RESUMO
This work demonstrates the first application of direct broadband (1 GHz-30 GHz) quality (Q) factor measurements of the uniform precession mode in magnetised garnet spheres for the accurate determination of the room-temperature intrinsic ferromagnetic linewidth (ΔH). The spheres were enclosed in a subwavelength cavity, so that the measured Q-factor depended mainly on their magnetic losses and the conduction losses of the cavity walls. The contribution of the latter is assessed by means of the recently proposed magnetic plasmon resonance model and has been found to be negligible. A total of 10 samples made from commercially available pure yttrium iron garnet (YIG) and gallium-substituted YIG have been measured, differing in diameter and/or saturation magnetisation Ms. The dependence of the intrinsic ΔH on the internal magnetic field is found to have near-perfect linear dependence, which cannot be said about the typically studied extrinsic ΔH even at high frequencies. It is found that the difference between the two linewidths, which becomes significant at low frequencies, can be attributed to a geometric effect. Due to its fundamental nature, this work is applicable not only to magnetic material characterization, but also to the study of the origins of losses in magnetic materials.
RESUMO
Resonance in a ferromagnetic sphere, known in the body of literature as the mode of uniform precession, has recently been proven to be magnetic plasmon resonance (MPR). This finding has prompted research which is presented in this paper on the relation between the Q-factor at the MPR and the ferromagnetic resonance (FMR) linewidth ΔH, which is a parameter of magnetized gyromagnetic materials. It is proven in this paper that ΔH can be unequivocally determined from the Q-factor measured at the MPR, if all losses in the resonance system are properly accounted for. It can be undertaken through a rigorous but simple electrodynamic study involving the transcendental equation, as proposed in this paper. The present study also reveals that electric losses have a substantially reduced impact on ΔH due to the large magnetic to electric energy storage ratio at the MPR. Theoretical results are supported by measurements of the Q-factors on a monocrystalline yttrium iron garnet (YIG) sphere.
RESUMO
Numerical solutions of coupled Maxwell and Landau-Lifshitz-Gilbert equations for a magnetized yttrium iron garnet (YIG) sphere acting as a one-stage filter are presented. The filter is analysed using finite-difference time-domain technique. Contrary to the state of the art, the study shows that the maximum electromagnetic power transmission through the YIG filter occurs at the frequency of the magnetic plasmon resonance with the effective permeability of the gyromagnetic medium µr ≈ -2, and not at a ferromagnetic resonance frequency. Such a new understanding of the YIG filter operation, makes it one of the most commonly used single-negative plasmonic metamaterials. The frequency of maximum transmission is also found to weakly depend on the size of the YIG sphere. An analytic electromagnetic analysis of resonances in a YIG sphere is performed for circularly polarized electromagnetic fields. The YIG sphere is situated in a free space and in a large spherical cavity. The study demonstrates that both volume resonances and magnetic plasmon resonances can be solutions of the same transcendental equations.
RESUMO
Phenomena of the radiation coupling to the field effect transistors based terahertz (THz) detectors are studied. We show that in the case of planar metal antennas a significant portion of incoming radiation, instead of being coupled to the transistors, is coupled to an antenna substrate leading to responsivity losses and/or cross-talk effects in the field effect based THz detector arrays. Experimental and theoretical investigations of the responsivity versus substrate thickness are performed. They clearly show how to minimize the losses by the detector/ array substrate thinning. In conclusion simple quantitative rules of losses minimization by choosing a proper substrate thickness of field effect transistor THz detectors are presented for common materials (Si, GaAs, InP, GaN) used in semiconductor technologies.
RESUMO
A practical implementation of a hybrid simulation system capable of modeling coupled electromagnetic-thermodynamic problems typical in microwave heating is described. The paper presents two approaches to modeling such problems. Both are based on an FDTD-based commercial electromagnetic solver coupled to an external thermodynamic analysis tool required for calculations of heat diffusion. The first approach utilizes a simple FDTD-based thermal solver while in the second it is replaced by a universal commercial CFD solver. The accuracy of the two modeling systems is verified against the original experimental data as well as the measurement results available in literature.