Mechanistic Insights of Ethylene Polymerization on Phillips Chromium Catalysts.

Silica-supported chromium oxide catalysts, also named Phillips chromium catalysts (PCCs), provide more than half of the world's production of high- and medium-density polyethylenes. PCCs are usually prepared in the Cr(VI)/SiO2 form, which is subjected to reductive activation. It has been explicitly proven that CO reduces Cr(VI) to Cr(II) species that initiate ethylene polymerization; ethylene activates Cr(VI) sites as well, but the nature of the catalytic species is complicated by the presence of the ethylene oxidation products. It is widely accepted that the catalytic species are of a Cr(III)-alkyl nature, but this common assumption faces the challenge of "extra" hydrogen: the formation of similar species under the action of even-electron reducing agents requires an additional H atom. Relatively recently, it was found that saturated hydrocarbons can also activate CrOx/SiO2, and alkyl fragments turn out to be bonded with a polyethylene chain. In recent years, there have been numerous experimental and theoretical studies of the structure and chemistry of PCCs at the different stages of preparation and activation. The use of modern spectral methods (such as extended X-ray absorption fine structure (EXAFS), X-ray absorption near-edge structure (XANES), and others); operando IR, UV-vis, EPR, and XAS spectroscopies; and theoretical approaches (DFT modeling, machine learning) clarified many essential aspects of the mechanisms of CrOx/SiO2 activation and catalytic behavior. Overall, the Cosse-Arlman mechanism of polymerization on Cr(III)-alkyl centers is confirmed in many works, but its theoretical support required the development of nontrivial and contentious mechanistic concepts of Cr(VI)/SiO2 or Cr(II)/SiO2 activation. On the other hand, conflicting experimental data continue to be obtained, and certain mechanistic concepts are being developed with the use of outdated models. Strictly speaking, the main question of what type of catalytic species, Cr(II), Cr(III), or Cr(IV), comes into polymerization still has not received an unambiguous answer. The role of the chemical nature of the support-through the prism of the nature, geometry, and distribution of the active sites-is also not clear in depth. In the present review, we endeavored to summarize and discuss the recent studies in the field of the preparation, activation, and action of PCCs, with a focus on existing contradictions in the interpretation of the experimental and theoretical results.

MAO- and Borate-Free Activating Supports for Group 4 Metallocene and Post-Metallocene Catalysts of α-Olefin Polymerization and Oligomerization.

Modern industry of advanced polyolefins extensively uses Group 4 metallocene and post-metallocene catalysts. High-throughput polyolefin technologies demand the use of heterogeneous catalysts with a given particle size and morphology, high thermal stability, and controlled productivity. Conventional Group 4 metal single-site heterogeneous catalysts require the use of high-cost methylalumoxane (MAO) or perfluoroaryl borate activators. However, a number of inorganic phases, containing highly acidic Lewis and Brønsted sites, are able to activate Group 4 metal pre-catalysts using low-cost and affordable alkylaluminums. In the present review, we gathered comprehensive information on MAO- and borate-free activating supports of different types and discussed the surface nature and chemistry of these phases, examples of their use in the polymerization of ethylene and α-olefins, and prospects of the further development for applications in the polyolefin industry.

Dispersant and Protective Roles of Amphiphilic Poly(ethylene phosphate) Block Copolymers in Polyester/Bone Mineral Composites.

Composites of synthetic bone mineral substitutes (BMS) and biodegradable polyesters are of particular interest for bone surgery and orthopedics. Manufacturing of composite scaffolds commonly uses mixing of the BMS with polymer melts. Melt processing requires a high homogeneity of the mixing, and is complicated by BMS-promoted thermal degradation of polymers. In our work, poly(L-lactide) (PLLA) and poly(ε-caprolactone) (PCL) composites reinforced by commercial ß-tricalcium phosphate (ßTCP) or synthesized carbonated hydroxyapatite with hexagonal and plate-like crystallite shapes (hCAp and pCAp, respectively) were fabricated using injection molding. pCAp-based composites showed advanced mechanical and thermal characteristics, and the best set of mechanical characteristics was observed for the PLLA-based composite containing 25 wt% of pCAp. To achieve compatibility of polyesters and pCAp, reactive block copolymers of PLLA or PCL with poly(tert-butyl ethylene phosphate) (C1 and C2, respectively) were introduced to the composite. The formation of a polyester-b-poly(ethylene phosphoric acid) (PEPA) compatibilizer during composite preparation, followed by chemical binding of PEPA with pCAp, have been proved experimentally. The presence of 5 wt% of the compatibilizer provided deeper homogenization of the composite, resulting in a marked increase in strength and moduli as well as a more pronounced nucleation effect during isothermal crystallization. The use of C1 increased the thermal stability of the PLLA-based composite, containing 25 wt% of pCAp. In view of positive impacts of polyester-b-PEPA on composite homogeneity, mechanical characteristics, and thermal stability, polyester-b-PEPA will find application in the further development of composite materials for bone surgery and orthopedics.

Mesoscale Simulations of Structure Formation in Polyacrylonitrile Nascent Fibers Induced by Binary Solvent Mixture.

Polyacrylonitrile (PAN) is widely used as a raw material for the production of high-modulus carbon fibers, the internal structure of which is directly affected by the spinning of the precursor. Although PAN fibers have been studied for a long time, the formation of their internal structure has not been sufficiently investigated theoretically. This is due to the large number of stages in the process and the parameters controlling them. In this study, we present a mesoscale model describing the evolution of nascent PAN fibers during the coagulation. It is constructed within the framework of a mesoscale dynamic density functional theory. We use the model to study the influence of a combined solvent of dimethyl sulfoxide (DMSO, a good solvent) and water (a non-solvent) on the microstructure of the fibers. A porous structure of PAN is formed as a result of the microphase separation of the polymer and the residual combined solvent at a high water content in the system. The model shows that one of the possible ways to obtain the homogeneous fiber structure is to slow down the coagulation by increasing the amount of good solvent in the system. This result is in agreement with the existing experimental data and confirms the efficiency of the presented model.

The insulator BEAF32 controls the spatial-temporal expression profile of the telomeric retrotransposon TART in the Drosophila germline.

Insulators are architectural elements implicated in the organization of higher-order chromatin structures and transcriptional regulation. However, it is still unknown how insulators contribute to Drosophila telomere maintenance. Although the Drosophila telomeric retrotransposons HeT-A and TART occupy a common genomic niche, they are regulated independently. TART elements are believed to provide reverse transcriptase activity, whereas HeT-A transcripts serve as a template for telomere elongation. Here, we report that insulator complexes associate with TART and contribute to its transcriptional regulation in the Drosophila germline. Chromatin immunoprecipitation revealed that the insulator complex containing BEAF32, Chriz, and DREF proteins occupy the TART promoter. BEAF32 depletion causes derepression and chromatin changes at TART in ovaries. Moreover, an expansion of TART copy number was observed in the genome of the BEAF32 mutant strain. BEAF32 localizes between the TART enhancer and promoter, suggesting that it blocks enhancer-promoter interactions. Our study found that TART repression is released in the germ cysts as a result of the normal reduction of BEAF32 expression at this developmental stage. We suggest that coordinated expression of telomeric repeats during development underlies telomere elongation control.

Sensitivity of Neuroblastoma and Induced Neural Progenitor Cells to High-Intensity THz Radiation.

THz radiation induces a variety of processes in cells and has attracted the attention of researchers in recent decades. Here, data on the effects of high-intensity terahertz (THz) radiation on human directly reprogrammed neural progenitor cells (drNPCs) and on neuroblastoma cells (SK-N-BE (2)) were obtained for the first time. The results demonstrated that the exposure of non-tumor and tumor cells to broadband (0.1-3 THz) THz pulses with the intensity of 21 GW/cm2 and the electric field strength of 2.8 MV/cm for 30 min induced neither a noticeable genotoxic effect nor a statistically significant change in the proliferative activity and cell differentiation. It was also shown that the combined effect of THz radiation and salinomycin, a promising antitumor agent, on neuroblastoma cells did not enhance the genotoxic effect of this antibiotic. However, further studies involving chemotherapy drugs and other exposure parameters are warranted to introduce this new concept into anti-tumor clinical practice and to enhance the efficacy of the existing approaches.

Studying the genotoxic effects of high intensity terahertz radiation on fibroblasts and CNS tumor cells.

The data is obtained on the effect of high-intensity pulses of terahertz (THz) radiation with a broad spectrum (0.2-3 THz) on cell cultures. We have evaluated the threshold exposure parameters of THz radiation causing genotoxic effects in fibroblasts. Phosphorylation of histone H2AX at Ser 139 (γH2AX) was chosen as a marker for genotoxicity and a quantitative estimation of γH2AX foci number in fibroblasts was performed after cell irradiation with THz pulses for 30 min. No genotoxic effects of THz radiation were observed in fibroblasts unless peak intensity and electric field strength exceeded 21 GW cm-2 and 2.8 MV cm-1 , respectively. In tumor cell lines (neuroblastoma (SK-N-BE (2)) and glioblastoma (U87)), exposure to THz pulses with peak intensity of 21 GW cm-2 for 30 min caused no morphological changes as well as no statistically significant increase in histone phosphorylation foci number.

Coordination Polymers of Polyphenyl-Substituted Potassium Cyclopentadienides.

A series of potassium salts of di- and tri-arylsubstituted cyclopentadienes has been obtained by the metalation of the corresponding cyclopentadienes with benzylpotassium in THF media. Crystals of all compounds, afforded by recrystallization from THF/hexane, diglyme-THF/hexane and toluene/hexane mixtures, have been studied by X-ray diffraction. All studied potassium cyclopentadienides exhibit the luminescence at room temperature and overall quantum yield of photoluminescence for potassium salt of diarylsubstituted cyclopentadiene is 18%.

Self-assembly in systems based on L-cysteine-silver-nitrate aqueous solution: multiscale computer simulation.

We use fully atomistic, quantum mechanics and mesoscopic simulations to investigate multiscale structure formation in a supramolecular system based on aqueous solutions of silver nitrate with L-cysteine (CSS). Fully atomistic modeling reveals that silver mercaptide clusters are formed in solution at the stage of aging, which has a pronounced "core-shell" structure. The core is formed due to the bonding of SAg groups of silver mercaptide (SM) zwitterions while the shell consists of NH3+ and C(O)O- groups. Self-assembly of large-scale aggregates in CSS occurs due to the interaction of SM functional groups located on the surface of the clusters, which allows them to be considered supramonomers. Quantum-mechanical calculations reveal additional insight into the intermolecular interaction of L-cysteine with the components of the system. The data on the structure and properties of supramonomers are used to develop and parameterize a mesoscopic CSS model supplemented with allowance for salt concentration. In the mesoscopic model, supramonomers are presented as "sticky spheres", the interaction between which is determined by short-range and screened Coulomb potentials. Depending on the salt concentration, all structural transitions typical of CSS are observed: the formation of a stabilized colloidal dispersion, the filamentary aggregates of a gel network, the formation of large-scale unbound aggregates, and precipitation. These stages qualitatively reproduce the experimentally observed behavior of a real solution.

The Use of Branching Agents in the Synthesis of PBAT.

Biodegradable polyesters represent an advanced alternative to polyolefin plastics in various applications. Polybutylene adipate terephthalate (PBAT) can compete with polyolefins in terms of their mechanical characteristics and melt processing conditions. The properties of PBAT depend on the molecular weight, dispersity, and architecture of the copolymer. Long-chain branching (LCB) of the PBAT backbone is an efficient method for the improvement of the copolymer characteristics. In the present work, we studied branching agents (BAs) 1-7 of different structures in the two-stage polycondensation of 1,4-butanediol, dimethyl terephthalate, and adipic acid and investigated the composition and melt rheology of the copolymers. According to the results of the research, 1,1,1-tris(hydroxymethyl)ethane 2 and 3-hydroxy-2-(hydroxymethyl)-2-methylpropanoic acid 5 outperformed glycerol 1 as BAs in terms of shear thinning behavior and viscoelasticity.

Effect of Nanoparticles Surface Bonding and Aspect Ratio on Mechanical Properties of Highly Cross-Linked Epoxy Nanocomposites: Mesoscopic Simulations.

The paper aims to study the mechanical properties of epoxy resin filled with clay nanoparticles (NPs), depending on their shapes and content on the surface of a modifying agent capable of forming covalent bonds with a polymer. The cylindrical clay nanoparticles with equal volume and different aspects ratios (disks, barrel, and stick) are addressed. The NPs' bonding ratio with the polymer (RGC) is determined by the fraction of reactive groups and conversion time and varies from RGC = 0 (non-bonded nanoparticles) to RGC = 0.65 (more than half of the surface groups are linked with the polymer matrix). The performed simulations show the so-called load-bearing chains (LBCs) of chemically cross-linked monomers and modified nanoparticles to determine the mechanical properties of the simulated composites. The introduction of nanoparticles leads to the breaking of such chains, and the chemical cross-linking of NPs with the polymer matrix restores the LBCs and strengthens the composite. At small values of RGC, the largest value of the elastic modulus is found for systems filled with nanoparticles having the smallest surface area, and at high values of RGC, on the contrary, the systems containing disk-shaped particles with the largest surface area have a larger elastic modulus than the others. All calculations are performed within the framework of a mesoscopic model based on accurate mapping of the atomistic structures of the polymer matrix and nanoparticles into coarse-grained representations, which, if necessary, allow reverse data mapping and quantitative assessment of the state of the filled epoxy resin. On the other hand, the obtained data can be used to design the functional materials with specified mechanical properties based on other practically significant polymer matrices and nanofillers.

Antibacterial Poly(ε-CL)/Hydroxyapatite Electrospun Fibers Reinforced by Poly(ε-CL)-b-poly(ethylene phosphoric acid).

In bone surgery and orthopedics, bioresorbable materials can be helpful in bone repair and countering post-op infections. Explicit antibacterial activity, osteoinductive and osteoconductive effects are essential to achieving this objective. Nonwoven electrospun (ES) fibers are receiving the close attention of physicians as promising materials for wound dressing and tissue engineering; potentially, in high contrast with dense materials, ES mats hamper regeneration of the bone extracellular matrix to a lesser extent. The use of the compositions of inherently biodegradable polyesters (poly(ε-caprolactone) PCL, poly(lactoglycolide), etc.), calcium phosphates and antibiotics is highly prospective, but the task of forming ES fibers from such compositions is complicated by the incompatibility of the main organic and inorganic ingredients, polyesters and calcium phosphates. In the present research we report the synthesis of hydroxyapatite (HAp) nanoparticles with uniform morphology, and demonstrate high efficiency of the block copolymer of PCL and poly(ethylene phosphoric acid) (PEPA) as an efficient compatibilizer for PCL/HAp mixtures that are able to form ES fibers with improved mechanical characteristics. The materials obtained in the presence of vancomycin exhibited incremental drug release against Staphylococcus aureus (St. aureus).

Additive-induced ordered structures formed by PC71BM fullerene derivatives.

We report the results of an experimental and theoretical study of structure formation in mixtures of phenyl-C71-butyric acid methyl ester (PC71BM) with high boiling octane based solvent additives 1,8-octanedithiol (ODT), 1,8-dibromooctane, and 1,8-diiodooctane obtained by evaporation of a host-solvent (chlorobenzene). Experimental studies by DSC, SAXS and WAXS methods found evidence of crystallization of fullerenes in the presence of the high boiling additives in the mixtures. A molecular dynamics simulation of a PC71BM/ODT mixture revealed the self-assembly of fullerenes into sponge-like network structures.

In Vitro and In Vivo Studies of Biodegradability and Biocompatibility of Poly(εCL)-b-Poly(EtOEP)-Based Films.

The control of surface bioadhesive properties of the subcutaneous implants is essential for the development of biosensors and controlled drug release devices. Poly(alkyl ethylene phosphate)-based (co)polymers are structurally versatile, biocompatible and biodegradable, and may be regarded as an alternative to poly(ethylene glycol) (PEG) copolymers in the creation of antiadhesive materials. The present work reports the synthesis of block copolymers of ε-caprolactone (εCL) and 2-ethoxy-1,3,2-dioxaphospholane-2-oxide (ethyl ethylene phosphate, EtOEP) with different content of EtOEP fragments, preparation of polymer films, and the results of the study of the impact of EtOEP/εCL ratio on the hydrophilicity (contact angle of wetting), hydrolytic stability, cytotoxicity, protein and cell adhesion, and cell proliferation using umbilical cord multipotent stem cells. It was found that the increase of EtOEP/εCL ratio results in increase of hydrophilicity of the polymer films with lowering of the protein and cell adhesion. MTT cytotoxicity test showed no significant deviations in toxicity of poly(εCL) and poly(εCL)-b-poly(EtOEP)-based films. The influence of the length of poly(EtOEP)chain in block-copolymers on fibrotic reactions was analyzed using subcutaneous implantation experiments (Wistar line rats), the increase of the width of the fibrous capsule correlated with higher EtOEP/εCL ratio. However, the copolymer-based film with highest content of polyphosphate had been subjected to faster degradation with a formation of developed contact surface of poly(εCL). The rate of the degradation of polyphosphate in vivo was significantly higher than the rate of the degradation of polyphosphate in vitro, which only confirms an objective value of in vivo experiments in the development of polymer materials for biomedical applications.

Comparative Experimental and Theoretical Study of Mg, Al and Zn Aryloxy Complexes in Copolymerization of Cyclic Esters: The Role of the Metal Coordination in Formation of Random Copolymers.

Homogeneity of copolymers is a general problem of catalytic coordination polymerization. In ring-opening polymerization of cyclic esters, the rational design of the catalyst is generally applied to solve this problem by the equalization of the reactivities of comonomers-however, it often leads to a reduction of catalytic activity. In the present paper, we studied the catalytic behavior of BnOH-activated complexes (ВНТ)Mg(THF)2nBu (1), (ВНТ)2AlMe (2) and [(ВНТ)ZnEt]2 (3), based on 2,6-di-tert-butyl-4-methylphenol (BHT-H) in homo- and copolymerization of L-lactide (lLA) and ε-caprolactone (εCL). Even at 1:5 lLA/εCL ratio Mg complex 1 catalyzed homopolymerization of lLA without involving εCL to the formation of the polymer backbone. On the contrary, Zn complex 3 efficiently catalyzed random lLA/εCL copolymerization; the presence of mono-lactate subunits in the copolymer chain clearly pointed to the transesterification mechanism of copolymer formation. Both epimerization and transesterification side processes were analyzed using the density functional theory (DFT) modeling that confirmed the qualitative difference in catalytic behavior of 1 and 3: Mg and Zn complexes demonstrated different types of preferable coordination on the PLA chain (k2 and k3, respectively) with the result that complex 3 catalyzed controlled εCL ROP/PLA transesterification, providing the formation of lLA/εCL copolymers that contain mono-lactate fragments separated by short oligo(εCL) chains. The best results in the synthesis of random lLA/εCL copolymers were obtained during experiments on transesterification of commercially available PLLA, the applicability of 3/BnOH catalyst in the synthesis of random copolymers of εCL with methyl glycolide, ethyl ethylene phosphonate and ethyl ethylene phosphate was also demonstrated.

Epigenetic Requirements for Triggering Heterochromatinization and Piwi-Interacting RNA Production from Transgenes in the Drosophila Germline.

Transgenes containing a fragment of the I retrotransposon represent a powerful model of piRNA cluster de novo formation in the Drosophila germline. We revealed that the same transgenes located at different genomic loci form piRNA clusters with various capacity of small RNA production. Transgenic piRNA clusters are not established in piRNA pathway mutants. However, in the wild-type context, the endogenous ancestral I-related piRNAs heterochromatinize and convert the I-containing transgenes into piRNA-producing loci. Here, we address how the quantitative level of piRNAs influences the heterochromatinization and piRNA production. We show that a minimal amount of maternal piRNAs from ancestral I-elements is sufficient to form the transgenic piRNA clusters. Supplemental piRNAs stemming from active I-element copies do not stimulate additional chromatin changes or piRNA production from transgenes. Therefore, chromatin changes and piRNA production are initiated by a minimum threshold level of complementary piRNAs, suggesting a selective advantage of prompt cell response to the lowest level of piRNAs. It is noteworthy that the weak piRNA clusters do not transform into strong ones after being targeted by abundant I-specific piRNAs, indicating the importance of the genomic context for piRNA cluster establishment. Analysis of ovarian transcription profiles suggests that regions facilitating convergent transcription favor the formation of transgenic piRNA clusters.

OT-82, a novel anticancer drug candidate that targets the strong dependence of hematological malignancies on NAD biosynthesis.

Effective treatment of some types of cancer can be achieved by modulating cell lineage-specific rather than tumor-specific targets. We conducted a systematic search for novel agents selectively toxic to cells of hematopoietic origin. Chemical library screenings followed by hit-to-lead optimization identified OT-82, a small molecule with strong efficacy against hematopoietic malignancies including acute myeloblastic and lymphoblastic adult and pediatric leukemias, erythroleukemia, multiple myeloma, and Burkitt's lymphoma in vitro and in mouse xenograft models. OT-82 was also more toxic towards patients-derived leukemic cells versus healthy bone marrow-derived hematopoietic precursors. OT-82 was shown to induce cell death by inhibiting nicotinamide phosphoribosyltransferase (NAMPT), the rate-limiting enzyme in the salvage pathway of NAD synthesis. In mice, optimization of OT-82 dosing and dietary niacin further expanded the compound's therapeutic index. In toxicological studies conducted in mice and nonhuman primates, OT-82 showed no cardiac, neurological or retinal toxicities observed with other NAMPT inhibitors and had no effect on mouse aging or longevity. Hematopoietic and lymphoid organs were identified as the primary targets for dose limiting toxicity of OT-82 in both species. These results reveal strong dependence of neoplastic cells of hematopoietic origin on NAMPT and introduce OT-82 as a promising candidate for the treatment of hematological malignancies.

Chromium complexes bearing disubstituted organophosphate ligands and their use in ethylene polymerization.

The crystal structures of three unusual chromium organophosphate complexes have been determined, namely, bis(µ-butyl 2,6-di-tert-butyl-4-methylphenyl hydrogen phosphato-κO:κO')di-µ-hydroxido-bis[(butyl 2,6-di-tert-butyl-4-methylphenyl hydrogen phosphato-κO)(butyl 2,6-di-tert-butyl-4-methylphenyl phosphato-κO)chromium](Cr-Cr) heptane disolvate or {Cr2(µ2-OH)2[µ2-PO2(OBu)(O-2,6-tBu2-4-MeC6H2)-κO:κO']2[PO2(OBu)(O-2,6-tBu2-4-MeC6H2)-κO]2[HOPO(OBu)(O-2,6-tBu2-4-MeC6H2)-κO]2}·2C7H16, [Cr2(C19H32O4P)4(C19H33O4P)2(OH)2]·2C7H16, denoted (1)·2(heptane), [µ-bis(2,6-diisopropylphenyl) phosphato-1κO:2κO']bis[bis(2,6-diisopropylphenyl) phosphato]-1κO,2κO-chlorido-2κCl-triethanol-1κ2O,2κO-di-µ-ethanolato-1κ2O:2κ2O-dichromium(Cr-Cr) ethanol monosolvate or {Cr2(µ2-OEt)2[µ2-PO2(O-2,6-iPr2-C6H3)2-κO:κO'][PO2(O-2,6-iPr2-C6H3)2-κO]2Cl(EtOH)3}·EtOH, [Cr2(C2H5O)2(C24H34O4P)3Cl(C2H6O)3]·C2H6O, denoted (2)·EtOH, and di-µ-ethanolato-1κ2O:2κ2O-bis{[bis(2,6-diisopropylphenyl) hydrogen phosphato-κO][bis(2,6-diisopropylphenyl) phosphato-κO]chlorido(ethanol-κO)chromium}(Cr-Cr) benzene disolvate or {Cr2(µ2-OEt)2[PO2(O-2,6-iPr2-C6H3)2-κO]2[HOPO(O-2,6-iPr2-C6H3)2-κO]2Cl2(EtOH)2}·2C6H6, [Cr2(C2H5O)2(C24H34O4P)2(C24H35O4P)2Cl2(C2H6O)2]·2C6H6, denoted (3)·2C6H6. Complexes (1)-(3) have been synthesized by an exchange reaction between the in-situ-generated corresponding lithium or potassium disubstituted phosphates with CrCl3(H2O)6 in ethanol. The subsequent crystallization of (1) from heptane, (2) from ethanol and (3) from an ethanol/benzene mixture allowed us to obtain crystals of (1)·2(heptane), (2)·EtOH and (3)·2C6H6, whose structures have the monoclinic P21, orthorhombic P212121 and triclinic P-1 space groups, respectively. All three complexes have binuclear cores with a single Cr-Cr bond, i.e. Cr2O6P2 in (1), Cr2PO4 in (2) and Cr2O2 in (3), where the Cr atoms are in distorted octahedral environments, formally having 16 e per Cr atom. The complexes have bridging ligands µ2-OH in (1) or µ2-OEt in (2) and (3). The organophosphate ligands demonstrate terminal κO coordination modes in (1)-(3) and bridging µ2-κO:κO' coordination modes in (1) and (2). All the complexes exhibit hydrogen bonding: two intramolecular Ophos...H-Ophos interactions in (1) and (3) form two {H[PO2(OR)2]2} associates; two intramolecular Cl...H-OEt hydrogen bonds additionally stabilize the Cr2O2 core in (3); two intramolecular Ophos...H-OEt interactions and two O...H-O intermolecular hydrogen bonds with a noncoordinating ethanol molecule are observed in (2)·EtOH. The presence of both basic ligands (OH- or OEt-) and acidic [H(phosphate)2]- associates at the same metal centres in (1) and (3) is rather unusual. Complexes may serve as precatalysts for ethylene polymerization under mild conditions, providing polyethylene with a small amount of short-chain branching. The formation of a small amount of α-olefins has been detected in this reaction.

Data for quantum-chemical modeling of the mechanisms of ring-opening polymerization of methyl ethylene phosphate.

The data presented in this paper are related to the research article entitled "Mechanistic study of transesterification in TBD-catalyzed ring-opening polymerization of methyl ethylene phosphate" (Nifant'ev et al., 2019). In this data article, we present 3D molecular information of 76 structures for TBD-catalyzed transformations of methyl ethylene phosphate (MeOEP) and trimethyl phosphate (TMP). We also present 3D molecular information for 24 complexes that model the reaction profile of transesterification of poly(MeOEP) and TMP catalyzed by 2,6-di-tert-butyl-4-methylphenoxy magnezium species, complementing the article "Mechanistic insights of BHT-Mg-catalyzed ethylene phosphate's coordination ring-opening polymerization: DFT modeling and experimental data" (Nifant'ev et al., 2018). The data contains stationary points and transition states (TS) along the first propagation step of MeOEP ring-opening polymerization (ROP) for alternative amide and donor-acceptor mechanisms, initiated by EtOH in the presence of TBD; stationary points and TS for MeOH and HOCH2CH2OP(O)(OMe)2 initiated ROP of MeOEP; and stationary points and TS for transesterification of poly(MeOEP) and TMP. In addition, the data contains stationary points and transition states for the ROP of MeOEP and transesterification of poly(MeOEP) and TMP catalyzed by 2,6-di-tert-butylphenoxy magnesium complex. The data are provided in a PDB format that can be used for further studies.

Bis[µ-bis-(2,6-diiso-propyl-phen-yl) phosphato-κ2 O:O']bis-[(2,2'-bi-pyridine-κ2 N,N')lithium] toluene disolvate and its catalytic activity in ring-opening polymerization of ∊-caprolactone and l-dilactide.

The solvated centrosymmmtric title compound, [Li2(C24H34O4P)2(C10H8N2)2]·2C7H8, was formed in the reaction between {Li[(2,6-iPr2C6H3-O)2POO](MeOH)3}(MeOH) and 2,2'-bi-pyridine (bipy) in toluene. The structure has monoclinic (P21/n) symmetry at 120 K and the asymmetric unit consists of half a complex mol-ecule and one mol-ecule of toluene solvent. The diaryl phosphate ligand demonstrates a µ-κO:κO'-bridging coordination mode and the 2,2'-bi-pyridine ligand is chelating to the Li+ cation, generating a distorted tetra-hedral LiN2O2 coordination polyhedron. The complex exhibits a unique dimeric Li2O4P2 core. One isopropyl group is disordered over two orientations in a 0.621 (4):0.379 (4) ratio. In the crystal, weak C-H⋯O and C-H⋯π inter-actions help to consolidate the packing. Catalytic systems based on the title complex and on the closely related complex {Li[(2,6-iPr2C6H3-O)2POO](MeOH)3}(MeOH) display activity in the ring-opening polymerization of ∊-caprolactone and l-dilactide.