RESUMO
Hybrid Density Functional Theory (DFT) calculations for multiple conformers of the insertion reactions of a methylenecyclopropane into the Ti-C bond of two differently α-substituted titanaaziridines explain the experimentally observed differences in regioselectivity between catalytic hydroaminoalkylation reactions of methylenecyclopropanes with α-phenyl-substituted secondary amines and corresponding stoichiometric reactions of a methylenecyclopropane with titanaaziridines, which can only be achieved with α-unsubstituted titanaaziridines. In addition, the lack of reactivity of α-phenyl-substituted titanaaziridines as well as the diastereoselectivity of the catalytic and stoichiometric reactions can be understood.
RESUMO
Nanoporous gold (NPG) is characterized by a bicontinuous network of nanometer-sized metallic struts and interconnected pores formed spontaneously by oxidative dissolution of the less noble element from gold alloys. The resulting material exhibits decent catalytic activity for low-temperature, aerobic total as well as partial oxidation reactions, the oxidative coupling of methanol to methyl formate being the prototypical example. This review not only provides a critical discussion of ways to tune the morphology and composition of this material and its implication for catalysis and electrocatalysis, but will also exemplarily review the current mechanistic understanding of the partial oxidation of methanol using information from quantum chemical studies, model studies on single-crystal surfaces, gas phase catalysis, aerobic liquid phase oxidation, and electrocatalysis. In this respect, a particular focus will be on mechanistic aspects not well understood, yet. Apart from the mechanistic aspects of catalysis, best practice examples with respect to material preparation and characterization will be discussed. These can improve the reproducibility of the materials property such as the catalytic activity and selectivity as well as the scope of reactions being identified as the main challenges for a broader application of NPG in target-oriented organic synthesis.
RESUMO
The photocatalytic sulfoxidation on TiO2 discovered by Parrino et al. represents a new, interesting and lower energy route for the synthesis of sulfonic acids. Sulfonic acids are important precursors for dyes, detergents and drugs. In the commonly known industrial process, SO2 and a specific hydrocarbon are converted into sulfonic acids using high-energy UV light. In this reaction, SO2 is excited into a metastable triplet state (3SO2), which has the potential to activate a CH-bond of hydrocarbons and start a radical reaction cycle. By introducing TiO2 as a photocatalyst, it has been shown that visible light can be used for the synthesis. This offers the potential to be a cost-effective reaction approach for industrial use. However, experimental studies indicate that the initial excitation mechanism of SO2 on TiO2 is significantly different from the catalyst-free mechanism. Parrino et al. were able to reveal first evidence for the existence of a charge-transfer process from SO2 to the TiO2 surface by means of electrochemical experiments. First theoretical investigations from first principles were able to further substantiate the existence of a charge-transfer. However, to fully understand this mechanism, more accurate methods such as Time Dependent Density Functional Theory (TD-DFT) or ab initio multireference methods such as the Complete Active Space Self Consistent Field (CASSCF) method are required. Furthermore, after understanding the charge-transfer mechanism, the introduction of dopants into TiO2 can be investigated in order to possibly redshift the excitation energy. This might open the route to using lower energy light for the sulfoxidation of hydrocarbons on TiO2 as a new potential industrial reaction for the synthesis of sulfonic acids. In this work, we will study the initial step of the photocatalytic sulfoxidation of hydrocarbons using the TD-DFT and CASSCF methods by using a combined approach consisting of calculations with periodic boundary conditions and a newly constructed embedded cluster model. Furthermore, we will explore the effects of doping by introducing four heteroatoms (C, N, S, and Se) into the TiO2 surfaces anatase[101] and rutile[110] to find a possible enhancement of the photocatalytic reactivity by lowering the electronic excitation energy.
RESUMO
The reaction of the titanium imido complex 1b with 2-butyne leads to the formation of the titanium azadiene complex 2a at ambient temperature instead of yielding the archetypical [2 + 2] cycloaddition product (titanaazacyclobutene) which is usually obtained by combining titanium imido complexes and internal alkynes. The formation of 2a is presumably caused by an initial propargylic C(sp3)-H activation step and quantum chemical calculations suggest that the outcome of this unexpected reactivity is thermodynamically favored. The previously reported titanaazacyclobutene I (which is obtained by reacting 1b with 1-phenyl-1-propyne) undergoes a rearrangement reaction at elevated temperature to give the corresponding five-membered titanium azadiene complex 2b.
RESUMO
Knowledge of the structure of the electrical double layer in ionic liquids (IL) is crucial for their applications in electrochemical technologies. We report the synthesis and applicability of an imidazolium-based amphiphilic ionic liquid with a perdeuterated alkyl chain for studies of electric potential-dependent rearrangements, and changes in the microenvironment in a monolayer on a Au(111) surface. Electrochemical measurements show two states of the organization of ions on the electrode surface. In situ IR spectroscopy shows that the alkyl chains in imidazolium cations change their orientation depending on the adsorption state. The methylene-d2 stretching modes in the perdeuterated IL display a reversible, potential-dependent appearance of a new band. The presence of this mode also depends on the anion in the IL. Supported by quantum chemical calculations, this new mode is assigned to a second νas (CD2 ) band in alkyl-chain fragments embedded in a polar environment of the anions/solvent present in the vicinity of the imidazolium cation and electrode. It is a measure of the potential-dependent segregation between polar and nonpolar environments in the layers of an IL closest to the electrode.
RESUMO
Multinuclear transition metal complexes bridged by ligands with extended π-electronic systems show a variety of complex electronic transitions and electron transfer reactions. While a systematic understanding of the photochemistry and electrochemistry has been attained for binuclear complexes, much less is known about trinuclear complexes such as hexaphenyl-5,6,11,12,17,18-hexaazatrinaphthylene-tristitanocene [(Cp2 Ti)3 HATN(Ph)6 ]. The voltammogram of [(Cp2 Ti)3 HATN(Ph)6 ] shows six oxidation and three reduction waves. Solution spectra of [(Cp2 Ti)3 HATN(Ph)6 ] and of the electrochemically formed oxidation products show electronic transitions in the UV, visible and the NIR ranges. Density functional theory (DFT) and linear response time-dependent DFT show that the three formally titanium(II) centers transfer an electron to the HATN ligand in the ground state. The optically excited transitions occur exclusively between ligand-centered orbitals. The charged titanium centers only provide an electrostatic frame to the extended π-electronic system. Complete active self-consistent field (CASSCF) calculation on a structurally simplified model compound, which considers the multi-reference character imposed by the three titanium centers, can provide an interpretation of the experimentally observed temperature-dependent magnetic behavior of the different redox states of the title compound in full consistency with the interpretation of the electronic spectra.
RESUMO
In this work we investigate the mechanism of photodesorption of water from a WO3(001) surface by theoretical calculations, applying an embedded cluster model. Using the CASSCF method, we have calculated both the ground state as well as the energetically preferred charge-transfer state in three degrees of freedom of the water molecule on the surface. The calculated potential energy surfaces were afterwards fitted with a neural network optimized by a genetic algorithm. A final quantum dynamic wave packet study provided insight into the photodesorption mechanism.
RESUMO
Introducing spectator molecules to the surface of supported noble metal nanoparticles is an innovative approach to improve the selectivity of heterogeneous catalysts. Colloidal synthesis of the nanoparticles allows researchers to select the spectator and the nanoparticle size, as well as the subsequent particle loading on different supports under well-defined conditions. However, understanding the interplay of the various effects that spectators can have on the catalytic properties of metal surfaces still requires further development. In this work, dodecylamine (DDA) is used to develop insights into the influence of spectator species on the chemical properties of 1.4-3.7 nm colloidal Pt nanoparticles on different supports (powders of Al2O3, ZnO, and TiO2). DDA deposition results in two chemically distinct spectator species on the Pt surface depending on temperature, as evidenced from X-ray photoelectron spectroscopy (XPS). DDA selectively blocks terrace sites on the Pt nanoparticles at room temperature, as apparent from diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) with CO as a surface-sensitive probe molecule. The electron donor effect of the amine group in DDA influences the electron densities of the accessible lower coordinated, reactive Pt adsorption sites as indicated from spectral shifts in DRIFTS and XPS. Furthermore, DDA suppresses CO-induced surface reconstruction of the Pt surface and metal-support interactions, although these effects depend on temperature and support composition. Therefore, spectators may be used to adjust the nature of metal nanoparticle-oxidic support interactions. The experimental findings and mechanistic explanations are supported by density functional theory calculations. These results may build a platform in understanding the fundamental properties of amine spectators in Pt-based catalysis, activating specific sites, enhancing site selectivity, acting as sensors, and directing the metal-support interaction.
RESUMO
Invited for the cover of this issue are Elad Gross, F.â Dean Toste, and co-workers at The Hebrew University and UC Berkeley. The image depicts the flexible anchoring geometry of addressable carbene molecules on Au surface, which upon exposure to reducing conditions changed their orientation from a standing into a flat-lying position. Read the full text of the article at 10.1002/chem.201903434.
RESUMO
Derivatives of 2,5-diaminoterephthalate (DAT) are efficient fluorescence dyes that are also redox-active, thus allowing for the electrochemical manipulation of spectral properties. The electrochemical behaviour of seven DAT derivatives was studied by cyclic voltammetry in dichloromethane. In the absence of a proton donor, DATs should be oxidized in two one-electron steps. The first step is usually quasi-reversible while the second step is either quasi-reversible or irreversible. Some electrochemical properties such as the formal potentials and the ratio between the anodic and the cathodic current were determined from the cyclic voltammograms. Correlation between the formal potential of first oxidation and the absorption or the fluorescence emission wavelengths are established for this specific type of dyes. These correlations were confirmed with density functional theory calculations.
RESUMO
The development of chemically addressable N-heterocyclic carbene (NHC) based self-assembled monolayers (SAMs) requires in-depth understanding of the influence of NHC's anchoring geometry on its chemical functionality. Herein, it is demonstrated that the chemical reactivity of surface-anchored NO2-functionalized NHCs (NO2-NHCs) can be tuned by modifying the distance between the functional group and the reactive surface, which is governed by the deposition technique. Liquid deposition of NO2-NHCs on Pt(111) induced a SAM in which the NO2-aryl groups were flat-lying on the surface. The high proximity between the NO2 groups and the Pt surface led to high reactivity, and 85% of the NO2 groups were reduced at room temperature. Lower reactivity was obtained with vapor-deposited NO2-NHCs that assumed a preferred upright geometry. The separation between the NO2 groups in the vapor-deposited NO2-NHCs and the reactive surface circumvented their surface-induced reduction, which was facilitated only after exposure to harsher reducing conditions.
RESUMO
The formation of flexible self-assembled monolayers (SAMs) in which an external trigger modifies the geometry of surface-anchored molecules is essential for the development of functional materials with tunable properties. In this work, it is demonstrated that NO2 -functionalized N-heterocyclic carbene molecules (NHCs), which were anchored on Au (111) surface, change their orientation from tilted into flat-lying position following trigger-induced reduction of their nitro groups. DFT calculations identified that the energetic driving force for reorientation was the lower steric hindrance and stronger interactions between the chemically reduced NHCs and the Au surface. The trigger-induced changes in the NHCs' anchoring geometry and chemical functionality modified the work function and the hydrophobicity of the NHC-decorated Au surface, demonstrating the impact of a chemically tunable NHC-based SAM on the properties of the metal surface.
RESUMO
We investigated methanol oxidation, decomposition and carbonylation reactions on a high indexed Pt(321) surface. Adsorption studies of the reactants and reaction products were analyzed, where the favourable binding was found on the low coordinated atoms which are located on the step edges of this surface. The dependence of the reaction mechanism on the surface structure could be observed by analysis of methanol decomposition via O-H and C-H bond cleavage, where the latter showed a significant preference in energy. Compared to flat surfaces, the stepped and kinked Pt(321) surface showed a much stronger adsorption behavior towards methanol decomposition exhibiting small activation barriers. The consideration of higher coverage of molecules, e.g. water, during the decomposition reaction showed significant reduction of the corresponding activation barriers. Finally, the influence of a second metal such as Au or Pd in the Pt(321) surface reduced the CO poisoning of the reactive steps and kinks by the formation of carbon dioxide resulting in the accessibility of the reactive surface atoms for next/further reaction steps.
RESUMO
The α-alkylation of amines with alkenes catalyzed by early transition-metal complexes represents an efficient and atom economic method for the synthesis of functionalized amines from simple and easily available starting materials. While the successful use of secondary amines, such as dimethylamine, strongly underlines the enormous industrial potential of this reaction, the analogous intermolecular α-alkylation of primary amines, especially methylamine, remains an unsolved synthetic task to this day. Based on calculated thermodynamic data, these experimental findings can now be explained for the first time, whereby several competing reactions, which are explained in detail, are of crucial importance for the different behavior of primary and secondary amines.
RESUMO
The focus of this study lies in the activation of molecular oxygen and reaction with CO within density functional theory (DFT) and high level CCSD(T) calculations. Therefore, we use M13 and M55 nanoparticles (NPs) and periodic M(321) surfaces as model systems and compare the catalytic activity of gold substrates to Ag and Cu based NP catalysts. In the first step, the adsorption energies of CO were compared for nanoparticles of different sizes for Au, Ag and Cu. The adsorption energies on M(321) and M55 NPs (M = Au, Ag, Cu) are virtually identical. For smaller M13 NPs the adsorption energies differ by â¼0.2 eV for Ag, â¼0.4 eV for Au, and â¼0.6 eV for Cu at the PBE level of theory. This can be explained by size effects, as the M13 NPs show a more molecule-like character. Presumably, CO binds more strongly to these very small NPs at the PBE level of theory. However, a benchmark calculation in the framework of CCSD(T)-theory reveals an adsorption energy of CO on Au13 of -0.88 eV, comparable to the adsorption energies calculated at the PBE level for Au55 and Au(321). For Au55, the adsorption energy calculated at the CCSD(T) level is -0.85 eV. This is in perfect agreement with the PBE result. In addition to adsorption energies, dissociation barriers have been calculated on M(321) surfaces. The dissociation energies of O2 on coinage metal catalysts are high, so that direct CO-oxidation reactions with molecular oxygen should be the dominant reaction mechanism compared to the dissociation and reaction of CO and atomic oxygen at least for silver and copper catalysts.
RESUMO
The reaction of bis(η5 :η1 -pentafulvene)titanium complexes with an allylidenephosphorylide Ph3 P=C(H)- C(H)=CH2 leads to binuclear zigzag hexapentaene titanium complexes (Ti2a, Ti2b). The formation of the central C6 H4 unit can be described as a spontaneous double C-H bond activation process, leading to an R3 P=C=C=CH2 intermediate, as a synthon for a titanabutatriene fragment [(CpR )2 Ti=C=C=CH2 ] (R: 2-adamantyl, CH(p-tol)2 ). In a subsequent dimerization Ti2a and Ti2b are formed, proofed by single-crystal X-ray diffraction and NMR measurements. The reaction sequence is confirmed by DFT calculations.
RESUMO
Designing efficient algorithms to apply highly accurate pair correlation methods to large molecules of scientific interest has remained an important field of research for a long period of time. We present a new approach toward fast algorithms, which represents an interesting alternative and extension to currently existing methods. The presented new contraction scheme saves a significant amount of memory and can be easily combined with efficient linear scaling algorithms. Additionally, the extension to orbital optimization and explicitly correlated f12-theory is demonstrated to further improve accuracy and applicablility.
RESUMO
The development of hybrid organic-inorganic perovskite solar cells is one of the most rapidly growing fields in the photovoltaic community and is on its way to challenge polycrystalline silicon and thin film technologies. High power conversion efficiencies can be achieved by simple processing with low cost. However, due to the limited long-term stability and environmental toxicity of lead in the prototypic CH3NH3PbI3, there is a need to find alternative ABX3 constitutional combinations in order to promote commercialization. The Goldschmidt tolerance factor and the octahedral factor were found to be necessary geometrical concepts to evaluate which perovskite compounds can be formed. It was figured out that the main challenge lies in estimating an effective ionic radius for the molecular cation. We calculated tolerance factors and octahedral factors for 486 ABX3 monoammonium-metal-halide combinations, where the steric size of the molecular cation in the A-position was estimated concerning the total charge density. A thorough inquiry about existing mixed organic-inorganic perovskites was undertaken. Our results are in excellent agreement with the reported hybrid compounds and indicate the potential existence of 106 ABX3 combinations hitherto not discussed in the literature, giving hints for more intense research on prospective individual candidates.
RESUMO
The S6 O192- ion was obtained both as rubidium and ammonium salt from the reaction of the respective sulfate with SO3 . It is the largest polysulfate ion known to date and exhibits a chain of six vertex-connected [SO4 ] tetrahedra. The unique compound was comprehensively characterized and the bonding within the anion was elucidated by theoretical investigations.
RESUMO
The reaction of Na2 SO4 and K2 SO4 with fuming sulfuric acid (65 % SO3 ) yielded colorless extremely sensitive crystals of Na[HS3 O10 ] (monoclinic; P21 /n (No.â 14); Z=4; a=707.36(2), b=1378.56(4), c=848.10(3)â pm; ß=94.817(1)°; V=824.09(4)â 106 â pm3 ) and K[HS3 O10 ] (orthorhombic; Pccn (No.â 56); Z=4; a=1057.16(3), b=807.81(2), c=897.57(2)â pm; V=766.51(3)â 106 â pm3 ). The analogous rubidium compound Rb[HS3 O10 ] (orthorhombic; Pnma (No.â 62); Z=4; a=891.43(3), b=1095.34(4), c=839.37(3) pm; V=819.58(5)â 106 â pm3 ) originates from the reaction of Rb2 CO3 and SO3 . All of the different structures contain the hitherto unknown anion [HS3 O10 ]- and are stamped by strong hydrogen bonds linking the anions either to dimers or chains. Theoretical investigations by DFT methods give further insight in the structural characteristics of [HS3 O10 ]- . The preparation of the [HS3 O10 ]- anion can be seen as an important milestone on our way to the still elusive polysulfuric acids.