this study clearly demonstrates CNF is a promising material to develop an efficient and universal platform for LDI-MS analysis regardless of preferential ionization modes of analytes. Graphical abstract.

Analysis of the effect of organic solvent-sheet interfacial interaction on the exfoliation of sulfur-doped reduced graphene oxide sheets in a solvent system using molecular dynamics simulations.

In this study, the effect of interfacial interaction between solvent and sheets on the exfoliation of sulfur-doped reduced graphene oxide (SrGO) sheets was studied, using molecular dynamics simulations. Four organic solvents of toluene, tetrahydrofuran, N-methyl-2-pyrrolidone, and sulfolane, were used in this simulation. An insertion simulation considering the size effect of insertion molecules was used to determine the insertion efficiency of the solvent molecules. The insertion efficiency of toluene was the best among the four solvents due to the influence of the effective thickness of the solvent. An exfoliation simulation considering electrostatic interaction was conducted to evaluate the exfoliation efficiency of the SrGO sheets. Unlike the insertion efficiency case, the sulfolane was found to have the best exfoliation efficiency among the four solvents, due to the strong electrostatic repulsion and weak attractive energy between the SrGO sheets. The exfoliation efficiency of the SrGO sheets was improved by increasing the sulfur content and the ratio of the thiol type to the total number of sulfur-doped groups. These results reveal that decreasing the attractive energy and increasing the electrostatic repulsion between the solvent and SrGO sheets are a useful way to improve the exfoliation efficiency of SrGO sheets.