Improving gonorrhoea molecular diagnostics: Genome mining-based identification of identical multi-repeat sequences (IMRS) in Neisseria gonorrhoeae.

Background: Curable sexually transmitted infections (STIs), such as Neisseria gonorrhoeae (N. gonorrhoeae), are a major cause of poor pregnancy outcomes. The infection is often asymptomatic in pregnant women, and a syndrome-based approach of testing leads to a missed diagnosis. Culture followed by microscopy is inadequate and time-consuming. The gold standard nucleic acid amplification tests require advanced infrastructure settings, whereas point-of-care tests are limited to immunoassays with sensitivities and specificities insufficient to accurately diagnose asymptomatic cases. This necessitates the development and validation of assays that are fit for purpose. Methods: We identified new diagnostic target biomarker regions for N. gonorrhoeae using an algorithm for genome mining of identical multi-repeat sequences (IMRS). These were then developed as DNA amplification primers to design better diagnostic assays. To test the primer pair, genomic DNA was 10-fold serially diluted (100 pg/µL to 1 × 10-3 pg/µL) and used as DNA template for PCR reactions. The gold standard PCR using 16S rRNA primers was also run as a comparative test, and both assay products were resolved on 1% agarose gel. Results: Our newly developed N. gonorrhoeae IMRS-PCR assay had an analytical sensitivity of 6 fg/µL representing better sensitivity than the 16S rRNA PCR assay with an analytical sensitivity of 4.3096 pg/µL. The assay was also successfully validated using clinical urethral swab samples. We further advanced this technique by developing an isothermal IMRS, which was both reliable and sensitive for detecting cultured N. gonorrhoeae isolates at a concentration of 38 ng/µL. Combining isothermal IMRS with a low-cost lateral flow assay, we were able to detect N. gonorrhoeae amplicons at a starting concentration of 100 pg/µL. Conclusion: Therefore, there is a potential to implement this concept within miniaturized, isothermal, microfluidic platforms, and laboratory-on-a-chip diagnostic devices for highly reliable point-of-care testing.

Recent advances in gold electrode fabrication for low-resource setting biosensing.

Gold electrodes are some of the most prevalent electrochemical biosensor substrate materials because they are readily functionalized with thiolated biomolecules. Yet, conventional methods to fabricate gold electrodes are costly and require onerous equipment, precluding them from implementation in low-resource settings (LRS). Recently, a number of alternative gold electrode fabrication methods have been developed to simplify and lower the cost of manufacturing. These methods include screen and inkjet printing as well as physical fabrication with common materials such as wire or gold leaf. All electrodes generated with these methods have successfully been functionalized with thiolated molecules, demonstrating their suitability for use in biosensors. Here, we detail recent advances in the fabrication, characterization and functionalization of these next-generation gold electrodes, with an emphasis on comparisons between cost and complexity with traditional cleanroom fabrication. We highlight gold leaf electrodes for their potential in LRS. This class of electrodes is anticipated to be broadly applicable beyond LRS due to their numerous inherent advantages.

Early Introduction and Rise of the Omicron Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) Variant in Highly Vaccinated University Populations.

BACKGROUND: The Omicron variant of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is highly transmissible in vaccinated and unvaccinated populations. The dynamics that govern its establishment and propensity toward fixation (reaching 100% frequency in the SARS-CoV-2 population) in communities remain unknown. Here, we describe the dynamics of Omicron at 3 institutions of higher education (IHEs) in the greater Boston area. METHODS: We use diagnostic and variant-specifying molecular assays and epidemiological analytical approaches to describe the rapid dominance of Omicron following its introduction into 3 IHEs with asymptomatic surveillance programs. RESULTS: We show that the establishment of Omicron at IHEs precedes that of the state and region and that the time to fixation is shorter at IHEs (9.5-12.5 days) than in the state (14.8 days) or region. We show that the trajectory of Omicron fixation among university employees resembles that of students, with a 2- to 3-day delay. Finally, we compare cycle threshold values in Omicron vs Delta variant cases on college campuses and identify lower viral loads among college affiliates who harbor Omicron infections. CONCLUSIONS: We document the rapid takeover of the Omicron variant at IHEs, reaching near-fixation within the span of 9.5-12.5 days despite lower viral loads, on average, than the previously dominant Delta variant. These findings highlight the transmissibility of Omicron, its propensity to rapidly dominate small populations, and the ability of robust asymptomatic surveillance programs to offer early insights into the dynamics of pathogen arrival and spread.

Comparison of anterior nares CT values in asymptomatic and symptomatic individuals diagnosed with SARS-CoV-2 in a university screening program.

At our university based high throughput screening program, we test all members of our community weekly using RT-qPCR. RT-qPCR cycle threshold (CT) values are inversely proportional to the amount of viral RNA in a sample and are a proxy for viral load. We hypothesized that CT values would be higher, and thus the viral loads at the time of diagnosis would be lower, in individuals who were infected with the virus but remained asymptomatic throughout the course of the infection. We collected the N1 and N2 target gene CT values from 1633 SARS-CoV-2 positive RT-qPCR tests of individuals sampled between August 7, 2020, and March 18, 2021, at the BU Clinical Testing Laboratory. We matched this data with symptom reporting data from our clinical team. We found that asymptomatic patients had CT values significantly higher than symptomatic individuals on the day of diagnosis. Symptoms were followed by the clinical team for 10 days post the first positive test. Within the entire population, 78.1% experienced at least one symptom during surveillance by the clinical team (n = 1276/1633). Of those experiencing symptoms, the most common symptoms were nasal congestion (73%, n = 932/1276), cough (60.0%, n = 761/1276), fatigue (59.0%, n = 753/1276), and sore throat (53.1%, n = 678/1276). The least common symptoms were diarrhea (12.5%, n = 160/1276), dyspnea on exertion (DOE) (6.9%, n = 88/1276), foot or skin changes (including rash) (4.2%, n = 53/1276), and vomiting (2.1%, n = 27/1276). Presymptomatic individuals, those who were not symptomatic on the day of diagnosis but became symptomatic over the following 10 days, had CT values higher for both N1 (median = 27.1, IQR 20.2-32.9) and N2 (median = 26.6, IQR 20.1-32.8) than the symptomatic group N1 (median = 21.8, IQR 17.2-29.4) and N2 (median = 21.4, IQR 17.3-28.9) but lower than the asymptomatic group N1 (median = 29.9, IQR 23.6-35.5) and N2 (median = 30.0, IQR 23.1-35.7). This study supports the hypothesis that viral load in the anterior nares on the day of diagnosis is a measure of disease intensity at that time.

Buildout and integration of an automated high-throughput CLIA laboratory for SARS-CoV-2 testing on a large urban campus.

In 2019, the first cases of SARS-CoV-2 were detected in Wuhan, China, and by early 2020 the first cases were identified in the United States. SARS-CoV-2 infections increased in the US causing many states to implement stay-at-home orders and additional safety precautions to mitigate potential outbreaks. As policies changed throughout the pandemic and restrictions lifted, there was an increase in demand for COVID-19 testing which was costly, difficult to obtain, or had long turn-around times. Some academic institutions, including Boston University (BU), created an on-campus COVID-19 screening protocol as part of a plan for the safe return of students, faculty, and staff to campus with the option for in-person classes. At BU, we put together an automated high-throughput clinical testing laboratory with the capacity to run 45,000 individual tests weekly by Fall of 2020, with a purpose-built clinical testing laboratory, a multiplexed reverse transcription PCR (RT-qPCR) test, robotic instrumentation, and trained staff. There were many challenges including supply chain issues for personal protective equipment and testing materials in addition to equipment that were in high demand. The BU Clinical Testing Laboratory (CTL) was operational at the start of Fall 2020 and performed over 1 million SARS-CoV-2 PCR tests during the 2020-2021 academic year.

Surface Requirements for Optimal Biosensing with Disposable Gold Electrodes.

Electrochemical biosensors are promising technologies for detection and monitoring in low-resource settings due to their potential for easy use and low-cost instrumentation. Disposable gold screen-printed electrodes (SPEs) are popular substrates for these biosensors, but necessary dopants in the ink used for their production can interfere with biosensor function and contribute to the heterogeneity of these electrodes. We recently reported an alternative disposable gold electrode made from gold leaf generated using low-cost, equipment-free fabrication. We have directly compared the surface topology, biorecognition element deposition, and functional performance of three disposable gold electrodes: our gold leaf electrodes and two commercial SPEs. Our leaf electrodes significantly outperformed the SPEs for reproducible and effective biosensing in a DNase I assay and are nearly an order of magnitude less expensive than the SPEs. Therefore, these electrodes are promising for further development as point-of-care diagnostics, especially in low-resource settings.

An Allosteric Transcription Factor DNA-Binding Electrochemical Biosensor for Progesterone.

We describe an electrochemical strategy to transduce allosteric transcription factor (aTF) binding affinity to sense steroid hormones. Our approach utilizes square wave voltammetry to monitor changes in current output as a progesterone (PRG)-specific aTF (SRTF1) unbinds from the cognate DNA sequence in the presence of PRG. The sensor detects PRG in artificial urine samples with sufficient sensitivity suitable for clinical applications. Our results highlight the capability of using aTFs as the biorecognition elements to develop electrochemical point-of-care biosensors for the detection of small-molecule biomarkers and analytes.

Paper-Based Progesterone Sensor Using an Allosteric Transcription Factor.

Progesterone monitoring is an essential component of in vitro fertilization treatments and reproductive management of dairy cows. Gold-standard biosensors for progesterone monitoring rely on antibodies, which are expensive and difficult to procure. We have developed an alternative transcription factor-based sensor that is superior to conventional progesterone biosensors. Here, we incorporate this transcription factor-based progesterone sensor into an affordable, portable paperfluidic format to facilitate widespread implementation of progesterone monitoring at the point of care. Oligonucleotides labeled with a fluorescent dye are immobilized onto nitrocellulose via a biotin-streptavidin interaction. In the absence of progesterone, these oligonucleotides form a complex with a transcription factor that is fluorescently labeled with tdTomato. In the presence of progesterone, the fluorescent transcription factor unbinds from the immobilized DNA, resulting in a decrease in tdTomato fluorescence. The limit of detection of our system is 27 nm, which is a clinically relevant level of progesterone. We demonstrate that transcription factor-based sensors can be incorporated into paperfluidic devices, thereby making them accessible to a broader population due to the portability and affordability of paper-based devices.

Tunable Duplex Semiquantitative Detection of Nucleic Acids with a Visual Lateral Flow Immunoassay Readout.

Quantitative nucleic acid amplification testing (NAAT) is a key enabling technology for infectious disease management, especially in instances where viral load informs therapeutic decisions. Inadequate access to quantitative NAATs remains a challenge to the successful deployment of antiretroviral therapy (ART) regimens for patients with chronic hepatitis B virus (CHB) in low resourced settings (LRS). Current field-deployable NAATs are generally qualitative (yes/no) rather than quantitative in nature, making them ill-suited for viral load monitoring programs for CHB patients. Here, we report the development of a proof-of-concept molecular diagnostic test, the semiquantitative ligation and amplification (SQLA) assay, which achieves semiquantitative detection of input target DNA at two independently tunable detection thresholds with a simple visual readout. The SQLA assay utilizes a duplex competitive thermophilic helicase-dependent amplification (tHDA) chemistry and can be performed in under 1 h.

Strategies for Engineering Affordable Technologies for Point-of-Care Diagnostics of Infectious Diseases.

Disease prevalence is highest in low-resource settings (LRS) due to the lack of funds, infrastructure, and personnel required to carry out laboratory-based molecular tests. In high-resource settings, gold-standard molecular tests for diseases consist of nucleic acid amplification tests (NAATs) due to their excellent sensitivity and specificity. These tests require the extraction, amplification, and detection of nucleic acids from clinical samples. In high-resource settings, all three of these steps require highly specialized, costly, and onerous equipment that cannot be used in LRS. Nucleic acid extraction involves multiple centrifugation steps. Amplification consists of the polymerase chain reaction (PCR), which requires thermal cyclers. The detection of amplified DNA is typically done with specialized thermal cyclers that are capable of fluorescence detection. Traditional methods used to extract, amplify, and detect nucleic acids cannot be used outside of a laboratory in LRS. Thus, there is a need for affordable point-of-care devices to ease the high burden of disease in LRS.The past decade of work on paper-based fluidic devices has resulted in the invention of many paper-based biosensors for disease detection as well as isothermal amplification techniques that replace PCR. However, a challenge still remains in detecting pathogenic biomarkers from complex human samples without specialized laboratory equipment. Our research has focused on the development of affordable technologies to extract and detect nucleic acids in clinical samples with minimal equipment. Here we describe methods for the paper-based extraction, amplification, and detection of nucleic acids. This Account provides an overview of our latest technologies developed to detect an array of diseases in low-resource settings. We focus on detecting nucleic acids of H1N1, human papillomavirus (HPV), Neisseria gonorrheae (NG), Chlamydia trachomatis (CT), Trichomonas vaginalis (TV), and malaria from a variety of clinical sample types. H1N1 RNA was extracted from nasopharyngeal swabs; HPV, NG, and CT DNA were extracted from either cervical, urethral, or vaginal swabs; TV DNA was extracted from urine; and malaria DNA was extracted from whole blood. Different sample types necessitate different nucleic extraction protocols; we provide guidelines for assay design based on the clinical sample type used. We compare the pros and cons of different isothermal amplification techniques, namely, helicase-dependent amplification (HDA), loop-mediated isothermal amplification (LAMP), and a novel isothermal amplification technique that we developed: isothermal-identical multirepeat sequences (iso-IMRS). Finally, we compare various detection mechanisms, including lateral-flow and electrochemical readouts. Electrochemical readouts frequently employ gold electrodes due to strong gold-thiol coupling. However, the high cost of gold precludes their use in LRS. We discuss our development of novel gold leaf electrodes that can be made without specialized equipment for a fraction of the cost of commercially available gold electrodes.

Electrochemical Strategy for Low-Cost Viral Detection.

Sexually transmitted infections, including the human immunodeficiency virus (HIV) and the human papillomavirus (HPV), disproportionally impact those in low-resource settings. Early diagnosis is essential for managing HIV. Similarly, HPV causes nearly all cases of cervical cancer, the majority (90%) of which occur in low-resource settings. Importantly, infection with HPV is six times more likely to progress to cervical cancer in women who are HIV-positive. An inexpensive, adaptable point-of-care test for viral infections would make screening for these viruses more accessible to a broader set of the population. Here, we report a novel, cost-effective electrochemical platform using gold leaf electrodes to detect clinically relevant viral loads. We have combined this platform with loop-mediated isothermal amplification and a CRISPR-based recognition assay to detect HPV. Lower limits of detection were demonstrated down to 104 total copies of input nucleic acids, which is a clinically relevant viral load for HPV DNA. Further, proof-of-concept experiments with cervical swab samples, extracted using standard extraction protocols, demonstrated that the strategy is extendable to complex human samples. This adaptable technology could be applied to detect any viral infection rapidly and cost-effectively.

Amplicon residues in research laboratories masquerade as COVID-19 in surveillance tests.

Asymptomatic surveillance testing together with COVID-19-related research can lead to positive SARS-CoV-2 tests resulting not from true infections, but non-infectious, non-hazardous by-products of research (amplicons). Amplicons can be widespread and persistent in lab environments and can be difficult to distinguish for true infections. We discuss prevention and mitigation strategies.

Development and Clinical Validation of Iso-IMRS: A Novel Diagnostic Assay for P. falciparum Malaria.

In many countries targeting malaria elimination, persistent malaria infections can have parasite loads significantly below the lower limit of detection (LLOD) of standard diagnostic techniques, making them difficult to identify and treat. The most sensitive diagnostic methods involve amplification and detection of Plasmodium DNA by polymerase chain reaction (PCR), which requires expensive thermal cycling equipment and is difficult to deploy in resource-limited settings. Isothermal DNA amplification assays have been developed, but they require complex primer design, resulting in high nonspecific amplification, and show a decrease in sensitivity than PCR methods. Here, we have used a computational approach to design a novel isothermal amplification assay with a simple primer design to amplify P. falciparum DNA with analytical sensitivity comparable to PCR. We have identified short DNA sequences repeated throughout the parasite genome to be used as primers for DNA amplification and demonstrated that these primers can be used, without modification, to isothermally amplify P. falciparum parasite DNA via strand displacement amplification. Our novel assay shows a LLOD of ∼1 parasite/µL within a 30 min amplification time. The assay was demonstrated with clinical samples using patient blood and saliva. We further characterized the assay using direct amplicon next-generation sequencing and modified the assay to work with a visual readout. The technique developed here achieves similar analytical sensitivity to current gold standard PCR assays requiring a fraction of time and resources for PCR. This highly sensitive isothermal assay can be more easily adapted to field settings, making it a potentially useful tool for malaria elimination.

Ultrasensitive CRISPR-based diagnostic for field-applicable detection of Plasmodium species in symptomatic and asymptomatic malaria.

Asymptomatic carriers of Plasmodium parasites hamper malaria control and eradication. Achieving malaria eradication requires ultrasensitive diagnostics for low parasite density infections (<100 parasites per microliter blood) that work in resource-limited settings (RLS). Sensitive point-of-care diagnostics are also lacking for nonfalciparum malaria, which is characterized by lower density infections and may require additional therapy for radical cure. Molecular methods, such as PCR, have high sensitivity and specificity, but remain high-complexity technologies impractical for RLS. Here we describe a CRISPR-based diagnostic for ultrasensitive detection and differentiation of Plasmodium falciparum, Plasmodium vivax, Plasmodium ovale, and Plasmodium malariae, using the nucleic acid detection platform SHERLOCK (specific high-sensitivity enzymatic reporter unlocking). We present a streamlined, field-applicable, diagnostic comprised of a 10-min SHERLOCK parasite rapid extraction protocol, followed by SHERLOCK for 60 min for Plasmodium species-specific detection via fluorescent or lateral flow strip readout. We optimized one-pot, lyophilized, isothermal assays with a simplified sample preparation method independent of nucleic acid extraction, and showed that these assays are capable of detection below two parasites per microliter blood, a limit of detection suggested by the World Health Organization. Our P. falciparum and P. vivax assays exhibited 100% sensitivity and specificity on clinical samples (5 P. falciparum and 10 P. vivax samples). This work establishes a field-applicable diagnostic for ultrasensitive detection of asymptomatic carriers as well as a rapid point-of-care clinical diagnostic for nonfalciparum malaria species and low parasite density P. falciparum infections.

Hydrogel-Embedded Quantum Dot-Transcription Factor Sensors for Quantitative Progesterone Detection.

Immobilization of biosensors in or on a functional material is critical for subsequent device development and translation to wearable technology. Here, we present the development and assessment of an immobilized quantum dot-transcription factor-nucleic acid complex for progesterone detection as a first step toward such device integration. The sensor, composed of a polyhistidine-tagged transcription factor linked to a quantum dot and a fluorophore-modified cognate DNA, is embedded within a hydrogel as an immobilization matrix. The hydrogel is optically transparent, soft, and flexible as well as traps the quantum dot-transcription factor DNA assembly but allows free passage of the analyte, progesterone. Upon progesterone exposure, DNA dissociates from the quantum dot-transcription factor DNA assembly resulting in an attenuated ratiometric fluorescence output via Förster resonance energy transfer. The sensor performs in a dose-dependent manner with a limit of detection of 55 nM. Repeated analyte measurements are similarly successful. Our approach combines a systematically characterized hydrogel as an immobilization matrix and a transcription factor-DNA assembly as a recognition/transduction element, offering a promising framework for future biosensor devices.

SNAPflex: a paper-and-plastic device for instrument-free RNA and DNA extraction from whole blood.

Nucleic acid amplification tests (NAATs), which amplify and detect pathogen nucleic acids, are vital methods to diagnose diseases, particularly in cases where patients exhibit low levels of infection. For many blood-borne pathogens such as HIV or Plasmodium falciparum, it is necessary to first extract pathogen RNA or DNA from patient blood prior to NAAT analysis. Traditional nucleic acid extraction methods are expensive, resource-intensive and are often difficult to deploy to resource-limited areas where many blood-borne infections are widespread. Here, we describe a portable, paper-and-plastic device, called SNAPflex, for instrument-free nucleic acid extraction from whole blood, which builds upon our previous work for RNA extraction using a pressure-driven extraction system. SNAPflex shows improved HIV RNA extraction from simulated patient samples compared to traditional extraction methods as well as long-term stability of extracted RNA without the need for cold storage. We further demonstrated successful extraction and recovery of P. falciparum DNA from cultured parasites in whole blood. SNAPflex was designed to be easily manufacturable and deployable to resource-limited settings.

Surface Immobilized Nucleic Acid-Transcription Factor Quantum Dots for Biosensing.

Immobilization of biosensors on surfaces is a key step toward development of devices for real-world applications. Here the preparation, characterization, and evaluation of a surface-bound transcription factor-nucleic acid complex for analyte detection as an alternative to conventional systems employing aptamers or antibodies are described. The sensor consists of a gold surface modified with thiolated Cy5 fluorophore-labeled DNA and an allosteric transcription factor (TetR) linked to a quantum dot (QD). Upon addition of anhydrotetracycline (aTc)-the analyte-the TetR-QDs release from the surface-bound DNA, resulting in loss of the Förster resonance energy transfer signal. The sensor responds in a dose-dependent manner over the relevant range of 0-200 µm aTc with a limit of detection of 80 nm. The fabrication of the sensor and the subsequent real-time quantitative measurements establish a framework for the design of future surface-bound, affinity-based biosensors using allosteric transcription factors for molecular recognition.

Rapid electrostatic DNA enrichment for sensitive detection of Trichomonas vaginalis in clinical urinary samples.

Estimated to be the most common non-viral sexually transmitted infection globally, Trichomonas vaginalis (TV) can lead to pelvic inflammatory disease, pregnancy complications, and increased risk of acquiring and transmitting HIV. Once diagnosed, TV infection can be treated with oral antibiotics; however, infected individuals are often asymptomatic and do not seek treatment. The WHO and others have identified a need for point-of-care tests to expand access to TV testing and screening; ideal test characteristics include high sensitivity and specificity and the ability to use urine as a sample type, rather than invasively collected swab samples. Here, we report on a proof-of-concept prototype for rapid, electrostatic enrichment of DNA from urine samples and demonstrate the use of large volumes of urine to increase sensitivity of downstream nucleic acid amplification testing. We developed an internally controlled thermophilic helicase-dependent amplification (tHDA) assay with lateral flow immunoassay readout and demonstrate that this tHDA assay can be performed directly on our DNA capture filter. We validated our method using clinical urine samples with qPCR-quantified TV loads. Using 62 clinical urine samples and a simple sample processing device, our tHDA assay displayed 96.6% sensitivity and 100% specificity. Our analytical limit of detection was found to be approximately 7 genomic equivalents of TV DNA per mL of sample when 1 mL of sample was tested, comparable to existing isothermal tests for TV. Using large-volume simulated samples (40 mL of buffered urine with spiked-in TV DNA), we also demonstrated that sensitivity could be improved 28-fold to 0.25 genomic equivalents of TV DNA per mL, with a sample processing time of only 2 minutes.

Biomaterials and Contraception: Promises and Pitfalls.

The present state of reproductive and sexual health around the world reveals disparities in contraceptive use and effectiveness. Unintended pregnancy and sexually transmitted infection transmission rates remain high even with current prevention methods. The 20th century saw a contraceptive revolution with biomedical innovation driving the success of new contraceptive technologies with central design concepts and materials. Current modalities can be broadly categorized according to their mode of function: reversible methods such as physical/chemical barriers or hormonal delivery devices via systemic (transdermal and subcutaneous) or localized (intrauterine and intravaginal) administration, and nonreversible sterilization procedures such as tubal ligation and vasectomy. Contraceptive biomaterials are at present dominated by well-characterized elastomers such as polydimethylsiloxane and ethylene vinyl acetate due to their favorable material properties and versatility. Contraceptives alter the normal function of cellular components in the reproductive systems to impair fertility. The purpose of this review is to highlight the bioengineering design of existing methods, explore novel adaptations, and address notable shortcomings in current contraceptive technologies.

Genome Mining-Based Identification of Identical Multirepeat Sequences in Plasmodium falciparum Genome for Highly Sensitive Real-Time Quantitative PCR Assay and Its Application in Malaria Diagnosis.

Developing ultrasensitive methods capable of detecting submicroscopic parasitemia-a challenge that persists in low transmission areas, asymptomatic carriers, and patients showing recrudescence-is vital to achieving malaria eradication. Nucleic acid amplification techniques offer improved analytical sensitivity but are limited by the number of copies of the amplification targets. Herein, we perform a novel genome mining approach to identify a pair of identical multirepeat sequences (IMRSs) that constitute 170 and 123 copies in the Plasmodium falciparum genome and explore their potential as primers for PCR. Real-time quantitative PCR analyses have shown the ability of P. falciparum IMRSs to amplify as low as 2.54 fg of P. falciparum genomic DNA (approximately 0.1 parasite), with a striking 100-fold increase in detection limit when compared with P. falciparum 18S rRNA (251.4 fg; approximately 10 parasites). Validation with clinical samples from malaria-endemic regions has shown 6.70 ± 1.66 cycle better detection threshold in terms of Ct value for P. falciparum IMRSs, with approximately 100% sensitivity and specificity. Plasmodium falciparum IMRS assays are also capable of detecting submicroscopic infections in asymptomatic samples. To summarize, this approach of initiating amplification at multiple loci across the genome and generating more products with increased analytical sensitivity is different from classic approaches amplifying multicopy genes or tandem repeats. This can serve as a platform technology to develop advanced diagnostics for various pathogens.