Functional Coupling of Biohybrid Photosynthetic Antennae and Reaction Center Complexes: Quantitative Comparison with Native Antennae.

Light-harvesting (LH) complexes in photosynthetic organisms absorb photons within limited wavelength ranges over a broad solar spectrum. Extension of the LH wavelength has been realized by attaching artificial fluorophores to LH complexes (biohybrid LH complexes) for complementing the limited-wavelength regions. However, how efficiently such fluorophores in biohybrid LH complexes function to drive the photocatalytic reaction center (RC) has not been quantitatively evaluated, specifically in comparison with native LH antenna complexes. In this study, we prepared various biohybrid LH1-RC complexes (from Rhodopseudomonas palustris), to quantitatively evaluate the LH activity of the attached external chromophores through a photocurrent generation reaction by LH1-RC on an electrode. For a direct comparison of the LH activity among the LH chromophores that were examined, we introduced the k1 term, which represents the extent of the functional coupling of LH and the photochemical reactions in the RC. We determined that the hydrophobic fluorophore ATTO647N attached to LH1 possesses the highest LH activity among the examined hydrophilic fluorophores such as Alexa647, and its activity is comparable to that of native LH1(-RC). The LH activity of LH2 (from Rhodoblastus acidophilus strain 10050) and its biohybrid LH2s were examined for the comprehensive assessment of their LH activity.

Atomic force microscopic analysis of the light-harvesting complex 2 from purple photosynthetic bacterium Thermochromatium tepidum.

Structural information on the circular arrangements of repeating pigment-polypeptide subunits in antenna proteins of purple photosynthetic bacteria is a clue to a better understanding of molecular mechanisms for the ring-structure formation and efficient light harvesting of such antennas. Here, we have analyzed the ring structure of light-harvesting complex 2 (LH2) from the thermophilic purple bacterium Thermochromatium tepidum (tepidum-LH2) by atomic force microscopy. The circular arrangement of the tepidum-LH2 subunits was successfully visualized in a lipid bilayer. The average top-to-top distance of the ring structure, which is correlated with the ring size, was 4.8 ± 0.3 nm. This value was close to the top-to-top distance of the octameric LH2 from Phaeospirillum molischianum (molischianum-LH2) by the previous analysis. Gaussian distribution of the angles of the segments consisting of neighboring subunits in the ring structures of tepidum-LH2 yielded a median of 44°, which corresponds to the angle for the octameric circular arrangement (45°). These results indicate that tepidum-LH2 has a ring structure consisting of eight repeating subunits. The coincidence of an octameric ring structure of tepidum-LH2 with that of molischianum-LH2 is consistent with the homology of amino acid sequences of the polypeptides between tepidum-LH2 and molischianum-LH2.

Energy transfer dynamics and the mechanism of biohybrid photosynthetic antenna complexes chemically linked with artificial chromophores.

A light-harvesting strategy is crucial for the utilisation of solar energy. In this study, we addressed the expanding light-harvesting (LH) wavelength of photosynthetic LH complex 2 (LH2, from Rhodoblastus acidophilus strain 10050) through covalent conjugation with extrinsic chromophores. To further understand the conjugation architecture and mechanism of excitation energy transfer (EET), we examined the effects of the linker length and spectral overlap integral between the emission and absorption spectra of the energy donor and acceptor pigments. In the former case, contrary to the intuition based on the Förster resonance energy transfer (FRET) theory, the observed energy transfer rate was similar regardless of the linker length, and the energy transfer efficiency increased with longer linkers. In the latter case, despite the energy transfer rate increases at higher spectral overlaps, it was quantitatively inconsistent with the FRET theory. The mechanism of EET beyond the FRET theory was discussed in terms of the higher-lying exciton state of B850, which mediates efficient EET despite the small spectral overlap. This systematic investigation provides insights for the development of efficient artificial photosynthetic systems.

Ultrafast energy transfer between self-assembled fluorophore and photosynthetic light-harvesting complex 2 (LH2) in lipid bilayer.

Photosynthetic light-harvesting (LH) systems consist of photosynthetic pigments, which are non-covalently self-assembled with protein scaffolds in many phototrophs and attain highly efficient excitation energy transfer via ultrafast dynamics. In this study, we constructed a biohybrid LH system composed of an LH complex (LH2) from Rhodoblastus acidophilus strain 10050 and a hydrophobic fluorophore ATTO647N (ATTO) as an extrinsic antenna in the lipid bilayer. Through the addition of ATTOs into a solution of LH2-reconstituted lipid vesicles, ATTOs were incorporated into the hydrophobic interior of the lipid bilayer to configure the non-covalently self-assembled biohybrid LH. Steady-state fluorescence spectroscopy clearly showed efficient energy transfer from ATTO to B850 bacteriochlorophylls in LH2. Femtosecond transient absorption spectroscopy revealed that the energy transfer took place in the time range of 3-13 ps, comparable to that of the covalently linked LH2-ATTO that we previously reported. In addition, the biohybrid LH system exhibited a much higher antenna effect than the LH2-ATTO system because of the higher loading level of ATTO in the membrane. These findings suggest that the facile self-assembled biohybrid LH system is a promising system for constructing LH for solar-energy conversion.

Sequential energy transfer driven by monoexponential dynamics in a biohybrid light-harvesting complex 2 (LH2).

Enhancing the light-harvesting potential of antenna components in a system of solar energy conversion is an important topic in the field of artificial photosynthesis. We constructed a biohybrid light-harvesting complex 2 (LH2) engineered from Rhodobacter sphaeroides IL106 strain. An artificial fluorophore Alexa Fluor 647 maleimide (A647) was attached to the LH2 bearing cysteine residue at the N-terminal region (LH2-NC) near B800 bacteriochlorophyll a (BChl) assembly. The A647-attached LH2-NC conjugate (LH2-NC-A647) preserved the integrity of the intrinsic chromophores, B800- and B850-BChls, and carotenoids. Femtosecond transient absorption spectroscopy revealed that the sequential energy transfer A647 → B800 → B850 occurs at time scale of 9-10 ps with monoexponential dynamics in micellar and lipid bilayer systems. A B800-removed conjugate (LH2-NC[B800(-)]-A647) exhibited a significant decrease in energy transfer efficiency in the micellar system; however, surprisingly, direct energy transfer from A647 to B850 was observed at a rate comparable to that for LH2-NC-A647. This result implies that the energy transfer pathway is modified after B800 removal. The results obtained suggested that a LH2 complex is a potential platform for construction of biohybrid light-harvesting materials with simple energy transfer dynamics through the site-selective attachment of the external antennae and the modifiable energy-funnelling pathway.

Lipid-Controlled Stabilization of Charge-Separated States (P+QB-) and Photocurrent Generation Activity of a Light-Harvesting-Reaction Center Core Complex (LH1-RC) from Rhodopseudomonas palustris.

The photosynthetic light-harvesting-reaction center core complex (LH1-RC) is a natural excitonic and photovoltaic device embedded in a lipid membrane. In order to apply LH1-RCs as a biohybrid energy-producing material, some important issues must be addressed, including how to make LH1-RCs function as efficiently as possible. In addition, they should be characterized to evaluate how many active LH1-RCs efficiently work in artificial systems. We report here that an anionic phospholipid, phosphatidylglycerol (PG), stabilizes the charge-separated state (a photooxidized electron donor and reduced quinone pair, P+QB-) of LH1-RC (from Rhodopseudomonas palustris) and enhances its activity in photocurrent generation. Steady-state fluorometric analysis demonstrated that PG enhances the formation of the P+QB- state at lower irradiances. The photocurrent generation activity was analyzed via Michaelis-Menten kinetics, revealing that 38% of LH1-RCs reconstituted into the PG membrane generated photocurrent at a turnover frequency of 46 s-1. PG molecules, which interact with LH1-RC in vivo, play the role of an active effector component for LH1-RC to enhance its function in the biohybrid system.

Non-RVD mutations that enhance the dynamics of the TAL repeat array along the superhelical axis improve TALEN genome editing efficacy.

Transcription activator-like effector (TALE) nuclease (TALEN) is widely used as a tool in genome editing. The DNA binding part of TALEN consists of a tandem array of TAL-repeats that form a right-handed superhelix. Each TAL-repeat recognises a specific base by the repeat variable diresidue (RVD) at positions 12 and 13. TALEN comprising the TAL-repeats with periodic mutations to residues at positions 4 and 32 (non-RVD sites) in each repeat (VT-TALE) exhibits increased efficacy in genome editing compared with a counterpart without the mutations (CT-TALE). The molecular basis for the elevated efficacy is unknown. In this report, comparison of the physicochemical properties between CT- and VT-TALEs revealed that VT-TALE has a larger amplitude motion along the superhelical axis (superhelical motion) compared with CT-TALE. The greater superhelical motion in VT-TALE enabled more TAL-repeats to engage in the target sequence recognition compared with CT-TALE. The extended sequence recognition by the TAL-repeats improves site specificity with limiting the spatial distribution of FokI domains to facilitate their dimerization at the desired site. Molecular dynamics simulations revealed that the non-RVD mutations alter inter-repeat hydrogen bonding to amplify the superhelical motion of VT-TALE. The TALEN activity is associated with the inter-repeat hydrogen bonding among the TAL repeats.

Light-Driven Hydrogen Production by Hydrogenases and a Ru-Complex inside a Nanoporous Glass Plate under Aerobic External Conditions.

Hydrogenases are powerful catalysts for light-driven H2 production using a combination of photosensitizers. However, except oxygen-tolerant hydrogenases, they are immediately deactivated under aerobic conditions. We report a light-driven H2 evolution system that works stably even under aerobic conditions. A [NiFe]-hydrogenase from Desulfovibrio vulgaris Miyazaki F was immobilized inside nanoporous glass plates (PGPs) with a pore diameter of 50 nm together with a ruthenium complex and methyl viologen as a photosensitizer and an electron mediator, respectively. After immersion of PGP into the medium containing the catalytic components, an anaerobic environment automatically established inside the nanopores even under aerobic external conditions upon irradiation with solar-simulated light; this system constantly evolved H2 with an efficiency of 3.7 µmol H2 m(-2) s(-1). The PGP system proposed in this work represents a promising first step toward the development of an O2-tolerant solar energy conversion system.

Application of peptide gemini surfactants as novel solubilization surfactants for photosystems I and II of cyanobacteria.

We designed novel peptide gemini surfactants (PG-surfactants), DKDKC12K and DKDKC12D, which can solubilize Photosystem I (PSI) of Thermosynecoccus elongatus and Photosystem II (PSII) of Thermosynecoccus vulcanus in an aqueous buffer solution. To assess the detailed effects of PG-surfactants on the original supramolecular membrane protein complexes and functions of PSI and PSII, we applied the surfactant exchange method to the isolated PSI and PSII. Spectroscopic properties, light-induced electron transfer activity, and dynamic light scattering measurements showed that PSI and PSII could be solubilized not only with retention of the original supramolecular protein complexes and functions but also without forming aggregates. Furthermore, measurement of the lifetime of light-induced charge-separation state in PSI revealed that both surfactants, especially DKDKC12D, displayed slight improvement against thermal denaturation below 60 °C compared with that using ß-DDM. This degree of improvement in thermal resistance still seems low, implying that the peptide moieties did not interact directly with membrane protein surfaces. By conjugating an electron mediator such as methyl viologen (MV(2+)) to DKDKC12K (denoted MV-DKDKC12K), we obtained derivatives that can trap the generated reductive electrons from the light-irradiated PSI. After immobilization onto an indium tin oxide electrode, a cathodic photocurrent from the electrode to the PSI/MV-DKDKC12K conjugate was observed in response to the interval of light irradiation. These findings indicate that the PG-surfactants DKDKC12K and DKDKC12D provide not only a new class of solubilization surfactants but also insights into designing other derivatives that confer new functions on PSI and PSII.

Molecular assembly of zinc chlorophyll derivatives by using recombinant light-harvesting polypeptides with His-tag and immobilization on a gold electrode.

LH1-α and -ß polypeptides, which make up the light-harvesting 1 (LH1) complex of purple photosynthetic bacteria, along with bacteriochlorophylls, have unique binding properties even for various porphyrin analogs. Herein, we used the porphyrin analogs, Zn-Chlorin and the Zn-Chlorin dimer, and examined their binding behaviors to the LH1-α variant, which has a His-tag at the C-terminus (MBP-rubα-YH). Zn-Chlorin and the Zn-Chlorin dimer could bind to MBP-rubα-YH and form a subunit-type assembly, similar to that from the native LH1 complex. These complexes could be immobilized onto Ni-nitrilotriacetic acid-modified Au electrodes, and the cathodic photocurrent was successfully observed by photoirradiation. Since Zn-Chlorins in this complex are too far for direct electron transfer from the electrode, a contribution of polypeptide backbone for efficient electron transfer was implied. These findings not only show interesting properties of LH1-α polypeptides but also suggest a clue to construct artificial photosynthesis systems using these peptide materials.

Electron Conduction and Photocurrent Generation of a Light-Harvesting/Reaction Center Core Complex in Lipid Membrane Environments.

To reveal the structure-function relationship of membrane proteins, a membrane environment is often used to establish a suitable platform for assembly, functioning, and measurements. The control of the orientation of membrane proteins is the main challenge. In this study, the electron conductivity and photocurrent of a light-harvesting/reaction center core complex (LH1-RC) embedded in a lipid membrane were measured using conductive atomic force microscopy (C-AFM) and photoelectrochemical analysis. AFM topographs showed that LH1-RC molecules were well-orientated, with their H-subunits toward the membrane surface. Rectified conductivity was observed in LH1-RC under precise control of the applied force on the probe electrode (<600 pN). LH1-RC embedded in a membrane generated photocurrent upon irradiation when assembled on an electrode. The observed action spectrum was consistent with the absorption spectrum of LH1-RC. The control of the orientation of LH1-RC by lipid membranes provided well-defined conductivity and photocurrent.

Photocurrent and electronic activities of oriented-His-tagged photosynthetic light-harvesting/reaction center core complexes assembled onto a gold electrode.

A polyhistidine (His) tag was fused to the C- or N-terminus of the light-harvesting (LH1)-α chain of the photosynthetic antenna core complex (LH1-RC) from Rhodobacter sphaeroides to allow immobilization of the complex on a solid substrate with defined orientation. His-tagged LH1-RCs were adsorbed onto a gold electrode modified with Ni-NTA. The LH1-RC with the C-terminal His-tag (C-His LH1-RC) on the modified electrode produced a photovoltaic response upon illumination. Electron transfer is unidirectional within the RC and starts when the bacteriochlorophyll a dimer in the RC is activated by light absorbed by LH1. The LH1-RC with the N-terminal His-tag (N-His LH1-RC) produced very little or no photocurrent upon illumination at any wavelength. The conductivity of the His-tagged LH1-RC was measured with point-contact current imaging atomic force microscopy, indicating that 60% of the C-His LH1-RC are correctly oriented (N-His 63%). The oriented C-His LH1-RC or N-His LH1-RC showed semiconductive behavior, that is, had the opposite orientation. These results indicate that the His-tag successfully controlled the orientation of the RC on the solid substrate, and that the RC produced photocurrent depending upon the orientation on the electrode.

Overexpression of Rhodobacter sphaeroides PufX-bearing maltose-binding protein and its effect on the stability of reconstituted light-harvesting core antenna complex.

The PufX protein, encoded by the pufX gene of Rhodobacter sphaeroides, plays a key role in the organization and function of the core antenna (LH1)-reaction centre (RC) complex, which collects photons and triggers primary photochemical reactions. We synthesized a PufX/maltose-binding protein (MBP) fusion protein to study the effect of the PufX protein on the reconstitution of B820 subunit-type and LH1-type complexes. The fusion protein was synthesized using an Escherichia coli expression system and purified by affinity chromatography. Reconstitution experiments demonstrated that the MBP-PufX protein destabilizes the subunit-type complex (20°C), consistent with previous reports. Interestingly, however, the preformed LH1-type complex was stable in the presence of MBP-PufX. The MBP-PufX protein did not influence the preformed LH1-type complexes (4°C). The LH1-type complex containing MBP-PufX showed a unique temperature-dependent structural transformation that was irreversible. The predominant form of the complex at 4°C was the LH1-type. When shifted to 20°C, subunit-type complexes became predominant. Upon subsequent cooling back to 4°C, instead of re-forming the LH1-type complexes, the predominant form remained the subunit-type complexes. In contrast, reversible transformation of LH1 (4°C) and subunit-type complexes (20°C) occurs in the absence of PufX. These results are consistent with the suggestion that MBP-PufX interacts with the LH1α- polypeptide in the subunit (α/ß)-type complex (at 20°C), preventing oligomerization of the subunit to form LH1-type complexes.

Two-Dimensional Molecular Assembly of Bacteriochlorophyll a Derivatives Using Synthetic Poly(ethylene glycol)-Linked Light-Harvesting Model Polypeptides on a Gold Electrode Modified with Supported Lipid Bilayers.

The two-dimensional molecular assembly was accomplished of bacteriochlorophyll a (BChl a) and zinc-substituted BChl a (Zn-BChl a) together with synthetic poly(ethylene glycol)(PEG)-linked light-harvesting (LH) model polypeptides on a gold Au(111) electrode modified with supported lipid bilayers. Model polypeptides for LH1-α from Rhodospirillum (Rs.) rubrum were successfully synthesized and stably assembled with Zn-BChl a in 1,2-dioleoyl-sn-glycero-3-[phospho-rac-(1'-glycerol)] (DOPG) lipid bilayers on an electrode at room temperature, as well as in liposomal solution, in which the Zn-BChl a complex unlike BChl a, was stably assembled. The PEG moiety of the model polypeptide assisted the stable assembly with an α-helical conformation of the LH1-α model peptides together with these pigments onto the gold electrode with defined orientation. The photocurrent response depended on the combinations of the pigments and synthetic LH model polypeptides. The results presented herein will be useful for the self-assembly of these complexes on electrodes to construct efficient energy-transfer and electron-transfer reactions between individual pigments in lipid bilayers.

Immobilization and Photocurrent Activity of a Light-Harvesting Antenna Complex II, LHCII, Isolated from a Plant on Electrodes.

A light-harvesting (LH) antenna complex II, LHCII, isolated from spinach was immobilized onto an indium tin oxide (ITO) electrode with dot patterning of 3-aminopropyltriethoxysilane (APS) by utilizing electrostatic interactions between the cationic surface of the electrode and the anionic surface of stromal side of the LHCII polypeptide. Interestingly, the illumination of LHCII assembled onto the ITO electrode produced a photocurrent response that depends on the wavelength of the excitation light. Further, LHCII was immobilized onto a TiO2 nanostructured film to extend for the development of a dye-sensitized biosolar cell system. The photocurrent measured in the iodide/tri-iodide redox system of an ionic liquid based electrolyte on the TiO2 system showed remarkable enhancement of the conversion efficiency, as compared to that on the ITO electrode.

Selective assembly of photosynthetic antenna proteins into a domain-structured lipid bilayer for the construction of artificial photosynthetic antenna systems: structural analysis of the assembly using surface plasmon resonance and atomic force microscopy.

Two types of photosynthetic membrane proteins, the peripheral antenna complex (LH2) and the core antenna/reaction center complex (LH1-RC), play an essential role in the primary process of purple bacterial photosynthesis, that is, capturing light energy, transferring it to the RC where it is used in subsequent charge separation. Establishment of experimental platforms is required to understand the function of the supramolecular assembly of LH2 and LH1-RC molecules into arrays. In this study, we assembled LH2 and LH1-RC arrays into domain-structured planar lipid bilayers placed on a coverglass using stepwise combinations of vesicle-to-planar membrane formation and vesicle fusion methods. First, it was shown that assembly of LH2 and LH1-RC in planar lipid bilayers, through vesicle-to-planar membrane formation, could be confirmed by absorption spectroscopy and high resolution atomic force microscopy (AFM). Second, formation of a planar membrane incorporating LH2 molecules made by the vesicle fusion method was corroborated by AFM together with quantitative analysis by surface plasmon resonance (SPR). By combining planar membrane formation and vesicle fusion, in a stepwise manner, LH2 and LH1-RC were successfully organized in the domain-structured planar lipid membrane. This methodology for construction of LH2/LH1-RC assemblies will be a useful experimental platform with which to investigate energy transfer from LH2 to LH1-RC where the relative arrangement of these two complexes can be controlled.

Immobilization of porphyrin derivatives with a defined distance and orientation onto a gold electrode using synthetic light-harvesting α-helix hydrophobic polypeptides.

Molecular assembly of Zn-porphyrin pigments on a gold electrode using synthetic 1α-helix hydrophobic polypeptides which have similar amino acid sequences to the hydrophobic core in the native photosynthetic light-harvesting (LH) 1-ß polypeptide from Rhodobacter sphaeroides has been achieved. This method is clearly successful in allowing assembly of porphyrins together with LH1 type functional complexes with a defined distance and orientation on the electrode. In this case, the photocurrent direction and the distance of electron transfer of pigments could be controlled by these synthetic LH1 model polypeptides. This method will be useful for the self-assembly of these pigment and protein complexes in order to study the energy transfer and electron transfer reactions between individual pigments in the supramolecular complexes on the electrode, as well as to provide insight into the effect of the distance and orientation of pigments and the effect of the structure of 1α-helix hydrophobic polypeptide on the energy transfer and electron transfer reactions.

Peroxide decoloration of CI Acid Orange 7 catalyzed by manganese chlorophyll derivatives at the surfaces of micelles and lipid bilayers.

Manganese-substituted chlorophyll a derivatives (MnChls) were synthesized. We first report peroxidative oxidation of an azo dye, CI Acid Orange 7, catalyzed by MnChls at the surfaces of micelles and lipid bilayers with hydrogen peroxide (H(2)O(2)) under mild conditions (pH 8.0, 25 degrees C). Peroxide decoloration depended upon the structures of MnChls, surfactants, lipids, and the presence of imidazole. Surprisingly, a largest decoloration rate was observed for MnChls dimer, MnPChlide a-K(MnPChlide a)-His 5 in cetyltrimethylammonium bromide (CTAB) micellar solution, especially when imidazole was present: this observation is analogous to the decoloration using horseradish peroxidase (HRP). Interestingly, the dimer complexes showed enhanced decoloration in comparison to the corresponding MnChls monomer in the micellar solution. In contrast, the MnChls monomer showed enhanced decoloration in comparison with the MnChls dimer in liposomal suspensions. Further, the imidazole residue covalently linked to the MnChls plays an important role in increasing the decoloration in both micellar and liposomal suspensions as well as in addition of imidazole into the solutions. It is interesting that the electron paramagnetic resonance (EPR) spectra of MnPChlide a ME 2, MnPChlide a-His 3, and MnMPMME-His 7 have 16 peaks around g = 2 in Egg PC or DMPC liposomal suspension with H(2)O(2), which is typical of a mixed-valence Mn(III)-Mn(IV) complex with coupling between two ions. The higher decoloration performance obtained by the monomer porphyrin compounds at the surface of the lipid bilayers appears to be related to the stability of this mixed-valence Mn(III)-Mn(IV) species formed in the lipid bilayers. This finding should provide useful information to note that MnChls, which are easily found in a number of biological systems, are involved in functions such as hydrogen peroxide decomposition in bacteria and the oxidation of water during photosynthesis as well as the peroxidases function such as the peroxidative decoloration as bleaching agents.

A fine line between molecular umbrella transport and ionophoric activity.

A persulfated molecular umbrella derived from one spermine, four lysine, and eight deoxycholic acid molecules was found to exhibit ionophoric activity, as shown by pH discharge and Na(+) and Cl(-) transport experiments. In sharp contrast, a moderately more hydrophilic analogue derived from cholic acid showed no such ionophoric activity. Both molecular umbrellas crossed liposomal membranes by passive transport with experimental rates that were similar. These findings show how the interactions between such amphomorphic molecules and phospholipid bilayers are a sensitive function of the umbrella's hydrophilic/lipophilic balance (HLB). They also raise the possibility of exploiting molecular umbrellas in fundamentally new ways.

Viewing membrane-bound molecular umbrellas by parallax analyses.

Fluorescence quenching measurements have been made for a series of di-walled and tetra-walled molecular umbrellas having moderate (i.e., hydroxyl-) and strong (i.e., sulfate-) facial hydrophilicity, using Cascade Blue as the fluorophore. Through the use of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphotempocholine, 1-palmitoyl-2-stearoyl-(5-DOXYL)-sn-glycero-3-phosphocholine, and 1-palmitoyl-2-stearoyl-(12-DOXYL)-sn-glycero-3-phosphocholine as fluorescence quenchers, evidence has been obtained for a membrane-bound state in which the umbrella molecules lie on the surface of the lipid bilayer. In the case of the sulfated molecular umbrellas, evidence has also been obtained for a subpopulation in which the fluorophore lies deeper within the membrane. Probable structures for the shallow-lying and deep-lying molecular umbrellas are discussed.