RESUMO
The solid electrolyte interphase (SEI) is the most critical yet least understood component to guarantee stable and safe operation of a Li-ion cell. Herein, the early stages of SEI formation in a typical LiPF6 and organic carbonate-based Li-ion electrolyte are explored by operando surface-enhanced Raman spectroscopy, on-line electrochemical mass spectrometry, and electrochemical quartz crystal microbalance. The electric double layer is directly observed to charge as Li+ solvated by ethylene carbonate (EC) progressively accumulates at the negatively charged electrode surface. Further negative polarization triggers SEI formation, as evidenced by H2 evolution and electrode mass deposition. Electrolyte impurities, HF and H2O, are reduced early and contribute in a multistep (electro)chemical process to an inorganic SEI layer rich in LiF and Li2CO3. This study is a model example of how a combination of highly surface-sensitive operando characterization techniques offers a step forward to understand interfacial phenomena in Li-ion batteries.
RESUMO
The interphase formation on carbon (C) anodes in LiPF6/EC + DEC Li-ion battery electrolyte is analyzed by combining operando electrochemical quartz crystal microbalance with dissipation monitoring (EQCM-D) with in situ online electrochemical mass spectrometry (OEMS). EQCM-D enables unique insights into the anode solid electrolyte interphase (SEI) mass/thickness, its viscoelastic properties, and changes of electrolyte viscosity during the initial formation cycles. The interphase in the pure electrolyte is relatively soft (G'SEI ≈ 0.2 MPa, ηSEI ≈ 10 mPa s) and changes its viscoelastic properties dynamically as a function of the electrode potential. With increasing electrolyte water content, the SEI becomes thicker and much more rigid. Doubly labeled D218O is added to the electrolyte in order to precisely track the reaction pathway of water at the anode by OEMS. In the first cycle between 2.6 and 1.7 V versus Li+/Li, water is reduced, and hydroxide ions initiate an autocatalytic hydrolysis of EC. With large amounts of water initially present in the electrolyte, most of the formed CO2 gas is scavenged by reactions with hydroxide and alkoxide ions, forming a thick, rigid, and Li2CO3-rich early interphase on the C anode. This layer alleviates the following electrolyte decomposition processes and slows the reduction of EC < 1 V versus Li+/Li.
RESUMO
An operando electrochemical quartz crystal microbalance with dissipation monitoring (EQCM-D) with simultaneous in situ electrochemical impedance spectroscopy (EIS) has been developed and applied to study the solid electrolyte interphase (SEI) formation on copper current collectors in Li ion batteries. The findings are backed by EIS simulations and complementary analytical techniques, such as online electrochemical mass spectrometry (OEMS) and X-ray photoelectron spectroscopy (XPS). The evolution of mass and the mechanical properties of the SEI are directly correlated to the electrode impedance. Electrolyte reduction at the anode carbon active material initiates dissolution, diffusion, and deposition of reaction side products throughout the cell and increases electrolyte viscosity and the ohmic cell resistance as a result. On Cu the reduction of CuO x and HF occurs at >1.5 V and forms an initial LiF-rich interphase while electrolyte solvent reduction at <0.8 V vs Li+/Li adds a second, less rigid layer on top. Both the shear storage modulus and viscosity of the SEI generally increase upon cycling but-along with the SEI Li+ diffusion coefficient-also respond reversibly to electrode potential, likely as a result of Li+/EC interfacial concentration changes. Combined EIS-EQCM-D provides unique prospects for further studies of the highly dynamic structure-function relationships of electrode interphases in Li ion batteries.