Microwave fidelity studies by varying antenna coupling.

The fidelity decay in a microwave billiard is considered, where the coupling to an attached antenna is varied. The resulting quantity, coupling fidelity, is experimentally studied for three different terminators of the varied antenna: a hard-wall reflection, an open wall reflection, and a 50 Ω load, corresponding to a totally open channel. The model description in terms of an effective Hamiltonian with a complex coupling constant is given. Quantitative agreement is found with the theory obtained from a modified VWZ approach [J. J. M. Verbaarschot, Phys. Rep. 129, 367 (1985)].

Stable lead isotope compositions in selected coals from around the world and implications for present day aerosol source tracing.

The phasing out of leaded gasoline in many countries around the world at the end of the last millennium has resulted in a complex mixture of lead sources in the atmosphere. Recent studies suggest that coal combustion has become an important source of Pb in aerosols in urban and remote areas. Here, we report lead concentration and isotopic composition for 59 coal samples representing major coal deposits worldwide in an attempt to characterize this potential source. The average concentration in these coals is 35 microg Pb g(-1), with the highest values in coals from Spain and Peru and the lowest in coals from Australia and North America. The 206Pb/207Pb isotope ratios range between 1.15 and 1.24, with less radiogenic Pb in coals from Europe and Asia compared to South and North America. Comparing the Pb isotopic signatures of coals from this and previous studies with those published for Northern and Southern Hemisphere aerosols, we hypothesize that coal combustion might now be an important Pb source in China, the eastern U.S., and to some extent, in Europe but not as yet in other regions including South Africa, South America, and western U.S. This supports the notion that "old Pb pollution" from leaded gasoline reemitted into the atmosphere or long-range transport (i.e., from China to the western U.S.) is important. Comparing the isotope ratios of the coals, the age of the deposits, and Pb isotope evolution models for the major geochemical reservoirs suggests that the PbIC in coals is strongly influenced by the depositional coal forming environment.

A rapid and reliable method for Pb isotopic analysis of peat and lichens by laser ablation-quadrupole-inductively coupled plasma-mass spectrometry for biomonitoring and sample screening.

An analytical protocol for rapid and reliable laser ablation-quadrupole (LA-Q)- and multi-collector (MC-) inductively coupled plasma-mass spectrometry (ICP-MS) analysis of Pb isotope ratios ((207)Pb/(206)Pb and (208)Pb/(206)Pb) in peats and lichens is developed. This technique is applicable to source tracing atmospheric Pb deposition in biomonitoring studies and sample screening. Reference materials and environmental samples were dry ashed and pressed into pellets for introduction by laser ablation. No binder was used to reduce contamination. LA-MC-ICP-MS internal and external precisions were <1.1% and <0.3%, respectively, on both (207)Pb/(206)Pb and (208)Pb/(206)Pb ratios. LA-Q-ICP-MS internal precisions on (207)Pb/(206)Pb and (208)Pb/(206)Pb ratios were lower with values for the different sample sets <14.3% while external precisions were <2.9%. The level of external precision acquired in this study is high enough to distinguish between most modern Pb sources. LA-MC-ICP-MS measurements differed from thermal ionisation mass spectrometry (TIMS) values by 1% or less while the accuracy obtained using LA-Q-ICP-MS compared to solution MC-ICP-MS was 3.1% or better using a run bracketing (RB) mass bias correction method. Sample heterogeneity and detector switching when measuring (208)Pb by Q-ICP-MS are identified as sources of reduced analytical performance.

[Long term results of total skin electron beam therapy (TSEBT) in the treatment of mycosis fungoides]. / Langzeitergebnisse der Ganzhautelektronenbestrahlung (GET) in der Therapie der Mycosis fungoides.

BACKGROUND AND OBJECTIVE: Total skin electron beam therapy (TSEBT) is an important therapeutic option for the treatment of mycosis fungoides. The aim of this study was to find out long term results in 10 patients with the clinical and histological diagnosis of mycosis fungoides. PATIENTS AND METHODS: Between 1982 and 1997 we performed a total skin electron beam therapy in 10 patients. One patient was in stage I A; 5, in stage I B; 3, in stage II B; and one, in stage IV A. The indication for TSEBT was disease progression in spite of PUVA therapy. The doses of electron beam therapy were 30- 36 Gy at 5-6 MeV. In 7 of 10 cases additional local electron beam therapy was given, because individual lesions persisted or recurred after a short time. RESULTS: Complete remission was achieved in 5 patients. The follow- up has been up to 10 years. One patient died of systemic lymphoma 10 years after electron beam therapy. Three patients died of illnesses unrelated to mycosis fungoides. One patient developed a high grade T-cell lymphoma. CONCLUSIONS: Total skin electron beam therapy is a very effective, but technically difficult therapy for mycosis fungoides, especially in stage I B and II B. Particularly interesting has been the long duration of complete response of three patients, who had follicular mucinosis preceding their mycosis fungoides.

Dosimetry of rotational partial-skin electron irradiation.

BACKGROUND AND PURPOSE: Often, the most appropriate treatment for superficially and extensively spreading tumors of the skin is to use electron irradiation at enlarged distances. Rotational skin electron irradiation is a proven method for the treatment of the entire skin surface. We here report modifications of this technique in the set-up of partial-skin electron irradiation and the results of dosimetric examinations with regard to optimal shielding, dose profiles and depth dose curves under various irradiation conditions. MATERIALS AND METHODS: Irradiation was performed using electron beams with nominal energies of 6 MeV from a linear accelerator. The phantom was located on a rotating platform at a source-surface distance SSD=300 cm. A horizontal slit aperture (height: 32 cm) within a 2 cm thick polymethylmethacrylate (PMMA) shielding plate near the phantom was used to define the size of the irradiated region. Influences on dose distributions due to scattering processes on the PMMA edges were investigated using a flat ionization chamber and films. Absolute dose measurements and film calibration were made with the flat chamber. The quality of bremsstrahlung radiation behind the shielding was determined with a thimble ionization chamber in the phantom. RESULTS AND CONCLUSIONS: The results of rotational partial-skin electron irradiation reveal some of the investigated shielding geometries to be optimal. Depth dose distributions and dose rates correspond to the results obtained in total skin electron rotational irradiation. It is possible to apply the dose superficially in the first millimeters of the skin; the dose maximum is located at a depth of 0-2 mm, the 80% isodose at 9 mm. The amount of bremsstrahlung contamination is 2.5%. The local amount of absorbed dose per monitor unit depends strongly on patient/phantom cross-section geometry. At our institute, rotational partial-skin electron irradiation was implemented into clinical routine in 1997.

A simple and reliable method to simulate multileaf-plans.

To combine conformity of the irradiation with time effectiveness during treatment, the use of multileaf collimators has become more and more common. However, the simulation of the leaf positions is rather difficult compared with metal blocks. We developed a new method, utilizing an acrylic template in which the contour produced by the leaves is machined in the form of a 1 mm groove by a computerized numerically controlled milling machine. This template is then inserted into a mount attached to the simulator. The main advantages are the errorfree, direct communication from the therapy planning system to the milling machine via a network, the possibility to transfer the contour to the skin, and the documentation on the simulation film. The use of templates is reliable and, e.g. the costs of the materials are lower than for block simulation.

Comparison of calibration procedures for 192Ir high-dose-rate brachytherapy sources.

PURPOSE: To compare the efficacy of different calibration procedures for 192Ir high-dose-rate (HDR) brachytherapy sources and to determine their suitability in clinical practice. In addition the manufacturer's calibration is compared with our experimental measurements so that the accuracy of the source strength on the manufacturer certificate which is supplied with each new 192Ir source can be accessed. METHODS AND MATERIALS: We compared three types of calibration system: well-type chambers (HDR-1000 and SDS), cylindrical phantom, and plate phantom. The total number of measurements we obtained was 365. The number of sources used for the calibration procedure comparison was 20 and the number used for comparison with the manufacturer's calibration was 46. This study was made during the period 1989-1997. Also, Physikalisch-Technische Bundesanstalt (PTB) calibrated one of our sources using their PTB protocol so that the results could be compared with our own. RESULTS: The sensitivity of each system on scattering from the room walls was studied. It was found that different minimum lateral distances from the walls were required for the different systems tested: 15 cm and 25 cm for the well-type chambers, 75 cm for the cylindrical phantom, and 13 cm for the plate phantom. The minimum thickness required to reach phantom scattering saturation for the plate phantom setup is 24 cm. The influence of the applicator material used in the calibration setup was found to be 1.7% for the stainless steel dosimetry applicator compared to the plastic 5F applicator. The accuracy of source positioning within the applicator can lead to dosimetric errors of +/-1.2% for the radial distance of 8.0 cm used with both solid phantoms. The change in the response for both well-type chambers was only 0.1% for changes in the source position within +/-7.5 mm around the response peak. Good agreement was found between all dosimetry systems included in our study. Taking the HDR-1000 well-type chamber results as a reference, we observed percentage root mean square (RMS) values of 0.11% for the SDS well-type chamber, 0.44% for the cylindrical, and 0.60% for the plate phantom setup. A comparison of our results using the cylindrical phantom with those of the manufacturer showed a percentage RMS value of 3.3% with a percentage fractional error range of -13.0% to +6.0%. The comparison of our calibration results with those of PTB gave deviations less than 0.4% for all systems. CONCLUSIONS: Our results have shown that with careful use of all calibration system protocols an accurate determination of source strength can be obtained. However, the manufacturer's calibration is not accurate enough on its own, and it should be mandatory for clinics to always measure the source strength of newly delivered 192Ir brachytherapy sources. The influence of the applicator material, metal or plastic, should always be taken into account.

[A multileaf collimator: additional quality assurance in a GE linear accelerator]. / Multileafkollimator: erweiterte Qualitätssicherung an einem GE-Linearbeschleuniger.

BACKGROUND: In comparison to a conventional collimator, a multileaf collimator demands a great deal of quality assurance procedures due to its large number of leaves. A concept for daily quality assurance is presented, mainly concerning the positioning accuracy of the leaves. MATERIAL AND METHODS: Two leaf configurations including maximal opening as well as overtravel of single leaves, at a maximal opening of the jaws, are transmitted online in daily exchange from our record- and verify system to the linac. Aiming at a special test phantom a visual control of the positioning accuracy is performed. The leaf positioning is documented by an electronic portal imaging system and is compared with a reference shot by superposition of a grid. RESULTS: This method of quality assurance offers a fast and effective possibility to guarantee the proper function of the whole system by simulating the routine treatment situation. CONCLUSIONS: Compared to a conventional collimator only a slightly greater workload is needed for quality assurance of a multileaf collimator.

[A quality assurance program of simulators in radiation therapy. 2. Extent and results of long-term quality assurance test on a therapy simulator]. / Ein Qualitätssicherungsprogramm für Simulatoren in der Strahlentherapie. Teil 2: Umfang und Ergebnisse langjähriger Konstanzprüfungen an einem Therapiesimulator.

BACKGROUND: Since 1990 we follow a quality assurance program with periodical tests of functional performance values of a 16-year-old simulator. MATERIAL AND METHOD: For this purpose we adopted and modified German standards for quality assurance on linear accelerators and international standards elaborated for simulators (International Electrotechnical Commission). The tests are subdivided into daily visual checks (light field indication, optical distance indicator, isocentre-indicating devices, indication of gantry and collimator angles) and monthly and annually tests of relevant simulator parameters. Some important examples demonstrate the small variation of parameters over 6 years: position of the light field centre when rotating the collimator, diameter of the isocentre circle when rotating the gantry, accuracy of the isocentre indication device, and coincidence of light field and simulated radiation field. RESULTS: As an important result we can state, that by these rigid periodic tests it was possible to detect and compensate deteriorations of simulators quality rapidly. CONCLUSIONS: Technical improvements and specific calling-in of maintenance personnel whenever felt appropriate provided performance characteristics of our old simulator which are required by international recommendations as a basis for modern radiotherapy.

Paclitaxel and simultaneous radiation in locally advanced stage IIIA/B non-small cell lung cancer: a clinical phase I study.

Paclitaxel (Taxol; Bristol-Myers Squibb Company, Princeton, NJ) is one of the most active single agents for the treatment of non-small cell lung cancer, with response rates of 21% to 24%. We present a phase I study with paclitaxel and simultaneous radiation in previously untreated, locally advanced, inoperable, stage IIIA/B non-small cell lung cancer. The aims of the study were to determine the maximum tolerated dose, define the safety and toxicity, and obtain preliminary data about the activity of the combined modality. Patients received a fixed dose of radiotherapy (1.8 Gy/d, 5 days a week for 6.5 weeks, for a total dose of 59.4 Gy) and concomitant chemotherapy with paclitaxel 45 mg/m2 days 1, 8, and 15 in level 1; days 1, 8, 15, 22, and 29 in level 2; and days 1, 8, 15, 22, 29, 36, and 43 in level 3. The paclitaxel dosage was increased to 55 mg/m2 on days 1, 8, 15, 22, 29, 36, and 43 in level 4. Paclitaxel was administered as a 3-hour continuous intravenous infusion. Dexamethasone, clemastine, and ranitidine were given for hypersensitivity prophylaxis. Twenty-two patients (18 men and four women) entered the study; their median age was 66.5 years (age range, 38 to 74 years). Disease stage was IIIA in six of 22 patients and stage IIIB in 16. Six patients were treated at level 1, five at level 2, five at level 3, and six at level 4. There were 18 patients evaluable for toxicity and response. Side effects generally were moderate during the treatment period. One patient withdrew by request after the first course, one patient died of tumor bleeding after five courses, one patient died of progressive disease (lymphangiosis carcinomatosa of both lungs) after the sixth course, and one patient is too early for evaluation. Among the 18 patients evaluable for response, there were one complete and 10 partial remissions; seven patients reached a minor response. It is concluded that the therapy was well tolerated in these patients. Importantly, no severe adverse events were observed that could be associated with paclitaxel or radiotherapy. This combined modality appears to be a practicable and effective treatment of non-small cell lung cancer. The maximum tolerated dose has not yet been reached, and dose escalation is planned.

[Immunoassays for determination of glycoprotein specificity, serum quantitation and determination of binding sites of granulocyte antibodies]. / Immunoassays zur Bestimmung der Glykoproteinspezifität, des Serumgehalts und der Bindungsstellenzahl von granulozytären Antikörpern.

For the characterization of granulocyte antibodies an antigen capture assay and a method based upon quantitative determination of eluted IgG were developed. These assays allowed the quantitation of granulocyte antibodies in sera, the determination of their binding sites and their glycoprotein specificity, and the identification of NA-specific antibodies in sera containing mixtures of granulocyte antibodies.

Analysis of granulocyte-reactive antibodies using an immunoassay based upon monoclonal-antibody-specific immobilization of granulocyte antigens.

To detect human granulocyte-reactive antibodies, a glycoprotein-specific enzyme immunoassay for platelet antibodies was adapted for the use of granulocytes as target cells. Peripheral blood granulocytes were simultaneously incubated with a monoclonal antibody (mAb) and the serum to be investigated. After solubilization, aliquots of the cell lysate were transferred to plastic tubes coated with goat anti-mouse antibodies. Following immobilization of the trimolecular (mAb-glycoprotein-human antibody) complex it was detected by addition of enzyme-labelled goat anti-human antibodies using a luminescence technique. This assay allowed identification of different granulocyte-reactive antibodies present in the same sample without the need for complicated absorption studies. Alloantibodies against HLA and the granulocyte-specific NA antigens as well as isoantibodies against the Fc-gamma-receptor III (FcRIII) were detectable using mAb-specific immobilization of granulocyte antigens (MAIGA). Binding of autoantibodies to the FcRIII and to the CD 11b/CD18 complex could be shown.

[A quality assurance program for simulators in radiotherapy. 1: The universal phantom for quality control of therapy simulators and teletherapy equipment]. / Ein Qualitätssicherungsprogramm für Simulatoren in der Strahlentherapie. Teil 1: Das Universalphantom zur Qualitätskontrolle an Therapiesimulatoren und Teletherapiegeräten.

A new phantom is described which shall be utilized to check geometric parameters of simulators and therapy units. Because of its mechanical assembly technique construction it is possible to use any part of the system fixed on a base plate which has to be adjusted only once. The application of the different parts of the phantom will be illustrated by some check examples on simulators and linacs. An intercomparison of quality control data referring to therapy simulators in various centres of South Germany has been started whereby the usability and reliability of the phantom also will be tested. The preliminary results give objective reasons for its suitability to study generally the performance tolerances of simulators with regard to quality assurance in radiotherapy.

[The surface dosage in the radiotherapy of a small breast carcinoma with 6-MV x-rays. A contribution to quality assurance in radiotherapy]. / Oberflächendosis bei Strahlentherapie des kleinen Mammakarzinoms mit 6-MV-Röntgenstrahlen. Ein Beitrag zur Qualitätssicherung in der Strahlentherapie.

Radiation treatment of breast cancer with high-energy X-rays in breast conserving therapy tends to an under-dosage of the skin region. Results of our measurements with patients and in water demonstrate that the skin receives only 40% of the reference dose applying tangential opposed wedged fields with 6 MV X-rays. Doing so we must accept a dose inhomogeneity of about 60% in the target volume. That may cause an increased recurrence rate especially for superficially situated tumors and/or in the case of intraoperatively disseminated tumor cells. We show that utilizing bolus material of only 5 mm water equivalence on the skin above the tumor bed reduces the dose inhomogeneity to 8%.

[Mounting devices for screening blocks on the linear accelerator--the drawbacks and modifications]. / Haltevorrichtungen für Abschirmblöcke am Linearbeschleuniger--Mängel und Modifikationen.

Block mounting devices for linacs--drawbacks and modifications: Shielding blocks are often used in radiotherapy. They are fixed on the linac's head by means of standard accessory mounting devices. The disadvantages of these parts are discussed and two modifications are presented: One device with adjustable focus-support distance for standard lead blocks and another with gliding planes to insert easily the heavy individually formed shielding blocks. Errors in mounting of all these devices are very dangerous, so we developed a simple locking lever providing a high security.

[A computer-supported method for the direct production of shielding blocks and compensators for radiotherapy]. / Computergestützte Methode zur unmittelbaren Herstellung von Abschirmblöcken und Kompensatoren für die Strahlentherapie.

The homogeneous irradiation of irregularly shaped targets with high doses and the simultaneous protection of the equally irregular surrounding high risk regions can be carried out with the help of shielding blocks and compensation filters specially cut for individual use. The machines offered on the market that help in their production have serious drawbacks in spite of the advanced technology used. These machines with limited usage are not only expensive but also require personnel to control the several steps the production of the blocks and filters involves. Safer radiotherapy however demands a more intensive use of these protective measures. However, it is now possible to overcome the drawbacks we have mentioned. The projection of the contours of the block marked on the X-ray on the shielding blocks can be carried out directly with the help of the computer that directs the radiotherapy. This computer could be connected to a multipurpose CNC milling machine. Similarly, one could, in the near future, use the data from computed tomograms in the computer used to plan the radiotherapy to mould three dimensional compensation filters. The cutting out of the negative moulds from Styrodur, the casting with fluid metal alloys, the imprecision that follows, as well as the health hazards and environmental pollution attached to his process could then be avoided, not to speak of the possibility of total reutilization of the rests. The positioning of the block ensemble can follow effortlessly and with precision on the lucite plates which have been drilled to accommodate the blocks.