Assessing the Effects of VEGF Releasing Microspheres on the Angiogenic and Foreign Body Response to a 3D Printed Silicone-Based Macroencapsulation Device.

Macroencapsulation systems have been developed to improve islet cell transplantation but can induce a foreign body response (FBR). The development of neovascularization adjacent to the device is vital for the survival of encapsulated islets and is a limitation for long-term device success. Previously we developed additive manufactured multi-scale porosity implants, which demonstrated a 2.5-fold increase in tissue vascularity and integration surrounding the implant when compared to a non-textured implant. In parallel to this, we have developed poly(ε-caprolactone-PEG-ε-caprolactone)-b-poly(L-lactide) multiblock copolymer microspheres containing VEGF, which exhibited continued release of bioactive VEGF for 4-weeks in vitro. In the present study, we describe the next step towards clinical implementation of an islet macroencapsulation device by combining a multi-scale porosity device with VEGF releasing microspheres in a rodent model to assess prevascularization over a 4-week period. An in vivo estimation of vascular volume showed a significant increase in vascularity (* p = 0.0132) surrounding the +VEGF vs. -VEGF devices, however, histological assessment of blood vessels per area revealed no significant difference. Further histological analysis revealed significant increases in blood vessel stability and maturity (** p = 0.0040) and vessel diameter size (*** p = 0.0002) surrounding the +VEGF devices. We also demonstrate that the addition of VEGF microspheres did not cause a heightened FBR. In conclusion, we demonstrate that the combination of VEGF microspheres with our multi-scale porous macroencapsulation device, can encourage the formation of significantly larger, stable, and mature blood vessels without exacerbating the FBR.

In Vitro and In Vivo Studies on HPMA-Based Polymeric Micelles Loaded with Curcumin.

Curcumin-loaded polymeric micelles composed of poly(ethylene glycol)-b-poly(N-2-benzoyloxypropyl methacrylamide) (mPEG-b-p(HPMA-Bz)) were prepared to solubilize and improve the pharmacokinetics of curcumin. Curcumin-loaded micelles were prepared by a nanoprecipitation method using mPEG5kDa-b-p(HPMA-Bz) copolymers with varying molecular weight of the hydrophobic block (5.2, 10.0, and 17.1 kDa). At equal curcumin loading, micelles composed of mPEG5kDa-b-p(HPMA-Bz)17.1kDa showed better curcumin retention in both phosphate-buffered saline (PBS) and plasma at 37 °C than micelles based on block copolymers with smaller hydrophobic blocks. No change in micelle size was observed during 24 h incubation in plasma using asymmetrical flow field-flow fractionation (AF4), attesting to particle stability. However, 22-49% of the curcumin loading was released from the micelles during 24 h from formulations with the highest to the lowest molecular weight p(HPMA-Bz), respectively, in plasma. AF4 analysis further showed that the released curcumin was subsequently solubilized by albumin. In vitro analyses revealed that the curcumin-loaded mPEG5kDa-b-p(HPMA-Bz)17.1kDa micelles were internalized by different types of cancer cells, resulting in curcumin-induced cell death. Intravenously administered curcumin-loaded, Cy7-labeled mPEG5kDa-b-p(HPMA-Bz)17.1kDa micelles in mice at 50 mg curcumin/kg showed a long circulation half-life for the micelles (t1/2 = 42 h), in line with the AF4 results. In contrast, the circulation time of curcumin was considerably shorter than that of the micelles (t1/2α = 0.11, t1/2ß = 2.5 h) but ∼5 times longer than has been reported for free curcumin (t1/2α = 0.02 h). The faster clearance of curcumin in vivo compared to in vitro studies can be attributed to the interaction of curcumin with blood cells. Despite the excellent solubilizing effect of these micelles, no cytostatic effect was achieved in neuroblastoma-bearing mice, possibly because of the low sensitivity of the Neuro2A cells to curcumin.

Post-loading of proangiogenic growth factors in PLGA microspheres.

Active self-encapsulation (ASE) is a recently developed post-loading method based on absorption of (positively charged) proteins in microporous PLGA microspheres loaded with negatively charged polysaccharides (trapping agents). The aim of this study was to investigate ASE for simultaneous loading and controlled release of multiple growth factors. For this purpose, vascular endothelial growth factor (VEGF), fibroblast growth factor (FGF) and insulin-like growth factor (IGF) were loaded in microspheres containing high molecular weight dextran sulfate (HDS) as trapping agent; loading was performed in a concentrated growth factor solution of low ionic strength and of pH 5 under conditions at which the proteins are positively charged. Subsequent pore closure was induced by incubation of the growth factor-loaded microspheres at 42.5 °C, i.e. above the Tg of (hydrated) PLGA (~30 °C). A 1:1:1 combination of VEGF, FGF and IGF was loaded with high loading (4.3%) and loading efficiency (91%). The in vitro release kinetics and bioactivity of loaded growth factors were studied for 4 weeks using ELISA and an endothelial cell proliferation assay, respectively. While IGF was released quickly, VEGF and FGF were continuously released for 4 weeks in their bioactive form, whereby a growth factor combination had a synergistic angiogenic effect. Therefore, ASE is a suitable method for co-loading growth factors which can provide sustained release profiles of bioactive growth factors, which is attractive for vascularization of biomaterial implants.

Correlation between in vitro stability and pharmacokinetics of poly(ε-caprolactone)-based micelles loaded with a photosensitizer.

Polymeric micelles are extensively investigated as drug delivery systems for hydrophobic drugs including photosensitizers (PSs). In order to benefit from micelles as targeted delivery systems for PS, rather than only solubilizers, the stability and cargo retention of the (PS-loaded) micelles should be properly assessed in biologically relevant media to get insight into the essential parameters predicting their in vivo performance (i.e., pharmacokinetics). In the present study, asymmetric flow field-flow fractionation (AF4) was used to investigate the in vitro stability in human plasma of empty and meta-tetra(hydroxyphenyl)chlorin (mTHPC)-loaded dithiolane-crosslinked micelles based on poly(ɛ-caprolactone)-co-poly(1,2-dithiolane­carbonate)-b-poly(ethylene glycol) (p(CL-co-DTC)-PEG) and non (covalently)-crosslinked micelles composed of poly(ε-caprolactone)-b-poly(ethylene glycol) (pCL-PEG). AF4 allows separation of the micelles from plasma proteins, which showed that small non (covalently)-crosslinked pCL9-PEG (17 nm) and pCL15-PEG (22 nm) micelles had lower stability in plasma than pCL23-PEG micelles with larger size (43 nm) and higher degree of crystallinity of pCL, and had also lower stability than covalently crosslinked p(CL9-DTC3.9)-PEG and p(CL18-DTC7.5)-PEG micelles with similar small sizes (~20 nm). In addition, PS (re)distribution to specific plasma proteins was observed by AF4, giving strong indications for the (in)stability of PS-loaded micelles in plasma. Nevertheless, fluorescence spectroscopy in human plasma showed that the retention of mTHPC in non (covalently)-crosslinked but semi-crystalline pCL23-PEG micelles (>8 h) was much longer than that in covalently crosslinked p(CL18-DTC7.5)-PEG micelles (~4 h). In line with this, in vivo circulation kinetics showed that pCL23-PEG micelles loaded with mTHPC had significantly longer half-life values (t½-ß of micelles and mTHPC was 14 and 18 h, respectively) than covalently crosslinked p(CL18-DTC7.5)-PEG micelles (t½-ß of both micelles and mTHPC was ~2 h). As a consequence, long circulating pCL23-PEG micelles resulted in significantly higher tumor accumulation of both the micelles and loaded mTHPC as compared to short circulating p(CL18-DTC7.5)-PEG micelles. These in vivo data were in good agreement with the in vitro stability studies. In conclusion, the present study points out that AF4 and fluorescence spectroscopy are excellent tools to evaluate the (in)stability of nanoparticles in biological media and thus predict the (in)stability of drug loaded nanoparticles after i.v. administration, which is favorable to screen promising delivery systems with reduced experimental time and costs and without excessive use of animals.

π-π-Stacked Poly(ε-caprolactone)-b-poly(ethylene glycol) Micelles Loaded with a Photosensitizer for Photodynamic Therapy.

To improve the in vivo stability of poly(-caprolactone)-b-poly(ethylene glycol) (PCL-PEG)-based micelles and cargo retention by π-π stacking interactions, pendant aromatic rings were introduced by copolymerization of -caprolactone with benzyl 5-methyl-2-oxo-1,3-dioxane-5-carboxylate (TMC-Bz). It was shown that the incorporation of aromatic rings yielded smaller micelles (18-30 nm) with better colloidal stability in PBS than micelles without aromatic groups. The circulation time of i.v. injected micelles containing multiple pendant aromatic groups was longer (t½-α: ~0.7 h; t½-ß: 2.9 h) than that of micelles with a single terminal aromatic group (t½ < 0.3 h). In addition, the in vitro partitioning of the encapsulated photosensitizer (meta-tetra(hydroxyphenyl)chlorin, mTHPC) between micelles and human plasma was favored towards micelles for those that contained the pendant aromatic groups. However, this was not sufficient to fully retain mTHPC in the micelles in vivo, as indicated by similar biodistribution patterns of micellar mTHPC compared to free mTHPC, and unequal biodistribution patterns of mTHPC and the host micelles. Our study points out that more detailed in vitro methods are necessary to more reliably predict in vivo outcomes. Furthermore, additional measures beyond π-π stacking are needed to stably incorporate mTHPC in micelles in order to benefit from the use of micelles as targeted delivery systems.

Folate decorated polymeric micelles for targeted delivery of the kinase inhibitor dactolisib to cancer cells.

One of the main challenges in clinical translation of polymeric micelles is retention of the drug in the nanocarrier system upon its systemic administration. Core crosslinking and coupling of the drug to the micellar backbone are common strategies to overcome these issues. In the present study, polymeric micelles were prepared for tumor cell targeting of the kinase inhibitor dactolisib which inhibits both the mammalian Target of Rapamycin (mTOR) kinase and phosphatidylinositol-3-kinase (PI3K). We employed platinum(II)-based linker chemistry to couple dactolisib to the core of poly(ethylene glycol)-b-poly(acrylic acid) (PEG-b-PAA) polymeric micelles. The formed dactolisib-PEG-PAA unimers are amphiphilic and self-assemble in an aqueous milieu into core-shell polymeric micelles. Folate was conjugated onto the surface of the micelles to yield folate-decorated polymeric micelles which can target folate receptor over-expressing tumor cells. Fluorescently labeled polymeric micelles were prepared using a lissamine-platinum complex linked in a similar manner as dactolisib. Dactolisib polymeric micelles showed good colloidal stability in water and released the coupled drug in buffers containing chloride or glutathione. Folate decorated micelles were avidly internalized by folate-receptor-positive KB cells and displayed targeted cellular cytotoxicity at 50-75 nM IC50. In conclusion, we have prepared a novel type of folate-receptor targeted polymeric micelles in which platinum(II) linker chemistry modulates drug retention and sustained release of the coupled inhibitor dactolisib.

Vascular Endothelial Growth Factor-Releasing Microspheres Based on Poly(ε-Caprolactone-PEG-ε-Caprolactone)-b-Poly(L-Lactide) Multiblock Copolymers Incorporated in a Three-Dimensional Printed Poly(Dimethylsiloxane) Cell Macroencapsulation Device.

Pancreatic islet transplantation is a promising advanced therapy that has been used to treat patients suffering from diabetes type 1. Traditionally, pancreatic islets are infused via the portal vein, which is subsequently intended to engraft in the liver. Severe immunosuppressive treatments are necessary, however, to prevent rejection of the transplanted islets. Novel approaches therefore have focused on encapsulation of the islets in biomaterial implants which can protect the islets and offer an organ-like environment. Vascularization of the device's surface is a prerequisite for the survival and proper functioning of transplanted pancreatic islets. We are pursuing a prevascularization strategy by incorporation of vascular endothelial growth factor (VEGF)-loaded microspheres in 3-dimensional printed poly(dimethylsiloxane)-based devices prior to their prospective loading with transplanted cells. Microspheres (~50 µm) were based on poly(ε-caprolactone-PEG-ε-caprolactone)-b-poly(L-lactide) multiblock copolymers and were loaded with 10 µg VEGF/mg microspheres, and subsequently dispersed in a hyaluronic acid carrier liquid. In vitro release studies at 37°C demonstrated continuous release of fully bioactive VEGF for 4 weeks. In conclusion, our results demonstrate that incorporation of VEGF-releasing microspheres ensures adequate release of VEGF for a time window of 4 weeks, which is attractive in view of the vascularization of artificial pancreas implants.

Ultrasound-Sensitive Liposomes for Triggered Macromolecular Drug Delivery: Formulation and In Vitro Characterization.

Mistletoe lectin-1 (ML1) is a nature-derived macromolecular cytotoxin that potently induces apoptosis in target cells. Non-specific cytotoxicity to normal cells is one of the major risks in its clinical application, and we therefore propose to encapsulate ML1 in a nanocarrier that can specifically release its cargo intratumorally, thus improving the efficacy to toxicity ratio of the cytotoxin. We investigated the encapsulation of ML1 in ultrasound-sensitive liposomes (USL) and studied its release by high-intensity focused ultrasound (HAccessedIFU). USL were prepared by entrapment of perfluorocarbon nanodroplets in pegylated liposomes. The liposomes were prepared with different DPPC/cholesterol/DSPE-PEG2000 lipid molar ratios (60/20/20 for USL20; 60/30/10 for USL10; 65/30/5 for USL5) before combination with perfluorocarbon (PFC) nanoemulsions (composed of DPPC and perfluoropentane). When triggered with HIFU (peak negative pressure, 2-24 MPa; frequency, 1.3 MHz), PFC nanodroplets can undergo phase transition from liquid to gas thus rupturing the lipid bilayer of usl. Small unilamellar liposomes were obtained with appropriate polydispersity and stability. ML1 and the model protein horseradish peroxidase (HRP) were co-encapsulated with the PFC nanodroplets in USL, with 3% and 7% encapsulation efficiency for USL20 and USL10/USL5, respectively. Acoustic characterization experiments indicated that release is induced by cavitation. HIFU-triggered release of HRP from USL was investigated for optimization of liposomal composition and resulted in 80% triggered release for USL with USL10 (60/30/10) lipid composition. ML1 release from the final USL10 composition was also 80%. Given its high stability, suitable release, and ultrasound sensitivity, USL10 encapsulating ML1 was further used to study released ML1 bioactivity against murine CT26 colon carcinoma cells. Confocal live-cell imaging demonstrated its functional activity regarding the interaction with the target cells. We furthermore demonstrated the cytotoxicity of the released ML1 (I.E., After USL were treated with HIFU). The potent cytotoxicity (IC50 400 ng/ml; free ML1 IC50 345 ng/ml) was compared to non-triggered USL loaded with ML1. Our study shows that USL in combination with HIFU hold promise as trigger-sensitive nanomedicines for local delivery of macromolecular cytotoxins.

Sustained Release of Vascular Endothelial Growth Factor from Poly(ε-caprolactone-PEG-ε-caprolactone)-b-Poly(l-lactide) Multiblock Copolymer Microspheres.

Vascular endothelial growth factor (VEGF) is the major regulating factor for the formation of new blood vessels, also known as angiogenesis. VEGF is often incorporated in synthetic scaffolds to promote vascularization and to enhance the survival of cells that have been seeded in these devices. Such applications require sustained local delivery of VEGF of around 4 weeks for stable blood vessel formation. Most delivery systems for VEGF only provide short-term release for a couple of days, followed by a release phase with very low VEGF release. We now have developed VEGF-loaded polymeric microspheres that provide sustained release of bioactive VEGF for 4 weeks. Blends of two swellable poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone)-b-poly(l-lactide) ([PCL-PEG-PCL]-b-[PLLA])-based multiblock copolymers with different PEG content and PEG molecular weight were used to prepare the microspheres. Loading of the microspheres was established by a solvent evaporation-based membrane emulsification method. The resulting VEGF-loaded microspheres had average sizes of 40-50 µm and a narrow size distribution. Optimized formulations of a 50:50 blend of the two multiblock copolymers had an average VEGF loading of 0.79 ± 0.09%, representing a high average VEGF loading efficiency of 78 ± 16%. These microspheres released VEGF continuously over 4 weeks in phosphate-buffered saline pH 7.4 at 37 °C. This release profile was preserved after repeated and long-term storage at -20 °C for up to 9 months, thereby demonstrating excellent storage stability. VEGF release was governed by diffusion through the water-filled polymer matrix, depending on PEG molecular weight and PEG content of the polymers. The bioactivity of the released VEGF was retained within the experimental error in the 4-week release window, as demonstrated using a human umbilical vein endothelial cells proliferation assay. Thus, the microspheres prepared in this study are suitable for embedment in polymeric scaffolds with the aim of promoting their functional vascularization.

Liposomes with asymmetric bilayers produced from inverse emulsions for nucleic acid delivery.

Asymmetrical lipid nanoparticles are interesting nanocarriers for charged molecules, like nucleic acids. They promise control over inner and outer charge. High charge density on the inside is favourable for efficient condensation and charge neutralisation of highly charged biopharmaceuticals, while a neutral or slightly negative outer layer promotes biocompatibility. The main goal of this work was the development and characterisation of asymmetric liposomes, prepared using water-in-oil (w/o) nanoemulsions of phospholipids (PLs) and squalene in a centrifugal field. This method enables the control over the lipid composition of each monolayer. Liposomes were prepared by passing PL w/o nanoemulsions through an oil-water interface previously saturated with PLs. We used N-(7-Nitrobenz-2-Oxa-1,3-Diazol-4-yl)-1,2-Dihexadecanoyl-sn-Glycero-3-Phosphoethanolamine (NBD-PE) or N-(7-Nitrobenz-2-Oxa-1,3-Diazol-4-yl)-1,2-Dihexadecanoyl-sn-Glycero-3- phosphocholine (NBD-PC) as a fluorescent marker for either the inner or outer lipid layer and plasmid DNA (pDNA) as nucleic acid payload. The final liposomes had sizes below 200 nm and polydispersity indexes of 0.3 and had a bilayer asymmetry of 70%, thus shielding the charge of positive PLs in the inner bilayer leaflet. Final formulations were examined using negative staining transmission electron microscopy (TEM). Plasmid encapsulation efficiency of the method was 10-15%. Our results indicate that the w/o nanoemulsion-centrifugation method allows the successful production of liposomes with tailored features for encapsulation of nucleic acid therapeutics.

Thermosensitive liposomes for triggered release of cytotoxic proteins.

Lysolipid-containing thermosensitive liposomes (LTSL) are clinically-relevant drug nanocarriers which have been used to deliver small molecule cytostatics to tumors in combination with local hyperthermia (42 °C) to trigger local drug release. The objective of this study was to investigate the feasibility of LTSL for encapsulation and triggered release of macromolecular drugs such as plant-derived cytotoxins. As therapeutic protein we used Mistletoe lectin-1 (ML1) - a ribosome-inactivating protein with potent cytotoxic activity in tumor cells. Model macromolecules (dextrans, albumin) and ML1 were encapsulated in small unilamellar LTSL with varying lipid compositions by the thin film hydration method and extrusion. LTSLs showed molecular weight dependent heat-triggered release of the loaded cargo. The most promising composition, ML1 formulated in LTSL composed of 86:10:4 %mol DPPC:MSPC:DSPE-PEG2000, was further studied for bioactivity against murine CT26 colon carcinoma cells. Confocal live-cell imaging showed uptake of released ML1 after mild hyperthermia at 42 °C, subsequently leading to potent cytotoxicity by LTSL-ML1. Our study shows that LTSL in combination with localized hyperthermia hold promise as local tumor delivery strategy for macromolecular cytotoxins.

Anti-GD2 Immunoliposomes for Targeted Delivery of the Survivin Inhibitor Sepantronium Bromide (YM155) to Neuroblastoma Tumor Cells.

PURPOSE: Sepantronium bromide (YM155) is a hydrophilic quaternary compound that cannot be administered orally due to its low oral bioavailability; it is furthermore rapidly eliminated via the kidneys. The current study aims at improving the pharmacokinetic profile of YM155 by its formulation in immunoliposomes that can achieve its enhanced delivery into tumor tissue and facilitate uptake in neuroblastoma cancer cells. METHODS: PEGylated YM155 loaded liposomes composed of DPPC, cholesterol and DSPE-PEG2000 were prepared via passive film-hydration and extrusion method. Targeted (i.e. immuno-)liposomes were prepared by surface functionalization with SATA modified monoclonal anti-disialoganglioside (GD2) antibodies. Liposomes were characterized based on their size, charge, antibody coupling and YM155 encapsulation efficiency, and stability. Flow cytometry analysis and confocal microscopy were performed on IMR32 and KCNR neuroblastoma cell lines. The efficacy of developed formulations were assessed by in-vitro toxicity assays. A pilot pharmacokinetic analysis was performed to assess plasma circulation and tumor accumulation profiles of the developed liposomal formulations. RESULTS: YM155 loaded immunoliposomes had a size of 170 nm and zeta potential of -10 mV, with an antibody coupling efficiency of 60% andYM155 encapsulation efficiency of14%. Targeted and control liposomal formulations were found to have similar YM155 release rates in a release medium containing 50% serum. An in-vitro toxicity study on KCNR cells showed less toxicity for immunoliposomes as compared to free YM155. In-vivo pharmacokinetic evaluation of YM155 liposomes showed prolonged blood circulation and significantly increased half-lives of liposomal YM155 in tumor tissue, as compared to a bolus injection of free YM155. CONCLUSIONS: YM155 loaded immunoliposomes were successfully formulated and characterized, and initial in-vivo results show their potential for improving the circulation time and tumor accumulation of YM155.

Fabrication and characterization of gefitinib-releasing polyurethane foam as a coating for drug-eluting stent in the treatment of bronchotracheal cancer.

The purpose of the present study was to develop gefitinib-loaded polymeric foams that can be used as coating of drug-eluting stents for palliative treatment of bronchotracheal cancer. Release of such an anticancer drug from such stent coating can retard tumor regrowth into the bronchial lumen. Gefitinib-loaded polyurethane (PU) foams were prepared by embedding either gefitinib micronized crystals or gefitinib-loaded poly(lactic-co-glycolic acid) microspheres in water-blown films, with up to 10% w/w loading for gefitinib microcrystals and 15% w/w for gefitinib microspheres (corresponding to 1.0% w/w drug loading). Drug-release studies showed sustained release of gefitinib over a period of nine months, with higher absolute release rates at higher drug loading content. By the end of the studied nine month release periods, 60-100% of the loaded gefitinib had been released. Foams loaded with gefitinib-PLGA microspheres at 15% w/w showed accelerated drug release after 4 months, coinciding with the degradation of PLGA microparticles in the PU foam as demonstrated by scanning electron microscopy (SEM). When applied on a nitinol braided bronchotrachial stent, PU coatings with gefitinib microspheres showed similar mechanical properties as the drug-free PU coating, which indicated that the loading of microspheres did not affect the mechnical properties of the PU foams. In conclusion, we have fabricated drug-loaded PU foams that are suitable for bronchotracheal stent coating.

E-selectin targeted immunoliposomes for rapamycin delivery to activated endothelial cells.

Activated endothelial cells play a pivotal role in the pathology of inflammatory disorders and thus present a target for therapeutic intervention by drugs that intervene in inflammatory signaling cascades, such as rapamycin (mammalian target of rapamycin (mTOR) inhibitor). In this study we developed anti-E-selectin immunoliposomes for targeted delivery to E-selectin over-expressing tumor necrosis factor-α (TNF-α) activated endothelial cells. Liposomes composed of 1,2-dipalmitoyl-sn-glycero-3.;hosphocholine (DPPC), Cholesterol, and 1,2-Distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethyleneglycol)-2000]-maleimide (DSPE-PEG-Mal) were loaded with rapamycin via lipid film hydration, after which they were further functionalized by coupling N-succinimidyl-S-acetylthioacetate (SATA)-modified mouse anti human E-selectin antibodies to the distal ends of the maleimidyl (Mal)-PEG groups. In cell binding assays, these immunoliposomes bound specifically to TNF-α activated endothelial cells. Upon internalization, rapamycin loaded immunoliposomes inhibited proliferation and migration of endothelial cells, as well as expression of inflammatory mediators. Our findings demonstrate that rapamycin-loaded immunoliposomes can specifically inhibit inflammatory responses in inflamed endothelial cells.

PLGA-PEG nanoparticles for targeted delivery of the mTOR/PI3kinase inhibitor dactolisib to inflamed endothelium.

Dactolisib (NVP-BEZ235, also referred to as: 'BEZ235' or 'BEZ') is a dual mTOR/PI3K inhibitor that is of potential interest in the treatment of inflammatory disorders. This work focuses on formulation of BEZ-loaded polymeric nanoparticles composed of a blend of poly(D,L-lactide-co-glycolide) (PLGA) and poly(D,L-lactide-co-glycolide)-poly(ethylene glycol)-2000 (PLGA-PEG). The nanoparticles were prepared by an oil/water emulsion solvent evaporation method, and were subsequently characterized for yield, encapsulation efficiency, morphology, particle size, drug-polymer interaction and in vitro drug release profiles. A targeted formulation was developed by conjugation of a S-acetyl-thioacetyl (SATA)-modified mouse-anti human E-selectin antibody to the distal end of PLGA-PEG-SPDP containing nanoparticles. Our results show the successful preparation of spherical PLGA/PLGA-PEG nanoparticles loaded with BEZ. The particle size distribution showed a range from 250 to 360nm with a high (>75%) BEZ encapsulation efficiency. Approximately 35% of the loaded BEZ was released within 10days at 37°C in a medium containing 5% bovine serum albumin (BSA). Evaluation of efficacy of anti-E-selectin decorated BEZ-loaded nanoparticles was carried out in tumor necrosis factor-α (TNF-α) activated endothelial cells. Confocal microscopy analysis showed that cellular uptake of the targeted nanoparticles and subsequent internalization. Cell functional assays, including migration assay and phosphowestern blot analysis of the mTOR and pI3K signaling pathways, revealed that the E-selectin targeted nanoparticles loaded with BEZ had a pronounced effect on inflammation-activated endothelial cells as compared to the non-targeted BEZ-loaded nanoparticles. In conclusion, E-selectin targeted nanoparticles have a high potential in delivering the potent mTOR/pI3K inhibitor dactolisib to inflamed endothelial cells and are an interesting nanomedicine for anti-inflammatory therapy.

Gefitinib/gefitinib microspheres loaded polyurethane constructs as drug-eluting stent coating.

One of the complications of bronchotracheal cancer is obstruction of the upper airways. Local tumor resection in combination with an airway stent can suppress intraluminal tumor (re)growth. We have investigated a novel drug-eluting stent coating for local release of the anticancer drug gefitinib. A polyurethane (PU) sandwich construct was prepared by a spray coating method in which gefitinib was embedded between a PU support layer of 200µm and a PU top layer of 50-200µm. Gefitinib was either embedded in the construct as small crystals or as gefitinib-loaded poly(lactic-co-glycolic acid) (PLGA) microspheres (MSP). The drug was incorporated in the PU constructs with high recovery (83-93%), and the spray coating procedure did not affect the morphologies of the embedded microspheres as demonstrated by scanning electron microscopy (SEM), confocal laser scanning microscopy and fluorescence microscopy analysis. PU constructs loaded with gefitinib crystals released the drug for 7-21days and showed diffusion based release kinetics. Importantly, directional release of the drug towards the top layer, which is supposed to face the tumor mass, was controlled by the thicknesses of the PU top layer. PU constructs loaded with gefitinib microspheres released the drug in a sustained manner for >6months indicating that drug release from the microspheres became the rate limiting step. In conclusion, the sandwich structure of drug-loaded PLGA microspheres in PU coating is a promising coating for airway stents that release anticancer drugs locally for a prolonged time.

Effect of Particle Size on Drug Loading and Release Kinetics of Gefitinib-Loaded PLGA Microspheres.

Polymeric microspheres have gained widespread application as drug eluting depots. Typically, drug-loaded polymeric microspheres are prepared by oil-in-water emulsification which yields a product with a broad size distribution. The aim of the present study was to investigate the properties of different size-fractions of drug-loaded microspheres, in order to delineate whether particle size governs drug loading efficiency and release profile. Gefitinib-loaded PLGA-based microspheres were prepared using an oil-in-water solvent evaporation method and wet-sieved to obtain well-defined size fractions of 5 ± 1, 32 ± 4, 70 ± 3, and 130 ± 7 µm, respectively. The average drug loading of unfractionated microspheres was 6.3 ± 0.4% w/w, while drug loading of sieved fractions ranged from 2.4 ± 0.3 to 7.6 ± 0.9% w/w for smallest to largest microparticles. X-ray diffraction (XRD) and differential scanning calorimetry (DSC) analysis demonstrated that gefitinib was amorphously dispersed in the PLGA matrix, with no apparent shift in the Tg of PLGA indicating the absence of direct molecular interactions of the drug and polymer due to the formation of small drug particles embedded in PLGA. In vitro drug release was studied with microspheres embedded in dextran hydrogels to avoid their aggregation during the incubation conditions. Microspheres smaller than 50 µm showed rapid diffusion-based release reaching completion within 2 days when particles have not degraded yet. Larger microspheres, however, showed a sigmoidal release pattern that continued for three months in which diffusion (early stage) as well as particle erosion (later stage) governed drug release. Scanning electron microscopy (SEM) and polymer degradation data showed that larger microspheres degraded faster than smaller ones, which is in line with autocatalytic PLGA degradation upon acidification within the core of microparticles. In conclusion, we showed that different size-fractions of drug-loaded microspheres showed quite distinct drug loading and release kinetics. Control of microparticle size by fractionation is therefore an important determinant for obtaining well-defined and reproducible sustained release depots.

Plasma CTGF is independently related to an increased risk of cardiovascular events and mortality in patients with atherosclerotic disease: the SMART study.

AIMS: Connective tissue growth factor (CTGF) plays a key role in tissue fibrogenesis and growing evidence indicates a pathogenic role in cardiovascular disease. Aim of this study is to investigate the association of connective tissue growth factor (CTGF/CCN2) with cardiovascular risk and mortality in patients with manifest vascular disease. METHODS AND RESULTS: Plasma CTGF was measured by ELISA in a prospective cohort study of 1227 patients with manifest vascular disease (mean age 59.0 ± 9.9 years). Linear regression analysis was performed to quantify the association between CTGF and cardiovascular risk factors. Results are expressed as beta (ß) regression coefficients with 95% confidence intervals (CI). The relation between CTGF and the occurrence of new cardiovascular events and mortality was assessed with Cox proportional hazard analysis. Adjustments were made for potential confounding factors. Plasma CTGF was positively related to total cholesterol (ß 0.040;95%CI 0.013-0.067) and LDL cholesterol (ß 0.031;95%CI 0.000-0.062) and inversely to glomerular filtration rate (ß -0.004;95%CI -0.005 to -0.002). CTGF was significantly lower in patients with cerebrovascular disease. During a median follow-up of 6.5 years (IQR 5.3-7.4) 131 subjects died, 92 experienced an ischemic cardiac complication and 45 an ischemic stroke. CTGF was associated with an increased risk of new vascular events (HR 1.21;95%CI 1.04-1.42), ischemic cardiac events (HR 1.41;95%CI 1.18-1.67) and all-cause mortality (HR 1.18;95%CI 1.00-1.38) for every 1 nmol/L increase in CTGF. No relation was observed between CTGF and the occurrence of ischemic stroke. CONCLUSIONS: In patients with manifest vascular disease, elevated plasma CTGF confers an increased risk of new cardiovascular events and all-cause mortality.

Docosahexaenoic acid liposomes for targeting chronic inflammatory diseases and cancer: an in vitro assessment.

Inflammation, oxidative stress, and uncontrolled cell proliferation are common key features of chronic inflammatory diseases, such as atherosclerosis and cancer. ω3 polyunsaturated fatty acids (PUFAs; also known as omega3 fatty acids or fish oil) have beneficial effects against inflammation upon dietary consumption. However, these effects cannot be fully exploited unless diets are enriched with high concentrations of fish oil supplements over long periods of time. Here, a nanomedicine-based approach is presented for delivering effective levels of PUFAs to inflammatory cells. Nanoparticles are internalized by immune cells, and hence can adequately deliver bioactive lipids into these target cells. The ω3 FA docosahexaenoic acid was formulated into liposomes (ω-liposomes), and evaluated for anti-inflammatory effects in different types of immune cells. ω-Liposomes strongly inhibited the release of reactive oxygen species and reactive nitrogen species from human neutrophils and murine macrophages, and also inhibited the production of the proinflammatory cytokines TNFα and MCP1. Moreover, ω-liposomes inhibited tumor-cell proliferation when evaluated in FaDu head and neck squamous carcinoma and 4T1 breast cancer cells in in vitro cultures. We propose that ω-liposomes are a promising nanonutraceutical formulation for intravenous delivery of fish oil FAs, which may be beneficial in the treatment of inflammatory disorders and cancer.

Locoregional cancer therapy using polymer-based drug depots.

Locoregional delivery of anticancer drugs is an attractive approach to minimize adverse effects associated with intravenous chemotherapy. Polymer-based drug depots injected or implanted intratumorally or adjacent to the tumor can provide long-term local drug exposure. This review highlights studies in which drug-eluting depots have been applied locally in the treatment of cancer. In many cases such drug depots are used for prevention of tumor recurrence after surgery to eradicate remaining tumor cells. Clinical success has been reported for the treatment of brain cancer and liver cancer, and preclinical studies showed proof-of-concept for inhaled drug depots in lung cancer and intraperitoneally injected depots for the treatment of abdominal cancer.