Micro simulated moving bed chromatography-mass spectrometry as a continuous on-line process analytical tool.

Continuous manufacturing is becoming increasingly important in the (bio-)pharmaceutical industry, as more product can be produced in less time and at lower costs. In this context, there is a need for powerful continuous analytical tools. Many established off-line analytical methods, such as mass spectrometry (MS), are hardly considered for process analytical technology (PAT) applications in biopharmaceutical processes, as they are limited to at-line analysis due to the required sample preparation and the associated complexity, although they would provide a suitable technique for the assessment of a wide range of quality attributes. In this study, we investigated the applicability of a recently developed micro simulated moving bed chromatography system (µSMB) for continuous on-line sample preparation for MS. As a test case, we demonstrate the continuous on-line MS measurement of a protein solution (myoglobin) containing Tris buffer, which interferes with ESI-MS measurements, by continuously exchanging this buffer with a volatile ammonium acetate buffer suitable for MS measurements. The integration of the µSMB significantly increases MS sensitivity by removing over 98% of the buffer substances. Thus, this study demonstrates the feasibility of on-line µSMB-MS, providing a versatile PAT tool by combining the detection power of MS for various product attributes with all the advantages of continuous on-line analytics.

Ultrastrong Electron-Phonon Coupling in Uranium-Organic Frameworks Leading to Inverse Luminescence Temperature Dependence.

Electron-phonon interactions, crucial in condensed matter, are rarely seen in Metal-Organic Frameworks (MOFs). Detecting these interactions typically involves analyzing luminescence in lanthanide- or actinide-based compounds. Prior studies on Ln- and Ac-based MOFs at high temperatures revealed additional peaks, but these were too faint for thorough analysis. In our research, we fabricated a high-quality, crystalline uranium-based MOF (KIT-U-1) thin film using a layer-by-layer method. Under UV light, this film showed two distinct "hot bands," indicating a strong electron-phonon interaction. At 77 K, these bands were absent, but at 300 K, a new emission band appeared with half the intensity of the main luminescence. Surprisingly, a second hot band emerged above 320 K, deviating from previous findings in rare-earth compounds. We conducted a detailed ab-initio analysis employing time-dependent density functional theory to understand this unusual behaviour and to identify the lattice vibration responsible for the strong electron-phonon coupling. The KIT-U-1 film's hot-band emission was then utilized to create a highly sensitive, single-compound optical thermometer. This underscores the potential of high-quality MOF thin films in exploiting the unique luminescence of lanthanides and actinides for advanced applications.

3-Chloro-5-Substituted-1,2,4-Thiadiazoles (TDZs) as Selective and Efficient Protein Thiol Modifiers.

The study of cysteine modifications has gained much attention in recent years. This includes detailed investigations in the field of redox biology with focus on numerous redox derivatives like nitrosothiols, sulfenic acids, sulfinic acids and sulfonic acids resulting from increasing oxidation, S-lipidation, and perthiols. For these studies selective and rapid blocking of free protein thiols is required to prevent disulfide rearrangement. In our attempt to find new inhibitors of human histone deacetylase 8 (HDAC8) we discovered 5-sulfonyl and 5-sulfinyl substituted 1,2,4-thiadiazoles (TDZ), which surprisingly show an outstanding reactivity against thiols in aqueous solution. Encouraged by these observations we investigated the mechanism of action in detail and show that these compounds react more specifically and faster than commonly used N-ethyl maleimide, making them superior alternatives for efficient blocking of free thiols in proteins. We show that 5-sulfonyl-TDZ can be readily applied in commonly used biotin switch assays. Using the example of human HDAC8, we demonstrate that cysteine modification by a 5-sulfonyl-TDZ is easily measurable using quantitative HPLC/ESI-QTOF-MS/MS, and allows for the simultaneous measurement of the modification kinetics of seven solvent-accessible cysteines in HDAC8.

Purification of a Hydrophobic Elastin-Like Protein Toward Scale-Suitable Production of Biomaterials.

Elastin-like proteins (ELPs) are polypeptides with potential applications as renewable bio-based high-performance polymers, which undergo a stimulus-responsive reversible phase transition. The ELP investigated in this manuscript-ELP[V2Y-45]-promises fascinating mechanical properties in biomaterial applications. Purification process scalability and purification performance are important factors for the evaluation of potential industrial-scale production of ELPs. Salt-induced precipitation, inverse transition cycling (ITC), and immobilized metal ion affinity chromatography (IMAC) were assessed as purification protocols for a polyhistidine-tagged hydrophobic ELP showing low-temperature transition behavior. IMAC achieved a purity of 86% and the lowest nucleic acid contamination of all processes. Metal ion leakage did not propagate chemical modifications and could be successfully removed through size-exclusion chromatography. The simplest approach using a high-salt precipitation resulted in a 60% higher target molecule yield compared to both other approaches, with the drawback of a lower purity of 60% and higher nucleic acid contamination. An additional ITC purification led to the highest purity of 88% and high nucleic acid removal. However, expensive temperature-dependent centrifugation steps are required and aggregation effects even at low temperatures have to be considered for the investigated ELP. Therefore, ITC and IMAC are promising downstream processes for biomedical applications with scale-dependent economical costs to be considered, while salt-induced precipitation may be a fast and simple alternative for large-scale bio-based polymer production.

MOF-Hosted Enzymes for Continuous Flow Catalysis in Aqueous and Organic Solvents.

Fully exploiting the potential of enzymes in cell-free biocatalysis requires stabilization of the catalytically active proteins and their integration into efficient reactor systems. Although in recent years initial steps towards the immobilization of such biomolecules in metal-organic frameworks (MOFs) have been taken, these demonstrations have been limited to batch experiments and to aqueous conditions. Here we demonstrate a MOF-based continuous flow enzyme reactor system, with high productivity and stability, which is also suitable for organic solvents. Under aqueous conditions, the stability of the enzyme was increased 30-fold, and the space-time yield exceeded that obtained with other enzyme immobilization strategies by an order of magnitude. Importantly, the infiltration of the proteins into the MOF did not require additional functionalization, thus allowing for time- and cost-efficient fabrication of the biocatalysts using label-free enzymes.

Photoinduced Delamination of Metal-Organic Framework Thin Films by Spatioselective Generation of Reactive Oxygen Species.

Metal-organic frameworks (MOFs) built from different building units offer functionalities going far beyond gas storage and separation. In connection with advanced applications, e.g., in optoelectronics, hierarchical MOF-on-MOF structures fabricated using sophisticated methodologies have recently become particularly attractive. Here, we demonstrate that the structural complexity of MOF-based architectures can be further increased by employing highly spatioselective photochemistry. Using a layer-by-layer, quasi-epitaxial synthesis method, we realized a photoactive MOF-on-MOF hetero-bilayer consisting of a porphyrinic bottom layer and a tetraphenylethylene (TPE)-based top layer. Illumination of the monolithic thin film with visible light in the presence of oxygen gas results in the generation of reactive oxygen species (1O2) in the porphyrinic bottom layer, which lead to a photocleavage of the TPE units at the internal interface. We demonstrate that this spatioselective photochemistry can be utilized to delaminate the top layers, yielding two-dimensional (2D) MOF sheets with well-defined thickness. Experiments using atomic force microscopy (AFM) demonstrate that these platelets can be transferred onto other substrates, thus opening up the possibility of fabricating planar MOF structures using photolithography.

Fatal attraction of Caenorhabditis elegans to predatory fungi through 6-methyl-salicylic acid.

Salicylic acid is a phenolic phytohormone which controls plant growth and development. A methyl ester (MSA) derivative thereof is volatile and involved in plant-insect or plant-plant communication. Here we show that the nematode-trapping fungus Duddingtonia flagrans uses a methyl-salicylic acid isomer, 6-MSA as morphogen for spatiotemporal control of trap formation and as chemoattractant to lure Caenorhabditis elegans into fungal colonies. 6-MSA is the product of a polyketide synthase and an intermediate in the biosynthesis of arthrosporols. The polyketide synthase (ArtA), produces 6-MSA in hyphal tips, and is uncoupled from other enzymes required for the conversion of 6-MSA to arthrosporols, which are produced in older hyphae. 6-MSA and arthrosporols both block trap formation. The presence of nematodes inhibits 6-MSA and arthrosporol biosyntheses and thereby enables trap formation. 6-MSA and arthrosporols are thus morphogens with some functions similar to quorum-sensing molecules. We show that 6-MSA is important in interkingdom communication between fungi and nematodes.

Hemolysis Pathways during Storage of Erythrocytes and Inter-Donor Variability in Erythrocyte Morphology.

BACKGROUND: Red blood cells (RBCs) stored for transfusions can lyse over the course of the storage period. The lysis is traditionally assumed to occur via the formation of spiculated echinocyte forms, so that cells that appear smoother are assumed to have better storage quality. We investigate this hypothesis by comparing the morphological distribution to the hemolysis for samples from different donors. METHODS: Red cell concentrates were obtained from a regional blood bank quality control laboratory. Out of 636 units processed by the laboratory, we obtained 26 high hemolysis units and 24 low hemolysis units for assessment of RBC morphology. The association between the morphology and the hemolysis was tested with the Wilcoxon-Mann-Whitney U test. RESULTS: Samples with high stomatocyte counts (p = 0.0012) were associated with increased hemolysis, implying that cells can lyse via the formation of stomatocytes. CONCLUSION: RBCs can lyse without significant echinocyte formation. Lower degrees of spiculation are not a good indicator of low hemolysis when RBCs from different donors are compared.

Introducing electrical conductivity to metal-organic framework thin films by templated polymerization of methyl propiolate.

We herein present a case study on the templated, Pd-catalyzed polymerization reaction of methyl propiolate in the confined pore space of three different surface anchored metal-organic framework (SURMOF) systems in order to introduce electrical conductivity to MOF thin films and provide predictions for potential device integrations. To gain comprehensive insight into the influence of the template on polymerization, we chose Cu(bpdc), Cu2(bdc)2(dabco) and HKUST-1 because of their different types of pore channels, 1D, quasi-1D and 3D, and their free pore volumes. Well-defined MOF thin films were prepared using layer-by-layer deposition, which allows for the application of several characterization techniques not applicable for conventional powder MOFs. With SEM, AFM, XRD, MALDI-ToF/MS, ToF-SIMS and QCM, we were able to investigate the behaviour of the polymer formation. For lower dimensional pore channels, we find a depot-like release of monomeric units leading to top-layer formation determined by desorption kinetics, whereas for the 3D channels, quick release of an excess amount of monomers was observed and polymerization proceeds perfectly. Despite polymerization issues, control over the maximum chain lengths and the molecular weight distribution was achieved depending on the dimensionality of the pore systems. For the HKUST-1 system, polymerization was optimized and we were able to measure the electrical conductivity introduced by the conjugated polymer inside the channels.

Switching the Switch: Ligand Induced Disulfide Formation in HDAC8.

Human histone deacetylase 8 is a well-recognized target for T-cell lymphoma and particularly childhood neuroblastoma. PD-404,182 was shown to be a selective covalent inhibitor of HDAC8 that forms mixed disulfides with several cysteine residues and is also able to transform thiol groups to thiocyanates. Moreover, HDAC8 was shown to be regulated by a redox switch based on the reversible formation of a disulfide bond between cysteines Cys102 and Cys153 . This study on the distinct effects of PD-404,182 on HDAC8 reveals that this compound induces the dose-dependent formation of intramolecular disulfide bridges. Therefore, the inhibition mechanism of HDAC8 by PD-404,182 involves both, covalent modification of thiols as well as ligand mediated disulfide formation. Moreover, this study provides a deep molecular insight into the regulation mechanism of HDAC8 involving several cysteines with graduated capability to form reversible disulfide bridges.

Lipid ratios as a marker for red blood cell storage quality and as a possible explanation for donor gender differences in storage quality.

BACKGROUND AND OBJECTIVES: Red blood cells that are stored for transfusions as red cell concentrates (RCCs) undergo changes during the storage period, culminating in the lysis of the cells. The goal of this work is to find markers that are linked to high haemolysis, in order to explain the inter-donor variability that is known to occur in storage quality, and also the known differences between RCCs from male and female donors. MATERIALS AND METHODS: The relative amounts of lipids at the end of the storage period were compared for one group of low haemolysis samples (24 units, all ≤0·15% haemolysis), and one group of high haemolysis samples (26 units, all ≥0·5% haemolysis). Representative lipids were analysed from different lipid classes, including cholesterol, phosphatidylcholine, phosphatidylethanolamine, sphingomyelin and ceramide. Whole membrane preparations were analysed with one mass spectrometry technique, and lipid extracts were analysed with a second mass spectrometry technique. RESULTS: The ratio of palmitoyl-oleoyl phosphatidylcholine (POPC) to sphingomyelin was different for the high and low haemolysis groups (P = 0·0001) and for the RCCs from male and female donors (P = 0·0009). The ratio of cholesterol to phospholipids showed only minimal links to haemolysis. Higher relative amounts of sphingomyelin were associated with lower haemolysis, and higher relative amounts of ceramides were associated with increased haemolysis. CONCLUSION: The level of sphingomyelinase activity and the resulting ratio of sphingomyelin to POPC is proposed as a possible marker for RCC storage quality.

Alternaria alternata uses two siderophore systems for iron acquisition.

Iron is one of the most abundant elements on earth and essential for life. However, Fe3+ ions are rather insoluble and microorganisms such as fungi may use siderophores as strong chelators for uptake. In addition, free cytoplasmic iron is rather toxic and intracellular siderophores are used to control the toxicity. Siderophores are also important for iron storage. We studied two siderophore systems in the plant necrotrophic fungus Alternaria alternata and show that the non-ribosomal peptide synthase, Nps2, is required for the biosynthesis of intracellular ferricrocin, whereas Nps6 is needed for the formation of extracellular coprogen and coprogen B. Whereas nps2 was dispensable for growth on iron-depleted medium, nps6 was essential under those conditions. nps2 deletion caused an increase in spore formation and reduced pathogenicity on tomato. Our results suggest that A. alternata employs an external and an internal siderophore system to adapt to low iron conditions.

Ocean acidification has little effect on the biochemical composition of the coccolithophore Emiliania huxleyi.

Owing to the hierarchical organization of biology, from genomes over transcriptomes and proteomes down to metabolomes, there is continuous debate about the extent to which data and interpretations derived from one level, e.g. the transcriptome, are in agreement with other levels, e.g. the metabolome. Here, we tested the effect of ocean acidification (OA; 400 vs. 1000 µatm CO2) and its modulation by light intensity (50 vs. 300 µmol photons m-2 s-1) on the biomass composition (represented by 75 key metabolites) of diploid and haploid life-cycle stages of the coccolithophore Emiliania huxleyi (RCC1216 and RCC1217) and compared these data with interpretations from previous physiological and gene expression screenings. The metabolite patterns showed minor responses to OA in both life-cycle stages. Whereas previous gene expression analyses suggested that the observed increased biomass buildup derived from lipid and carbohydrate storage, this dataset suggests that OA slightly increases overall biomass of cells, but does not significantly alter their metabolite composition. Generally, light was shown to be a more dominant driver of metabolite composition than OA, increasing the relative abundances of amino acids, mannitol and storage lipids, and shifting pigment contents to accommodate increased irradiance levels. The diploid stage was shown to contain vastly more osmolytes and mannitol than the haploid stage, which in turn had a higher relative content of amino acids, especially aromatic ones. Besides the differences between the investigated cell types and the general effects on biomass buildup, our analyses indicate that OA imposes only negligible effects on E. huxleyi´s biomass composition.

Covalent inhibition of histone deacetylase 8 by 3,4-dihydro-2H-pyrimido[1,2-c][1,3]benzothiazin-6-imine.

BACKGROUND: HDAC8 is an established target for T-cell lymphoma and childhood neuroblastoma. Benzothiazine-imines are promising HDAC8 inhibitors with unknown binding mechanism lacking a usual zinc binding group. METHODS: In this study high-resolution and quantitative HPLC-coupled ESI-MS/MS techniques are combined with crystal structure determination and a variety of biochemical and computational methods to elucidate the reaction mechanism between benzothiazine-imine 1 and HDAC8. RESULTS: 1) 1 is a covalent inhibitor of HDAC8; 2) inhibition is reversible in the presence of reducing agents; 3) C153 in the active site and C102 are involved in the inhibition mechanism; 4) 1 modifies various cysteines in HDAC8 forming either thiocyanates or mixed disulfides with 3; 5) 1 and 5 dock in close proximity to C153 within the active site. This is supposed to accelerate covalent inactivation particularly in HDAC8 and suggested as major determinant for the observed nanomolar potency and selectivity of 1. CONCLUSIONS: 1 and its analogs are interesting model compounds but unsuitable for therapeutic treatment due to their high unselective reactivity towards thiol groups. However, the postulated preceding non-covalent binding mode of 1 opens a door to optimized next generation compounds that combine potent and selective non-covalent recognition with low reactivity towards C153 at the active site of HDAC8. GENERAL SIGNIFICANCE: 1 represents a completely new class of inhibitors for HDAC8. Initial non-covalent interaction at the bottom of the active site is suggested to be the key for its selectivity. Further optimization of non-covalent interaction and thiol-reactivity provides opportunities to develop therapeutic useful covalent HDAC8 inhibitors.

The Blood Bag Plasticizer Di-2-Ethylhexylphthalate Causes Red Blood Cells to Form Stomatocytes, Possibly by Inducing Lipid Flip-Flop.

BACKGROUND: During storage of red blood cell (RBC) concentrates, the plasticizer di-2-ethylhexylphthalate (DEHP) that keeps the blood bags soft leaches out and can be taken up by the RBCs. DEHP is known to be beneficial for the RBC storage quality, but the molecular mechanisms of the action are unknown. METHODS: Aqueous suspensions of DEHP were added to RBCs in buffer. The morphological effects were observed on RBCs from 5 donors. Flow cytometry with annexin A5 binding was used to measure the exposed phosphatidylserine. RESULTS: DEHP induced the formation of stomatocytes at concentrations as low as ng/ml, provided that the cell suspension was also sufficiently dilute. Some spherocytes, which were susceptible to lysis, were also formed; after lysis, RBC ghosts were seen to continue the transition to the cup-shaped stomatocyte form. Incubation with DEHP increased the exposed phosphatidylserine, an effect that was also observed in the presence of vanadate, which inhibits the ATP-dependent translocases that maintain the membrane's lipid asymmetry. CONCLUSIONS: DEHP can have an active effect on RBC shape, instead of just preventing the storage-related shape changes. The effect appears to be mediated by increased flip-flop of lipids between the leaflets of the RBC membrane.

Integrated Process for the Enzymatic Production of Fatty Acid Sugar Esters Completely Based on Lignocellulosic Substrates.

Lignocellulose can be converted sustainably to fuels, power and value-added chemicals like fatty acid esters. This study presents a concept for the first eco-friendly enzymatic synthesis of economically important fatty acid sugar esters based on lignocellulosic biomass. To achieve this, beech wood cellulose fiber hydrolysate was applied in three manners: as sugar component, as part of the deep eutectic solvent (DES) reaction system and as carbon source for the microbial production of the fatty acid component. These fatty acids were gained from single cell oil produced by the oleaginous yeast Cryptococcus curvatus cultivated with cellulose fiber hydrolysate as carbon source. Afterwards, an immobilized Candida antarctica lipase B was used as the biocatalyst in DES to esterify sugars with fatty acids. Properties of the DES were determined and synthesized sugar mono- and di-esters were identified and characterized using TLC, MS, and NMR. Using this approach, sugar esters were successfully synthesized which are 100% based on lignocellulosic biomass.

Enhancing Selectivity and Kinetics in Oxidative Photocyclization by Supramolecular Control.

Photochemical reactions typically proceed via multiple reaction pathways, yielding a variety of isomers and products. Enhancing the selectivity is challenging. Now, the potential of supramolecular control for oxidative photocyclization of a tetraarylethylene, containing a stereogenic -C=C- bond, is demonstrated. In solution, this photochemical reaction produces three constitutional isomers (substituted phenanthrenes), with slow kinetics. When the reactant is assembled into a crystalline framework, only one product forms with accelerated kinetics. Key to this selectivity enhancement is the integration into a surface grown metal-organic framework (SURMOF); the dramatic gain in selectivity is ascribed to the hindrance of the rotational freedom of the -C=C- double bond. The structure of the MOF is key; the corresponding reaction in the solid does not result in such a high increase in selectivity. A striking change of luminescence properties after photocyclization is observed.

Lipase-Catalyzed Synthesis of Sugar Esters in Honey and Agave Syrup.

Honey and agave syrup are high quality natural products and consist of more than 80% sugars. They are used as sweeteners, and are ingredients of cosmetics or medical ointments. Furthermore, both have low water content, are often liquid at room temperature and resemble some known sugar-based deep eutectic solvents (DES). Since it has been shown that it is possible to synthesize sugar esters in these DESs, in the current work honey or, as vegan alternative, agave syrup are used simultaneously as solvent and substrate for the enzymatic sugar ester production. For this purpose, important characteristics of the herein used honey and agave syrup were determined and compared with other available types. Subsequently, an enzymatic transesterification of four fatty acid vinyl esters was accomplished in ordinary honey and agave syrup. Notwithstanding of the high water content for transesterification reactions of the solvent, the successful sugar ester formation was proved by thin-layer chromatography (TLC) and compared to a sugar ester which was synthesized in a conventional DES. For a clear verification of the sugar esters, mass determinations by ESI-Q-ToF experiments and a NMR analysis were done. These environmentally friendly produced sugar esters have the potential to be used in cosmetics or pharmaceuticals, or to enhance their effectiveness.

Advantages of Hydrogel-Based 3D-Printed Enzyme Reactors and Their Limitations for Biocatalysis.

The development of process steps catalyzed by immobilized enzymes usually encompasses the screening of enzyme variants, as well as the optimization of immobilization protocols and process parameters. Direct immobilization of biocatalysts by physical entrapment into hydrogels can be applied to reduce the effort required for immobilization, as the enzyme-specific optimization of the immobilization procedure is omitted. Physical entrapment is applicable for purified enzymes as well as crude cell extracts. Therefore, it can be used to quickly assess and compare activities of immobilized enzymes. For the application in flow reactors, we developed 3D-printed hydrogel lattices for enzyme entrapment as well as matching housings, also manufactured by 3D-printing. Testing the resulting enzyme reactors for three different enzymes, namely alcohol dehydrogenase from Lactobacillus brevis, benzoylformate decarboxylase from Pseudomonas putida and ß-galactosidase from Aspergillus oryzae, and four different enzymatic reactions showed the broad applicability of the approach but also its limitations. The activity of the immobilized biocatalysts was measured in batch experiments and compared to the kinetics of the respective free enzymes in solution. This comparison yields an effectiveness factor, which is a key figure to describe the extent the immobilized catalyst is effectively utilized. For the examined systems the effectiveness factor ranged between 6 and 14% and decreased with increasing absolute activity of the entrapped enzymes due to mass transfer limitations. To test the suitability of the hydrogel lattices for continuous operation, they were inserted into 3D-printed reactor housings and operated at constant flow. Stable product formation could be monitored over a period of 72 h for all four enzymatic systems, including two reactions with redox cofactor regeneration. Comparing calculated and experimental conversion in the continuous setup, higher values of the effectiveness factor in batch experiments also hint at good performance in continuous flow. This can be used to optimize complex biocatalytic reactions on a small scale.