Dispersion curve engineering for automated topology design of a unit cell in spoof surface plasmon polaritons.

In this paper, an automatic design method is proposed for unit cell in spoof surface plasmon polaritons (SSPP) with an almost arbitrary dispersion curve. In this method, the pixel configuration is considered for the unit cell and, by using the binary particle swarm optimization method, the proper topology of the unit cell is explored so as to reach the target dispersion curve. Unlike the traditional method of controlling the dispersion curve, which is performed based on changing the geometric parameters of the predetermined unit cell, in this method, there is no need to know the shape of the unit cell, and the dispersion curve of the modes of SSPP unit cell can be controlled independently with more freedom. Two unit cell samples are designed in order to show the efficiency of the procedure. In the first sample, the dispersion curve is designed to have the lowest asymptotic frequency; in the second sample, the dispersion curve of the second mode is controlled independently from the first mode and is changed arbitrarily. SSPP transmission lines which are related to the unit cells of the two samples are designed, and it is demonstrated that measurement and simulation results are greatly in line with each other.

A two-dimensional grating surface made of quaternary Huygens elements excited by a real source.

In this article, a new method to create an anomalous reflection in the desired direction is proposed. Two-dimensional grating surfaces consisting of four particles with the properties of a Huygens source are employed in each period. Then, this method is extended to the problem in which the grating surface is illuminated by a real source such as a horn. In this case, the designed grating surface has different periods in both directions to collimate the reflected wave and give an in-phase wavefront. Using our method, a high-efficiency reflectarray (RA) based on quaternary Huygens grating is designed. This RA is distinguished from common RAs due to its beam squint capability. This array offers more aperture efficiency and thus more gain in comparison to the leaky waves that inherently have low aperture efficiency. Therefore, our designed RA can compete with leaky wave antennas in many applications. The mentioned RA is designed to have the main beam in the direction of [Formula: see text], at the frequency of 12 GHz. The simulation results show the realized gain and SLL of this antenna are 24.8 dB and [Formula: see text] dB, respectively. Also, by changing the frequency in the range of 12-15 GHz, the direction of the main beam varies from [Formula: see text] to [Formula: see text].

A Spoof Surface Plasmon Polaritons (SSPPs) Based Dual-Band-Rejection Filter with Wide Rejection Bandwidth.

This paper presents a novel single-layer dual band-rejection-filter based on Spoof Surface Plasmon Polaritons (SSPPs). The filter consists of an SSPP-based transmission line, as well as six coupled circular ring resonators (CCRRs) etched among ground planes of the center corrugated strip. These resonators are excited by electric-field of the SSPP structure. The added ground on both sides of the strip yields tighter electromagnetic fields and improves the filter performance at lower frequencies. By removing flaring ground in comparison to prevalent SSPP-based constructions, the total size of the filter is significantly decreased, and mode conversion efficiency at the transition from co-planar waveguide (CPW) to the SSPP line is increased. The proposed filter possesses tunable rejection bandwidth, wide stop bands, and a variety of different parameters to adjust the forbidden bands and the filter's cut-off frequency. To demonstrate the filter tunability, the effect of different elements like number (n), width (WR), radius (RR) of CCRRs, and their distance to the SSPP line (yR) are surveyed. Two forbidden bands, located in the X and K bands, are 8.6-11.2 GHz and 20-21.8 GHz. As the proof-of-concept, the proposed filter was fabricated, and a good agreement between the simulation and experiment results was achieved.

Dual-frequency dual orthogonal polarization wave multiplexing using decoupled pixels based on Holographic technique.

The holographic technique is a promising way to manipulate light distribution and wave-front in the optical regime. In recent years, many researchers have extended this concept to microwave regime to manipulate phase, amplitude, and polarization of waves in a convenient way revealing diverse intriguing applications. Unlike the previous studies with optimization-based schemes, in this paper, we propose a simple route to design dual frequency dual-polarization holographic metasurfaces with negligible interference between the operating (lower and upper) frequencies. For this purpose, a Jerusalem-shape unit-cell is used to realize two distinct impedance distributions which yield two decoupled field profiles over the aperture of the metasurface at each frequency band. Consequently, the proposed metasurface radiator can operate in two frequency bands, independently. Each set of horizontal (vertical) cross-bars of the Jerusalem-shape unit-cell is illuminated by a vertical (horizontal) feeding network from one side of the metasurface. Side feeding has a null-free advantage, this undesired null emerges in central feeding metasurfaces and leads to an undesirable rabbit's ears phenomenon. As the proof-of-concept, a prototype of the metasurface radiator for operating at 11.5 GHz and 14 GHz is fabricated and measured. The experimental results depict a good agreement with the full-wave simulations.

Shaping Electromagnetic Waves with Flexible and Continuous Control of the Beam Directions Using Holography and Convolution Theorem.

In this article, several versatile electromagnetic (EM) waves are presented with predefined shapes and directions based on the holography and convolution theorem. Inspiring the holography theory, a reflective interferogram is characterized by interfering the near field distributions of the object and reference waves. In this regard, the interference pattern on the hologram could be viewed as the inverse Fourier transform of the object and reference waves. Therefore, the capability of steering the EM shaped beam is realized using the convolution theorem (as an interesting property of the Fourier transform), which makes a link between the hologram impedance-pattern and far-field pattern domains. The main advantage of incorporating the holography concept and convolution theorem is realizing arbitrary shaped-beam EM waves with the possibility of flexible manipulation of the beam directions without employing any optimization algorithm and mathematical computation. It is demonstrated that the method could implement a combination of simple beams (such as collimated beams) and complex beams (such as cosecant squared, flat top, isoflux beams, etc.) with each beam possessing arbitrary direction by the same design topology. To experimentally verify the concept, a prototype of the hologram with three separate beams including two tilted cosecant squared shaped beam and one broadside pencil beam is fabricated and measured. The measured results show a significant agreement between theoretical findings.