Electrochemical sensing platform based on screen-printed carbon electrode modified with plasma polymerized acrylonitrile nanofilms for determination of bupropion.

A original electrochemical sensing platform, based on screen-printed electrodes modification with plasma polymerized acrylonitrile (pp-AN) nanofilms is proposed. For that purpose, plasma-enhanced chemical vapor deposition (PECVD) process was conducted in a parallel plate (13.56 MHz) plasma reactor for 2 min with discharge power of 10 W. The surface topography and electrochemical properties of prepared sensors were investigated by X-ray photoelectron spectroscopy, scanning electron microscopy, energy dispersion spectroscopy, electrochemical impedance spectroscopy, and cyclic voltammetry. The electrochemical characteristics of pp-AN/SPCE and pp-AN/SPAuE sensors was investigated for model redox pair [Fe(CN)6]4-/3-. Conducted research confirmed the excellent chemical stability, durability, wide potential window, high signal-to-noise (S/N) ratio, and, most importantly, the ability to standardize the sensors. The pp-AN/SPCE sensor was applied to the determination of bupropion, an antidepressant drug whose intake has increased dramatically during the COVID-19 pandemic. The voltammetric response of pp-AN/SPCE for BUP was linear in two concentration ranges of 0.63-10.0 and 10.0-50.0 µmol L-1, with a detection limit of 0.21 µmol L-1. Satisfactory recoveries (96.2-102%) and good precision (RSD below 4.1%) obtained for environmental and biological samples confirmed the usefulness of the sensor for the analysis of various kinds of samples.

Electrochemical Sensing of Pb2+ and Cd2+ Ions with the Use of Electrode Modified with Carbon-Covered Halloysite and Carbon Nanotubes.

A novel voltammetric method for the sensitive and selective determination of cadmium and lead ions using screen-printed carbon electrodes (SPCEs) modified with carbon-deposited natural halloysite (C_Hal) and multi-walled carbon nanotubes (MWCNTs) was developed. The electrochemical properties of the proposed sensor were investigated by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV), while the morphology and structure were established by scanning electron microscopy (SEM) and X-ray powder diffraction (XRD). A two-factorial central composite design (CCD) was employed to select the composition of the nanocomposite modifying the electrode surface. The optimal measuring parameters of differential pulse anodic stripping voltammetry (DPASV) used for quantitative analysis were established with the Nelder-Mead simplex method. In the analytical investigation of Cd(II) and Pb(II) ions by DPASV, the MWCNTs/C_Hal/Nafion/SPCE exhibited a linear response in the concentration range of 0.1-10.0 µmol L-1 (for both ions) with a detection limit of 0.0051 and 0.0106 µmol L-1 for Pb(II) and Cd(II), respectively. The proposed sensor was successfully applied for the determination of metal ions in different natural water and honey samples with recovery values of 96.4-101.6%.

The Use of an Acylhydrazone-Based Metal-Organic Framework in Solid-Contact Potassium-Selective Electrode for Water Analysis.

A solid-contact ion-selective electrode was developed for detecting potassium in environmental water. Two versions of a stable cadmium acylhydrazone-based metal organic framework, i.e., JUK-13 and JUK-13_H2O, were used for the construction of the mediation layer. The potentiometric and electrochemical characterizations of the proposed electrodes were carried out. The implementation of the JUK-13_H2O interlayer is shown to improve the potentiometric response and stability of measured potential. The electrode exhibits a good Nernstian slope (56.30 mV/decade) in the concentration range from 10-5 to 10-1 mol L-1 with a detection limit of 2.1 µmol L-1. The long-term potential stability shows a small drift of 0.32 mV h-1 over 67 h. The electrode displays a good selectivity comparable to ion-selective electrodes with the same membrane. The K-JUK-13_H2O-ISE was successfully applied for the determination of potassium in three certified reference materials of environmental water with great precision (RSD < 3.00%) and accuracy (RE < 3.00%).

A Perspective of the Comprehensive and Objective Assessment of Analytical Methods Including the Greenness and Functionality Criteria: Application to the Determination of Zinc in Aqueous Samples.

The recently proposed concept of White Analytical Chemistry (WAC), referring to the Red-Green-Blue color model, combines ecological aspects (green) with functionality (red and blue criteria), presenting the complete method as "white". However, it is not easy to carry out an overall quantitative evaluation of the analytical method in line with the WAC idea in an objective manner. This paper outlines the perspective of the future development of such a possibility by attempting to answer selected questions about the evaluation process. Based on the study consisting in the evaluation of selected model methods by a group of 12 independent analysts, it was shown how well individual criteria are assessed, whether the variability of assessments by different people is comparable for each criterion, how large it is, and whether averaging the scores from different researchers can help to choose the best method more objectively.

A voltammetric sensor based on mixed proton-electron conducting composite including metal-organic framework JUK-2 for determination of citalopram.

A voltammetric sensor has been developed based on glassy carbon electrode (GCE) modification with nanocomposite consisting of manganese-based metal-organic framework (JUK-2), multi-walled carbon nanotubes (MWCNTs), and gold nanoparticles (AuNPs) for detection of citalopram (CIT). The composition and morphology of JUK-2-MWCNTs-AuNPs/GCE were characterized by X-ray powder diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), energy dispersion spectroscopy (EDS), and scanning electron microscopy (SEM). The electrochemical properties investigated using electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) indicated that the fabricated hybrid material exhibits the properties of mixed ion-electron conductor (MIEC). Using staircase voltammetry (SCV), under optimized conditions, the fabricated sensor shows a linear response in three CIT concentration ranges, 0.05-1.0, 1.0-10.0 and 15.0-115.0 µmol L-1, with a detection limit of 0.011 µmol L-1. The JUK-2-MWCNTs-AuNPs/GCE was successfully employed for the determination of CIT in pharmaceutical, environmental waters, and biological samples with satisfactory recoveries (98.6-104.8%).

Employment of electrostriction phenomenon for label-free electrochemical immunosensing of tetracycline.

The presented work describes a simple label-free electrochemical immunosensor for the determination of tetracycline (TC). The functioning of the sensor was based on the electrostriction of a antibody-terminated thiol layer self-assembled on a gold electrode surface, serving as a dielectric membrane. The intensity of electrostriction was correlated with the amount of TC captured through an affinity reaction with its specific antibody, and was followed in the form of capacitance-potential curves. The process of the immunosensor construction was optimized using electrochemical impedance spectroscopy (EIS). The chemisorption time of the thiol, the duration of the TCAb immobilization and its concentration were optimized. The developed immunosensor exhibited a linear response in two concentration ranges: from 0.95 to 10 µmol L-1 and from 10 to 140 µmol L-1, with the mean sensitivity of 6.27 nF µmol-1 L (88.67 nF µmol-1 L cm-2) and 0.56 nF µmol-1 L (7.84 nF µmol-1 L cm-2), respectively. The limit of detection was evaluated as 28 nmol L-1. The specificity of the proposed sensor toward other antibiotics, amoxicillin and ciprofloxacin, was examined. The immunosensor was successfully employed to quantify TC in a tablet form and in a matrix of river water.

Electrochemical Immunosensors for Antibiotic Detection.

Antibiotics are an important class of drugs destined for treatment of bacterial diseases. Misuses and overuses of antibiotics observed over the last decade have led to global problems of bacterial resistance against antibiotics (ABR). One of the crucial actions taken towards limiting the spread of antibiotics and controlling this dangerous phenomenon is the sensitive and accurate determination of antibiotics residues in body fluids, food products, and animals, as well as monitoring their presence in the environment. Immunosensors, a group of biosensors, can be considered an attractive tool because of their simplicity, rapid action, low-cost analysis, and especially, the unique selectivity arising from harnessing the antigen-antibody interaction that is the basis of immunosensor functioning. Herein, we present the recent achievements in the field of electrochemical immunosensors designed to determination of antibiotics.

Bioelectrocatalytic and electrochemical cascade for phosphate sensing with up to 6 electrons per analyte molecule.

Despite the availability of numerous electroanalytical methods for phosphate quantification, practical implementation in point-of-use sensing remains virtually nonexistent because of interferences from sample matrices or from atmospheric O2. In this work, phosphate determination is achieved by the purine nucleoside phosphorylase (PNP) catalyzed reaction of inosine and phosphate to produce hypoxanthine which is subsequently oxidized by xanthine oxidase (XOx), first to xanthine and then to uric acid. Both PNP and XOx are integrated in a redox active Os-complex modified polymer, which not only acts as supporting matrix for the bienzymatic system but also shuttles electrons from the hypoxanthine oxidation reaction to the electrode. The bienzymatic cascade in this second generation phosphate biosensor selectively delivers four electrons for each phosphate molecule present. We introduced an additional electrochemical process involving uric acid oxidation at the underlying electrode. This further enhances the anodic current (signal amplification) by two additional electrons per analyte molecule which mitigates the influence of electrochemical interferences from the sample matrix. Moreover, while the XOx catalyzed reaction is sensitive to O2, the uric acid production and therefore the delivery of electrons through the subsequent electrochemical process are independent of the presence of O2. Consequently, the electrochemical process counterbalances the O2 interferences, especially at low phosphate concentrations. Importantly, the electrochemical uric acid oxidation specifically reports on phosphate concentration since it originates from the product of the bienzymatic reactions. These advantageous properties make this bioelectrochemical-electrochemical cascade particularly promising for point-of-use phosphate measurements.

Flow manifold for chemical H-point standard addition method implemented to electrochemical analysis based on the capacitance measurements.

The paper presents a novel analytical method for electrochemical potassium determination using gold electrodes with self-assembled thiol monolayers (SATMs) deposited on its surface. The whole analytical procedure was carried out in a dedicated flow manifold using capacitance detection mode. The terminal functional groups on the surface of the dielectric monolayer interacts selectively with the analyte, changing the thickness of the layer depending on the amount of the analyte and the applied voltage, resulting in a change in the registered dielectric capacitance. New calibration approach based on the Chemical H-point Standard Addition Method (C-HPSAM), allowing both specific (proportional) and unspecific (constant) interference effects caused by sodium ions to be corrected, was applied. The calibration method is based on the registration of the calibration graphs by the standard addition method (SAM) three times in such different chemical conditions, which are able to differentiate the slope of each graph. The C-HPSAM was applied for the first time in electrochemical analysis. As a chemical parameter differentiating the sensitivity of the calibration graphs, the concentration of ionic strength stabilizer (ethylenediamine) was used. In order to improve the analytical procedure, to make it faster and automated, the dedicated flow system was applied. The constructed flow system was composed of several modules individually dedicated to the appropriate step of the whole analytical procedure: electrochemical cleaning of work electrode surface, adsorption of SATMs and analytical calibration. The calibration curves were obtained in the range of 0.1-0.9 mmol L-1 with good linearity (R2 = 0.996 ±â€¯0.001) and the LOD and LOQ of 28.6 and 85.8 µmol L-1, respectively. The proposed method was employed for potassium determination in highly mineralized water, juice and pharmaceutical samples without any special pretreatment.

Novel electroanalytical method based on the electrostriction phenomenon and its application to determination of Cr(VI) by the flow injection technique.

The electrostriction phenomenon is observed in membranes of thickness in the nanometer range, e.g. bilayer lipid membranes or self-assembled monolayers. Strong electrical field of 105-106V/cm in intensity appears when applying the potential lower than 1V to these membranes. Electrostatic forces change the dimensions of a dielectric, hence the membrane compression and decrease in thickness are observed. As a result, increase in the membrane capacitance is recorded. The presented work covers development and application of a new analytical method based on the innovative capacitance-to-frequency conversion method and flow technique. Construction of the novel flow manifold designed for realization of the whole analytical procedure of chromium(VI) determination with the use of capacitance measurements and its operating rules are shown. The main element of the system is a specially designed measurement cell for realization of chromium determination using a three-electrode system. Au electrode with a self-assembled monolayer of thiols grafted with functional groups selectively interacting with the analyte is employed as a dielectric layer. Ag/AgCl electrode and Pt one are used as a reference and auxiliary electrode, respectively. Accuracy, repeatability and reproducibility of the proposed analytical procedure were tested in determination of Cr(VI) in synthetic solutions and environmental water matrices spiked with the analyte. Benefits and drawbacks of the developed manifold were critically discussed.

Mesoporous carbon-containing voltammetric biosensor for determination of tyramine in food products.

A voltammetric biosensor based on tyrosinase (TYR) was developed for determination of tyramine. Carbon material (multi-walled carbon nanotubes or mesoporous carbon CMK-3-type), polycationic polymer-i.e., poly(diallyldimethylammonium chloride) (PDDA), and Nafion were incorporated into titania dioxide sol (TiO2) to create an immobilization matrix. The features of the formed matrix were studied by scanning electron microscopy (SEM) and cyclic voltammetry (CV). The analytical performance of the developed biosensor was evaluated with respect to linear range, sensitivity, limit of detection, long-term stability, repeatability, and reproducibility. The biosensor exhibited electrocatalytic activity toward tyramine oxidation within a linear range from 6 to 130 µM, high sensitivity of 486 µA mM(-1) cm(-2), and limit of detection of 1.5 µM. The apparent Michaelis-Menten constant was calculated to be 66.0 µM indicating a high biological affinity of the developed biosensor for tyramine. Furthermore, its usefulness in determination of tyramine in food product samples was also verified. Graphical abstract Different food samples were analyzed to determine tyramine using biosensor based on tyrosinase.

Tyrosinase biosensor for benzoic acid inhibition-based determination with the use of a flow-batch monosegmented sequential injection system.

Amperometric tyrosinase based biosensor for benzoic acid determination with the use of a flow-batch monosegmented sequential injection system is proposed. The functioning of the biosensor is based on the inhibition effect of benzoic acid on the biocatalytic activity of tyrosinase, polyphenol oxidase. In the biosensor, tyrosinase is entrapped in titania gel modified with multiwalled carbon nanotubes (MWCNT) and Nafion. The procedure of optimization of experimental conditions affecting the biosensor response, as well as its analytical characteristics and results of the approach verification using synthetic samples and a reference material are presented. The developed biosensor exhibits linear range up to 2.46µM, good sensitivity toward benzoic acid (1.06µAµM(-1)) and low detection limit (0.03µM). The approach has been applied to benzoic acid determination in a real beverage sample giving the result consistent with that obtained using the HPLC method.

Influence of Nafion in Titania Sol-gel Matrix on Analytical Characteristic of Amperometric Phenol Biosensor Based on Tyrosinase.

For detection of phenolic compounds a simple amperometric biosensor based on tyrosinase immobilized in titania sol-gel/Nafion composite was employed. Titania sol-gel was mixed with Nafion (v/v) in ratios 1:1 (TiO2/NF-1/1) and 2:1 (TiO2/NF-2/1), v/v. Morphology of immobilization composites was characterized by scanning electron microscopy. Analytical performance of biosensors with Nafion and based only on titania sol-gel (TiO2) was compared. Apart from sensitivity, linear range and detection limit also repeatability, reproducibility and storage stability were evaluated. The biosensor based on titania sol mixed with Nafion in ratio 1:1 (v/v) exhibited the best analytical parameters in terms of sensitivity: 2.84 µA L µmol-1, corresponding LOD, 0.056 µmol L-1, and the long-term stability within 20 days: it retained 80% of initial activity.