Bone Regeneration of Blood-derived Stem Cells within Dental Implants.

Peripheral blood (PB) is known as a source of mesenchymal stem cells (MSCs), as is bone marrow (BM), and is acquired easily. However, it is difficult to have enough MSCs, and their osteogenic capacity with dental implantations is scarce. Therefore, we characterized peripheral blood mesenchymal stem cells (PBMSCs) cultured on a bone marrow-derived mesenchymal stem cell (BMMSC) natural extracellular matrix (ECM) and demonstrated the osteogenic capability in an experimental chamber implant surgery model in rabbits. We isolated PBMSCs from rabbits by culturing on a natural ECM-coated plate during primary culture. We characterized the PBMSCs using a fluorescence-activated cell scanner, cell proliferation assay, and multiple differentiation assay and compared them with BMMSCs. We also analyzed the osteogenic potential of PBMSCs mixed with hydroxyapatite/tricalcium phosphate (HA/TCP) by transplanting them into immunocompromised mice. Then, the mixture was applied to the canals. After 3 and 6 wk, we analyzed new bone (NB) formation inside the chambers using histological and histomorphometric analyses. The PBMSCs had a similar rate of BrdU-positive cells to BMMSCs, positively expressing CD90 but negative for CD14. The PBMSCs also showed osteogenic, adipogenic, and chondrogenic ability in vitro and osteogenic ability in vivo. Histological and histomorphometric results illustrated that the PBMSC and BMMSC groups showed higher NB than the HA/TCP and defect groups in the upper and lower chambers at 6 wk and in the upper canal at 3 wk; however, there was no difference in NB among all groups in the lower canal at 3 wk. The PBMSCs have characteristics and bone regeneration ability similar to BMMSCs both in vitro and in vivo. ECM was effective for obtaining PBMSCs. Therefore, PBMSCs are a promising source for bone regeneration for clinical use.

Bone regeneration at dental implant sites with suspended stem cells.

During the maintenance of bone marrow-derived mesenchymal stem cells (BMMSCs), suspended cells are discarded normally. We noted the osteogenic potential of these cells to be like that of anchorage-dependent BMMSCs. Therefore, we characterized suspended BMMSCs from rabbit bone marrow by bioengineering and applied the suspended BMMSCs to double-canaled dental implants inserted into rabbits. After primary isolation of BMMSCs, we collected the suspended cells during primary culture on the third day. The cells were transferred and maintained on an extracellular-matrix-coated culture plate. The cells were characterized and compared with BMMSCs by colony-forming-unit fibroblast (CFU-f) and cell proliferation assay, fluorescence-activated cell sorter (FACS), in vitro multipotency, and reverse transcription polymerase chain reaction (RT-PCR). We also analyzed the osteogenic potential of cells mixed with hydroxyapatite/tricalcium phosphate (HA/TCP) and transplanted into immunocompromised mice. We compared the viability and proliferation of the suspended BMMSCs and BMMSCs on the titanium implant surface and observed cell morphology. Then, the cells mixed with HA/TCP were applied to the double-canaled implants during installation into rabbit tibia. Four weeks later, we analyzed bone formation inside the canal by histomorphometry. The suspended cells showed higher CFU-f on the extracellular matrix (ECM)-coated culture plate and similar results of proliferation capacity compared with BMMSCs. The cells also showed osteogenic, adipogenic, and chondrogenic ability. The suspended cells showed levels of attachment survival and proliferation on the surfaces of titanium implant discs to be higher than or similar to those of BMMSCs. The suspended cells as well as BMMSCs showed stronger bone formation ability in both upper and lower canals of the implants compared with controls on double-canaled implants inserted into rabbit tibia. In this study, we showed that suspended cells after primary BMMSC isolation have bone regeneration capacity like that of BMMSCs, not only in vitro but also in vivo. ECM was valuable for propagation of MSCs for cell-based bone regeneration. Therefore, the suspended cells could also be useful tools for bone regeneration after implant surgery.

The relationship between implant stability quotient values and implant insertion variables: a clinical study.

The aim of this study was to determine whether resonance frequency analysis can be integrated into the routine clinical evaluation of the initial healing of dental implants. In addition, this study was designed to verify whether there was a correlation between implant stability quotient (ISQ) values, maximum insertion torque values, angular momentum and energy, and to evaluate the importance of different clinical factors in the determination of ISQ values and maximum insertion torque values at implant insertion. Two different implant designs of 81 dental implants in 41 patients were evaluated using ISQ values. Maximum insertion torque values were obtained during the placement procedure. Two new methods were used to calculate the angular momentum developed due to implant installation as well as the energy absorbed by the bone. A linear correlation between ISQ values and maximum insertion torque values at the initial implant surgery was found (P < 0·01). There was a correlation between ISQ values and angular momentum (P < 0·05), although ISQ values and energy did not show a significant linear correlation at the initial surgery (P > 0·05). There was a correlation between maximum insertion torque values, each part's angular momentum, and their energies during installation (P < 0·01). The sequence of the variables that influenced ISQ values was implant location, design, diameter, and gender of the patient. The results of this experiment suggest that both ISQ values and new methods to calculate angular momentum and energy can help to predict implant stability.

Effect of biomimetic deposition on anodized titanium surfaces.

Surface energy and hydrophilicity of implant surfaces have been known to play an important role in subsequent cellular responses on the implant surface. The aim of the present study was to evaluate the effects of biomimetic deposition of anodized surfaces on surface wettability, surface energy, and osteoblast responses. Ti discs with 2 different surface topographies (machined and anodized) were immersed in Hanks' balanced salt solution (HBSS) and modified simulated body fluid (SBF) solution for 2 weeks at physiologic conditions of 37 °C, initial pH of 7.4, and p(CO(2)) of 0.05 atm. Scanning electron microscopic (SEM) observation and energy-dispersive spectroscopic (EDS) microanalysis showed the deposition of calcium phosphate (CaP) onto anodized Ti surfaces immersed in modified SBF. Surface energy, surface wettability, and osteoblast responses, including cell attachment capacity, cell proliferation rate, and cell differentiation level, significantly increased on anodized Ti surfaces immersed in modified SBF. The effects of biomimetic deposition with modified SBF on physiochemical surface characteristics and cell biological responses were greater on anodized surfaces than on machined surfaces. These results indicate that biomimetic deposition with effective SBF may enhance the interaction between anodized Ti surfaces and their biological environment, consequently improving bone healing of dental Ti implants.

A 3-year prospective radiographic evaluation of marginal bone level around different implant systems.

The aim of this study was to evaluate the change of marginal bone level radiographically around three different implant systems after 3 years in function. Fifty-four patients were included and randomly assigned to three treatment groups of rough-surface implants (TiUnite, n = 37), hybrid of smooth and rough-surface implants (Restore, n = 38) and rough surface with microthread implants (Hexplant, n = 45). Clinical and radiographic examinations were conducted at the time of implant loading (baseline), 1 and 3 years after loading. A three-level mixed-effect analysis of covariance (ancova) was used to test the significance of the mean marginal bone change of the three implant groups. A total 120 of 135 implants completed the study. None of the implants failed to integrate. Significant differences were noted in the marginal bone loss recorded for the three groups (P < 0.0001). At 3 years, the rough surface with microthread implants had a mean crestal bone loss of 0.59 +/- 0.30 mm; the rough-surface implants, 0.95 +/- 0.27 mm; and the hybrid surface implants, 1.05 +/- 0.34 mm. Within the limitations of this study, rough-surface implants with microthread at the coronal part might have a long-term positive effect in maintaining the marginal bone level against functional loading in comparison with implants without these two features.

Marginal bone loss around three different implant systems: radiographic evaluation after 1 year.

This study was designed to radiographically evaluate the effect of surface macro-and microstructures within the coronal portion of the external hex implant at the marginal bone change after loading. The fifty-four patients included in the study were randomly assigned to treatment groups with rough-surface implants (TiUnite, n = 45), a hybrid of smooth and rough surface implants (Restore, n = 45) or rough-surface with microthreads implants (Hexplant, n = 45). Clinical and radiographic examinations were conducted at the time of implant loading (baseline) and at 1-year post-loading. A three-level mixed-effect ancova was used to test the significance of the mean marginal bone change of the three implant groups from baseline to 1-year follow-up. At 1-year, significant differences were noted in marginal bone loss recorded for the three groups (P < 0.0001). The rough surface with microthread implants had a mean crestal bone loss of 0.42 +/- 0.27 mm; the rough surface implants, 0.81 +/- 0.27 mm; and the hybrid surface implants, 0.89 +/- 0.41 mm. Within the limitations of this study, a rough surface with microthreads at the coronal part of implant maintained the marginal bone level against functional loading better than implants without these two features.

In vivo comparison of force development with various materials of implant-supported prostheses.

The purpose of this study was to measure axial loading, generating bending moments on fibre reinforced composite (FRC) implant prostheses using strain-gauged customized abutment in vivo. Bending moments of conventional implant prosthetic material were also measured and the data were compared with those for FRC. Three unit fixed dental prostheses were made for two dental implant fixtures, which had been functioning properly for more than one year using Tescera ATL, porcelain fused to metal and gold as occlusal material. Three patients participated in this study; two patients had two implants on one side of the mandible and one had two implants on both sides of the mandible. Five sets of fixed dental prostheses were fabricated for each material and these were cemented with Temp-bond on strain-gauged customized abutments, which were screwed into the underlying implant fixtures. Axial loadings and bending moments were measured when a patient bit the experimental fixed dental prosthesis. ANOVA and the Tukey HSD test (alpha = 0.05) were used for statistical analysis. There were no significant differences in normalized bending moments among the three different implant prosthetic materials. Within the limitations of this study, Tescera ATL generated bending moments similar to conventional implant prosthetic materials such as gold and porcelain.

Effects of implant geometry and surface treatment on osseointegration after functional loading: a dog study.

The purpose of this study was to evaluate the geometry and surface characteristics of osseointegration after functional loading by radiographic, periodontal and histomorphometric analyses. We analysed three groups of implants with different geometry and surface characteristics using experimental dogs. The control group received Brånemark implants (group 1). Group 2 and group 3 implants each had a 0.5-mm pitch height but differed in surface characteristics. Group 2 implants were machine surfaced and group 3 implants were thermally oxidized at 800 degrees C for 2 h in a pure oxygen atmosphere. For these experiments, which used a total of four healthy beagle dogs, the implants were randomly installed into the extracted first, second and third premolar positions. The animals received radiographic and clinical periodontal examinations at 6 and 12 months post-loading, and were then killed for histomorphometric analysis. The radiographic analysis showed that mean crestal bone resorption in the control group was greater than that observed in the experimental groups (P < 0.05). The percentage of bone-to-implant contact for group 3 (83.7%) was significantly higher than in groups 1 (74.4%) and 2 (75.0%) (P < 0.05). Overall, implant geometry and surface treatment affected the rate of crestal bone resorption and bone healing surrounding the dental implants.

Osseointegration of anodized titanium implants under different current voltages: a rabbit study.

The oxide layer that covers a titanium surface is extremely stable and appears to have excellent biocompatibility, which can result in successful osseointegration. The aim of this study was to analyse the characteristics of an oxide layer formed by anodic oxidation (anodization), and to evaluate the extent of bone healing around the anodized implant. The screw-type implants were made of commercially pure titanium (Grade 2). The Group 1 samples had a turned surface, and three other types of experimental specimens were anodized under constant voltages of 190 V (Group 2), 230 V (Group 3) and 270 V (Group 4). The surface characteristics of each sample type were inspected. Removal torque was measured after a 4-week healing period and the histomorphometric analysis was performed 6 weeks after implantation in rabbit tibiae. There was an increase in both the size and number of pores as the anodizing voltage increased. The Ra value of the Group 4 samples was higher than those in the Group 1 and 2 samples (P < 0.05). Group 3 showed a difference compared with Group 1 (P < 0.05). A thicker oxide layer, which contained crystalline (anatase) TiO(2) with the inclusion of some electrolytes (Ca, P), was formed at the higher anodizing voltage. Group 4 had higher removal torque values and percentages of bone-to-implant contact than the other groups (P < 0.05). The anodized titanium implants showed more intimate and stronger connections with peri-implant bone during early osseointegration than the turned titanium implants in this experimental model.

A biocompatibility study of a reinforced acrylic-based hybrid denture composite resin with polyhedraloligosilsesquioxane.

Acrylic-based denture materials have several common weak points, such as shrinkage after curing, lack of strength and toxicity. In order to solve these problems, we adapted a hybrid system using acrylic polymer and polyhedraloligosilsesquioxane (POSS). The aim of the study was to investigate the biocompatibility of a reinforced acrylic-based hybrid denture composite resin with POSS. Specimens of a novel polymeric denture base resin, in which POSS was used to partially replace the commonly used base monomer, were fabricated. In order to examine changes in biocompatibility with time, fresh specimens, along with specimens soaked in distilled water for 24 and 72 h were fabricated. Three other types of acrylic denture base resins were used to prepare the resin specimens. Biocompatibility (as measured by a metabolic assay, an agar overlay test, and a mutagenesis assay) of the composites was tested. The metabolic and mutagenesis assays were conducted with pure culture medium as a control. In this study, the reinforced acrylic-based hybrid denture composite resin with POSS showed improved biocompatibility and lower mutagenicity than the control. Statistical examinations showed the cell metabolic activity of the novel polymeric denture base resin in the 72-h immersion case as having almost the same inclination as the control. We hope that these results might aid in the development of a reinforced acrylic-based denture resin.

Biological responses of anodized titanium implants under different current voltages.

The oxide layer of a titanium surface is very stable, and seems to result in excellent biocompatibility and successful osseointegration. The purpose of this study was to investigate the effects of high anodic oxidation voltages on the surface characteristics of titanium implants and the biologic response of rabbit tibiae. Bone tissue responses were evaluated by removal torque tests and histomorphometric analysis. Screw-shaped implants with microthreads were made of commercially pure titanium (Grade II). We prepared anodized implants under 300 V (group I), 400 V (group II), 500 V (group III) and 550 V (group IV). The surface characteristics of specimens were inspected according to three categories: surface morphology, surface roughness and oxide layer thickness. The screw-shaped implants were installed in rabbit tibiae. The removal torque values were measured and histomorphometric analysis was done after 1- and 3-month healing periods. Data indicate that as anodic oxidation voltage increased above 300 V, oxide layer thickness increased rapidly and pore size also increased. The roughness values of the implants increased with voltage up to 500 V, but decreased at 550 V. In the removal torque test, group III showed higher values than groups I and II at a statistically significant level (P < 0.05) after a 1-month healing period. In histomorphometric analysis, groups III and IV, after a 3-month healing period, showed greater bone to implant contact ratios for the total implant surface than did group I (P < 0.05).

An abutment screw loosening study of a Diamond Like Carbon-coated CP titanium implant.

The aim of this study was to quantify the extent of abutment screw loosening and thus understand the role of frictional and wear factors in abutment screw loosening by using a cyclic loading device to compare Diamond Like Carbon (DLC)-coated and non-coated implants. The properties of DLC films, including hardness, wear resistance, chemical stability, and biocompatibility, are similar to those of real diamond materials. In this study, a 1-mum thick DLC film served to protect and lubricate a layer of commercially-pure titanium affixed to the top of a dental implant (external hexagon-shaped implant). A cyclic loading force was then applied to the top of the prosthetic portion of the implants in order to determine the difference in looseness of the titanium abutment screw between ten DLC-coated implants and ten non-coated implants. The abutment screw loosening tests were performed with 100 N of force at a frequency of 20 Hz. Data indicate that implants with a DLC coating are more resistant to an applied force (P = 0.002) than are those without the coating. We hope these results will be useful for preventing implant abutment screw loosening.

Stress distributions in maxillary bone surrounding overdenture implants with different overdenture attachments.

In this study, effects of different overdenture attachments on the stress distributions in the maxillary bone surrounding the overdenture implants are studied. Four different types of attachment are considered. They are rigid Dalbo Stud, movable Dalbo Stress Broken, movable Dalro, and movable O-ring attachments. Three-dimensional finite element analysis was conducted with commercial package to obtain the stress distributions in the maxillary bone. Varying the attachment types and angle of inclination of load, the stress distributions in the portions of compact bone and trabecular bone were monitored separately. The analysis was conducted by assuming two different boundary conditions at the interface between cap and overdenture abutment in order to evaluate influence of interface boundary condition on stress distribution in the maxillary bone. They were perfect bonding condition and contact with friction at the interfaces. However, it is preferable to assume perfect bond condition at the interface for rigid type attachment systems and contact with friction at the interface for movable type attachment systems. From the numerical results, it was found that the load transfer mechanism of the implant system is altered significantly by the types of the overdenture attachment and also special care must be taken to assign proper boundary conditions at the interface for the analysis. The movable type Dalro attachment generated the highest maximum effective stress in the maxillary bone among the models under the same inclined loading condition for contact with friction. The rigid type Dalbo Stud attachment generated the smallest maximum effective stress in the maxillary bone among the models under the same inclined loading condition for perfect bonding condition.

A study on the mandibular movement of anterior openbite patients.

The purpose of this study was to compare the mandibular movements of anterior openbite patients using those of normal bite (angle class I) patients, to ascertain which components of mandibular movement are different in the two groups, and to use this information for occlusal treatment. The Saphon Visi-trainer Model 3 and the Denar Pantronic were used to record mandibular movement and a Pantronic survey was performed using an arbitrary hinge axis, according to manufacturer's instructions. The subjects were 43 adults and included 28 subjects presenting with acceptable normal occlusion (angle class I) with no sign of TM dysfunction syndrome (TMD) and 15 subjects with anterior openbite with no anterior guidance. In the anterior openbite group, the average anterior and lateral condylar inclination, maximum opening and the distance between the intercuspal position with retruded contact position distance (anterior-posterior) were significantly lower than normal. The results suggest that in openbite patients the condyle inclination is flatter and the function of the TMJ is more restricted than in the mandibular movements of the normal group. It is hoped that these results will be useful for the correction of the anterior openbite condition.