Characterization of three plastic forms: Plasticoncrete, plastimetal and plastisessiles.

Plastic forms, including plastiglomerate, pyroplastic, plasticrusts, anthropoquinas, plastistone and plastitar, were recorded worldwide. These plastic forms derive from geochemical or geophysical interactions such as heat-induced plastic fusion with rock in campfires, incomplete plastic combustion, water motion-driven plastic abrasion in the rocky intertidal zone, plastic deposition in hardened sediments and plastic bonding with tar. Thereby, these interactions can profoundly influence the fate of plastics in the environment. This study characterized three novel plastic forms (plasticoncrete, plastimetal and plastisessiles) discovered on Helgoland island (North Sea). Plasticoncrete consisted of common polyethylene (PE) and polypropylene (PP) fibers hardened in concrete. Plastimetal included PE fibers rusted with metal. Plastisessiles consisted of PE fibers attached to benthic substrates by sessile invertebrates (oysters and polychaetes). Plasticoncrete and plastimetal are the first plastic forms composed of two man-made materials. Plastisessiles show that plastic forms not only result from human- or environment-mediated interactions but also from biological interactions between invertebrates and plastic. All plastic forms (bulk density ≥ 1.4 g/cm3) sunk during floating tests and hardly changed their positions during a 13-day field experiment and 153- to 306-day field monitorings, indicating their local formation, limited mobility and longevity. Still, experimentally detached plastic fibers floated, confirming that the formation of these plastic forms influences the fate of plastic fibers in the environment. Furthermore, the experiment showed that plasticoncrete got deposited in beach sand under wavy and windy conditions, indicating that coastal waves and onshore winds drive plasticoncrete deposition in coastal sediments. We also provide first records of plasticoncrete on Mallorca island (Mediterranean Sea) and plastimetal on Hikoshima island (Sea of Japan), respectively, which show that these plastic forms are no local phenomena. Thereby, our study contributes to the growing fundamental knowledge of plastic forms that is essential to understand the role and fate of these pollutants in coastal habitats worldwide.

Microplastic load and polymer type composition in European rocky intertidal snails: Consistency across locations, wave exposure and years.

Microplastics (<5 mm) are emerging pollutants in oceans worldwide. As such small particles are easily ingested, microplastics are found in numerous pelagic and benthic organisms. However, information on microplastics in rocky intertidal organisms and habitats is relatively scant. Therefore, we examined snails and water samples from wave-sheltered and wave-exposed rocky intertidal habitats in Helgoland (North Sea), Cap Ferrat and Giglio (Mediterranean) and Madeira (Atlantic Ocean) in 2019-2020 for microplastics. Furthermore, we examined snails from the same habitats in Helgoland, Cap Ferrat and Giglio in 2007-2009. In total, we performed 362 individual micro-Fourier-transform infrared spectroscopy (µFTIR) measurements on the snails and water samples. While the snails contained 50 microplastics (composed of nine polymer types), the water samples contained 24 microplastics (comprising six polymer types). Microplastic load and polymer type composition in the snails were rather similar across locations, wave exposure and years. Also, microplastic load and polymer composition in the water samples were similar across locations and wave exposure. Moreover, snail and water microplastic loads were significantly correlated which indicates that snails are useful bioindicators for microplastic loads in rocky intertidal habitats. Interestingly, the majority of the microplastics consisted of paint chips that likely derived from ships. Overall, our study provides the first comprehensive microplastic record in rocky intertidal organisms across locations, wave exposure and years that can serve as a baseline to examine historic and future microplastic dynamics in rocky intertidal systems.

Freshwater insects of different feeding guilds ingest microplastics in two Gulf of Guinea tributaries in Nigeria.

Plastic pollution has enormous impacts on freshwater and marine ecosystem health, and it is one of the topmost environmental concerns of the current geological period (i.e. the Anthropocene). Thus, the goal of our study was to provide baseline information and bridge the information gap on the occurrence of microplastics (MPs) in African freshwater systems, using two tributaries of the Gulf of Guinea (Ogun and Osun Rivers) in Nigeria as a case study and three freshwater insect species of different feeding guilds as bioindicators. A total of 29 individuals of the insect species were chemically digested and subsequently analysed for MP presence under a digital microscope and a micro-Fourier-transform infrared (µFTIR) spectroscope. Collector-gatherers (Chironomus sp. and Siphlonurus sp.) recorded the highest MP load per gram wet weight, while the predatory Lestes viridis recorded the lowest. The highest diversity of polymers was recorded in Chironomus sp. of Ogun River, i.e. styrene ethylene butylene styrene, acrylonitrile butadiene styrene (ABS), chlorinated polyethylene, polypropylene (PP), and polyester, while two polymers each were recorded in Siphlonurus sp. (i.e. polyester and ABS) and L. viridis (i.e. polyester and PP) of Osun River. We conclude that collector-gatherers like Chironomus sp. and Siphlonurus sp. could be best employed as MP bioindicators in freshwater systems. However, their suitability as MP bioindicators should be further investigated in different freshwater ecosystems worldwide. Graphical abstract.

PVC and PET microplastics in caddisfly (Lepidostoma basale) cases reduce case stability.

Caddisfly larvae occur in streams and rivers, and many caddisfly species build protective cases using material from their habitat such as sand grains. At the same time, microplastics (MPs) are regularly deposited in aquatic sediments and are incorporated into caddisfly (Lepidostoma basale) cases in the field. However, it is unknown what the effects of MP incorporation into cases might be on the health of the caddisfly larvae. Hence, we offered two commonly used MPs (polyvinyl chloride (PVC) and polyethylene terephthalate (PET)) to L. basale larvae during a laboratory experiment. Both plastic types have a high density and co-occur with L. basale larvae in benthic habitats. In our experiment, L. basale actively used sand, PET and PVC MPs for building tube-like portable or emergency cases. The latter is a temporary shelter under which the larva can hide for immediate protection. Furthermore, case stability decreased with increasing PVC and PET particle content in the cases, suggesting that MPs may threaten caddisflies by destabilising cases. When case stability is reduced, the protective function of the cases is limited and the larvae may be more prone to predation. Additionally, larvae may be washed away by the current as plastic is lighter than sand. Both effects could limit the caddisfly's survival, which could have far-reaching consequences as caddisfly larvae are important primary consumers in aquatic ecosystems. Graphical abstract.

Correction to: Quantitative analysis of PET microplastics in environmental model samples using quantitative 1H-NMR spectroscopy: validation of an optimized and consistent sample clean-up method.

The original version of this article contained a mistake.

Quantitative analysis of PET microplastics in environmental model samples using quantitative 1H-NMR spectroscopy: validation of an optimized and consistent sample clean-up method.

Identification and quantification of microplastics (MP) in environmental samples is crucial for understanding the risk and distribution of MP in the environment. Currently, quantification of MP particles in environmental samples and the comparability of different matrices is a major research topic. Research also focusses on sample preparation, since environmental samples must be free of inorganic and organic matrix components for the MP analysis. Therefore, we would like to propose a new method that allows the comparison of the results of MP analysis from different environmental matrices and gives a MP concentration in mass of MP particles per gram of environmental sample. This is possible by developing and validating an optimized and consistent sample preparation scheme for quantitative analysis of MP particles in environmental model samples in conjunction with quantitative 1H-NMR spectroscopy (qNMR). We evaluated for the first time the effects of different environmental matrices on identification and quantification of polyethylene terephthalate (PET) fibers using the qNMR method. Furthermore, high recovery rates were obtained from spiked environmental model samples (without matrix ~ 90%, sediment ~ 97%, freshwater ~ 94%, aquatic biofilm ~ 95%, and invertebrate matrix ~ 72%), demonstrating the high analytical potential of the method. Graphical abstract.

Metabolic activity and behavior of the invasive amphipod Dikerogammarus villosus and two common Central European gammarid species (Gammarus fossarum, Gammarus roeselii): Low metabolic rates may favor the invader.

The Ponto-Caspian amphipod Dikerogammarus villosus is one of the most successful invaders in Central European rivers. Contrary to studies on its ecology, ecophysiological studies comparing the species' physiological traits are scarce. In this context, in particular the metabolic activity of the invasive species has rarely been considered and, moreover, the few existing studies on this species report strongly deviating results. The purpose of this study was to assess the metabolic activity and behavior of D. villosus and other common European amphipod species (Gammarus fossarum, Gammarus roeselii) in relation to temperatures covering the thermal regime of the invaded habitats. Based on direct calorimetric measurements of metabolic heat dissipation at three temperature levels (5°C, 15°C and 25°C), we found the routine metabolic rate of D. villosus to be significantly lower than that of the other studied gammarid species at the medium temperature level. The estimated resting metabolic rate indicated a similar trend. At 5°C and 25°C, both routine and resting metabolic rate did not differ between species. Compared to G. fossarum and G. roeselii, D. villosus exhibited lower locomotor activity at the low and medium temperatures (5°C and 15°C). In contrast, its locomotor activity increased at the high experimental temperature (25°C). G. fossarum and G. roeselii were apparently more active than D. villosus at all studied temperatures. We conclude that D. villosus has both physiological and behavioral adaptations that lead to a reduction in metabolic energy expenditure, which is assumed to be beneficial and might contribute to its invasive success.

At which surface roughness do claws cling? Investigations with larvae of the running water mayfly Epeorus assimilis (Heptageniidae, Ephemeroptera).

Tarsal claws, which are common attachment devices in arthropods, interlock with the surface irregularities of the substrata. Most insects have two tarsal claws, but the larvae of some aquatic insects, such as Ephemeroptera and Trichoptera, bear only one claw on their tarsi. The range of surface roughness that is sufficient for the function of the single claws of aquatic invertebrates has not yet been investigated. In the present study, we investigated the surface texture required for the function of the claws of larvae of the mayfly, Epeorus assimilis. We conducted attachment experiments using replications with defined surface roughness, white light profilometry, videotaping and scanning electron microscopy. The results demonstrate that the choice of an appropriate roughness order is very important. A setting resulting in a cut-off length of approximately thirty times the diameter of the claw tip proved most appropriate for describing the roughness order that is relevant for the functioning of the claws of E. assimilis larvae. Common technical roughness parameters such as R(a), R(q) or R(z) supplied sufficient differentiation between the tested substrata. E. assimilis larvae require a minimum surface roughness (R(a)∼6.0µm) for their claws to grip. At lesser surface roughness, the larvae left the substratum. This was surprising because E. assimilis larvae have been observed to attach even to smooth surfaces. Based on the use of sterile substrata in this experiment, we assume that coverage with biofilm considerably influences the attachment of the larvae.

The management of metabolic energy storage during the life cycle of mayflies: a comparative field investigation of the collector-gatherer Ephemera danica and the scraper Rhithrogena semicolorata.

The concentration and seasonal dynamics of the major energy storage components, triglycerides and glycogen, were measured in two species of mayfly (Rhithrogena semicolorata and Ephemera danica) with contrasting life cycle strategies living in a small mountain stream. E. danica is a burrowing, semivoltine collector-gatherer; R. semicolorata is univoltine and scrapes periphyton from stones. This is the first publication which focuses on the role of metabolic energy sources during the larval life span of two mayfly species until the larvae emerge. Although triglycerides are the major energy reserve in both species (>84% of total energy storage) throughout the whole larval development their seasonal dynamic differed considerably. In R. semicolorata the triglyceride concentration declined during the last weeks prior to emergence in both sexes. The same pattern was found in female larvae of E. danica, but not in male E. danica. It is suggested that females use triglycerides in the last larval stages for egg maturation, which is completed in the last larval instar. In male E. danica the triglyceride concentrations remained high until emergence, presumably due to their high energy demands as adults for their swarming flights. Glycogen concentrations did not show such a difference between species and sexes. Its significance as a storage substrate for energy is rather low; however, concentrations decreased in both species and sexes prior to emergence.