Medial Meniscus Posterior Root Tear: How Far Have We Come and What Remains?

Medial meniscus posterior root tears (MMRTs), defined as tears or avulsions that occur within 1 cm of the tibial attachment of the medial meniscus posterior root, lead to biomechanically detrimental knee conditions by creating a functionally meniscal-deficient status. Given their biomechanical significance, MMRTs have recently been gaining increasing interest. Accordingly, numerous studies have been conducted on the anatomy, biomechanics, clinical features, diagnosis, and treatment of MMRTs, and extensive knowledge has been accumulated. Although a consensus has not yet been reached on several issues, such as surgical indications, surgical techniques, and rehabilitation protocols, this article aimed to comprehensively review the current knowledge on MMRTs and to introduce the author's treatment strategies.

Photo-Patternable Quantum Dots/Siloxane Composite with Long-Term Stability for Quantum Dot Color Filters.

Incorporation of quantum dots (QDs) into color filters (CFs) are desired for less energy loss and wider viewing angle compared to a conventional display. However, aggregation and vulnerability to heat, moisture, and chemicals in the photo-patternable matrix are critical issues of the QD-CFs with high QDs concentration. Herein, we fabricated red (10 wt %) and green (20 wt %) QD-CFs using photolithography of QD/siloxane ink containing secondary thiol monomer. Ligand-exchanged QDs were chemically incorporated in methacrylate oligosiloxane resin. QD/siloxane composite showed superior stability under harsh heat and moisture (85 °C/5% RH and 85 °C/85% RH) conditions and chemicals (EtOH, HCl, and NaOH) compared to conventional QD/PR (commercial negative photoresist). QD-CFs (10 µm thick) effectively converted blue light emitted from LED chip into red and green light, and the obtained white PL through QD-CF showed wide color gamut, which was 108% relative to NTSC. From these advantages, QD/siloxane composite will be beneficial as color-conversion photoresists are to be used as color filters in liquid crystal displays, micro light-emitting diodes, and organic light-emitting diodes.

Exceptionally stable quantum dot/siloxane hybrid encapsulation material for white light-emitting diodes with a wide color gamut.

Herein, we report a luminescent light-emitting diode (LED) encapsulating material using a thermally curable quantum dot (QD)/siloxane hybrid (TSE-QD) color converter, which has superior long-term stability even at elevated temperatures, in high humidity, and in various chemicals. The TSE-QD is cured by a thermal-induced hydrosilylation reaction of an in situ sol-gel synthesized QD dispersed siloxane resin (QD/siloxane resin) without additional ligand-exchange processes. QDs are successfully encapsulated by highly condensed and linear structured siloxane networks with additional chemical linkages between the surface ligands of the QDs and organic functional groups of the siloxane matrix. Moreover, QDs are uniformly distributed within the siloxane matrix retaining their optical properties during the fabrication processes of the TSE-QD. The result is that the stability, as evaluated by the photoluminescence (PL) quantum yield (QY), is greatly improved under harsh conditions, for example, 120 °C/5% relative humidity (RH), ethanol and acetone for 30 days. Based on the exceptionally stable TSE-QD, we demonstrate a white LED using a blue LED chip directly encapsulated by a yellow emitting TSE-QD that shows excellent spectral stability, outstanding reliability at 85 °C/85% RH and a wide color gamut (116% of NTSC).

Two-Step-Enhanced Stability of Quantum Dots via Silica and Siloxane Encapsulation for the Long-Term Operation of Light-Emitting Diodes.

Despite innovative optical properties of quantum dots (QDs) for QDs-converted light-emitting diodes (QD-LEDs), the vulnerability of the QDs, against heat and moisture, has been a critical issue for commercialization and long-term use. To overcome the instabilities, we fabricated a thermally and photostable QDs-embedded silica/siloxane (S-QD/siloxane) film by embedding QDs in silica and siloxane encapsulation through a two-step sol-gel reaction. S-QDs were stably dispersed in the oligo-siloxane resin with even a QD concentration of 5 wt % without aggregation. The two-step physical barriers of silica and siloxane acted to decrease the toxicity of QDs and improve the stability against heat and moisture [85 °C/5% relative humidity (RH), 85 °C/85% RH, and 120 °C/5% RH], light (50 and 100 mA), and chemicals (ethanol, HCl, and NaOH). Our S-QD/siloxane film was applied as a color-conversion material on a blue LED chip without additional solidification and encapsulation processes for red and white QD-LEDs, exhibiting a wider color gamut (107% in CIE 1931) compared to NTSC. These enhancements indicate that our S-QD/siloxane film is a suitable material for long-term operation of QD-enhanced films and QD-LEDs in next-generation displays.

Transparent Urethane-Siloxane Hybrid Materials for Flexible Cover Windows with Ceramic-Like Strength, yet Polymer-Like Modulus.

Any transition toward an era of flexible electronics will have to overcome the mechanical limitations of materials. Specifically, the attainment of both strength and flexibility, which are generally mutually exclusive, is required including glass-like wear resistance, plastic-like compliance, and a high level of strain. Here, we fabricate a urethane-methacrylate-siloxane hybrid (UMSH) material. It is found that UMSH, with molecule-level hybridization of urethane linkage and methacrylate-siloxane conetworks, demonstrates ceramic-like high strength (574 MPa), yet polymer-like low modulus (8.42 GPa), and even high strain (6.3%) at fracture with excellent optical transparency. This combination of high strength, flexibility, and optical transparency indicates that this is a suitable material for glass substitution and can be used as a transparent flexible cover window for foldable display.

High-Performance and Simply-Synthesized Ladder-Like Structured Methacrylate Siloxane Hybrid Material for Flexible Hard Coating.

A high performance ladder-like structured methacrylate siloxane hybrid material (LMSH) was fabricated via simple hydrolytic sol⁻gel reaction, followed by free-radical polymerization. A structurally ordered siloxane backbone, the ladder-like structure, which is an essential factor for high performance, could be achieved by a short period of sol⁻gel reaction in only 4 h. This results in superior optical (Transmittance > 90% at 550 nm), thermal (T5 wt % decomposition > 400 ℃ ), mechanical properties(elastic recovery = 0.86, hardness = 0.6 GPa) compared to the random- and even commercialized cage-structured silsesquioxane, which also has ordered structure. It was investigated that the fabricated ladder-like structured MSH showed the highest overall density of organic/inorganic co-networks that are originated from highly ordered siloxane network, along with high conversion rate of polymerizable methacrylate groups. Our findings suggest a potential of the ladder-like structured MSH as a powerful alternative for the methacrylate polysilsesquioxane, which can be applied to thermally stable and flexible optical coatings, even with an easier and simpler preparation process.

Flexible Hard Coating: Glass-Like Wear Resistant, Yet Plastic-Like Compliant, Transparent Protective Coating for Foldable Displays.

A flexible hard coating for foldable displays is realized by the highly cross-linked siloxane hybrid using structure-property relationships in organic-inorganic hybridization. Glass-like wear resistance, plastic-like flexibility, and highly elastic resilience are demonstrated together with outstanding optical transparency. It provides a framework for the application of siloxane hybrids in protective hard coatings with high scratch resistance and flexibility for foldable displays.

Thermally Stable Siloxane Hybrid Matrix with Low Dielectric Loss for Copper-Clad Laminates for High-Frequency Applications.

We report vinyl-phenyl siloxane hybrid material (VPH) that can be used as a matrix for copper-clad laminates (CCLs) for high-frequency applications. The CCLs, with a VPH matrix fabricated via radical polymerization of resin blend consisting of sol-gel-derived linear vinyl oligosiloxane and bulky siloxane monomer, phenyltris(trimethylsiloxy)silane, achieve low dielectric constant (Dk) and dissipation factor (Df). The CCLs with the VPH matrix exhibit excellent dielectric performance (Dk = 2.75, Df = 0.0015 at 1 GHz) with stability in wide frequency range (1 MHz to 10 GHz) and at high temperature (up to 275 °C). Also, the VPH shows good flame resistance without any additives. These results suggest the potential of the VPH for use in high-speed IC boards.