One-step orbit reconstruction using PMMA implants following hyperostotic sphenoid wing meningioma removal: Evolution of the technique in short clinical series.

Purpose: To report our experience with patient specific implants for one-step orbit reconstruction following hyperostotic SWM removal and to describe the evolution of the technique through three surgical cases. Methods: Three cases of one-step SWM removal and orbit reconstruction are described. All cases are given consecutively to describe the evolution of the technique. Hyperostotic bone resection was facilitated by electromagnetic navigation and cutting guides (templates). Based on a 3D model, silicone molds were made using CAD/CAM. Then PMMA implant was fabricated from these molds. The implant was adjusted and fixed to the cranium with titanium screws after tumor removal. Results: Following steps of the procedure changed over these series: hyperostotic bone resection, implant thickness control, implant overlay features, anatomic adjustments, implant fixation. The proptosis resolved in all cases. In one patient the progressive visual acuity deterioration was recognized during the follow-up. No oculomotor disturbances and no tumor regrowth were found at the follow-up. Conclusion: CAD/CAM technologies enable creation of implants of any size and configuration, and thereby, to increase the extent of bony resection and lower the risk of tumor progression. The procedure is performed in one step which decreases the risk of postoperative morbidity.

Stability and Thrombogenicity Analysis of Collagen/Carbon Nanotube Nanocomposite Coatings Using a Reversible Microfluidic Device.

Currently, the development of stable and antithrombogenic coatings for cardiovascular implants is socially important. This is especially important for coatings exposed to high shear stress from flowing blood, such as those on ventricular assist devices. A method of layer-by-layer formation of nanocomposite coatings based on multi-walled carbon nanotubes (MWCNT) in a collagen matrix is proposed. A reversible microfluidic device with a wide range of flow shear stresses has been developed for hemodynamic experiments. The dependence of the resistance on the presence of a cross-linking agent for collagen chains in the composition of the coating was demonstrated. Optical profilometry determined that collagen/c-MWCNT and collagen/c-MWCNT/glutaraldehyde coatings obtained sufficiently high resistance to high shear stress flow. However, the collagen/c-MWCNT/glutaraldehyde coating was almost twice as resistant to a phosphate-buffered solution flow. A reversible microfluidic device made it possible to assess the level of thrombogenicity of the coatings by the level of blood albumin protein adhesion to the coatings. Raman spectroscopy demonstrated that the adhesion of albumin to collagen/c-MWCNT and collagen/c-MWCNT/glutaraldehyde coatings is 1.7 and 1.4 times lower than the adhesion of protein to a titanium surface, widely used for ventricular assist devices. Scanning electron microscopy and energy dispersive spectroscopy determined that blood protein was least detected on the collagen/c-MWCNT coating, which contained no cross-linking agent, including in comparison with the titanium surface. Thus, a reversible microfluidic device is suitable for preliminary testing of the resistance and thrombogenicity of various coatings and membranes, and nanocomposite coatings based on collagen and c-MWCNT are suitable candidates for the development of cardiovascular devices.

Surgical Treatment of Large and Giant Anterior Cerebral Artery Aneurysms in the Endovascular Era: Analysis of Large Clinical Series.

OBJECTIVE: Analysis of results of surgical treatment of 112 patients with large and giant anterior cerebral artery (ACA) aneurysms. METHODS: This is the largest clinical series of large and giant ACA aneurysms ever reported. Retrospective analysis of medical charts, radiographic studies, and intraoperative videos was performed. Univariate and multivariate analysis of relations among 3 types of outcomes (complete aneurysm occlusion, ischemic complications, and clinical outcomes) and predicting factors was performed. RESULTS: Most aneurysms were communicant (84.8%). Aneurysms of the A1 segment and distal segments (A2-A5) were encountered rarely. Complete aneurysm occlusion (class I) was shown in 95 cases (90.5%). In 4 patients, only exploration and wrapping were performed because of severe atherosclerosis and chronic intraluminal thrombi. Partial occlusion (class III) was shown in 2 patients, and neck residual (class II) in 4 patients. Cerebral ischemia developed in 29 patients postoperatively. Occlusion or injury of the A1 segment and anterior communicating artery perforators and recurrent branch of Heubner were the most common reason for ischemic complications. At follow-up, 97 patients (86.6%) had favorable outcomes. Ten patients (8.9%) had unfavorable outcomes because of postoperative complications. CONCLUSIONS: Microsurgery provides effective and relatively safe occlusion of complex ACA aneurysms. Direct clipping can be applied in most cases independent of their precise location. In certain cases, alternative methods can be safely used. According to multivariate analysis, giant aneurysm size, aneurysm-related mass effect, involvement of large arterial branches in the aneurysm wall, and intraoperative complications were significant predicting factors for ischemic complications.

Analysis of a Novel Entry Point for Freehand Ventriculostomy Using Computerized Tomography Scans.

Background External ventricular drain (EVD) placement is one of the most common procedures in neurosurgery. Neurosurgeons generally prefer to access the ventricles via Kocher's point since it is the most common point of entry to this area; however, this point is used to describe different anatomic landmarks and is not well-defined. Objective The present study aims to describe and provide an anatomical assessment of a novel ventriculostomy access point developed by the authors using computerized tomography (CT) scans performed on 100 patients. Materials and methods Data were collected from 100 randomly selected patients with normal ventricular anatomy found on their 1.0 mm-slice CT scans performed at the Burdenko Neurosurgical Center from March 2019 to June 2021. The CT inclusion criteria were: CT slices < or = to 1 mm and absence of brain herniation. Patients with brain mass lesions, severe brain edema, and pneumocephalus were excluded. Age, gender, and ventricular size were not exclusion criteria. Results The mean patient age was 43.58 years (range 4-73), with 50 men and 50 women. The mean Evan's index was 25.7 % (SD=4.38 %, range 10.2-41.0 %). No differences were found between the angles of EVD placement on either side (89.50±1.22 degrees on the right and 89.60±1.14 degrees on the left). Hence, nearly all EVD cases had been placed perpendicularly to the skull surface at a pinpoint location. Conclusion The proposed point of successful ventriculostomy placement in this study was 3 cm from the bregma along the coronal suture. The angle of EVD placement was approximately 90 degrees in almost all patients and was independent of the patient's age and the side of the head that was entered. Little correlation was found between the value of the entry angle and Evan's index. The point is simply identifiable, and its entry is easily accessible in practice.