Dynamic Hyperspectral Holography Enabled by Inverse-Designed Metasurfaces with Oblique Helicoidal Cholesterics.

Metasurfaces are flat arrays of nanostructures that allow exquisite control of phase and amplitude of incident light. Although metasurfaces offer new active element for both fundamental science and applications, the challenge still remains to overcome their low information capacity and passive nature. Here, by integrating an inverse-designed-metasurface with oblique helicoidal cholesteric liquid crystal (ChOH ), simultaneous spatial and spectral tunable metasurfaces with a high information capacity for dynamic hyperspectral holography, are demonstrated. The inverse design facilitates a single-phase map encoding of ten independent holographic images at different wavelengths. ChOH provides precise spectral modulation with narrow bandwidth and wide tunable regime in response to programmed stimuli, thus enabling dynamic switching of the multicolor holography. The results provide simple and generalizable principles for the rational design of interactive metasurfaces that will find numerous applications, including security platform.

Development of the Korean construction job exposure matrix (KoConJEM) based on experts' judgment using the 60 consolidated occupations for construction workers.

BACKGROUND: This study was conducted as an effort to develop a Korean construction job exposure matrix (KoConJEM) based on 60 occupations recently consolidated by the construction workers mutual aid association for use by the construction industry. METHODS: The probability, intensity, and prevalence of exposure to 26 hazardous agents for 60 consolidated occupations were evaluated as binary (Yes/No) or four categories (1 to 4) by 30 industrial hygiene experts. The score for risk was calculated by multiplying the exposure intensity by the prevalence of exposure. Fleiss' kappa for each hazardous agent and occupation was used to determine agreement among the 30 experts. The JEM was expressed on a heatmap and a web-based dashboard to facilitate comparison of factors affecting exposure according to each occupation and hazardous agent. RESULTS: Awkward posture, heat/cold, heavy lifting, and noise were hazardous agents regarded as exposure is probable by at least one or more experts in all occupations, while exposure to asphalt fumes was considered hazardous in the smallest number of occupations (n = 5). Based on the degree of agreement among experts, more than half of the harmful factors and most occupations showed fair to good results. The highest risk value was 16 for awkward posture for most occupations other than safety officer. CONCLUSIONS: The KoConJEM provides information on the probability, intensity, and prevalence of exposure to harmful factors, including most occupations employing construction workers; therefore, it may be useful in the conduct of epidemiological studies on assessment of health risk for construction workers.

Nectar Characteristics and Honey Production Potential of Five Rapeseed Cultivars and Two Wildflower Species in South Korea.

The growing beekeeping industry in South Korea has led to the establishment of new honey plant complexes. However, studies on honey production from each species are limited. This study aimed to assess the honey production potential of various Brassica napus cultivars and two wildflower species. The nectar characteristics of B. napus varied significantly among the cultivars. Absolute sugar concentrations differed among the cultivars, but sugar composition ratios were similar. In contrast, the amino acid content remained relatively uniform regarding percentage values, irrespective of the absolute concentrations. Estimations of honey potential production per hectare (kg/ha) resulted in the following ranking among cultivars: 'JM7003' (107.1) > 'YS' (73.0) > 'JM7001' (63.7) > 'TL' (52.7) > 'TM' (42.4). The nectar volume of Pseudolysimachion rotundum var. subintegrum and Leonurus japonicus increased during the flowering stage. P. rotundum var. subintegrum was sucrose-rich and L. japonicus was sucrose-dominant. Both species predominantly contained phenylalanine, P. rotundum var. subintegrum had glutamine as the second most abundant amino acid, and L. japonicus had tyrosine. The honey production potential was 152.4 kg/ha for P. rotundum var. subintegrum and 151.3 kg/ha for L. japonicus. These findings provide a basis for identifying food resources for pollinators and selecting plant species to establish honey plant complexes.

Multivariate Analysis among Marker Compounds, Environmental Factors, and Fruit Quality of Schisandra chinensis at Different Locations in South Korea.

This study aimed to investigate the correlation among the contents of marker compounds, growth characteristics, and environmental factors of Schisandra chinensis fruits across South Korea. The fruits were collected from 36 cultivation sites in 28 regions across the country. We investigated nine growth characteristics, twelve soil physicochemical properties, eight meteorological data, and three marker compounds in this study. We optimized and validated an optimized method for quantifying marker compounds using UPLC and performed correlation analysis among the contents of marker compounds, growth characteristics, and environmental factors. The UPLC-UV method for analyzing marker compounds was validated by measuring linearity, LOD, LOQ, precision, and accuracy. The marker compounds were negatively correlated with the fruit size and sugar contents, and growth characteristics were negatively correlated with some physicochemical properties of the soil. The results of this study can be used as basic data for the standard cultural practices and quality control of S. chinensis fruits.

Occupational asthma related to indoor air pollution in a worker at an indoor air gun shooting range: a case report.

Background: Indoor air pollution can cause and exacerbate asthma. We report a previously undescribed case of occupational asthma related to indoor air pollution in a worker at an indoor air gun shooting range and highlight the potential risk of developing occupational asthma in this environment. Case presentation: A 31-year-old man presented with dyspnea, cough, and sputum and was diagnosed with asthma complicated by pneumonia. Objective evidence of asthma was obtained by performing a methacholine bronchial provocation test. It was suspected that the patient had occupational asthma, which began one month after changing jobs to work within the indoor air gun shooting range. The highest peak expiratory flow (PEF) diurnal variability on working days was 15%, but the highest variation was 24%, with 4 days out of 4 weeks having a variation of over 20% related to workplace exposure. Conversely, the diurnal variability on the rest days was 7%, and no day showed a variation exceeding 20%. The difference in the average PEF between working and rest days was 52 L/min. PEF deterioration during working days and improvement on rest days were noted. Conclusions: The results obtained from the in-depth analysis of the PEF were adequate to diagnose the patient with occupational asthma. Exposure to indoor air pollution and lead and the patient's atopy and allergic rhinitis may have contributed to the development of occupational asthma.

Incidence rates of injury, musculoskeletal, skin, pulmonary and chronic diseases among construction workers by classification of occupations in South Korea: a 1,027 subject-based cohort of the Korean Construction Worker's Cohort (KCWC).

Background: The objective of this study is to investigate the differences in incidence rates of targeted diseases by classification of occupations among construction workers in Korea. Methods: In a subject-based cohort of the Korean Construction Worker's Cohort, we surveyed a total of 1,027 construction workers. As occupational exposure, the classification of occupations was developed using two axes: construction business and job type. To analyze disease incidence, we linked survey data with National Health Insurance Service data. Eleven target disease categories with high prevalence or estimated work-relatedness among construction workers were evaluated in our study. The average incidence rates were calculated as cases per 1,000 person-years (PY). Results: Injury, poisoning, and certain other consequences of external causes had the highest incidence rate of 344.08 per 1,000 PY, followed by disease of the musculoskeletal system and connective tissue for 208.64 and diseases of the skin and subcutaneous tissue for 197.87 in our cohort. We especially found that chronic obstructive pulmonary disease was more common in construction painters, civil engineering welders, and civil engineering frame mold carpenters, asthma in construction painters, landscape, and construction water proofers, interstitial lung diseases in construction water proofers. Conclusions: This is the first study to systematically classify complex construction occupations in order to analyze occupational diseases in Korean construction workers. There were differences in disease incidences among construction workers based on the classification of occupations. It is necessary to develop customized occupational safety and health policies for high-risk occupations for each disease in the construction industry.

Bright-Field and Edge-Enhanced Imaging Using an Electrically Tunable Dual-Mode Metalens.

The imaging of microscopic biological samples faces numerous difficulties due to their small feature sizes and low-amplitude contrast. Metalenses have shown great promise in bioimaging as they have access to the complete complex information, which, alongside their extremely small and compact footprint and potential to integrate multiple functionalities into a single device, allow for miniaturized microscopy with exceptional features. Here, we design and experimentally realize a dual-mode metalens integrated with a liquid crystal cell that can be electrically switched between bright-field and edge-enhanced imaging on the millisecond scale. We combine the concepts of geometric and propagation phase to design the dual-mode metalens and physically encode the required phase profiles using hydrogenated amorphous silicon for operation at visible wavelengths. The two distinct metalens phase profiles include (1) a conventional hyperbolic metalens for bright-field imaging and (2) a spiral metalens with a topological charge of +1 for edge-enhanced imaging. We demonstrate the focusing and vortex generation ability of the metalens under different states of circular polarization and prove its use for biological imaging. This work proves a method for in vivo observation and monitoring of the cell response and drug screening within a compact form factor.

Epidemiology of occupational injuries in construction workers between 2009 and 2018 in South Korea.

BACKGROUND: This study aimed to investigate the characteristics of occupational injuries based on fatality, sex, and classification of occupations among construction workers using workers' compensation (WC) insurance data in South Korea. METHODS: We collected WC insurance data from the Korea Workers' Compensation & Welfare Service for all construction workers between 2009 and 2018. Data from 158,947 accepted claims for occupational injury were extracted, and the demographic features, occupational injury types, and annual trends were analyzed for fatal and nonfatal cases. The annual incidence and mortality trends of occupational injury were estimated using negative binomial regression and Poisson regression models, for injury incidence and mortality respectively. RESULTS: Among a total of 158,947 occupational injury cases, there were 155,772 (98%) nonfatal injuries and 3175 (2%) fatal injuries. For all occupational injuries, Construction Elementary Workers (6th Korean Standard Classification of Occupations (KSCO) 910; 45.7%) was the most frequent occupation, followed by Construction-Related Technical Workers (6th KSCO 772; 39.2%). The most frequent injury type was a fracture, followed by ruptures or lacerations and contusions. The incidence of all occupational injuries increased from 700.36 per 100,000 persons in 2009 to 1,195.98 per 100,000 persons in 2018. Further, deaths from injuries at work followed a significantly increasing annual trend [mortality rate ratio 1.04 (95% CI: 1.03-1.05)] from 2009 to 2018. CONCLUSION: The over two-thirds increased incidence of occupational injuries and significantly increasing mortality trends for occupational injuries during the last 10 years indicate the need for aggressive intervention in occupational safety and health management within the Korean construction industry.

Liquid Crystalline Systems from Nature and Interaction of Living Organisms with Liquid Crystals.

Biomaterials, which are substances interacting with biological systems, have been extensively explored to understand living organisms and obtain scientific inspiration (such as biomimetics). However, many aspects of biomaterials have yet to be fully understood. Because liquid crystalline phases are ubiquitously found in biomaterials (e.g., cholesterol, amphiphile, DNA, cellulose, bacteria), therefore, a wide range of research has made attempts to approach unresolved issues with the concept of liquid crystals (LCs). This review presents these studies that address the interactive correlation between biomaterials and LCs. Specifically, intrinsic LC behavior of various biomaterials such as DNA, cellulose nanocrystals, and bacteriaare first introduced. Second, the dynamics of bacteria in LC media are addressed, with focus on how bacteria interact with LCs, and how dynamics of bacteria can be controlled by exploiting the characteristics of LCs. Lastly, how the strong correlation between LCs and biomaterials has been leveraged to design a new class of biosensors with additional functionalities (e.g., self-regulated drug release) that are not available in previous systems is reviewed. Examples addressed in this review convey the message that the intersection between biomaterials and LCs offers deep insights into fundamental understanding of biomaterials, and provides resources for development of transformative technologies.

Approval status and characteristics of work-related musculoskeletal disorders among Korean workers in 2020.

Background: This study aimed to investigate the characteristics of work-related musculoskeletal disorders (WRMSDs) in occupational disease claims and identify patterns of WRMSDs for each body part by industry and occupation. Methods: This study analyzed the raw data of occupational disease claims for musculoskeletal disorders deliberated by the Occupational Disease Decision Committee of the Korea Workers' Compensation & Welfare Service in 2020. The data was classified into 6 body parts with the highest numbers of occupational disease cases by using the complete enumeration data on principal diagnoses and 4 types of subdiagnoses in the raw data. The characteristics and approval rates of WRMSDs by body part, industry and occupation were examined and summarized. Results: A total of 13,015 occupational disease cases for WRMSDs were classified, and lumbar spinal (back) diseases accounted for the largest proportion of claimed diseases, followed by shoulder, elbow, wrist, knee, and neck diseases in a descending order. The occupations with the highest and second highest numbers of occupational disease cases by body part were found to be automobile assemblers and production-related elementary workers for the neck, school meal service workers and cooks for the back, construction frame mold carpenters and school meal service workers for the shoulder, elementary workers in mining and food service workers for the elbow, food service workers and automobile parts assemblers for the wrist, and ship welders and school meal service workers for the knee. Conclusions: This study examined the characteristics and approval status of WRMSDs by body part and occupation. Based on the study results, management strategies for the prevention of WRMSDs should be established regarding occupations with a high risk of WRMSDs for each body part.

Relationship between of working hours, weekend work, and shift work and work-family conflicts among Korean manufacturers.

Background: In the manufacturing industry, work-family conflict (WFC) is related to working hour characteristics. Earlier studies on the relationship between working hour characteristics and WFC in the manufacturing industry have been limited to some regions in Korea. No study has addressed the data on a national scale. Thus, this study investigated the impact of weekly working hours, weekend work, and shift work on WFC using national-scale data. Methods: This study was based on the fifth Korean Working Conditions Survey of 5,432 manufacturers. WFC consists of 5 variables; WFC1 "kept worrying about work"; WFC2 "felt too tired after work"; WFC3 "work prevented time for family"; WFC4 "difficult to concentrate on work"; WFC5 "family responsibilities prevented time for work". As WFC refers to the inter-role conflict between the need for paid work and family work, WFC has been measured in two directions, work to family conflict (WTFC: WFC1, 2, 3) and family to work conflict (FTWC: WFC4, 5). With these WFC variables, we conducted multiple logistic analyses to study how working hours, weekend work, and shift work impact WFC. Results: Korean manufacturers' prolonged working hours increased all aspects of WFCs. Odds ratios (ORs) of WFCs based on working hours (reference of under 40 hours) of 41-52, 53-60, over 61 were 1.247, 1.611, 2.279 (WFC1); 1.111, 2.561, 6.442 (WFC2); 1.219, 3.495, 8.327 (WFC3); 1.076, 2.019, 2.656 (WFC4); and 1.166, 1.592, 1.946 (WFC5), respectively. Shift-work in the WFC2 model showed a significantly higher OR of 1.390. Weekend work 'only on Saturday' had significant ORs with WFC2 (1.323) and WFC3 (1.552). Conclusions: An increase in working hours leads to the spending of less time attending to problems between work and family, causing both WTFC and FTWC to increase. As weekends, evenings, and nighttime are considered to be family-friendly to people, working on weekends and shift-work were highly correlated to WTFC.

Chemical Pneumonitis Caused by the Inhalation of Zinc Oxide Fumes in an Arc Welder.

Acute respiratory illness caused by exposure to welding-associated zinc oxide fumes is known as metal fume fever (MFF). MFF is generally characterized as a self-limiting disease. Few studies have reported chemical pneumonitis associated with zinc fume inhalation. We report a case study involving severe episodes of MFF accompanied by chemical pneumonitis due to the inhalation of zinc oxide fumes while operating an arc welder. A 54-year-old man developed flu-like symptoms after arc welding galvanized steel in a poorly ventilated area. Despite intravenous antibiotics therapy, his clinical course worsened, and his urine zinc concentration was remarkably elevated (3579 µg/24 h; reference range, 0-616 µg/24 h). A chest computed tomography revealed extensive consolidation, ground-glass opacity in the lungs, and right pleural effusion. After corticosteroid treatment, the patient's symptoms and radiologic findings significantly improved. It should be noted that the inhalation of zinc oxide fumes can occasionally induce acute lung injury via inflammatory responses and oxidative stress.

Liquid crystal-powered Mie resonators for electrically tunable photorealistic color gradients and dark blacks.

Taking inspiration from beautiful colors in nature, structural colors produced from nanostructured metasurfaces have shown great promise as a platform for bright, highly saturated, and high-resolution colors. Both plasmonic and dielectric materials have been employed to produce static colors that fulfil the required criteria for high-performance color printing, however, for practical applications in dynamic situations, a form of tunability is desirable. Combinations of the additive color palette of red, green, and blue enable the expression of further colors beyond the three primary colors, while the simultaneous intensity modulation allows access to the full color gamut. Here, we demonstrate an electrically tunable metasurface that can represent saturated red, green, and blue pixels that can be dynamically and continuously controlled between on and off states using liquid crystals. We use this to experimentally realize ultrahigh-resolution color printing, active multicolor cryptographic applications, and tunable pixels toward high-performance full-color reflective displays.

Conformal quantum dot-SnO2 layers as electron transporters for efficient perovskite solar cells.

Improvements to perovskite solar cells (PSCs) have focused on increasing their power conversion efficiency (PCE) and operational stability and maintaining high performance upon scale-up to module sizes. We report that replacing the commonly used mesoporous-titanium dioxide electron transport layer (ETL) with a thin layer of polyacrylic acid-stabilized tin(IV) oxide quantum dots (paa-QD-SnO2) on the compact-titanium dioxide enhanced light capture and largely suppressed nonradiative recombination at the ETL-perovskite interface. The use of paa-QD-SnO2 as electron-selective contact enabled PSCs (0.08 square centimeters) with a PCE of 25.7% (certified 25.4%) and high operational stability and facilitated the scale-up of the PSCs to larger areas. PCEs of 23.3, 21.7, and 20.6% were achieved for PSCs with active areas of 1, 20, and 64 square centimeters, respectively.

Exposure to Nickel Oxide Nanoparticles Induces Acute and Chronic Inflammatory Responses in Rat Lungs and Perturbs the Lung Microbiome.

Nickel oxide nanoparticles (NiO NPs) are highly redox active nanoparticles. They can cause acute and chronic inflammation in rat lungs. Unlike the gut microbiome, the association between the lung microbiome's role and pulmonary inflammatory response to inhaled nanoparticles remains largely unexplored. We aimed to explore the interaction between the lung microbiome and inflammatory responses in rats exposed to NiO NPs. Thirty female Wistar rats were randomly categorized into control and low- (50 cm2/rat), and high- (150 cm2/rat) dose NiO NPs exposure groups. NiO NPs were intratracheally instilled, and cytological, biochemical, proinflammatory cytokine, and lung microbiome analyses of bronchoalveolar lavage fluid were performed at 1 day and 4 weeks after instillation. NiO NPs caused a neutrophilic and lymphocytic inflammatory response in rat lung. We demonstrated that exposure to NiO NPs can alter the lung microbial composition in rats. In particular, we found that more Burkholderiales are present in the NiO NPs exposure groups than in the control group at 1 day after instillation. Dysbiosis in the lung microbiome is thought to be associated with acute lung inflammation. We also suggested that Burkholderiales may be a key biomarker associated with lung neutrophilic inflammation after NiO NPs exposure.

Stimuli-Responsive Liquid Crystal Printheads for Spatial and Temporal Control of Polymerization.

Polymerization reactions triggered by stimuli play a pivotal role in materials science, with applications ranging from lithography to biomedicine to adaptive materials. However, the development of chemically triggered, stimuli-responsive systems that can confer spatial and temporal control on polymerization remains a challenge. Herein, chemical-stimuli-induced polymerization based on a liquid crystal (LC) printhead is presented. The LC responds to a local chemical stimulus at its aqueous interface, resulting in the ejection of initiator into the solution to trigger polymerization. Various LC printhead geometries are designed, allowing programming of: i) bulk solution polymerization, ii) synthesis of a thin surface-confined polymeric coating, iii) polymerization-induced self-assembly of block copolymers to form various nanostructures (sphere, worm-like, and vesicles), and iv) 3D polymeric structures printed according to local solution conditions. The approach is demonstrated using amphiphiles, multivalent ions, and biomolecules as stimuli.

Physiological and molecular responses of the Antarctic harpacticoid copepod Tigriopus kingsejongensis to salinity fluctuations - A multigenerational study.

Since Antarctica and the surrounding Southern Ocean are facing global climate change, biota inhabiting those coastal regions is now challenged by environmental fluctuations including coastal freshening. In this study, the effects of salinity range of 0-75 (practical salinity unit, PSU) on the Antarctic harpacticoid copepod Tigriopus kingsejongensis was investigated by measurement of 96 h survival rate, lifespan, and sex ratio with further analysis of multigenerational growth parameters and mRNA expressions under salinity of 15-45. Different stages of the copepods (i.e., nauplius, male, and female) generally showed tolerance to hypo- and hypersalinity, wherein female copepods were more tolerant than males when exposed to salinity fluctuations. Lifespan was significantly shortened by hypo- and hypersalinity compared to control salinity (34), but there was no significant difference in the sex ratio between salinity treatments. Multigenerational experiments across five generations revealed that exposure to salinities of 15 and 45 reduced body length compared to that in control salinity and the first generation of each salinity group. Our results provide evidence regarding T. kingsejongensis on their preferred salinity ranges, physiological limit to salinity fluctuations, and population dynamics in future salinity.

Interfacial Polyelectrolyte-Surfactant Complexes Regulate Escape of Microdroplets Elastically Trapped in Thermotropic Liquid Crystals.

Polyelectrolytes adsorbed at soft interfaces are used in contexts such as materials synthesis, stabilization of emulsions, and control of rheology. Here, we explore how polyelectrolyte adsorption to aqueous interfaces of thermotropic liquid crystals (LCs) influences surfactant-stabilized aqueous microdroplets that are elastically trapped within the LCs. We find that adsorption of poly(diallyldimethylammonium chloride) (PDDA) to the interface of a nematic phase of 4-cyano-4'-pentylbiphenyl (5CB) triggers the ejection of microdroplets decorated with sodium dodecylsulfate (SDS), consistent with an attractive electrical double layer interaction between the microdroplets and LC interface. The concentration of PDDA that triggers release of the microdroplets (millimolar), however, is three orders of magnitude higher than that which saturates the LC interfacial charge (micromolar). Observation of a transient reorientation of the LC during escape of microdroplets leads us to conclude that complexes of PDDA and SDS form at the LC interface and thereby regulate interfacial charge and microdroplet escape. Poly(sodium 4-styrenesulfonate) (PSS) also triggers escape of dodecyltrimethylammonium bromide (DTAB)-decorated aqueous microdroplets from 5CB with dynamics consistent with the formation of interfacial polyelectrolyte-surfactant complexes. In contrast to PDDA-SDS, however, we do not observe a transient reorientation of the LC when using PSS-DTAB, reflecting weak association of DTAB and PSS and slow kinetics of formation of PSS-DTAB complexes. Our results reveal the central role of polyelectrolyte-surfactant dynamics in regulating the escape of the microdroplets and, more broadly, that LCs offer the basis of a novel probe of the structure and properties of polyelectrolyte-surfactant complexes at interfaces. We demonstrate the utility of these new insights by triggering the ejection of microdroplets from LCs using peptide-polymer amphiphiles that switch their net charge upon being processed by enzymes. Overall, our results provide fresh insight into the formation of polyelectrolyte-surfactant complexes at aqueous-LC interfaces and new principles for the design of responsive soft matter.

Erratum: Asbestos exposure and autoantibody titers.

[This corrects the article e32 in vol. 32, PMID: 33072343.].