Effect of pre-drying and post-frying holding treatments on the oil absorption and quality of fried batter-coated peanuts.

In this study, the effect of pre-drying and post-frying holding treatments on the oil absorption and the quality of the fried batter-coated peanuts were explored. The results showed that hot air drying and microwave drying induced the gelatinization of starch in the batter before frying. The thermodynamic properties of starch in the batter after frying indicated that pre-drying could protect the orderliness of the starch. CLSM images showed that the pre-drying treatment reduced the number of large oil spots on the surface of batter of fried batter-coated peanuts. SEM observation revealed that the structure of the batter treated with pre-drying was denser and the number of large pores was reduced after frying. The post-frying holding treatment improved the color and texture of the batter-coated peanuts. In conclusion, the pre-drying and post-frying holding treatment can reduce the oil content and improve the fracturability of the fried batter-coated peanuts.

The addition of resistant starch and protein to the batter reduces oil uptake and improves the quality of the fried batter-coated nuts.

The batter compositions can affect the oil uptake and texture of fried batter-coated nuts. In this study, the oil uptake and quality of fried batter-coated peanuts and sunflower seeds added with resistant starch and protein were investigated. The results demonstrated that the addition of resistant starch increased the batter hardness and fracturability of the fried batter-coated peanuts by 34.36 % and 33.73 %, respectively. The oil content of fried batter-coated peanuts and sunflower seeds were decreased by 17.98 % and 15.69 %, respectively, with the addition of protein. The microstructure and roughness of the batter revealed that the batter added with protein became denser and uniform. Furthermore, the protein in the batter added with 6 % soy protein isolate had a high surface hydrophobicity. In summary, the addition of resistant starch and protein in batter will be a promising strategy for reducing the oil content and improving the quality of fried batter-coated nuts.

Chitosan-Delivered Chlorantraniliprole for Pest Control: Preparation Optimization, Deposition Behavior, and Application Potential.

Chitosan has emerged as a promising biopolymer carrier for the sustained release of pesticides owing to its good biocompatibility, biodegradability, and bioactivity. In this work, a controlled-release formulation of insecticide chlorantraniliprole was fabricated through coprecipitation-based synchronous encapsulation with chitosan, where the optimum preparation conditions, storage stability, deposition behavior, and application potential were investigated. Preparation of optimization data from response surface methodology showed high correlation coefficient (R2) of 0.9875 and adjusted coefficient (Radj2) of 0.9715. The resulting formulation displayed good loading content of 28.39%, high encapsulation efficiency of 75.71%, and good storage stability. Compared with the commercial suspension concentrate, the formulation exhibited better wettability and retention behaviors on plant leaves. Excitingly, effective control against one species of mealybug genus Paraputo Laing (outside the killing spectrum) on the Hippeastrum reticulatum plant was successfully achieved by spraying the controlled-release formulation at different time intervals. This work indicates the good potential of the developed formulation in expanding the application scope of chlorantraniliprole, which shows a new strategy for sustainable pest management.

Coprecipitation-based synchronous chlorantraniliprole encapsulation with chitosan: carrier-pesticide interactions and release behavior.

BACKGROUND: Controlled-release pesticide formulations have emerged as a promising approach towards sustainable pest control. Herein, an environment-friendly formulation of insecticide chlorantraniliprole (CAP) was fabricated through a simple approach of coprecipitation-based synchronous encapsulation by chitosan (CTS), with carrier-pesticide interaction mechanism and release behavior investigated. RESULTS: The resulting CAP/CTS controlled-release formulation (CCF) showed a good loading content of 28.1% and a high encapsulation efficiency of 75.6%. Instrument determination in combination with molecular dynamics (MD) simulations displayed that the primary interactions between CAP and CTS were physical adsorption and complicated hydrogen (H)-bonds, which formed dominantly between NH in amides [or nitrogen (N) in ring structures] of CAP and hydroxyl (or amino) groups of CTS, as well as oxygen (O) in CAP with hydrogen in CTS or H2 O molecules. The in vitro release tests exhibited obvious pH/temperature sensitivity, with release dynamics following the first-order or Ritger-Peppas model. As the temperature increased, the CAP release process of the Ritger-Peppas model changed from Case-II to anomalous transport, and ultimately to a Fickian diffusion mechanism. The control effect against Plutella xylostella larvae also was evaluated by toxicity tests, where comparable efficacy of CCF to the commercial suspension concentrate was obtained. CONCLUSION: The innovative, easy-to-prepare CCF can be used as a formulation with obvious pH/temperature sensitivity and good efficacy on target pests. This work contributes to the development of efficient and safe pesticide delivery systems, especially using the natural polymer materials as carriers. © 2023 Society of Chemical Industry.

Evaluation of a Spinosad Controlled-Release Formulation Based on Chitosan Carrier: Insecticidal Activity against Plutella xylostella (L.) Larvae and Dissipation Behavior in Soil.

Controlled-release pesticide formulations using natural polymers as carriers are highly desirable owing to their good biocompatibility, biodegradability, and improved pesticide utilization. In this study, the application potential of our previously prepared spinosad/chitosan controlled-release suspension (SCCS) was evaluated through both toxicity and dissipation tests. A comparison with the spinosad suspension concentrate and the commercial spinosad emulsion in water showed that the insecticidal activity of SCCS against Plutella xylostella larvae displayed the best quick-acting performance as well as long-term efficacy of more than 20 days. The 48 h LC50 for a 20-day efficacy was calculated to be 29.36 mg/L. The dissipation behavior of spinosad in the spinosad/chitosan microparticles in soil was found to follow the first-order kinetics, with a relatively shorter half-life (2.1 days) than that observed for the unformulated spinosad (3.1 days). This work showed the positive effect of chitosan on spinosad in improving insecticidal activity and reducing environmental risks in soil, which provided useful information on the application potential of pesticide-carrier systems based on natural polymer materials in crop protection and food safety.

Multiple Roles of Mesoporous Silica in Safe Pesticide Application by Nanotechnology: A Review.

Pollution related to pesticides has become a global problem due to their low utilization and non-targeting application, and nanotechnology has shown great potential in promoting sustainable agriculture. Nowadays, mesoporous silica-based nanomaterials have garnered immense attention for improving the efficacy and safety of pesticides due to their distinctive advantages of low toxicity, high thermal and chemical stability, and particularly size tunability and versatile functionality. Based on the introduction of the structure and synthesis of different types of mesoporous silica nanoparticles (MSNs), the multiple roles of mesoporous silica in safe pesticide application using nanotechnology are discussed in this Review: (i) as nanocarrier for sustained/controlled delivery of pesticides, (ii) as adsorbent for enrichment or removal of pesticides in aqueous media, (iii) as support of catalysts for degradation of pesticide contaminants, and (iv) as support of sensors for detection of pesticides. Several scientific issues, strategies, and mechanisms regarding the application of MSNs in the pesticide field are presented, with their future directions discussed in terms of their environmental risk assessment, in-depth mechanism exploration, and cost-benefit consideration for their continuous development. This Review will provide critical information to related researchers and may open up their minds to develop new advances in pesticide application.

Coprecipitation-based synchronous pesticide encapsulation with chitosan for controlled spinosad release.

Controlled release pesticide formulation with long-term efficacy is highly desirable for improving pesticide utilization and reducing adverse effects. In this study, an environment-friendly controlled release formulation of biological insecticide spinosad was fabricated through the coprecipitation-based synchronous encapsulation with chitosan. The resulted spinosad/chitosan formulation showed an excellent encapsulation efficiency of 60 %, obvious pH and temperature sensitivity, and outstanding ultraviolet shielding ability. The in vitro release tests displayed long sustained-release time (>18 d) and high cumulative release (>80 %) under neutral and weakly alkaline conditions. The primary interaction between spinosad and chitosan has been found to be physical adsorption and adhesion, with the release dynamics following Fickian diffusion mechanism of Ritger-Peppas model. This work contributes to the development of pesticide carrier system of natural polymer materials, with a great potential for insect pest control.

Enhanced butanol production in a microbial electrolysis cell by Clostridium beijerinckii IB4.

Reducing power such as NADH is an essential factor for acetone/butanol/ethanol (ABE) fermentation using Clostridium spp. The objective of this study was to increase available NADH in Clostridium beijerinckii IB4 by a microbial electrolysis cell (MEC) with an electron carrier to enhance butanol production. First of all, a MEC was performed without electron carrier to study the function of cathodic potential applying. Then, various electron carriers were tested, and neutral red (NR)-amended cultures showed an increase of butanol concentration. Optimal NR concentration (0.1 mM) was used to add in a MEC. Electricity stimulated the cell growth obviously and dramatically diminished the fermentation time from 40 to 28 h. NR and electrically reduced NR improved the final butanol concentration and inhibited the acetone generation. In the MEC with NR, the butanol concentration, yield, proportion and productivity were increased by 12.2, 17.4, 7.2 and 60.3 %, respectively. To further understand the mechanisms of NR, cathodic potential applying and electrically reduced NR, NADH and NAD(+) levels, ATP levels and hydrogen production were determined. NR and electrically reduced NR also improved ATP levels and the ratio of NADH/NAD(+), whereas they decreased hydrogen production. Thus, the MEC is an efficient method for enhancing the butanol production.

Butanol production from acid hydrolyzed corn fiber with Clostridium beijerinckii mutant.

Sulfuric acid treated corn fiber hydrolysate (SACFH) inhibited cell growth and the production of butanol (4.7±0.2 g/L) by Clostridium beijerinckii IB4 in P2 medium. Optimal medium components were determined using fractional factorial design. NH4HCO3, FeSO4·7H2O and CaCO3 were demonstrated to be significant components in the production of butanol. The Box-Behnken design and a corresponding quadratic model were used to predict medium components (NH4HCO3 1.96 g/L, FeSO4·7H2O 0.26 g/L and CaCO3 3.15 g/L) and butanol yield (9.5 g/L). The confirmation experiment, under the predicted optimal conditions, yielded a butanol level of 9.5±0.1g/L. This study indicates that the Box-Behnken design is an effective approach for screening the optimal medium components required for the production of butanol. It also demonstrates that SACFH, which has high levels of inhibitors such as furan and phenolic compounds, may be used as a renewable carbon source in the production of biofuels.

[Effect of HBsAg pulsed dendritic cells on the functions of cytokine-induced killer cells].

AIM: To explore the effects of HBsAg-pulsed dendritic cells (DCs) on the proliferation and killing functions of cytokine-induced killer (CIK) cells. METHODS: The peripheral blood mononuclear cells (PBMCs) were isolated from the patients with chronic hepatitis B by the routine method, and induced into specific DCs with HBsAg pulsed. The (3)H-TdR incorporation method was used to determine the stimulation effect of HBsAg-pulsed DCs on the proliferation of CIK cells. LDH release assay was used to measure the specific killing activity of CIK cells on HepG2215 cells. RESULTS: The HBsAg-pulsed DCs could induce the memory proliferation of CIK cells and strengthen the killing activity of CIK cells (P<0.05). CONCLUSION: HBsAg-pulsed DCs can enhance the proliferation and killing functions of CIK cells.

[The cloning of human augmentor of liver regeneration-interacting proteins].

AIM: To screen human augmentor of liver regeneration(hALR)-interacting proteins and to explore the mechanisms of hALR in liver regeneration. METHODS: The open reading frame of hALR was used to construct the "bait" plasmid and the genes encoding hALR-interacting proteins were screened from the human liver cDNA library that was pretransformed into yeast Y187 by yeast two-hybrid system. Bioinformatic analysis of the sequences of the positive clones were performed. RESULTS: The positive clones encoding metallothionein, albumin, selenoprotein P,Na/K-ATPase, and 2 unknown proteins were screened out. CONCLUSION: The successful cloning of the genes encoding proteins interacting with hALR may pave the way for studying the interaction between the above proteins and hALR, and the molecular mechanisms of biological effect of hALR.

[Modification of recombinant human augmenter of liver regeneration with urea studied by maldi-tof mass spectrometry].

To investigate the modification of recombinant human augmenter of liver regeneration (rhALR) by the urea in purification processes and the biological activity of rhALR and modified rhALR, the molecular weight of proteins and tryptic peptides were determined by matrix-assisted laser desorption time of flight mass spectrometry (MALDI-TOF-MS), and the biological activity of rhALR and modified rhALR was also observed by in vivo experiments. A 30 kD homodimer of rhALR was purified under denaturing conditions. The molecular weight of rhALR is 30 780 if urea was used to denature the inclusion bodies; when the denaturant was guanidine hydrochloride, the molecular weight of rhALR was 30 087. The results of MALDI-TOF-MS of digested rhALR that have been modified by urea showed that peptides that contained lysyl were 43 larger than the theoretical value. Proteins purified by different processes were all able to promote the survival rate of CCl(4)-intoxicated mice. It could be concluded that cyanate, the cleavage product of urea, could react with the epsilon-amino group of lysyl in rhALR, and the modified rhALR had the same biological activity as natural rhALR.