Assessment of the application of selected metal-organic frameworks as advanced sorbents in passive extraction used in the monitoring of contaminants of emerging concern in surface waters.

Water pollution has become a critical global concern requiring effective monitoring techniques and robust protection strategies. Contaminants of emerging concern (CECs) are increasingly detected in various water sources, with their harmful effects on humans and ecosystems continually evolving. Based on literature reports highlighting the promising sorption properties of metal-organic frameworks (MOFs), the aim of this study was to evaluate the suitability of NH2-MIL-125 (Ti) and UiO-66 (Ce) as sorbents in passive sampling devices (MOFs-PSDs) for the collection and extraction of a wide group of CECs. Solvothermal methods were used to synthesize MOFs, and the characterization of the obtained materials was performed using field-emission scanning electron microscopy (FE-SEM), powder X-ray diffractometry (pXRD) and Fourier-transform infrared (FTIR) spectroscopy. The research demonstrated the sorption capabilities of the tested MOFs, the ease and rapidity of their chemical regeneration and the possibility of reuse as sorbents. Using chemometric analysis, the structural properties of CECs determining the sorption efficiency on the surface of NH2-MIL-125 (Ti) were identified. The MOFs-PSDs were lab-calibrated to examine the kinetics of analytes sorption and determine the sampling rates (Rs). MOFs-PSDs and CNTs-PSDs (PSDs containing carbon nanotubes as a sorbent) were then placed in the Elblag River and the Vistula Lagoon to sampling and extraction of the target compounds from the water. CNTs-PSDs were selected, based on our previous research, for the comparison of the effectiveness of the MOFs-PSDs in environmental monitoring. MOFs-PSDs were successfully used in monitoring of CECs in water. The time-weighted average concentrations (CTWA) of 2-hydroxycarbamazepine, carbamazepine-10,11-epoxide, p-nitrophenol, 3,5-dichlorophenol and caffeine were determined in the Elblag River and CTWA of metoprolol, diclofenac, 2-hydroxycarbamazepine, carbamazepine-10,11-epoxide, p-nitrophenol, 3,5-dichlorophenol and caffeine were determine in the Vistula Lagoon using MOFs-PSDs and a high-performance liquid chromatography coupled with triple quadrupole mass spectrometer.

Detailed Insight into Photocatalytic Inactivation of Pathogenic Bacteria in the Presence of Visible-Light-Active Multicomponent Photocatalysts.

The use of heterogeneous photocatalysis in biologically contaminated water purification processes still requires the development of materials active in visible light, preferably in the form of thin films. Herein, we report nanotube structures made of TiO2/Ag2O/Au0, TiO2/Ag2O/PtOx, TiO2/Cu2O/Au0, and TiO2/Cu2O/PtOx obtained via one-step anodic oxidation of the titanium-based alloys (Ti94Ag5Au1, Ti94Cu5Pt1, Ti94Cu5Au1, and Ti94Ag5Pt1) possessing high visible light activity in the inactivation process of methicillin-susceptible S. aureus and other pathogenic bacteria-E. coli, Clostridium sp., and K. oxytoca. In the samples made from Ti-based alloys, metal/metal oxide nanoparticles were formed, which were located on the surface and inside the walls of the NTs. The obtained results showed that oxygen species produced at the surface of irradiated photocatalysts and the presence of copper and silver species in the photoactive layers both contributed to the inactivation of bacteria. Photocatalytic inactivation of E. coli, S. aureus, and Clostridium sp. was confirmed via TEM imaging of bacterium cell destruction and the detection of CO2 as a result of bacteria cell mineralization for the most active sample. These results suggest that the membrane ruptures as a result of the attack of active oxygen species, and then, both the membrane and the contents are mineralized to CO2.

Superconductivity-Electron Count Relationship in Heusler Phases-the Case of LiPd2Si.

We report superconductivity in the full Heusler compound LiPd2Si (space group Fm3̅m, No. 225) at a critical temperature of Tc = 1.3 K and a normalized heat capacity jump at Tc, ΔC/γTc = 1.1. The low-temperature isothermal magnetization curves imply type-I superconductivity, as previously observed in LiPd2Ge. We show, based on density functional theory calculations and using the molecular orbital theory approach, that while LiPd2Si and LiPd2Ge share the Pd cubic cage motif that is found in most of the reported Heusler superconductors, they show distinctive features in the electronic structure. This is due to the fact that Li occupies the site which, in other compounds, is filled with an early transition metal or a rare-earth metal. Thus, while a simple valence electron count-property relationship is useful in predicting and tuning Heusler materials, inclusion of the symmetry of interacting frontier orbitals is also necessary for the best understanding.

Magnetic superhydrophobic melamine sponges for crude oil removal from water.

This paper proposes the preparation of a new sorbent material based on melamine sponges (MS) with superhydrophobic, superoleophilic, and magnetic properties. This study involved impregnating the surface of commercially available MS with eco-friendly deep eutectic solvents (DES) and Fe3O4 nanoparticles. The DES selection was based on the screening of 105 eutectic mixtures using COSMO-RS modeling. Other parameters affecting the efficiency and selectivity of oil removal from water were optimized using the Box-Bhenken model. Menthol:Thymol (1:1)@Fe3O4-MS exhibited the highest sorption capacity for real crude oils (101.7-127.3 g/g). This new sponge demonstrated paramagnetic behavior (31.06 emu/g), superhydrophobicity (151°), superoleophobicity (0°), low density (15.6 mg/cm3), high porosity (99 %), and excellent mechanical stability. Furthermore, it allows multiple regeneration processes without losing its sorption capacity. Based on these benefits, Menthol:Thymol (1:1)@Fe3O4-MS shows promise as an efficient, cost-effective, and eco-friendly substitute for the existing sorbents.

New heterometallic Co/Zn, Ag/Co, and Ag/Zn imidazolates: structural characterization and catalytic activity in the oxidation of organic compounds.

Nanocrystalline powders of monometallic and bimetallic imidazolates of Co, Zn and Ag were produced by a reaction carried out in water. The powders were characterized by powder X-ray diffraction and the crystal structures of the new compounds Ag2ZnIm4 and Ag2CoIm4 (Im = imidazolate) were solved. Heterometallic Co/Zn imidazolates showed the known Zn-zni crystal structure while Ag/Zn and Ag/Co systems were isostructural to the copper analogs. The powders were further characterized by EDX, UV-Vis and FTIR ATR spectroscopy in the solid state. The catalytic experiments indicated that out of the studied heterometallic compounds only Ag2Co(Im)4 exhibits some catalytic activity in the oxidation reaction of 1-phenylethanol with tert-butylhydroperoxide at elevated temperatures.

Superconductivity in a breathing kagome metals ROs2 (R = Sc, Y, Lu).

We have successfully synthesized three osmium-based hexagonal Laves compounds ROs2 (R = Sc, Y, Lu), and discussed their physical properties. LeBail refinement of pXRD data confirms that all compounds crystallize in the hexagonal centrosymmetric MgZn2-type structure (P63/mmc, No. 194). The refined lattice parameters are a = b = 5.1791(1) Å and c = 8.4841(2) Å for ScOs2, a = b = 5.2571(3) Å and c = 8.6613(2) Å for LuOs2 and a = b = 5.3067(6) Å and c = 8.7904(1) Å for YOs2. ROs2 Laves phases can be viewed as a stacking of kagome nets interleaved with triangular layers. Temperature-dependent magnetic susceptibility, resistivity and heat capacity measurements confirm bulk superconductivity at critical temperatures, Tc, of 5.36, 4.55, and 3.47 K for ScOs2, YOs2, and LuOs2, respectively. We have shown that all investigated Laves compounds are weakly-coupled type-II superconductors. DFT calculations revealed that the band structure of ROs2 is intricate due to multiple interacting d orbitals of Os and R. Nonetheless, the kagome-derived bands maintain their overall shape, and the Fermi level crosses a number of bands that originate from the kagome flat bands, broadened by interlayer interaction. As a result, ROs2 can be classified as (breathing) kagome metal superconductors.

Design and Synthesis of NTU-9/C3N4 Photocatalysts: Effects of NTU-9 Content and Composite Preparation Method.

Hybrid materials based on graphitic carbon nitride (g-C3N4) and NTU-9 metal-organic frameworks (MOF) were designed and prepared via solvothermal synthesis and calcination in air. The as-prepared photocatalysts were subsequently characterized using Brunauer-Emmett-Teller (BET) analysis, UV-Vis diffuse reflectance spectroscopy (DRS), photoluminescence (PL) emission spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). The obtained NTU-9/C3N4 composites showed a greatly improved photocatalytic performance for the degradation of toluene in the gas phase under LED visible-light irradiation (λmax = 415 nm). The physicochemical properties and photocatalytic activities of the obtained NTU-9/C3N4 materials were tuned by varying the NTU-9 content (5-15 wt%) and preparation method of the composite materials. For composites prepared by calcination, the photocatalytic activity increased with decreasing NTU-9 content as a result of the formation of TiO2 from the MOFs. The best photocatalytic performance (65% of toluene was photodegraded after 60 min) was achieved by the NTU-9/C3N4 sample prepared via the solvothermal method and containing 15 wt% MOF, which can be attributed to the appropriate amount and stable combination of composite components, efficient charge separation, and enhanced visible-light absorption ability. The photocatalytic mechanisms of the prepared hybrid materials depending on the preparation method are also discussed.

The influence of magnetic particle incorporation on bisphenol A removal by ß-cyclodextrin-derived sorbent.

A novel, biomass-derived hybrid sorbent Ban-CD-EPI-Fe was successfully synthesized in a coprecipitation method, in which ß-cyclodextrin copolymerized with banana peel extract and epichlorohydrin was grafted onto an iron oxide surface. The composition, presence of functional groups, morphology, thermal stability, and magnetic properties of the obtained material were characterized by Powder X-Ray Diffraction (XRD), X-Ray Photoelectron Spectroscopy (XPS), Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy and Energy Dispersive X-Ray Spectroscopy (SEM-EDS), Thermogravimetric Analysis (TGA), and Physical Properties Measurement System (PPMS). The material bearing around 28% of ß-cyclodextrin units has mesoporous structure with plate-like morphology and active surface area determined by BET and Langmuir models equal to 38.35 and 53.59 m2 g-1, respectively. The sorption studies aimed to remove an endocrine disruptor - bisphenol A (BPA), from water. The results showed that the time evolution could be fitted with pseudo-second kinetic order with a rate constant k equal to 0.05 g mg-1 min-1. According to the Langmuir isotherm, a monolayer is created during BPA sorption, and the maximum sorption capacity was estimated as 93.5 mg g-1. After BPA sorption, the hybrid material could be easily separated by an external magnet and regenerated under mild conditions keeping its recyclability in at least eight cycles.

Photocatalytic hydrogen evolution from glycerol-water mixture under visible light over zinc indium sulfide (ZnIn2S4) nanosheets grown on bismuth oxychloride (BiOCl) microplates.

ZnIn2S4 (ZIS) is one of the widely studied photocatalyst for photocatalytic hydrogen evolution applications due to its prominent visible light response and strong reduction ability. However, its photocatalytic glycerol reforming performance for hydrogen evolution has never been reported. Herein, the visible light driven BiOCl@ZnIn2S4 (BiOCl@ZIS) composite was synthesized by growth of ZIS nanosheets on a template-like hydrothermally pre-prepared wide-band-gap BiOCl microplates using simple oil-bath method to be used for the first time for photocatalytic glycerol reforming for photocatalytic hydrogen evolution (PHE) under visible light irradiation (λ > 420 nm). The optimum amount of BiOCl microplates in the composite was found 4 wt% (4% BiOCl@ZIS) in the presence of in-situ 1 wt% Pt deposition. Then, the in-situ Pt photodeposition optimization studies over 4% BiOCl@ZIS composite showed the highest PHE rate of 674 µmol g-1h-1 with the ultra-low platinum amount (0.0625 wt%). The possible mechanisms behind this improvement can be ascribed to the formation of Bi2S3 low-band-gap semiconductor during BiOCl@ZIS composite synthesis resulting in Z-scheme charge transfer mechanism between ZIS and Bi2S3 upon visible light irradiation. This work expresses not only the photocatalytic glycerol reforming over ZIS photocatalyst but also a solid proof of the contribution of wide-band-gap BiOCl photocatalysts to enhancement of ZIS PHE performance under visible light.

Hydrogen Production Mechanism in Low-Temperature Methanol Decomposition Catalyzed by Ni3Sn4 Intermetallic Compound: A Combined Operando and Density Functional Theory Investigation.

Hydrogen production from methanol decomposition to syngas (H2 + CO) is a promising alternative route for clean energy transition. One major challenge is related to the quest for stable, cost-effective, and selective catalysts operating below 400 °C. We illustrate an investigation of the surface reactivity of a Ni3Sn4 catalyst working at 250 °C, by combining density functional theory, operando X-ray absorption spectroscopy, and high-resolution transmission electron microscopy. We discovered that the catalytic reaction is driven by surface tin-oxide phases, which protects the underlying Ni atoms from irreversible chemical modifications, increasing the catalyst durability. Moreover, we found that Sn content plays a key role in enhancing the H2 selectivity, with respect to secondary products such as CO2. These findings open new perspectives for the engineering of scalable and low-cost catalysts for hydrogen production.

Vibrational Properties of LaNb0.8 M0.2 O4-δ (M=As, Sb, V, and Ta).

LaNb0.8 M0.2 O4-δ (where M=As, Sb, V, and Ta) oxides with pentavalent elements of different ionic sizes were synthesized by a solid-state reaction method. The vibrational properties of these oxides have been investigated. These studies revealed that the substituent element influences both Debye temperature value as well as the Raman active vibrational modes. Additionally, the low-temperature vibrational properties of LaNb0.8 Sb0.2 O4-δ have been determined to show the phase transition occurrence at 260 K which is lower than previously reported.

Chemical Pressure Tuning Magnetism from Pyrochlore to Triangular Lattices.

Geometrically frustrated lattices combined with magnetism usually host quantum fluctuations that suppress magnetic orders and generate highly entangled ground states. Three-dimensionally (3D) frustrated magnets generally exist in the diamond and pyrochlore lattices, while two-dimensionally (2D) frustrated geometries contain Kagomé, triangular, and honeycomb lattices. In this work, we reported using chemical pressure to tune the magnetism of the pyrochlore lattice in LiYbSe2 into a triangular lattice by doping Ga or In. Li3-xGaxYb3Se6 and Li3-xInxYb3-yInySe6/Li3-xInxYb3-y□ySe6 crystallize in a trigonal α-NaFeO2 structure-type (space group R3̅m) and can be synthesized using either LiCl or Se flux. In Li3-xGaxYb3Se6, Ga3+ and Li+ are mixed, leaving Yb3+ on the triangular plane. Instead of just Li+ being replaced in Li3-xGaxYb3Se6, In3+ was observed in both the Li+ and Yb3+ layers in Li3-xInxYb3-yInySe6 depending on the reaction conditions. Dominant antiferromagnetic interactions are revealed by magnetic measurements in both Li3-xGaxYb3Se6 and Li3-xInxYb3-yInySe6/Li3-xInxYb3-y□ySe6. However, no long-range magnetic order is detected in thermomagnetic measurements above 1.8 K due to geometrical frustration. Thus, Li3-xGaxYb3Se6, Li3-xInxYb3-yInySe6/Li3-xInxYb3-y□ySe6, and the LiYbSe2 previously discovered by our group provide an ideal platform to understand the complex structure-magnetism correlations from 3D to 2D frustrated lattices.

Solar-driven photoelectrocatalytic degradation of anticancer drugs using TiO2 nanotubes decorated with SnS quantum dots.

In recent years, the growing interest in applying photoelectrocatalysis (PEC) to decompose organic pollutants has resulted in the need to search for new photoelectrode materials with high activity under visible light radiation. The presented research showed an increased photoelectrocatalytic activity under sunlight of Ti/TiO2 sensitized with SnS quantum dots, obtained by the successive ionic layer adsorption and reaction (SILAR) method. The presence of SnS caused the enhanced absorption of visible irradiation and the reduction of recombination of generated charges by a p-n heterojunction created with the TiO2. The highest efficiency of photoelectrocatalytic degradation of anticancer drugs (ifosfamide, 5-fluorouracil, imatinib) was achieved for the SnS-Ti/TiO2 photoelectrode with a SnS quantum dot size from 4 to 10 nm. In addition, a decrease of IF PEC degradation efficiency was observed with increasing pH and with the presence of Cl-, NO3-, HCO3- and organic matter in the treated solution. Studies of the PEC mechanism have shown that drug degradation occurs mainly as a result of the direct and indirect action of photogenerated holes on the SnS-Ti/TiO2 photoelectrode, and the identified degradation products allowed for the presentation of the degradation pathway of IF, 5-FU and IMB. Duckweed (Lemna minor) growth inhibition tests showed no toxicity of the drug solutions after treatment.

Ti/TiO2 nanotubes sensitized PbS quantum dots as photoelectrodes applied for decomposition of anticancer drugs under simulated solar energy.

One of the challenges in research into photoelectrocatalytic (PEC) degradation of pollutants is finding the appropriate photoanode material, which has a significant impact on the process efficiency. Among all others, photoelectrodes based on an ordered TiO2 nanotube arrays are a promising material due to well-developed surface area and efficient charge separation. To increase the PEC activity of this material, the SILAR method was used to decorate Ti/TiO2 nanotubes by PbS quantum dots (QD). The ifosfamide (IF) degradation rate constants was twice as higher for PbS-Ti/TiO2 (0.0148 min-1) than for Ti/TiO2 (0.0072 min-1). Our research showed the highest efficiency of PEC degradation of drugs using IIIPbS-Ti/TiO2 made with 3 SILAR cycles (PbS QD size mainly 2-4 nm). The 4 and 6 of SILAR cycles resulted in the aggregation of PbS nanoparticles on the Ti/TiO2 surface and decreased IF PEC degradation rate to 0.0043 and 0.0033 min-1, respectively. Research on PEC mechanism has shown that the drugs are degraded mainly by the activity of photogenerated holes and hydroxyl radicals. In addition, the identified drug intermediates made possible to propose a degradation pathways of anticancer drugs and the ecotoxicity test show no inhibition of Lemna minor growth of treated solutions.

Boron-Doped Diamond/GaN Heterojunction-The Influence of the Low-Temperature Deposition.

We report a method of growing a boron-doped diamond film by plasma-assisted chemical vapour deposition utilizing a pre-treatment of GaN substrate to give a high density of nucleation. CVD diamond was deposited on GaN substrate grown epitaxially via the molecular-beam epitaxy process. To obtain a continuous diamond film with the presence of well-developed grains, the GaN substrates are exposed to hydrogen plasma prior to deposition. The diamond/GaN heterojunction was deposited in methane ratio, chamber pressure, temperature, and microwave power at 1%, 50 Torr, 500 °C, and 1100 W, respectively. Two samples with different doping were prepared 2000 ppm and 7000 [B/C] in the gas phase. SEM and AFM analyses revealed the presence of well-developed grains with an average size of 100 nm. The epitaxial GaN substrate-induced preferential formation of (111)-facetted diamond was revealed by AFM and XRD. After the deposition process, the signal of the GaN substrate is still visible in Raman spectroscopy (showing three main GaN bands located at 565, 640 and 735 cm-1) as well as in typical XRD patterns. Analysis of the current-voltage characteristics as a function of temperature yielded activation energy equal to 93.8 meV.

Superconductivity in LiGa2Ir Heusler type compound with VEC = 16.

Polycrystalline LiGa2Ir has been prepared by a solid state reaction method. A Rietveld refinement of powder x-ray diffraction data confirms a previously reported Heusler-type crystal structure (space group Fm-3m, No. 225) with lattice parameter a = 6.0322(1) Å. The normal and superconducting state properties were studied by magnetic susceptibility, heat capacity, and electrical resistivity techniques. A bulk superconductivity with Tc = 2.94 K was confirmed by detailed heat capacity studies. The measurements indicate that LiGa2Ir is a weak-coupling type-II superconductor ([Formula: see text]e-p = 0.57, [Formula: see text]C/[Formula: see text]Tc = 1.4). Electronic structure, lattice dynamics, and the electron-phonon interaction are studied from first principles calculations. Ir and two Ga atoms equally contribute to the Fermi surface with a minor contribution from Li. The phonon spectrum contains separated high frequency Li modes, which are seen clearly as an Einstein-like contribution in the specific heat. The calculated electron-phonon coupling constant [Formula: see text]e-p = 0.68 confirms the electron-phonon mechanism for the superconductivity. LiGa2Ir and recently reported isoelectronic LiGa2Rh are the only two known representatives of the Heusler superconductors with the valence electron count VEC = 16.

Determination of the refractive index and wavelength-dependent optical properties of few-layer CrCl 3 within the Fresnel formalism.

Based on previous reports on the optical microscopy contrast of mechanically exfoliated few layer CrCl 3 transferred on 285 nm and 270 nm SiO 2 on Si(100), we focus on the experimental determination of an effective mean complex refractive index via a fitting analysis based on the Fresnel equations formalism. Accordingly, the layer and wavelength-dependent absorbance and reflectance are calculated. Layer and wavelength-dependent optical contrast curves are then evaluated demonstrating that the contrast is significantly high only around well-defined wavelength bands. This is validated a posteriori, by experimental UV-Vis absorbance data. The present study aims to show the way towards the most reliable determination of thickness of the 2D material flakes during exfoliation.

In this work, we focus on a fast and accurate determination of the number of layers and thickness of two-dimensional (2D) CrCl 3 flakes. Like exfoliated graphite, MoS 2 or CrI 3 , CrCl 3 has many interesting aspects for its physical properties, namely the magnetic ones. As Raman characterization cannot be used in the case of CrCl 3 for its insensitivity to the flake thickness, optical contrast, as obtained by an optical microscope equipped with a digital camera, can be suitable to determine the number of exfoliated layers in a single flake. Without any additional equipment, the contrast, as routinely optimized by using specific silicon oxide (270 and 285 nm thickness) on Si wafers, can be recorded and compared with Fresnel calculations for the interference. As a result, fitting of the experimental contrast as a function of average values of light wavelength, real and imaginary refraction index provides good sensitivity to the flake thickness and useful determination of the optical parameters. The latter ones are often different from their bulk properties. In addition to optical parameters, the determination is also independent from the light source characteristics. The present approach represents in this a way a precious, fast and cheap way to determine a crucial quantity of the 2D materials flakes production.

Polytypism and superconductivity in the NbS2 system.

We report on the phase formation and the superconducting properties in the NbS2 system. Specifically, we have performed a series of standardized solid-state syntheses in this system, which allow us to establish a comprehensive synthesis map for the formation of the two polytypes 2H-NbS2 and 3R-NbS2, respectively. We show that the identification of two polytypes by means of X-ray diffraction is not always unambiguous. Our physical property measurements on a phase-pure sample of 3R-NbS2, on a phase-pure sample of 2H-NbS2, and a mixed phase sample confirm earlier reports that 2H-NbS2 is a bulk superconductor and that 3R-NbS2 is not a superconductor above T = 1.75 K. Our results clearly show that specific heat measurements, as true bulk measurements, are crucial for the identification of superconducting materials in this and related systems. Our results indicate that for the investigation of van der Waals materials great care has to be taken on choosing the synthesis conditions for obtaining phase pure samples.

Ho2Pd1.3Ge2.7 - a ternary AlB2-type cluster glass system.

We report a successful synthesis of a ternary AlB2-type intermetallic compound. The phase purity was obtained by fine-tuning the Pd : Ge ratio out of the idealized 1 : 3. Attempts to synthesize an Er analogue were not successful. We discuss the instability of the Er analogue based on the atomic size ratio and also suggest that the increased stability of Ho2Pd1+x Ge3-x in the Pd-rich range likely stems from a combination of atomic size ratio, electronic, and entropic factors. The new Ho2Pd1.3Ge2.7 compound is found to exhibit cluster glass behavior with a freezing temperature of T ≈ 2.3 K.

Superconductivity with High Upper Critical Field in the Cubic Centrosymmetric η-Carbide Nb4Rh2C1-δ.

The upper critical field is a fundamental measure of the strength of superconductivity in a material. It is also a cornerstone for the realization of superconducting magnet applications. The critical field arises because of the Cooper pair breaking at a limiting field, which is due to the Pauli paramagnetism of the electrons. The maximal possible magnetic field strength for this effect is commonly known as the Pauli paramagnetic limit given as µ0 H Pauli ≈ 1.86[T/K]·T c for a weak-coupling Bardeen-Schrieffer-Cooper (BCS) superconductor. The violation of this limit is only rarely observed. Exceptions include some low-temperature heavy Fermion and some strongly anisotropic superconductors. Here, we report on the superconductivity at 9.75 K in the centrosymmetric, cubic η-carbide-type compound Nb4Rh2C1-δ, with a normalized specific heat jump of ΔC/γT c = 1.64. We find that this material has a remarkably high upper critical field of µ0 H c2(0) = 28.5 T, which is exceeding by far its weak-coupling BCS Pauli paramagnetic limit of µ0 H Pauli = 18.1 T. Determination of the origin and consequences of this effect will represent a significant new direction in the study of critical fields in superconductors.