Mid-infrared Imaging Using Strain-Relaxed Ge1-xSnx Alloys Grown on 20 nm Ge Nanowires.

Germanium-tin (Ge1-xSnx) semiconductors are a front-runner platform for compact mid-infrared devices due to their tunable narrow bandgap and compatibility with silicon processing. However, their large lattice parameter has been a major hurdle, limiting the quality of epitaxial layers grown on silicon or germanium substrates. Herein, we demonstrate that 20 nm Ge nanowires (NWs) act as effective compliant substrates to grow extended defect-free Ge1-xSnx alloys with a composition uniformity over several micrometers along the NW growth axis without significant buildup of the compressive strain. Ge/Ge1-xSnx core/shell NWs with Sn content spanning the 6-18 at. % range are achieved and processed into photoconductors exhibiting a high signal-to-noise ratio at room temperature with a cutoff wavelength in the 2.0-3.9 µm range. The processed NW devices are integrated in an uncooled imaging setup enabling the acquisition of high-quality images under both broadband and laser illuminations at 1550 and 2330 nm without the lock-in amplifier technique.

Nuclear Spin-Depleted, Isotopically Enriched 70 Ge/28 Si70 Ge Quantum Wells.

The p-symmetry of the hole wavefunction is associated with a weaker hyperfine interaction, which makes hole spin qubits attractive candidates to implement quantum processors. However, recent studies demonstrate that hole qubits are still very sensitive to nuclear spin bath, thus highlighting the need for nuclear spin-free germanium (Ge) qubits to suppress this decoherence channel. Herein, this work demonstrates the epitaxial growth of 73 Ge- and 29 Si-depleted, isotopically enriched 70 Ge/silicon-germanium (SiGe) quantum wells. The growth is achieved by reduced pressure chemical vapor deposition using isotopically purified monogermane 70 GeH4 and monosilane 28 SiH4 with an isotopic purity higher than 99.9% and 99.99%, respectively. The quantum wells consist of a series of 70 Ge/SiGe heterostructures grown on Si wafers. The isotopic purity is investigated using atom probe tomography (APT) following an analytical procedure addressing the discrepancies caused by the overlap of isotope peaks in mass spectra. The nuclear spin background is found to be sensitive to the growth conditions with the lowest concentration of 73 Ge and 29 Si is below 0.01% in the Ge well and SiGe barriers. The measured average distance between nuclear spins reaches 3-4 nm in 70 Ge/28 Si70 Ge, which is an order of magnitude larger than in natural Ge/SiGe heterostructures. The spread of the hole wavefunction and the residual nuclear spin background in APT voluminals comparable to the size of realistic quantum dots are also discussed.

Short-wave infrared cavity resonances in a single GeSn nanowire.

Nanowires are promising platforms for realizing ultra-compact light sources for photonic integrated circuits. In contrast to impressive progress on light confinement and stimulated emission in III-V and II-VI semiconductor nanowires, there has been no experimental demonstration showing the potential to achieve strong cavity effects in a bottom-up grown single group-IV nanowire, which is a prerequisite for realizing silicon-compatible infrared nanolasers. Herein, we address this limitation and present an experimental observation of cavity-enhanced strong photoluminescence from a single Ge/GeSn core/shell nanowire. A sufficiently large Sn content ( ~ 10 at%) in the GeSn shell leads to a direct bandgap gain medium, allowing a strong reduction in material loss upon optical pumping. Efficient optical confinement in a single nanowire enables many round trips of emitted photons between two facets of a nanowire, achieving a narrow width of 3.3 nm. Our demonstration opens new possibilities for ultrasmall on-chip light sources towards realizing photonic-integrated circuits in the underexplored range of short-wave infrared (SWIR).

Atomic fluctuations lifting the energy degeneracy in Si/SiGe quantum dots.

Electron spins in Si/SiGe quantum wells suffer from nearly degenerate conduction band valleys, which compete with the spin degree of freedom in the formation of qubits. Despite attempts to enhance the valley energy splitting deterministically, by engineering a sharp interface, valley splitting fluctuations remain a serious problem for qubit uniformity, needed to scale up to large quantum processors. Here, we elucidate and statistically predict the valley splitting by the holistic integration of 3D atomic-level properties, theory and transport. We find that the concentration fluctuations of Si and Ge atoms within the 3D landscape of Si/SiGe interfaces can explain the observed large spread of valley splitting from measurements on many quantum dot devices. Against the prevailing belief, we propose to boost these random alloy composition fluctuations by incorporating Ge atoms in the Si quantum well to statistically enhance valley splitting.

Electronic Structure and Epitaxy of CdTe Shells on InSb Nanowires.

Indium antimonide (InSb) nanowires are used as building blocks for quantum devices because of their unique properties, that is, strong spin-orbit interaction and large Landé g-factor. Integrating InSb nanowires with other materials could potentially unfold novel devices with distinctive functionality. A prominent example is the combination of InSb nanowires with superconductors for the emerging topological particles research. Here, the combination of the II-VI cadmium telluride (CdTe) with the III-V InSb in the form of core-shell (InSb-CdTe) nanowires is investigated and potential applications based on the electronic structure of the InSb-CdTe interface and the epitaxy of CdTe on the InSb nanowires are explored. The electronic structure of the InSb-CdTe interface using density functional theory is determined and a type-I band alignment is extracted with a small conduction band offset ( ⩽0.3 eV). These results indicate the potential application of these shells for surface passivation or as tunnel barriers in combination with superconductors. In terms of structural quality, it is demonstrated that the lattice-matched CdTe can be grown epitaxially on the InSb nanowires without interfacial strain or defects. These shells do not introduce disorder to the InSb nanowires as indicated by the comparable field-effect mobility measured for both uncapped and CdTe-capped nanowires.

Probing embedded topological modes in bulk-like GeTe-Sb2Te3 heterostructures.

The interface between topological and normal insulators hosts metallic states that appear due to the change in band topology. While topological states at a surface, i.e., a topological insulator-air/vacuum interface, have been studied intensely, topological states at a solid-solid interface have been less explored. Here we combine experiment and theory to study such embedded topological states (ETSs) in heterostructures of GeTe (normal insulator) and [Formula: see text] [Formula: see text] (topological insulator). We analyse their dependence on the interface and their confinement characteristics. First, to characterise the heterostructures, we evaluate the GeTe-Sb[Formula: see text]Te[Formula: see text] band offset using X-ray photoemission spectroscopy, and chart the elemental composition using atom probe tomography. We then use first-principles to independently calculate the band offset and also parametrise the band structure within a four-band continuum model. Our analysis reveals, strikingly, that under realistic conditions, the interfacial topological modes are delocalised over many lattice spacings. In addition, the first-principles calculations indicate that the ETSs are relatively robust to disorder and this may have practical ramifications. Our study provides insights into how to manipulate topological modes in heterostructures and also provides a basis for recent experimental findings [Nguyen et al. Sci. Rep. 6, 27716 (2016)] where ETSs were seen to couple over thick layers.

Design and Characterization of a Sharp GaAs/Zn(Mn)Se Heterovalent Interface: A Sub-Nanometer Scale View.

The distribution of magnetic impurities (Mn) across a GaAs/Zn(Mn)Se heterovalent interface is investigated combining three experimental techniques: Cross-Section Scanning Tunnel Microscopy (X-STM), Atom Probe Tomography (APT), and Secondary Ions Mass Spectroscopy (SIMS). This unique combination allowed us to probe the Mn distribution with excellent sensitivity and sub-nanometer resolution. Our results show that the diffusion of Mn impurities in GaAs is strongly suppressed; conversely, Mn atoms are subject to a substantial redistribution in the ZnSe layer, which is affected by the growth conditions and the presence of an annealing step. These results show that it is possible to fabricate a sharp interface between a magnetic semiconductor (Zn(Mn)Se) and high quality GaAs, with low dopant concentration and good optical properties.

Ballistic Phonons in Ultrathin Nanowires.

According to Fourier's law, a temperature difference across a material results in a linear temperature profile and a thermal conductance that decreases inversely proportional to the system length. These are the hallmarks of diffusive heat flow. Here, we report heat flow in ultrathin (25 nm) GaP nanowires in the absence of a temperature gradient within the wire and find that the heat conductance is independent of wire length. These observations deviate from Fourier's law and are direct proof of ballistic heat flow, persisting for wire lengths up to at least 15 µm at room temperature. When doubling the wire diameter, a remarkably sudden transition to diffusive heat flow is observed. The ballistic heat flow in the ultrathin wires can be modeled within Landauer's formalism by ballistic phonons with an extraordinarily long mean free path.

Kinetic Control of Morphology and Composition in Ge/GeSn Core/Shell Nanowires.

The growth of Sn-rich group-IV semiconductors at the nanoscale can enrich the understanding of the fundamental properties of metastable GeSn alloys. Here, we demonstrate the effect of the growth conditions on the morphology and composition of Ge/GeSn core/shell nanowires by correlating the experimental observations with a theoretical interpretation based on a multiscale approach. We show that the cross-sectional morphology of Ge/GeSn core/shell nanowires changes from hexagonal to dodecagonal upon increasing the supply of the Sn precursor. This transformation strongly influences the Sn distribution as a higher Sn content is measured under the {112} growth front. Ab initio DFT calculations provide an atomic-scale explanation by showing that Sn incorporation is favored at the {112} surfaces, where the Ge bonds are tensile-strained. A phase-field continuum model was developed to reproduce the morphological transformation and the Sn distribution within the wire, shedding light on the complex growth mechanism and unveiling the relation between segregation and faceting. The tunability of the photoluminescence emission with the change in composition and morphology of the GeSn shell highlights the potential of the core/shell nanowire system for optoelectronic devices operating at mid-infrared wavelengths.

High Mobility Stemless InSb Nanowires.

High aspect-ratio InSb nanowires (NWs) of high chemical purity are sought for implementing advanced quantum devices. The growth of InSb NWs is challenging, generally requiring a stem of a foreign material for nucleation. Such a stem tends to limit the length of InSb NWs and its material becomes incorporated in the InSb segment. Here, we report on the growth of chemically pure InSb NWs tens of microns long. Using a selective-area mask in combination with gold as a catalyst allows complete omission of the stem, thus demonstrating that InSb NWs can grow directly from the substrate. The introduction of the selective-area mask gives rise to novel growth kinetics, demonstrating high growth rates and complete suppression of layer deposition on the mask for Sb-rich conditions. The crystal quality and chemical purity of these NWs is reflected in the significant enhancement of low-temperature electron mobility, yielding an average of 4.4 × 104 cm2/(V s), compared to previously studied InSb NWs grown on stems.

Bottom-Up Grown 2D InSb Nanostructures.

Low-dimensional high-quality InSb materials are promising candidates for next-generation quantum devices due to the high carrier mobility, low effective mass, and large g-factor of the heavy element compound InSb. Various quantum phenomena are demonstrated in InSb 2D electron gases and nanowires. A combination of the best features of these two systems (pristine nanoscale and flexible design) is desirable to realize, e.g., the multiterminal topological Josephson device. Here, controlled growth of 2D nanostructures, nanoflakes, on an InSb platform is demonstrated. An assembly of nanoflakes with various dimensions and morphologies, thinner than the Bohr radius of InSb, are fabricated. Importantly, the growth of either nanowires or nanoflakes can be enforced experimentally by setting growth and substrate design parameters properly. Hall bar measurements on the nanostructures yield mobilities up to ≈20 000 cm2 V-1 s-1 and detect quantum Hall plateaus. This allows to see the system as a viable nanoscale 2D platform for future quantum devices.

Spin-Orbit Interaction and Induced Superconductivity in a One-Dimensional Hole Gas.

Low dimensional semiconducting structures with strong spin-orbit interaction (SOI) and induced superconductivity attracted great interest in the search for topological superconductors. Both the strong SOI and hard superconducting gap are directly related to the topological protection of the predicted Majorana bound states. Here we explore the one-dimensional hole gas in germanium silicon (Ge-Si) core-shell nanowires (NWs) as a new material candidate for creating a topological superconductor. Fitting multiple Andreev reflection measurements shows that the NW has two transport channels only, underlining its one-dimensionality. Furthermore, we find anisotropy of the Landé g-factor that, combined with band structure calculations, provides us qualitative evidence for the direct Rashba SOI and a strong orbital effect of the magnetic field. Finally, a hard superconducting gap is found in the tunneling regime and the open regime, where we use the Kondo peak as a new tool to gauge the quality of the superconducting gap.

Critical strain for Sn incorporation into spontaneously graded Ge/GeSn core/shell nanowires.

We address the role of non-uniform composition, as measured by energy-dispersive x-ray spectroscopy, in the elastic properties of core/shell nanowires for the Ge/GeSn system. In particular, by finite element method simulations and transmission electron diffraction measurements, we estimate the residual misfit strain when a radial gradient in Sn and a Ge segregation at the nanowire facet edges are present. An elastic stiffening of the structure with respect to the uniform one is concluded, particularly for the axial strain component. More importantly, refined predictions linking the strain and the Sn percentage at the nanowire facets enable us to quantitatively determine the maximum compressive strain value allowing for additional Sn incorporation into a GeSn alloy. The progressive incorporation with increasing shell thickness, under constant growth conditions, is specifically induced by the nanowire configuration, where a larger elastic relaxation of the misfit strain takes place.

Quantized Majorana conductance.

Majorana zero-modes-a type of localized quasiparticle-hold great promise for topological quantum computing. Tunnelling spectroscopy in electrical transport is the primary tool for identifying the presence of Majorana zero-modes, for instance as a zero-bias peak in differential conductance. The height of the Majorana zero-bias peak is predicted to be quantized at the universal conductance value of 2e2/h at zero temperature (where e is the charge of an electron and h is the Planck constant), as a direct consequence of the famous Majorana symmetry in which a particle is its own antiparticle. The Majorana symmetry protects the quantization against disorder, interactions and variations in the tunnel coupling. Previous experiments, however, have mostly shown zero-bias peaks much smaller than 2e2/h, with a recent observation of a peak height close to 2e2/h. Here we report a quantized conductance plateau at 2e2/h in the zero-bias conductance measured in indium antimonide semiconductor nanowires covered with an aluminium superconducting shell. The height of our zero-bias peak remains constant despite changing parameters such as the magnetic field and tunnel coupling, indicating that it is a quantized conductance plateau. We distinguish this quantized Majorana peak from possible non-Majorana origins by investigating its robustness to electric and magnetic fields as well as its temperature dependence. The observation of a quantized conductance plateau strongly supports the existence of Majorana zero-modes in the system, consequently paving the way for future braiding experiments that could lead to topological quantum computing.

Epitaxy of advanced nanowire quantum devices.

Semiconductor nanowires are ideal for realizing various low-dimensional quantum devices. In particular, topological phases of matter hosting non-Abelian quasiparticles (such as anyons) can emerge when a semiconductor nanowire with strong spin-orbit coupling is brought into contact with a superconductor. To exploit the potential of non-Abelian anyons-which are key elements of topological quantum computing-fully, they need to be exchanged in a well-controlled braiding operation. Essential hardware for braiding is a network of crystalline nanowires coupled to superconducting islands. Here we demonstrate a technique for generic bottom-up synthesis of complex quantum devices with a special focus on nanowire networks with a predefined number of superconducting islands. Structural analysis confirms the high crystalline quality of the nanowire junctions, as well as an epitaxial superconductor-semiconductor interface. Quantum transport measurements of nanowire 'hashtags' reveal Aharonov-Bohm and weak-antilocalization effects, indicating a phase-coherent system with strong spin-orbit coupling. In addition, a proximity-induced hard superconducting gap (with vanishing sub-gap conductance) is demonstrated in these hybrid superconductor-semiconductor nanowires, highlighting the successful materials development necessary for a first braiding experiment. Our approach opens up new avenues for the realization of epitaxial three-dimensional quantum architectures which have the potential to become key components of various quantum devices.

Ballistic superconductivity in semiconductor nanowires.

Semiconductor nanowires have opened new research avenues in quantum transport owing to their confined geometry and electrostatic tunability. They have offered an exceptional testbed for superconductivity, leading to the realization of hybrid systems combining the macroscopic quantum properties of superconductors with the possibility to control charges down to a single electron. These advances brought semiconductor nanowires to the forefront of efforts to realize topological superconductivity and Majorana modes. A prime challenge to benefit from the topological properties of Majoranas is to reduce the disorder in hybrid nanowire devices. Here we show ballistic superconductivity in InSb semiconductor nanowires. Our structural and chemical analyses demonstrate a high-quality interface between the nanowire and a NbTiN superconductor that enables ballistic transport. This is manifested by a quantized conductance for normal carriers, a strongly enhanced conductance for Andreev-reflecting carriers, and an induced hard gap with a significantly reduced density of states. These results pave the way for disorder-free Majorana devices.

True Atomic-Scale Imaging in Three Dimensions: A Review of the Rebirth of Field-Ion Microscopy.

This article reviews recent advances utilizing field-ion microscopy (FIM) to extract atomic-scale three-dimensional images of materials. This capability is not new, as the first atomic-scale reconstructions of features utilizing FIM were demonstrated decades ago. The rise of atom probe tomography, and the application of this latter technique in place of FIM has unfortunately severely limited further FIM development. Currently, the ubiquitous availability of extensive computing power makes it possible to treat and reconstruct FIM data digitally and this development allows the image sequences obtained utilizing FIM to be extremely valuable for many material science and engineering applications. This article demonstrates different applications of these capabilities, focusing on its use in physical metallurgy and semiconductor science and technology.