Experimental-computational approach to investigate elastic properties of struvite.

The research presented in the paper concerns the elastic properties of struvite. The article combines theoretical and experimental research. Experimental studies were carried out on struvite single crystals grown in sodium metasilicate gel by single diffusion. This unique method leads to obtaining crystals of sufficiently large size to conduct, for the first time, experimental measurement of elastic properties of monocrystalline struvite. Using the nanoindentation method, the Ez = 29.1 ± 0.7 GPa value of the component of Young's modulus was determined for a struvite single crystal. In addition, the elastic constants C11, C22, and C33 were determined using micro-Brillouin spectroscopy. Theoretical calculations of the abovementioned properties have been carried out by employing density functional theory methods. Scaling of the theoretical elastic constants leads to obtaining good agreement with the experimental values. Values of the Ex and Ey components of the Young's modulus, not available from the experimental nanoindentation technique, have been determined theoretically as 23 GPa and 27 GPa, respectively. Differences in the values of elastic components and Young's modulus components are related to the layered crystal structure of struvite and directional character of the hydrogen-bonding pattern.

Tribological Characteristics of a-C:H:Si and a-C:H:SiOx Coatings Tested in Simulated Body Fluid and Protein Environment.

This paper presents the tribological properties of silicon and oxygen incorporated diamond-like carbon coatings tested in simulated body fluid and bovine serum albumin environments. The tests were performed using a ball-on-disc tribometer with an AISI316L steel counterbody. The wear tracks and wear scars were analyzed using optical microscopy and a nanoindenter. The interaction between the coating and the working environment was analyzed by Fourier transform infrared spectroscopy, whereas changes in the chemical structure before and after the tribological tests were compared with the use of Raman spectroscopy. Our study showed that the tribological parameters are governed by the presence of oxygen rather than the changing concentration of silicon. Both of the spectroscopy results confirm this statement, indicating that coatings with low concentrations of silicon and oxygen appear to be better candidates for biological applications in terms of wear resistance.

In vivo effects of aflatoxin B1 and benzo[a]pyrene on the heart muscle of chicken embryos.

The purpose of the present study was to evaluate the effects of aflatoxin B1 (AFB1) and benzo[a]pyrene (BaP) on the heart muscle of chicken embryos of the broiler line Ross 308. The benzo[a]pyrene in the organic oil solution was injected in ovo on the 6th day of the incubation in doses of: 0.1, 0.5, and 1 mg/kg weight of eggs; the aflatoxin B1 in the organic oil solution was injected in ovo on the 6th day of the incubation into the yolk in doses of 80, 120 and 240 ng/kg weight of eggs. Multiple biochemical and hepatic parameters have been observed, including sodium, potassium, chloride, cholesterol, uric acid, total proteins, aminotransferase aspartate, and aminotransferase alanine. A low dose of AFB1 and BaP administered in ovo during early embryonic development had a significant impact on chicken embryonic development, as demonstrated by alterations in biochemical, mineral, and hepatic parameters.

Amorphous AlN films grown by ALD from trimethylaluminum and monomethylhydrazine.

The great interest in aluminium nitride thin films has been attributed to their excellent dielectric, thermal and mechanical properties. Here we present the results of amorphous AlN films obtained by atomic layer deposition. We used trimethylaluminum and monomethylhydrazine as the precursors at a deposition temperature of 375-475 °C. The structural and mechanical properties and chemical composition of the synthesized films were investigated in detail by X-ray diffraction, X-ray photoelectron spectroscopy, electron and probe microscopy and nanoindentation. The obtained films were compact and continuous, exhibiting amorphous nature with homogeneous in-depth composition, at an oxygen content of as low as 4 at%. The mechanical properties were comparable to those of AlN films produced by other techniques.

Cytotoxic effect of aminoglycoside antibiotics on the mammalian cell lines.

Aminoglycoside antibiotics have been used for treating serious but also routine infections in veterinary and human medicine for many years. The basic aim of this work is to evaluate the cytotoxicity of dihydrostreptomycin and neomycin in vitro on three cell cultures - BHK-21 (Syrian golden hamster kidney fibroblast), VERO (African green monkey kidney fibroblast) and FEA (feline embryonic fibroblast) cells. The morphological changes were examined by Giemsa staining. Cells were dried and visualized under fluorescence microscope. After the exposure to different experimental doses of dihydrostreptomycin (812.5-20000 µg/mL) and neomycin (1000-20000 µg/mL) during 24 h, the viability of BHK-21, FEA and VERO cell lines were evaluated by MTT assay. Viability of BHK-21 cells significantly (P < 0.001) decreased after treatment with 3500; 5500 and 7500 µg/mL of dihydrostreptomycin and 9000; 10000 and 20000 µg/mL of neomycin. The FEA cell viability decreased significantly (P < 0.001; P < 0.01) at 2500 and 3000 µg/mL dihydrostreptomycin and at 3000 µg/mL of neomycin treatment. Only the highest concentration of dihydrostreptomycin (20000 µg/mL) reduced VERO cell viability significantly (P < 0.01). Based on or results we can assume the effect of different antibiotics in different concentrations on cell lines is various. Detection of antibiotic toxicity to animal cells is very important because of the increasing resistance of bacteria. One of the solutions is drug dose increasing, but only to a certain concentration, since the toxic effect over the therapeutic one will prevail, which we have also shown in this work.

Frictional Behaviour of Composite Anodized Layers on Aluminium Alloys.

Three variants of the micro arc oxidation (MAO) technique have been used to treat a 2017A alloy surface. The first variant was a pure anodized layer, the second an anodized layer with SiC embedded nanoparticles and the third an anodized layer with Si3N4 nanoparticles. Tribological tests were performed for all variants, on three samples for every case. Friction coefficients and wear rates were calculated on the basis of experiments. The pure anodized layer manifested friction coefficient values within the range of 0.48 ÷ 0.52 and a wear rate in the range ~10-15 m3N-1m-1. SiC nanoparticles improved the tribological properties of the layer, as indicated by a reduction of the friction coefficient values to the range of 0.20 ÷ 0.26 with preserved very high resistance against wear (wear rate ~10-15 m3N-1m-1). Si3N4 particles embedded in anodized layer deteriorated the tribological properties, with a reduction in the resistance against fatigue and wear, intensification of friction forces and a change in the nature of friction contact behavior to more abrasive-like nature (friction coefficients ranging from 0.4 to 0.6 and wear rates ~10-14 m3N-1m-1).

Comparison of Mechanical and Barrier Properties of Al2O3/TiO2/ZrO2 Layers in Oxide-Hydroxyapatite Sandwich Composite Coatings Deposited by Sol-Gel Method on Ti6Al7Nb Alloy.

In this study, coatings of different oxides (TiO2, Al2O3, ZrO2) and hydroxyapatite (HAp) as well as sandwich composite hydroxyapatite with an oxides sublayer (oxide+HAp) were deposited on Ti6Al7Nb alloy using the sol-gel dip-coating method. The coatings were characterized in terms of morphology (optical microscope), surface topography (AFM), thickness (ellipsometry), and crystal structure (XRD/GIXRD). The mechanical properties of the coatings-hardness, Young's modulus, and adhesion to the substrate-were examined using nanoindentation and scratch tests. The barrier properties of the coatings against the migration of aluminum ions were examined by measuring their concentration after soaking in Hank's balanced salt solution (HBSS) with the use of optical emission spectrometry of inductively coupled plasma (ICPOES). It was found that all the oxide and HAp coatings reduced the permeation of Al ions from the Ti6Al7Nb alloy substrate. The best features revealed an Al2O3 layer that had excellent barrier properties and the best adhesion to the substrate. Al2O3 as a sublayer significantly improved the properties of the sandwich composite HAp coating.

Mechanical, Corrosion and Biological Properties of Room-Temperature Sputtered Aluminum Nitride Films with Dissimilar Nanostructure.

Aluminum Nitride (AlN) has been long time being regarded as highly interesting material for developing sensing applications (including biosensors and implantable sensors). AlN, due to its appealing electronic properties, is envisaged lately to serve as a multi-functional biosensing platform. Although generally exploited for its intrinsic piezoelectricity, its surface morphology and mechanical performance (elastic modulus, hardness, wear, scratch and tensile resistance to delamination, adherence to the substrate), corrosion resistance and cytocompatibility are also essential features for high performance sustainable biosensor devices. However, information about AlN suitability for such applications is rather scarce or at best scattered and incomplete. Here, we aim to deliver a comprehensive evaluation of the morpho-structural, compositional, mechanical, electrochemical and biological properties of reactive radio-frequency magnetron sputtered AlN nanostructured thin films with various degrees of c-axis texturing, deposited at a low temperature (~50 °C) on Si (100) substrates. The inter-conditionality elicited between the base pressure level attained in the reactor chamber and crystalline quality of AlN films is highlighted. The potential suitability of nanostructured AlN (in form of thin films) for the realization of various type of sensors (with emphasis on bio-sensors) is thoroughly probed, thus unveiling its advantages and limitations, as well as suggesting paths to safely exploit the remarkable prospects of this type of materials.

Evaluation of the Erosive Potential of Selected Isotonic Drinks: In Vitro Studies.

BACKGROUND: Isotonic drinks are an important component of the diet of athletes. Sports drinks cause the body to maintain proper hydration and supplement minerals which are lost in sweat during excessive exercising. Aside from the benefits of isotonic drinks, it is important to be aware of the harmful effects of citric acid within the products, which could cause enamel erosion. OBJECTIVES: The aim of the study was to evaluate the erosive potential of sports drinks using confocal scanning laser microscopy (CLSM). MATERIAL AND METHODS: The studies measured the change of surface roughness of the dental enamel after etching using Isostar, Powerade and Gatorade drinks, and Fortuna orange juice. Measurements were repeated after 1, 2 and 3 h of exposure to the selected liquid. The evaluation of calcium compound contents was carried out using the complexonometric method. RESULTS: The surface roughness measurements of dental enamel showed that the lowest values of the parameters Ra and Rz were obtained for Isostar and orange juice. The research of the calcium content in the selected beverages showed the highest value in Isostar (320.0 mg/L) and the lowest in Powerade (40.0 mg/L) and Gatorade (21.0 mg/L). CONCLUSIONS: Our study confirms that Isostar is the safest sports drink, among the analyzed beverages, for athletes, because it causes the least erosive changes in dental enamel. It is recommended to supplement beverages to reduce their potential for erosion using calcium compounds.

A Fully Transparent Flexible Sensor for Cryogenic Temperatures Based on High Strength Metallurgical Graphene.

Low-temperature electronics operating in below zero temperatures or even below the lower limit of the common -65 to 125 °C temperature range are essential in medical diagnostics, in space exploration and aviation, in processing and storage of food and mainly in scientific research, like superconducting materials engineering and their applications-superconducting magnets, superconducting energy storage, and magnetic levitation systems. Such electronic devices demand special approach to the materials used in passive elements and sensors. The main goal of this work was the implementation of a fully transparent, flexible cryogenic temperature sensor with graphene structures as sensing element. Electrodes were made of transparent ITO (Indium Tin Oxide) or ITO/Ag/ITO conductive layers by laser ablation and finally encapsulated in a polymer coating. A helium closed-cycle cryostat has been used in measurements of the electrical properties of these graphene-based temperature sensors under cryogenic conditions. The sensors were repeatedly cooled from room temperature to cryogenic temperature. Graphene structures were characterized using Raman spectroscopy. The observation of the resistance changes as a function of temperature indicates the potential use of graphene layers in the construction of temperature sensors. The temperature characteristics of the analyzed graphene sensors exhibit no clear anomalies or strong non-linearity in the entire studied temperature range (as compared to the typical carbon sensor).

Pheomelanin in the skin of Hymenochirus boettgeri (Amphibia: Anura: Pipidae).

Pheomelanin is supposed to be the first type of melanin found in vertebrates, in contrast to the main type - eumelanin. Our study aimed at detecting pheomelanin in the skin of Hymenochirus boettgerii. We employed electron paramagnetic resonance (EPR) spectroscopy, and transmission electron microscopy (TEM), supplemented with standard histology and immunochemistry. We identified pheomelanin in the dorsal skin of adult frogs (not only in the dermis, but also in the epidermis) and in the dorsal tadpole. Our work identifies Hymenochirus boettgerii as a model in the basic study on the mechanism, evolution and role of melanogenesis in animals, including human.