A Reversible Mechanochromic AIEgen Based on Triphenylamine for the Selective Detection of Vitamin B2 (Riboflavin) in Aqueous Media and Histotoxicity.

(E)-Ethyl 2-cyano-3-(4'-(diphenyl amino)-[1,1'-biphenyl]-4-yl) acrylate (RSJ) is a novel luminogen based on triphenylamine. It has been fully synthesized and characterized, exhibiting an incredible photophysical phenomenon known as aggregation-induced emission (AIE). This work describes a fluorescent sensor that detects vitamin B2 in mixed aqueous media with high selectivity and a low limit of detection as well as a mechanism for reversible mechanochromic luminescence. Moreover, the molecule was validated for its nontoxicity in water using a histotoxicological study. Fish subjected to two different concentrations of the "novel luminogen" that displayed photophysical phenomena during sensing of vitamin B2 (riboflavin) in mixed aqueous media did not exhibit any significant differences in the structural makeup of their liver, kidney, gills, brain, and muscle tissues when compared with the control group.

Nanomaterials Based Multifunctional Bioactivities of V2O5 and Mesoporous Carbon@V2O5 Composite: Preparation and Characterization.

Nanocarriers have attracted considerable interest due to their prospective applications in the delivery of anticancer medications and their distinct bioactivities. Biogenic nanostructures can be effective nanocarriers for delivering drugs as a consequence of sustainable and biodegradable biomass-derived nanostructures that perform specific functions. In this case, a vanadium oxide (V2O5) and mesoporous carbon@V2O5 (C@V) composite was developed as a possible drug delivery system, and its bioactivities, including antioxidant, antibacterial, and anticancer, were investigated. Doxorubicin (DOX), an anticancer drug, was introduced to the nanoparticles, and the loading and release investigation was conducted. Strong interfacial interactions between mesoporous carbon (MC) and V2O5 nanostructures have been found to improve performance in drug loading and release studies and bioactivities. After incubation, the potent anticancer effectiveness was seen based on C@V nanocomposite. This sample was also utilized to research potential biomedical uses as an antioxidant, antibacterial, and anticancer. The most effective antioxidant, the C@V sample (61.2%), exhibited a higher antioxidant activity than the V-2 sample (44.61%). The C@V sample ultimately attained a high DOX loading efficacy of 88%, in comparison to a pure V2O5 sample (V-2) loading efficacy of 80%. Due to the combination of mesoporous carbon and V2O5, which increases specific surface area and surface sites of action as well as the morphology, it proved that the mesoporous carbon@V2O5 composite (C@V) sample demonstrated greater efficacy.

Facile synthesis of sulphur-doped carbon dots (S-CDs) using a hydrothermal method for the selective sensing of Cr6+ and Fe3+ ions: application to environmental water sample analysis.

In this work, we used a one-step hydrothermal method to synthesize blue-emission sulfur-doped carbon dots (S-CDs) using jaggery as a carbon precursor. The synthesized carbon quantum dots showed low toxicity, good water solubility, anti-interference properties, and stable fluorescence. When excited at 310 nm, the S-CDs produced bright emission with a quantum yield of 7.15% at 397 nm. The S-CDs exhibited selective and sensitive quenching responses with limits of detection (LODs) of 4.25 µg mL-1 and 3.15 µg mL-1 for variable concentrations of Cr6+ and Fe3+, respectively, accompanied by a consistent linear relationship between fluorescence intensity and these concentrations. Fluorescence lifetime measurements were used to investigate the fluorescence quenching mechanism, which supports the static type of quenching. Outstanding benefits of the developed S-CD based fluorescence probe include its low cost, excellent sensitivity and selectivity, and ease of use for the detection of Cr6+ and Fe3+ ions. The developed carbon dot based fluorescent probe was successfully used to detect Cr6+ and Fe3+ ions in real water samples with an excellent recovery ratio.

Furan-Dihydroquinazolinone Based Fluorescent Nanoprobe for Selective Recognition of 4-Nitrophenol: A Spectofluorimetric Approach.

Fluorescent organic nanoparticles (FONPs) have attracted much attention as a practicable and effective platform for detection applications. The present article describes the preparation of FONPs derived from the quinazolinone-based 2-(furan-2-yl)-2,3-dihydroquinazolin-4(1H)-one derivative FHDQ. Self-assembly of FHDQ in an aqueous medium resulted in the formation of FONPs through H-type aggregation and showed excellent fluorescence properties. The presence of other coexisting species solutions did not affect the selective fluorescence quenching observed with the addition of 4-nitrophenol (4-NP). The photophysical properties, i.e., UV-Vis absorbance, fluorescence emission, and lifetime measurements together with zeta particle sizer, support excited-state complex formation followed by a dynamic fluorescence quenching phenomenon in the emission of FDHQNPs. In the concentration range of 0 to 36 µg.[Formula: see text], the detection limit of this turn-off sensor FDHQNPs against 4-NP was determined to be 0.01611 µM. Finally, the practicability of the FDHQNPs for the analysis of 4-NP in environmental samples was demonstrated.

Route-dependent tailoring of carbon dot release in alginate hydrogel beads (HB-Alg@WTR-CDs): A versatile platform for biomedical applications.

The present investigation explores the different pathways for development of waste tea residue carbon dots (WTR-CDs) loading into hydrogel matrix for WTR-CDs releasing probe. Fluorescent WTR-CDs incorporated into hydrogel matrix were synthesized by valorisation of kitchen waste tea by simple carbonization method (λem = 450 nm, ΦWTR-CDs =18.45 %). Biopolymeric alginate-based hydrogel beads (HB-Alg) were prepared by simple extrusion method. Three routes (ex-situ/in-situ) were employed for loading of WTR-CDs into hydrogel matrix. Successful synthesis of WTR-CDs and its loading into hydrogel matrix was confirmed via various characterization techniques. Developed protocol was employed for stimuli-responsive cumulative release of WTR-CDs study (pH = 3.0, 7.4, 9.0) was monitored over 7 days. Results suggests that, the HB-Alg@WTR-CDs-A system with in-situ loaded WTR-CDs have sustained release due to ionic interaction of WTR-CDs with crosslinked polymer network, whereas in HB-Alg@WTR-CDs-B, WTR-CDs loaded in wet-beads having burst release in which loosely bound WTR-CDs into hydrogel cavities releases rapidly. While, in case of HB-Alg@WTR-CDs-C, lowest release was observed due to weakly surface bound WTR-CDs, low loading and shrinkage of pores into dry-beads. Radical scavenging activity was studied and shown antioxidant properties of WTR-Powder, WTR-CDs and HB-Alg@WTR-CDs-A,B,C. Cytotoxicity of all systems was checked via CAM assay and significant growth in blood vascularization with no loss of chick embryo confirming the released WTR-CDs are biocompatible. Successful investigation and summarization of results ensure that, waste-valorisation, simple, sustainable, and smart hydrogel systems with different routes of WTR-CDs loading have opened a window to understand the mechanistic pathways in release behaviour. This robust approach for improvement of smarter and biocompatible materials can be fruitfully applicable in advanced, controlled and stimuli responsive delivery probes.

Histotoxicity of AIEgen Based on Triphenylamine for the Simultaneous and Discriminatory Sensing of Hg2+ and Ag+ Directly in Aqueous Media for Environmental Applications.

A newly synthesized AIEgen based on triphenylamine is fully characterized and coded as BRA for the simultaneous and discriminatory selective detection of Hg2+ and Ag+ ions directly in mixed aqueous media for the identification and purification of water with a low detection limit. Moreover, we employed BRA in histotoxicity in that when compared to the control group, fish exposed to the "novel synthesized luminogen (BRA)" that demonstrated photophysical phenomena during the "sensing of mercury and silver (heavy metals) in aqueous media" did not show any major distinguishing changes in the architecture of their gills, liver, muscle, brain, kidney, and heart tissues.

SDS-capped 1-pyrenecarboxaldehyde nanoprobe for selective detection of Cu2+ ion from water samples: Spectroscopic approach.

Sodium dodecyl sulfate (SDS)-capped 1-pyrenecarboxaldehyde nanoparticles (PyalNPs) were prepared using a reprecipitation method in an aqueous medium and exhibited red-shifted aggregation-induced enhanced emission (AIEE). The dynamic light scattering (DLS) examination showed narrower particle size distribution with an average particle size of 41 nm, whereas -34.5 mV zeta potential value indicate the negative surface charge and good stability of nanoparticles (NPs) in an aqueous medium. The AIEE was seen at λmax = 473 nm in a fluorescence spectrum of a PyalNP suspension. In the presence of Cu2+ ions, the fluorescence of PyalNPs quenches very significantly, even in the presence of other metal ions like Ba2+ , Ca2+ , Cd2+ , Co2+ , Al3+ , Fe2+ , Hg2+ , Ni2+ and Mg2+ . The changes in the fluorescence lifetime of PyalNPs in the presence of Cu2+ ions suggested that the type of quenching was dynamic. The fluorescence quenching data for the NPs suspension fitted well into a typical Stern-Volmer relationship in the concentration range 1.0-25 µg/ml of Cu2+ ions. The estimated value of the correlation coefficient R2 = 0.9877 was close to 1 and showed the linear relationship between quenching data and Cu2+ ion concentration. The limit of detection (LOD) was found to be 0.94 ng/ml and is far below the tolerable intake limit value of 1.3 µg/ml accepted by the World Health Organization for Cu2+ ions in drinking water. The fluorescence quenching approach for a SDS-capped Pyal nanosuspension for copper ion quantification is of high specificity and coexisting ions were found to interfere very negligibly. The developed method was successfully applied for the estimation of copper ions in river water samples.

Bioderived Mesoporous Carbon@Tungsten Oxide Nanocomposite as a Drug Carrier Vehicle of Doxorubicin for Potent Cancer Therapy.

Scientists have investigated the possibility of employing nanomaterials as drug carriers. These nanomaterials can preserve their content and transport it to the target region in the body. In this investigation, we proposed a simple method for developing distinctive, bioderived nanostructures with mesoporous carbon nanoparticles impregnated with tungsten oxide (WO3). Prior to characterizing and encapsulating WO3 with bioderived mesoporous carbon, the anticancer drug doxorubicin (DOX) was added to the nanoparticles and examined loading and release study. The approaches for both nanoparticle production and characterization are discussed in detail. Colloidal qualities of the nanomaterial can be effectively preserved while also allowing transdermal transportation of nanoparticles into the body by forming them into green, reusable, and porous nanostructures. Although the theories of nanoparticles and bioderived carbon each have been studied separately, the combination presents a new route to applications connected to nanomedicine. Furthermore, this sample was used to study exotic biomedical applications, such as antioxidant, antimicrobial, and anticancer activities. The W-3 sample had lower antioxidant activity (44.01%) than the C@W sample (56.34%), which was the most potent. A high DOX entrapment effectiveness of 97% was eventually achieved by the C@W sample, compared to a pure WO3 entrapment efficiency of 91%. It was observed that the Carbon/WO3 composite (C@W) sample showed more efficacy because the mesoporous carbon composition with WO3 increases the average surface area and surface-active locations.

Construction of Waste Chalk Powder into mpg-C3N4-CaSO4 as an Efficient Photocatalyst for Dye Degradation under UV-Vis Light and Sunlight.

In this article, we present the synthesis of calcium sulfate nanoparticles (CaSO4 NPs) from waste chalk powder by the calcination method. These CaSO4 NPs were utilized for the construction of a mesoporous graphitic carbon nitride-calcium sulfate (mpg-C3N4-CaSO4) photocatalyst. Synthesized materials were confirmed by several characterization techniques. The photocatalytic performance of the synthesized samples was tested by the degradation of methylene blue (MB) in the presence of both UV-vis light and sunlight. The efficiency of photocatalytic degradation of MB dye using the optimized mpg-C3N4-CaSO4-2 composite reached 91% within 90 min in the presence of UV-vis light with superb photostability and recyclability after five runs compared to individual mpg-C3N4 and CaSO4 NPs and reached 95% within 120 min under sunlight. Histotoxicological studies on fish liver and ovary indicated that the dye containing the solution damaged the structure of the liver and ovary tissues, whereas the photodegraded solution of MB was found to be less toxic and caused negligible alterations in their typical structure similar to the control group.

One-step in-situ sustainable synthesis of magnetic carbon nanocomposite from corn comb (MCCC): agricultural biomass valorisation for pollutant abatement in wastewater.

This study explored a novel, eco-friendly, sustainable, low-cost, and abundantly available corn comb (CC) agricultural biomass waste-derived one-step in-situ synthesis of magnetic carbon (MCCC) as an efficient adsorbent for water decontamination applications. Herein, we developed a robust and easily separable MCCC by carbonization of Fe(NO3)3.9H2O single iron salt-soaked CC at 500 °C for 5 h. The as-synthesized MCCC was confirmed for their physicochemical properties by various characterization techniques viz. scanning electron microscopy (SEM), high-resolution transmission emission microscopy (HR-TEM), energy dispersive X-ray (EDX), thermogravimetric analysis (TGA), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), surface area measurements by Brunauer-Emmett-Teller (BET) study, Raman analysis, and magnetic behavior by VSM analysis. The adsorption properties of MCCC on prototypical pollutant methylene blue (MB) was monitored depending on the effect of pH, adsorbent dose, contact time, and varying concentrations of MB. Especially, the π-π interactions played important role in the adsorption of MB at acidic pH (pH = 4). The MCCC displayed a maximum uptake capacity of 120.73 ± 0.63 mg/g toward MB. The Langmuir, Freundlich, and Temkin adsorption isotherm models were fitted with determined coefficient (R2) values of 0.99, 0.95, and 0.96 respectively. The kinetics of the adsorption process was well fitted with a pseudo-second-order model (R2 = 0.99). Most significantly, the as-designed easily separable, and reusable adsorbent, MCCC was effectively applied for the abatement of pollutants, different kinds of dyes, pesticides, and industrial wastewater samples. The sustainable, affordable, and waste to wealth-based MCCC with a simple synthesis methodology can be fruitfully applicable for environmental remediation and water decontamination.

Tetraphenylethene-Based Fluorescent Chemosensor with Mechanochromic and Aggregation-Induced Emission (AIE) Properties for the Selective and Sensitive Detection of Hg2+ and Ag+ Ions in Aqueous Media: Application to Environmental Analysis.

It is critical to design a novel and simple bifunctional sensor for the selective and sensitive detection of ions in an aqueous media in environmental samples. As a result, in this study, tetraphenylethene hydrazinecarbothioamide (TPE-PVA), known as probe 1, was successfully synthesized and characterized as having impressive photophysical phenomena such as aggregation-induced emission (AIE) and mechanochromic properties by applying mechanical force to the solid of probe 1. The emission of the solid of probe 1 changed from turquoise blue to lemon yellow after grinding, from lemon yellow to parakeet green after annealing at 160 °C, and to arctic blue after fuming with DCM. Such characteristics could lead to a variety of applications in several fields. The probe was implemented and demonstrated remarkable selectivity and sensitivity toward mercury(II) and silver(I) ions by substantially switching off emission over other cations. Following an extensive photophysical analysis, it was discovered that detection limits (LOD) as low as 0.18344 and 0.2384 µg mL-1 for Hg2+ and Ag+, respectively, are possible with a quantum yield (Φ) of 2.26. Probe 1 was also explored as a Hg2+ and Ag+ paper strip-based sensor and kit for practical use. The binding mechanisms of probe 1 (TPE-PVA) with Hg2+ and Ag+ were confirmed by 1H NMR titration. These results could lead to the development of reliable onsite Hg2+ and Ag+ fluorescent probes in the future.

Valorization of Waste Tungsten Filament into mpg-C3N4-WO3 Photocatalyst: A Sustainable e-Waste Management and Wastewater Treatment.

The waste of tungsten filament materials in the environment is one of the reasons for environmental pollution, and it is very dangerous to animals and plants. To date, not much attention has been given to its utility or recyclability. Herein, the present work reported the synthesis of tungsten trioxide nanoparticles (WO3 NPs) by the utilization of cost-free waste tungsten filament by a simple calcination method. A mesoporous graphitic carbon nitride-tungsten trioxide (mpg-C3N4-WO3) composite designed from the WO3 NPs produced from tungsten filament waste and thiourea as a carbon and nitrogen precursor by a one-step calcination method. The synthesized samples were characterized and confirmed by different characterization techniques. The photocatalytic behavior of the synthesized mpg-C3N4-WO3 composite was assessed, with respect to the effect of initial pH, amount of photocatalyst, dye concentration, and reaction time, as well for the degradation of Methylene Blue (MB) dye under sunlight. The best photocatalytic performance (92%) was achieved using mpg-C3N4-WO3 with experimental condition ([photocatalyst] = 100 mg/L, [MB]0 = 10 mg/L, pH 8, and time = 120 min) under sunlight irradiation with excellent photostability than that of isolated mpg-C3N4 and WO3 NPs. The histotoxicological studies also showed that the photodegraded products of MB were found to be nontoxic and did not structurally changes in the gill architecture as well as brain tissues of freshwater fish Labeo rohita.

Synthesis of indeno-[1,2-b]-quinoline-9,11(6H,10H)-dione and 7,7-dimethyl-10-aryl-7,8-dihydro-5H-indeno[1,2-b]quinoline-9,11(6H,10H)-dione derivatives in presence of heterogeneous Cu/zeolite-Y as a catalyst.

A simple method for the synthesis of indeno-[1,2-b]-quinoline-9,11-(6H,10H)-dione derivatives and 7,7-dimethyl-10-aryl-7,8-dihydro-5H-indeno[1,2-b]quinoline-9,11(6H,10H)-diones through the reaction of aromatic aldehydes, indan-1,3-dione, dimedone, and p-toluidine/ammonium acetate in the presence of heterogeneous CuO supported on a zeolite-Y catalyst has been investigated in ethanol under reflux conditions. By this method, the reaction time has been reduced, giving an excellent yield of the product. The catalyst was prepared by a hydrothermal method followed by a wet impregnation method. The catalyst had shown Brønsted acid sites and Lewis acid sites. The used catalyst could be actively recycled with a marginal decrease in yield up to five recycles. The prepared catalyst was characterized by FT-IR, pyridine FT-IR, XRD, SEM, EDS, XPS, TEM, and BET surface area analysis. The synthesized compounds were characterized by FT-IR, 1H NMR, 13C NMR and GC-MS spectroscopy.

A brief review on the synthesis, characterisation and analytical applications of nitrogen doped carbon dots.

Since their discovery in 2004, fluorescent carbon nanoparticles have been tremendously studied due to their tunable optical properties. Recent studies on the synthesis and application of doped carbon dots highlight the effortless doping strategy with high quantum yields and applications in diverse fields. Among these, nitrogen doped carbon dots (NCDs) have been extensively investigated for their potential analytical and biological applications. This review features the synthetic methods and important characterisation studies required to verify successful synthesis of nitrogen doped carbon dots. Analytical applications of NCDs in metal ion, biomolecule, temperature, pH and gas sensing along with cell imaging and drug delivery applications are also discussed.

Effect of various aqueous extracting agents on fluorescence properties of waste tea residue derived carbon dots (WTR-CDs): Comparative spectroscopic analysis.

Fluorescent carbon dots (CDs) are one of the important carbonaceous nanomaterials in the area of nanoscience and nanotechnology because of their interesting physical as well as chemical properties. Herein we studied the effect of various aqueous extracting agents on fluorescence properties of waste tea residue-based carbon dots (WTR-CDs). WTR-CDs are firstly synthesized by utilizing kitchen waste-based carbonaceous biomass. To check the role of various aqueous media during the course of WTR-CDs synthesis from carbonized carbon powder, extraction of WTR-CDs was carried out in various kinds of aqueous media viz., only aqueous (100% water, WT), aqueous-alcoholic (10% ethanol, ET), aqueous-acidic (10% acetic acid, AA), and aqueous-basic (10% ammonia, AM). The consequences of extracting agents on the photophysical properties of final WTR-CDs-WT, WTR-CDs-ET, WTR-CDs-AA and WTR-CDs-AM were also discussed in detail. We have observed interesting blue shift fluorescence spectra in acidic medium for WTR-CDs-AA and polar protic solvents compared to polar aprotic medium. The solvatochromic behaviour of WTR-CDs-WT in model polar and non-polar solvent was also studied. The effect of cationic, anionic and non-anionic surfactants on the fluorescence of WTR-CDs-WT was also evaluated. The proposed findings may help researchers in the near future to obtain fast, easy and direct synthesize CDs from a variety of biomass-based precursors under different aqueous conditions.

Sawmill waste derived carbon dots as a fluorescent probe for synthetic dyes in soft drinks.

Herein, for the first time the carbon dots (CDs) were synthesized by reflux method from sawmill waste material. We also represent a novel strategy based on fluorescent CDs for determination of ponceau 4R and allura red dyes in soft drinks. Interestingly, both the dyes were sensitive and showed effective fluorescence quenching of the CDs owing to the interaction between them. The analytical applicability of CDs were evaluated for detection of both the dyes with a good linear relationship between the concentration range of 0.0 to 3.0 µg mL-1 and having detection limit 0.45 and 0.47 µg mL-1 for allura red and ponceau 4R dyes respectively. Meanwhile, the potential application of this novel fluorescent probe for dyes determination in real samples was validated in different soft drink samples with good accuracy and precision. Thus, these findings provides new insights for the potential risk assessment of both the dyes. Moreover, CDs acted as an excellent fluorescent material in cellular imaging owing to their cellular uptake and localization.

Carbon Nanodots Derived from Kitchen Waste Biomass as a Growth Accelerator for Fenugreek Plant.

Herein, we report the utilization of kitchen waste biomass as a source of carbonaceous material for carbon nanodots synthesis and its application as a plant growth regulator in agricultural crops. The water soluble carbon dots (CDs) were synthesized by pyrolysis of kitchen derived waste tea residue (WTR) and used in the field of agriculture nanotechnology. Herein, we have explored the effect of different concentrations of WTR-CDs (10, 30 and 50 mg/L) on growth of FG with respect to various plant growth parameters. It was observed that the WTR-CDs has positive effect on all plant growth parameters investigated and also assist for micronutrient uptake which is confirmed by AAS and zeta potential measurement. UV light, Fluorescence spectroscopy, and confocal fluorescence microscopy examination were employed for the understanding of uptake and transport route of WTR-CDs in FG plant through absorption of WTR-CDs by root as well as seed coat along with water. Therefore, the growth of FG was a significant increase in quality of the plant which appears to be effective and no serious side effects were seen during the study.

Fabrication and Characterization of Anthracene Doped P-terphenyl Thin Films By Spin Coating Technique; Investigation of Fluorescence Properties.

Thin films of p-terphenyl luminophors doped by varying amounts of anthracene were prepared by using spin coating technique. The morphological, structural, and photophysical investigation of thin films of p-terphenyl as a function of anthracene concentration is studied by using scanning electron microscopy (SEM), X-ray diffraction (XRD), fluorescence spectroscopy and fluorescence microscopy. The results of XRD and SEM studies indicated that the doped p-terphenyl thin film is homogeneous as compared with a bare p-terphenyl thin film. The fluorescence spectroscopy results indicate complete quenching of p-terphenyl fluorescence and simultaneous sensitization of blue anthracene like emission towards the red side of the spectrum with maximum intensity at 410 nm. The blue intense emission of anthracene seen in fluorescence microscopy images is in agreement with observed fluorescence spectral results. A suitable mechanism of excitation energy transfer (EET) from p-terphenyl to anthracene molecules is proposed and discussed on the basis of energy level diagram. The efficient EET is believed to occur by the orientation of phenyl rings of p-terphenyl in excited state. As the concentration of doped anthracene increases, the fluorescence intensity of doped p-terphenyl and Full Width at Half Maximum (FWHM) found to be increased. The p-terphenyl film containing 0.65 moles of anthracene is of FWHM as low as 28.51 nm. Such narrow band blue emitting doped luminophors are of demand in light emitting diodes (OLED) and scintillation applications.

Dataset on the shooting and rooting ability of Morus alba using waste tea residue derived carbon dots as an alternative of growth plant stimulator.

The data article ex vitro (vegetative plant propagation) culture techniques are sustainable alternatives to the large-scale production of economically important plant species. Morus alba is an essential species that is mainly considered to be economically important due to their potential use as silk production, medicine and food. In this work, we evaluated the data of effects of different concentration of Waste Tea Residue Carbon Dots (WTR-CDs) on the ex vitro growth of morus. This dataset can be beneficial for researchers finding alternative eco-friendly, biodegradable and cost-friendly substitute for plant growth stimulator that are helpful for plant propagation during plant production program. Time consuming and low germination ratio of seeds are the most restricting triggers for commercial use for large-scale cultivation of plant species. Use of WTR-CDs in ex vitro culture technology is an appropriate alternative approach for large-scale production of plants within a short period of time.

Nitrogen-doped carbon dot threads as a "turn-off" fluorescent probe for permanganate ions and its hydrogel hybrid as a naked eye sensor for gold(III) ions.

Highly fluorescent nitrogen-doped carbon dot (NCD) threads were synthesized via simple pyrolysis of citric acid, p-hydroxybenzoic acid, and ammonia. The NCDs show excitation-independent behavior with maximum excitation and emission wavelengths of 350 nm and 435 nm, respectively. The developed probe was used as a turn-off fluorescent sensor for the selective and sensitive determination of permanganate ions in aqueous media. The probe's hydrogel hybrid displayed a beautiful purple color demonstrating its potential as a naked eye sensor for gold detection. The ratiometric sensor exhibited excellent selectivity towards permanganate ions over 27 other ions with a linear range of 510 nM to 2 µM, a detection limit of 170 nM, and a linear regression value (R2) of 0.9944. Similarly, the linear range and limit of detection for gold ions was 3.89-20 µM and 1.285 µM, respectively. The synthesized NCDs were also used as a fluorescent ink as well as a naked eye marker in association with a gold solution demonstrating its potential forensic and anti-counterfeiting applications. Graphical abstract.